Show patches with: Submitter = Florian Fainelli       |    State = Action Required       |    Archived = No       |   85 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[net-next] net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278 [net-next] net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278 - - - 0 0 0 2020-02-15 Florian Fainelli In Next
[net-next,3/3] net: phy: broadcom: Wire suspend/resume for BCM54810 net: phy: Better support for BCM54810 - 1 - 0 0 0 2020-02-14 Florian Fainelli New
[net-next,2/3] net: phy: broadcom: Have bcm54xx_adjust_rxrefclk() check for flags net: phy: Better support for BCM54810 - - - 0 0 0 2020-02-14 Florian Fainelli New
[net-next,1/3] net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk() net: phy: Better support for BCM54810 - 1 - 0 0 0 2020-02-14 Florian Fainelli New
[net,v2] net: dsa: b53: Ensure the default VID is untagged [net,v2] net: dsa: b53: Ensure the default VID is untagged - - - 0 0 0 2020-02-14 Florian Fainelli In Next
phy: brcm-sata: Correct MDIO operations for 40nm platforms phy: brcm-sata: Correct MDIO operations for 40nm platforms - - - 0 0 0 2020-02-12 Florian Fainelli New
[net] net: dsa: Treat VLAN ID 0 as PVID untagged [net] net: dsa: Treat VLAN ID 0 as PVID untagged - - - 0 0 0 2020-02-12 Florian Fainelli New
[v2,12/12] dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,11/12] dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg' dt-bindings: arm: bcm: Convert boards to YAML 1 - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,10/12] dt-bindings: arm: bcm: Convert Vulcan to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,09/12] dt-bindings: arm: bcm: Convert BCM11351 to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,08/12] dt-bindings: arm: bcm: Convert BCM4708 to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,07/12] dt-bindings: arm: bcm: Convert BCM23550 to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,06/12] dt-bindings: arm: bcm: Convert BCM21664 to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,05/12] dt-bindings: arm: bcm: Convert Stingray to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,04/12] dt-bindings: arm: bcm: Convert Northstar 2 to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,03/12] dt-bindings: arm: bcm: Convert Northstar Plus to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,02/12] dt-bindings: arm: bcm: Convert Hurricane 2 to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
[v2,01/12] dt-bindings: arm: bcm: Convert Cygnus to YAML dt-bindings: arm: bcm: Convert boards to YAML - - - 0 0 0 2020-02-04 Florian Fainelli New
pwm: bcm2835: Dynamically allocate base pwm: bcm2835: Dynamically allocate base 1 1 - 0 0 0 2020-02-03 Florian Fainelli New
[stable-4.9] Documentation: Document arm64 kpti control [stable-4.9] Documentation: Document arm64 kpti control - 1 - 0 0 0 2020-01-28 Florian Fainelli New
[net-next] net: systemport: Do not block interrupts in TX reclaim [net-next] net: systemport: Do not block interrupts in TX reclaim - - - 0 0 0 2020-01-24 Florian Fainelli New
[stable,4.9] arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field [stable,4.9] arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field - - - 0 0 0 2020-01-24 Florian Fainelli New
[v7,7/7] ARM: Enable KASan for ARM KASan for arm 1 - 1 0 0 0 2020-01-17 Florian Fainelli New
[v7,6/7] ARM: Initialize the mapping of KASan shadow memory KASan for arm - - 1 0 0 0 2020-01-17 Florian Fainelli New
[v7,5/7] ARM: Define the virtual space of KASan's shadow region KASan for arm - - 1 0 0 0 2020-01-17 Florian Fainelli New
[v7,4/7] ARM: Replace memory function for kasan KASan for arm - - 1 0 0 0 2020-01-17 Florian Fainelli New
[v7,3/7] ARM: Disable instrumentation for some code KASan for arm - - 1 0 0 0 2020-01-17 Florian Fainelli New
[v7,2/7] ARM: Add TTBR operator for kasan_init KASan for arm - - 1 0 0 0 2020-01-17 Florian Fainelli New
[v7,1/7] ARM: Moved CP15 definitions from kvm_hyp.h to cp15.h KASan for arm - - 1 0 0 0 2020-01-17 Florian Fainelli New
ARM: VDSO: Match ARMv8 timer in cntvct_functional() ARM: VDSO: Match ARMv8 timer in cntvct_functional() - - - 0 0 0 2020-01-16 Florian Fainelli New
[net] Revert "net: stmmac: platform: Fix MDIO init for platforms without PHY" [net] Revert "net: stmmac: platform: Fix MDIO init for platforms without PHY" - - - 0 0 0 2020-01-07 Florian Fainelli New
[v3,2/2] reset: Add Broadcom STB RESCAL reset controller reset: Add Broadcom STB RESCAL reset controller - - - 0 0 0 2020-01-03 Florian Fainelli New
[v3,1/2] dt-bindings: reset: Document BCM7216 RESCAL reset controller reset: Add Broadcom STB RESCAL reset controller - 1 - 0 0 0 2020-01-03 Florian Fainelli New
[net-next] net: dsa: Remove indirect function call for flow dissection [net-next] net: dsa: Remove indirect function call for flow dissection - - - 0 0 0 2020-01-02 Florian Fainelli New
[2/2] watchdog: Relax dependencies for CONFIG_WDT_MTX1 watchdog: mtx-1: Relax build dependencies - - - 0 0 0 2019-12-11 Florian Fainelli New
[1/2] watchdog: mtx-1: Drop au1000.h header inclusion watchdog: mtx-1: Relax build dependencies - - - 0 0 0 2019-12-11 Florian Fainelli New
[v2,6/6] thermal: brcmstb_thermal: Register different ops per process brcmstb_thermal updates for new processes - 1 - 0 0 0 2019-12-11 Florian Fainelli New
[v2,5/6] thermal: brcmstb_thermal: Restructure interrupt registration brcmstb_thermal updates for new processes - 1 - 0 0 0 2019-12-11 Florian Fainelli New
[v2,4/6] thermal: brcmstb_thermal: Add 16nm process thermal parameters brcmstb_thermal updates for new processes - 1 - 0 0 0 2019-12-11 Florian Fainelli New
[v2,3/6] dt-bindings: thermal: Define BCM7216 thermal sensor compatible brcmstb_thermal updates for new processes - 1 - 0 0 0 2019-12-11 Florian Fainelli New
[v2,2/6] thermal: brcmstb_thermal: Prepare to support a different process brcmstb_thermal updates for new processes - - - 0 0 0 2019-12-11 Florian Fainelli New
[v2,1/6] thermal: brcmstb_thermal: Do not use DT coefficients brcmstb_thermal updates for new processes - - - 0 0 0 2019-12-11 Florian Fainelli New
[2/2] reset: Add Broadcom STB RESCAL reset controller reset: Add Broadcom STB RESCAL reset controller - - - 0 0 0 2019-12-10 Florian Fainelli New
[1/2] dt-bindings: reset: Document BCM7216 RESCAL reset controller reset: Add Broadcom STB RESCAL reset controller - - - 0 0 0 2019-12-10 Florian Fainelli New
[8/8] ata: ahci_brcm: Support BCM7216 reset controller name ata: ahci_brcm: Fixes and new device support - - - 0 0 0 2019-12-10 Florian Fainelli In Next
[7/8] dt-bindings: ata: Document BCM7216 AHCI controller compatible ata: ahci_brcm: Fixes and new device support - 1 - 0 0 0 2019-12-10 Florian Fainelli In Next
[6/8] ata: ahci_brcm: Add a shutdown callback ata: ahci_brcm: Fixes and new device support - - - 0 0 0 2019-12-10 Florian Fainelli In Next
[5/8] ata: ahci_brcm: Manage reset line during suspend/resume ata: ahci_brcm: Fixes and new device support - - - 0 0 0 2019-12-10 Florian Fainelli In Next
[4/8] ata: ahci_brcm: Add missing clock management during recovery ata: ahci_brcm: Fixes and new device support - - - 0 0 0 2019-12-10 Florian Fainelli In Next
[3/8] ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE ata: ahci_brcm: Fixes and new device support - - - 0 0 0 2019-12-10 Florian Fainelli In Next
[2/8] ata: ahci_brcm: Fix AHCI resources management ata: ahci_brcm: Fixes and new device support - - - 0 0 0 2019-12-10 Florian Fainelli In Next
[1/8] ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys() ata: ahci_brcm: Fixes and new device support - - - 0 0 0 2019-12-10 Florian Fainelli In Next
[v2] reset: brcmstb: Fix resource checks [v2] reset: brcmstb: Fix resource checks - - - 0 0 0 2019-11-01 Florian Fainelli New
[6/6] thermal: brcmstb_thermal: Register different ops per process brcmstb_thermal updates for new processes - 1 - 0 0 0 2019-10-30 Florian Fainelli New
[5/6] thermal: brcmstb_thermal: Restructure interrupt registration brcmstb_thermal updates for new processes - 1 - 0 0 0 2019-10-30 Florian Fainelli New
[4/6] thermal: brcmstb_thermal: Add 16nm process thermal parameters brcmstb_thermal updates for new processes - 1 - 0 0 0 2019-10-30 Florian Fainelli New
[3/6] dt-bindings: thermal: Define BCM7216 thermal sensor compatible brcmstb_thermal updates for new processes - 1 - 0 0 0 2019-10-30 Florian Fainelli New
[2/6] thermal: brcmstb_thermal: Prepare to support a different process brcmstb_thermal updates for new processes - - - 0 0 0 2019-10-30 Florian Fainelli New
[1/6] thermal: brcmstb_thermal: Do not use DT coefficients brcmstb_thermal updates for new processes - - - 0 0 0 2019-10-30 Florian Fainelli New
arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core - - - 0 0 0 2019-10-29 Florian Fainelli New
irqchip/gic: Check interrupt type validity irqchip/gic: Check interrupt type validity - - - 0 0 0 2019-10-23 Florian Fainelli New
[RFC,2/2] irqchip/gic: Allow the use of SGI interrupts irqchip/gic: Allow the use of SGI interrupts - - - 0 0 0 2019-10-23 Florian Fainelli New
[RFC,1/2] dt-bindings: Define interrupt type for SGI interrupts irqchip/gic: Allow the use of SGI interrupts - - - 0 0 0 2019-10-23 Florian Fainelli New
mtd: rawnand: brcmnand: Fix sparse warning in has_flash_dma() mtd: rawnand: brcmnand: Fix sparse warning in has_flash_dma() - - - 0 0 0 2019-10-18 Florian Fainelli New
[net-next,v2,2/2] net: phy: Add ability to debug RGMII connections net: phy: Add ability to debug RGMII - - - 0 0 0 2019-10-17 Florian Fainelli New
[net-next,v2,1/2] net: phy: Use genphy_loopback() by default net: phy: Add ability to debug RGMII - 1 - 0 0 0 2019-10-17 Florian Fainelli New
[net-next,2/2] net: phy: Add ability to debug RGMII connections net: phy: Add ability to debug RGMII connections - - - 0 0 0 2019-10-15 Florian Fainelli New
[net-next,1/2] net: phy: Use genphy_loopback() by default net: phy: Add ability to debug RGMII connections - - - 0 0 0 2019-10-15 Florian Fainelli New
[7/7] irqchip/irq-bcm283x: Add registration prints irqchip/irq-bcm283x update for BCM7211 - - - 0 0 0 2019-10-01 Florian Fainelli New
[6/7] irqchip: Build BCM283X_IRQ for ARCH_BRCMSTB irqchip/irq-bcm283x update for BCM7211 - - - 0 0 0 2019-10-01 Florian Fainelli New
[5/7] irqchip/irq-bcm2836: Add support for the 7211 interrupt controller irqchip/irq-bcm283x update for BCM7211 - - - 0 0 0 2019-10-01 Florian Fainelli New
[4/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-l1-intc binding irqchip/irq-bcm283x update for BCM7211 - 1 - 0 0 0 2019-10-01 Florian Fainelli New
[3/7] irqchip/irq-bcm2835: Add support for 7211 interrupt controller irqchip/irq-bcm283x update for BCM7211 - - - 0 0 0 2019-10-01 Florian Fainelli New
[2/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-armctrl-ic binding irqchip/irq-bcm283x update for BCM7211 - 1 - 0 0 0 2019-10-01 Florian Fainelli New
[1/7] irqchip: Introduce Kconfig symbol to build irq-bcm283x.c irqchip/irq-bcm283x update for BCM7211 - - - 0 0 0 2019-10-01 Florian Fainelli New
[v2,5/5] irqchip/irq-bcm7038-l1: Support brcm,int-fwd-mask irqchip/irq-bcm7038-l1 updates - - - 0 0 0 2019-09-13 Florian Fainelli New
[v2,4/5] dt-bindings: Document brcm,int-fwd-mask property for bcm7038-l1-intc irqchip/irq-bcm7038-l1 updates 1 - - 0 0 0 2019-09-13 Florian Fainelli New
[v2,3/5] irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary irqchip/irq-bcm7038-l1 updates - - - 0 0 0 2019-09-13 Florian Fainelli New
[v2,2/5] dt-bindings: Document brcm,irq-can-wake for brcm,bcm7038-l1-intc.txt irqchip/irq-bcm7038-l1 updates 1 - - 0 0 0 2019-09-13 Florian Fainelli New
[v2,1/5] irqchip/irq-bcm7038-l1: Add PM support irqchip/irq-bcm7038-l1 updates - - - 0 0 0 2019-09-13 Florian Fainelli New
[net-next] net: dsa: b53: Add support for port_egress_floods callback [net-next] net: dsa: b53: Add support for port_egress_floods callback - 1 - 0 0 0 2019-09-13 Florian Fainelli New
[v2,2/2] reset: Add Broadcom STB SW_INIT reset controller driver reset: Add Broadcom STB SW_INIT reset controller driver - - - 0 0 0 2019-01-15 Florian Fainelli In Next
[v2,1/2] dt-bindings: reset: Add document for Broadcom STB reset controller reset: Add Broadcom STB SW_INIT reset controller driver - 1 - 0 0 0 2019-01-15 Florian Fainelli In Next
Revert "serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250" Revert "serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250" - - - 0 0 0 2018-12-21 Florian Fainelli In Next