Show patches with: Submitter = Andy Shevchenko       |    State = Action Required       |    Archived = No       |   114 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v1] mfd: intel-lpss: Add Intel Comet Lake PCI IDs [v1] mfd: intel-lpss: Add Intel Comet Lake PCI IDs - - - 0 0 0 2019-04-09 Andy Shevchenko New
[v1] dmaengine: idma64: Move driver name to the header [v1] dmaengine: idma64: Move driver name to the header - - - 0 0 0 2019-04-09 Andy Shevchenko New
[v1,4/4] platform/x86: intel_punit_ipc: Revert "Fix resource ioremap warning" [v1,1/4] platform/x86: intel_pmc_ipc: Use BIT() macro - 1 - 0 0 0 2019-04-09 Andy Shevchenko New
[v1,3/4] platform/x86: intel_pmc_ipc: Don't map non-used optional resources [v1,1/4] platform/x86: intel_pmc_ipc: Use BIT() macro - 1 - 0 0 0 2019-04-09 Andy Shevchenko New
[v1,2/4] platform/x86: intel_pmc_ipc: Apply same width for offset definitions [v1,1/4] platform/x86: intel_pmc_ipc: Use BIT() macro - 1 - 0 0 0 2019-04-09 Andy Shevchenko New
[v1,1/4] platform/x86: intel_pmc_ipc: Use BIT() macro [v1,1/4] platform/x86: intel_pmc_ipc: Use BIT() macro - 1 - 0 0 0 2019-04-09 Andy Shevchenko New
[v2] driver core: platform: Propagate error from insert_resource() [v2] driver core: platform: Propagate error from insert_resource() - 1 - 0 0 0 2019-04-04 Andy Shevchenko New
[v2] mfd: Add support for Merrifield Basin Cove PMIC [v2] mfd: Add support for Merrifield Basin Cove PMIC - - - 0 0 0 2019-03-26 Andy Shevchenko New
[v1,2/2] lib/math: Move int_pow() from pwm_bl.c for wider use Untitled series #387832 - - - 0 0 0 2019-03-23 Andy Shevchenko New
[v1,1/2] lib: Move mathematic helpers to separate folder [v1,1/2] lib: Move mathematic helpers to separate folder - - - 0 0 0 2019-03-23 Andy Shevchenko New
[v1] lib/generic-radix-tree: Make good use of while (level--) [v1] lib/generic-radix-tree: Make good use of while (level--) - - - 0 0 0 2019-03-21 Andy Shevchenko New
[v2,7/7] x86/boot: Support nocfg parameter for earlyprintk x86/boot: Enable earlyprintk for HS UARTs - - - 0 0 0 2019-03-19 Andy Shevchenko New
[v2,6/7] x86/boot: Introduce MMIO accessors and their support in earlyprintk x86/boot: Enable earlyprintk for HS UARTs - - - 0 0 0 2019-03-19 Andy Shevchenko New
[v2,5/7] x86/boot: Add MMIO byte accessors x86/boot: Enable earlyprintk for HS UARTs - - - 0 0 0 2019-03-19 Andy Shevchenko New
[v2,4/7] x86/boot: Allow longer parameter list for earlyprintk x86/boot: Enable earlyprintk for HS UARTs - - - 0 0 0 2019-03-19 Andy Shevchenko New
[v2,3/7] x86/boot: Split out parse_serial_port() helper for earlyprintk x86/boot: Enable earlyprintk for HS UARTs - - - 0 0 0 2019-03-19 Andy Shevchenko New
[v2,2/7] x86/boot: Introduce helpers for serial I/O x86/boot: Enable earlyprintk for HS UARTs - - - 0 0 0 2019-03-19 Andy Shevchenko New
[v2,1/7] x86/boot: Convert early_serial_base to unsigned long x86/boot: Enable earlyprintk for HS UARTs - - - 0 0 0 2019-03-19 Andy Shevchenko New
[v2,2/2] extcon: mrfld: Introduce extcon driver for Basin Cove PMIC extcon: Introduce support of Basin Cove PMIC - - - 0 0 0 2019-03-19 Andy Shevchenko In Next
[v2,1/2] extcon: intel: Split out some definitions to a common header extcon: Introduce support of Basin Cove PMIC - - - 0 0 0 2019-03-19 Andy Shevchenko In Next
[v2] platform/x86: Add support for Basin Cove power button [v2] platform/x86: Add support for Basin Cove power button - - - 0 0 0 2019-03-19 Andy Shevchenko New
[v1] dmaengine: idma64: Use actual device for DMA transfers [v1] dmaengine: idma64: Use actual device for DMA transfers 2 - - 0 0 0 2019-03-18 Andy Shevchenko In Next
[v1,2/2] extcon: mrfld: Introduce extcon driver for Basin Cove PMIC [v1,1/2] extcon: intel: Split out some definitions to a common header - - - 0 0 0 2019-03-18 Andy Shevchenko New
[v1,1/2] extcon: intel: Split out some definitions to a common header [v1,1/2] extcon: intel: Split out some definitions to a common header - - - 0 0 0 2019-03-18 Andy Shevchenko New
[v1,4/4] auxdisplay: hd44780: Convert to use charlcd_free() [v1,1/4] auxdisplay: hd44780: Fix memory leak on ->remove() - - - 0 0 0 2019-03-12 Andy Shevchenko New
[v1,3/4] auxdisplay: panel: Convert to use charlcd_free() [v1,1/4] auxdisplay: hd44780: Fix memory leak on ->remove() - - - 0 0 0 2019-03-12 Andy Shevchenko New
[v1,2/4] auxdisplay: charlcd: Introduce charlcd_free() helper [v1,1/4] auxdisplay: hd44780: Fix memory leak on ->remove() - - - 0 0 0 2019-03-12 Andy Shevchenko New
[v1,1/4] auxdisplay: hd44780: Fix memory leak on ->remove() [v1,1/4] auxdisplay: hd44780: Fix memory leak on ->remove() - - - 0 0 0 2019-03-12 Andy Shevchenko New
[v1] lib/test_printf: Switch to bitmap_zalloc() [v1] lib/test_printf: Switch to bitmap_zalloc() - 1 - 0 0 0 2019-03-04 Andy Shevchenko In Next
[v1,2/2] x86/cpu: Split Tremont based Atoms from the rest [v1,1/2] x86/cpu: Allow INTEL_CPU_FAM_ANY() to take integers - - - 0 0 0 2019-02-15 Andy Shevchenko New
[v1,1/2] x86/cpu: Allow INTEL_CPU_FAM_ANY() to take integers [v1,1/2] x86/cpu: Allow INTEL_CPU_FAM_ANY() to take integers - - - 0 0 0 2019-02-15 Andy Shevchenko New
[v1] MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS [v1] MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS - - - 0 0 0 2019-02-11 Andy Shevchenko New
[v2] lightnvm: pblk: Switch to use new generic UUID API [v2] lightnvm: pblk: Switch to use new generic UUID API - 1 - 0 0 0 2019-01-24 Andy Shevchenko New
[v1] : Switch to use new generic UUID API [v1] : Switch to use new generic UUID API - - - 0 0 0 2019-01-10 Andy Shevchenko New
[v1] fs/jfs: Switch to use new generic UUID API [v1] fs/jfs: Switch to use new generic UUID API - - - 0 0 0 2019-01-10 Andy Shevchenko New
[v2,3/3] ACPI / x86: utils: Get rid of custom ICPU() macro [v2,1/3] x86/cpu: Introduce INTEL_CPU_FAM*_NODATA() helper macros 1 - - 0 0 0 2019-01-09 Andy Shevchenko New
[v2,2/3] ACPI / LPSS: Get rid of custom ICPU() macro [v2,1/3] x86/cpu: Introduce INTEL_CPU_FAM*_NODATA() helper macros 1 - - 0 0 0 2019-01-09 Andy Shevchenko New
[v2,1/3] x86/cpu: Introduce INTEL_CPU_FAM*_NODATA() helper macros [v2,1/3] x86/cpu: Introduce INTEL_CPU_FAM*_NODATA() helper macros - - - 0 0 0 2019-01-09 Andy Shevchenko New
[v1] seq_file: convert mangle_path() to use string_escape_str() [v1] seq_file: convert mangle_path() to use string_escape_str() - - - 0 0 0 2019-01-09 Andy Shevchenko New
[RFT,v1] gpiolib: acpi: Introduce ACPI_GPIO_QUIRK_ONLY_GPIOIO [RFT,v1] gpiolib: acpi: Introduce ACPI_GPIO_QUIRK_ONLY_GPIOIO - - - 0 0 0 2019-01-08 Andy Shevchenko New
[v1,4/4] usb: host: xhci-tegra: Switch to use %ptT [v1,1/4] lib/vsprintf: Print time64_t in human readable format - - - 0 0 0 2019-01-04 Andy Shevchenko New
[v1,3/4,media] usb: pulse8-cec: Switch to use %ptT [v1,1/4] lib/vsprintf: Print time64_t in human readable format - - - 0 0 0 2019-01-04 Andy Shevchenko New
[v1,2/4] ARM: bcm2835: Switch to use %ptT [v1,1/4] lib/vsprintf: Print time64_t in human readable format - - - 0 0 0 2019-01-04 Andy Shevchenko New
[v1,1/4] lib/vsprintf: Print time64_t in human readable format [v1,1/4] lib/vsprintf: Print time64_t in human readable format - - - 0 0 0 2019-01-04 Andy Shevchenko New
[GIT,PULL] platform-drivers-x86 for 4.21-1 [GIT,PULL] platform-drivers-x86 for 4.21-1 - - - 0 0 0 2018-12-12 Andy Shevchenko New
[v6,20/20] PM: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] 1 - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,19/20] m68k/mac: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] 1 1 - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,18/20] Input: hp_sdc_rtc - Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] 1 - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,17/20] rtc: tegra: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] 1 - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,16/20] rtc: s5m: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - 1 - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,15/20] rtc: s3c: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,14/20] rtc: rx8025: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,13/20] rtc: rx6110: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,12/20] rtc: rk808: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,11/20] rtc: puv3: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,10/20] rtc: pm8xxx: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,09/20] rtc: pic32: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,08/20] rtc: pcf50633: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,07/20] rtc: mcp795: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,06/20] rtc: m48t59: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,05/20] rtc: m41t80: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,04/20] rtc: at91sam9: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,03/20] rtc: at91rm9200: Switch to use %ptR Untitled series #375208 - - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,02/20] rtc: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] 1 - - 0 0 0 2018-12-04 Andy Shevchenko New
[v6,01/20] lib/vsprintf: Print time and date in human readable format via %pt lib, rtc: Print rtc_time via %ptR[dt][r] - 1 - 0 0 0 2018-12-04 Andy Shevchenko New
[v2] driver core: platform: Respect return code of platform_device_register_full() [v2] driver core: platform: Respect return code of platform_device_register_full() - - - 0 0 0 2018-12-03 Andy Shevchenko New
[v5,21/21] PM: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] 1 - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,20/21] m68k/mac: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] 1 1 - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,19/21] Input: hp_sdc_rtc - Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] 1 - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,18/21] rtc: tegra: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] 1 - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,17/21] rtc: s5m: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - 1 - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,16/21] rtc: s3c: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,15/21] rtc: rx8025: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,14/21] rtc: rx6110: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,13/21] rtc: rk808: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,12/21] rtc: puv3: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,11/21] rtc: pm8xxx: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,10/21] rtc: pic32: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,09/21] rtc: pcf50633: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,08/21] rtc: mcp795: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,07/21] rtc: m48t59: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,06/21] rtc: m41t80: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,05/21] rtc: at91sam9: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,04/21] rtc: at91rm9200: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,03/21] rtc: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][r] 1 - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,02/21] lib/vsprintf: Print time and date in human readable format via %pt lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v5,01/21] nvmem: Move nvmem_type_str array to its only user lib, rtc: Print rtc_time via %ptR[dt][r] - - - 0 0 0 2018-11-29 Andy Shevchenko New
[v3,20/20] PM: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] 1 - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,19/20] mk68/mac: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,18/20] Input: hp_sdc_rtc - Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] 1 - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,17/20] rtc: tegra: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,16/20] rtc: s5m: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - 1 - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,15/20] rtc: s3c: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,14/20] rtc: rx8025: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,13/20] rtc: rx6110: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,12/20] rtc: rk808: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,11/20] rtc: puv3: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,10/20] rtc: pm8xxx: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,09/20] rtc: pic32: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - - - 0 0 0 2018-11-13 Andy Shevchenko New
[v3,08/20] rtc: pcf50633: Switch to use %ptR lib, rtc: Print rtc_time via %ptR[dt][rv] - - - 0 0 0 2018-11-13 Andy Shevchenko New
« 1 2 »