[v1,1/4] dt: thermal: tsens: Add bindings for qcs404
diff mbox series

Message ID 102083e3ea93f48085b93f8df307967689ea18d6.1539627762.git.amit.kucheria@linaro.org
State Superseded
Headers show
Series
  • thermal: tsens: Add support for QCS404 platform
Related show

Commit Message

Amit Kucheria Oct. 15, 2018, 6:40 p.m. UTC
qcs404 uses v1 of the TSENS IP block. Create a fallback DT property
"qcom,tsens-v1" to gather common code.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 3 +++
 1 file changed, 3 insertions(+)

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 1d9e8cf61018..799de3062352 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -8,9 +8,12 @@  Required properties:
     - "qcom,msm8996-tsens" (MSM8996)
     - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
     - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
+    - "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404)
   The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
   with version 2 of the TSENS IP. MSM8996 is the only exception because the
   generic property did not exist when support was added.
+  Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for
+  any SoC with version 1 of the TSENS IP.
 
 - reg: Address range of the thermal registers.
   New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM