Show patches with: Submitter = Baolin Wang       |    State = Action Required       |    Archived = No       |   48 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
serial: sprd: Add loopback function support serial: sprd: Add loopback function support - - - 0 0 0 2019-08-21 Baolin Wang New
[2/2] nvmem: sprd: Add Spreadtrum SoCs eFuse support [1/2] dt-bindings: nvmem: Add Spreadtrum eFuse controller documentation - - - 0 0 0 2019-08-16 Baolin Wang New
[1/2] dt-bindings: nvmem: Add Spreadtrum eFuse controller documentation [1/2] dt-bindings: nvmem: Add Spreadtrum eFuse controller documentation - - - 0 0 0 2019-08-16 Baolin Wang New
[v3,2/2] pwm: sprd: Add Spreadtrum PWM support [v3,1/2] dt-bindings: pwm: sprd: Add Spreadtrum PWM documentation - - - 0 0 0 2019-08-14 Baolin Wang New
[v3,1/2] dt-bindings: pwm: sprd: Add Spreadtrum PWM documentation [v3,1/2] dt-bindings: pwm: sprd: Add Spreadtrum PWM documentation - - - 0 0 0 2019-08-14 Baolin Wang New
[v2,2/2] pwm: sprd: Add Spreadtrum PWM support [v2,1/2] dt-bindings: pwm: sprd: Add Spreadtrum PWM documentation - - - 0 0 0 2019-08-13 Baolin Wang New
[v2,1/2] dt-bindings: pwm: sprd: Add Spreadtrum PWM documentation [v2,1/2] dt-bindings: pwm: sprd: Add Spreadtrum PWM documentation - - - 0 0 0 2019-08-13 Baolin Wang New
[2/2] pwm: sprd: Add Spreadtrum PWM support [1/2] dt-bindings: pwm: sprd: Add Spreadtrum PWM documentation - - - 0 0 0 2019-08-08 Baolin Wang New
[1/2] dt-bindings: pwm: sprd: Add Spreadtrum PWM documentation [1/2] dt-bindings: pwm: sprd: Add Spreadtrum PWM documentation - - - 0 0 0 2019-08-08 Baolin Wang New
[6/6] power: supply: sc27xx: Add POWER_SUPPLY_PROP_CALIBRATE attribute Optimize the Spreadtrum SC27xx fuel gauge - - - 0 0 0 2019-07-31 Baolin Wang New
[5/6] power: supply: sc27xx: Make sure the alarm capacity is larger than 0 Optimize the Spreadtrum SC27xx fuel gauge - - - 0 0 0 2019-07-31 Baolin Wang New
[4/6] power: supply: sc27xx: Optimize the battery capacity calibration Optimize the Spreadtrum SC27xx fuel gauge - - - 0 0 0 2019-07-31 Baolin Wang New
[3/6] power: supply: sc27xx: Fix the the accuracy issue of coulomb calculation Optimize the Spreadtrum SC27xx fuel gauge - - - 0 0 0 2019-07-31 Baolin Wang New
[2/6] power: supply: sc27xx: Fix conditon to enable the FGU interrupt Optimize the Spreadtrum SC27xx fuel gauge - - - 0 0 0 2019-07-31 Baolin Wang New
[1/6] power: supply: sc27xx: Add POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN attribute Optimize the Spreadtrum SC27xx fuel gauge - - - 0 0 0 2019-07-31 Baolin Wang New
[6/6] dt-bindings: spi: sprd: Change the hwlock support to be optional Optimize Spreadtrum ADI driver - - - 0 0 0 2019-07-26 Baolin Wang In Next
[5/6] spi: sprd: adi: Change hwlock to be optional Optimize Spreadtrum ADI driver - - - 0 0 0 2019-07-26 Baolin Wang In Next
[4/6] spi: sprd: adi: Add a reset reason for watchdog mode Optimize Spreadtrum ADI driver - - - 0 0 0 2019-07-26 Baolin Wang In Next
[3/6] spi: sprd: adi: Add a reset reason for factory test mode Optimize Spreadtrum ADI driver - - - 0 0 0 2019-07-26 Baolin Wang In Next
[2/6] spi: sprd: adi: Add a reset reason for TOS panic Optimize Spreadtrum ADI driver - - - 0 0 0 2019-07-26 Baolin Wang In Next
[1/6] spi: sprd: adi: Remove redundant address bits setting Optimize Spreadtrum ADI driver - - - 0 0 0 2019-07-26 Baolin Wang In Next
[2/2] pinctrl: sprd: Combine the condition of MISC_PIN and COMMON_PIN [1/2] pinctrl: sprd: Change to use devm_platform_ioremap_resource() - - - 0 0 0 2019-07-25 Baolin Wang In Next
[1/2] pinctrl: sprd: Change to use devm_platform_ioremap_resource() [1/2] pinctrl: sprd: Change to use devm_platform_ioremap_resource() - - - 0 0 0 2019-07-25 Baolin Wang In Next
[3/3] i2c: sprd: Validate the return value of clock initialization [1/3] i2c: sprd: Make I2C driver can be built as a module - - - 0 0 0 2019-07-25 Baolin Wang In Next
[2/3] i2c: sprd: Change to use devm_platform_ioremap_resource() [1/3] i2c: sprd: Make I2C driver can be built as a module - - - 0 0 0 2019-07-25 Baolin Wang In Next
[1/3] i2c: sprd: Make I2C driver can be built as a module [1/3] i2c: sprd: Make I2C driver can be built as a module - - - 0 0 0 2019-07-25 Baolin Wang In Next
iio: adc: sc27xx: Change to polling mode to read data iio: adc: sc27xx: Change to polling mode to read data - - - 0 0 0 2019-07-25 Baolin Wang New
[v5] mmc: host: sdhci: Fix the incorrect soft reset operation when runtime resuming [v5] mmc: host: sdhci: Fix the incorrect soft reset operation when runtime resuming - - - 0 0 0 2019-07-25 Baolin Wang New
[RFC,7/7] mmc: host: sdhci-sprd: Add MMC packed request support Add MMC packed function - - - 0 0 0 2019-07-22 Baolin Wang New
[RFC,6/7] mmc: host: sdhci: Add MMC packed request support Add MMC packed function - - - 0 0 0 2019-07-22 Baolin Wang New
[RFC,5/7] mmc: host: sdhci: Remove redundant sg_count member of struct sdhci_host Add MMC packed function - - - 0 0 0 2019-07-22 Baolin Wang New
[RFC,4/7] mmc: host: sdhci: Factor out the command configuration Add MMC packed function - - - 0 0 0 2019-07-22 Baolin Wang New
[RFC,3/7] mmc: host: sdhci: Introduce ADMA3 transfer mode Add MMC packed function - - - 0 0 0 2019-07-22 Baolin Wang New
[RFC,2/7] mmc: core: Add MMC packed request function Add MMC packed function - - - 0 0 0 2019-07-22 Baolin Wang New
[RFC,1/7] blk-mq: Export blk_mq_hctx_has_pending() function Add MMC packed function - - - 0 0 0 2019-07-22 Baolin Wang New
[v4] mmc: host: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming [v4] mmc: host: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming 1 - - 0 0 0 2019-07-17 Baolin Wang New
mmc: host: sdhci-sprd: Fix the missing pm_runtime_put_noidle() mmc: host: sdhci-sprd: Fix the missing pm_runtime_put_noidle() 1 - - 0 0 0 2019-07-15 Baolin Wang In Next
[v2,9/9] arm64: dts: sprd: Add Spreadtrum SD host controller support Add SD host controller support for SC9860 platform - - - 0 0 0 2019-06-04 Baolin Wang New
[v2,8/9] mmc: sdhci-sprd: Add PHY DLL delay configuration Add SD host controller support for SC9860 platform 1 - - 0 0 0 2019-06-04 Baolin Wang New
[v2,7/9] dt-bindings: mmc: sprd: Add PHY DLL delay documentation Add SD host controller support for SC9860 platform - - - 0 0 0 2019-06-04 Baolin Wang New
[v2,6/9] mmc: sdhci-sprd: Enable PHY DLL to make clock stable Add SD host controller support for SC9860 platform 1 - - 0 0 0 2019-06-04 Baolin Wang New
[v2,5/9] mmc: sdhci-sprd: Add HS400 enhanced strobe mode Add SD host controller support for SC9860 platform 1 - - 0 0 0 2019-06-04 Baolin Wang New
[v2,4/9] mmc: sdhci-sprd: Implement the get_max_timeout_count() interface Add SD host controller support for SC9860 platform 1 - - 0 0 0 2019-06-04 Baolin Wang New
[v2,3/9] mmc: sdhci-sprd: Add optional gate clock support Add SD host controller support for SC9860 platform 1 - - 0 0 0 2019-06-04 Baolin Wang New
[v2,2/9] dt-bindings: mmc: sprd: Add another optional clock documentation Add SD host controller support for SC9860 platform - - - 0 0 0 2019-06-04 Baolin Wang New
[v2,1/9] mmc: sdhci-sprd: Check the enable clock's return value correctly Add SD host controller support for SC9860 platform 1 - - 0 0 0 2019-06-04 Baolin Wang New
[2/2] soc: sprd: Add Spreadtrum multi-channel data transfer support [1/2] dt-bindings: soc: sprd: Add Spreadtrum MCDT documentation - - - 0 0 0 2019-04-19 Baolin Wang New
[1/2] dt-bindings: soc: sprd: Add Spreadtrum MCDT documentation [1/2] dt-bindings: soc: sprd: Add Spreadtrum MCDT documentation - - - 0 0 0 2019-04-19 Baolin Wang New