Show patches with: Submitter = Clemens Gruber       |    State = Action Required       |   66 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v5,7/7] pwm: pca9685: Restrict period change for prescaler users [v5,1/7] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-15 Clemens Gruber New
[v5,6/7] dt-bindings: pwm: pca9685: Add nxp,staggered-outputs property [v5,1/7] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-15 Clemens Gruber New
[v5,5/7] pwm: pca9685: Support staggered output ON times [v5,1/7] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-15 Clemens Gruber New
[v5,4/7] pwm: pca9685: Reset registers to POR state in probe [v5,1/7] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-15 Clemens Gruber New
[v5,3/7] pwm: pca9685: Improve runtime PM behavior [v5,1/7] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-15 Clemens Gruber New
[v5,2/7] pwm: pca9685: Support hardware readout [v5,1/7] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-15 Clemens Gruber New
[v5,1/7] pwm: pca9685: Switch to atomic API [v5,1/7] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-15 Clemens Gruber New
[v4,4/4] dt-bindings: pwm: pca9685: Add nxp,staggered-outputs property [v4,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-07 Clemens Gruber New
[v4,3/4] pwm: pca9685: Support staggered output ON times [v4,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-07 Clemens Gruber New
[v4,2/4] pwm: pca9685: Set full OFF bits in probe [v4,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-07 Clemens Gruber New
[v4,1/4] pwm: pca9685: Switch to atomic API [v4,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-12-07 Clemens Gruber New
[v3,3/4] pwm: pca9685: Support staggered output ON times [v3,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-11-24 Clemens Gruber New
[v3,2/4] pwm: pca9685: Set full OFF bits in probe [v3,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-11-24 Clemens Gruber New
[v3,1/4] pwm: pca9685: Switch to atomic API [v3,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-11-24 Clemens Gruber New
[v2,4/4] dt-bindings: pwm: pca9685: Add staggered-outputs property [v2,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-11-23 Clemens Gruber New
[v2,3/4] pwm: pca9685: Support staggered output ON times [v2,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-11-23 Clemens Gruber New
[v2,2/4] pwm: pca9685: Set full OFF bits in probe [v2,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-11-23 Clemens Gruber New
[v2,1/4] pwm: pca9685: Switch to atomic API [v2,1/4] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-11-23 Clemens Gruber New
dt-bindings: pwm: pca9685: Add staggered-outputs property dt-bindings: pwm: pca9685: Add staggered-outputs property - - - 0 0 0 2020-11-18 Clemens Gruber New
[3/3] pwm: pca9685: Support staggered output ON times [1/3] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-11-18 Clemens Gruber New
[2/3] pwm: pca9685: Set full OFF bits in probe [1/3] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-11-18 Clemens Gruber New
[1/3] pwm: pca9685: Switch to atomic API [1/3] pwm: pca9685: Switch to atomic API - - - 0 0 0 2020-11-18 Clemens Gruber New
dt-bindings: pwm: pca9685: add staggered-outputs property dt-bindings: pwm: pca9685: add staggered-outputs property - - - 0 0 0 2020-11-12 Clemens Gruber New
[2/2] pwm: pca9685: support staggered output ON times [1/2] pwm: pca9685: fix duty cycle loss on disable/enable - - - 0 0 0 2020-11-12 Clemens Gruber New
[1/2] pwm: pca9685: fix duty cycle loss on disable/enable [1/2] pwm: pca9685: fix duty cycle loss on disable/enable - - - 0 0 0 2020-11-12 Clemens Gruber New
net: phy: marvell: Fix pause frame negotiation net: phy: marvell: Fix pause frame negotiation - - - 0 0 0 2020-04-08 Clemens Gruber New
i2c: imx: fix misleading bus recovery debug message i2c: imx: fix misleading bus recovery debug message 1 - - 0 0 0 2017-10-09 Clemens Gruber New
serial: imx: Improve PIO prevention if TX DMA has been started serial: imx: Improve PIO prevention if TX DMA has been started - - - 0 0 0 2017-08-12 Clemens Gruber New
serial: imx: disable DMA for RS-485 on i.MX6 SMP serial: imx: disable DMA for RS-485 on i.MX6 SMP - - 1 0 0 0 2017-06-20 Clemens Gruber New
[2/2] pwm: pca9685: fix prescaler initialization [1/2] pwm: pca9685: fix period change with same duty cycle - - - 0 0 0 2016-12-13 Clemens Gruber New
[1/2] pwm: pca9685: fix period change with same duty cycle [1/2] pwm: pca9685: fix period change with same duty cycle - 1 - 0 0 0 2016-12-13 Clemens Gruber New
[v4,1/3] hwmon: (mcp3021) add devicetree support [v4,1/3] hwmon: (mcp3021) add devicetree support - - - 0 0 0 2016-11-09 Clemens Gruber New
[v3,3/3] hwmon: (mcp3021) replace S_IRUGO with 0444 [v3,1/3] hwmon: (mcp3021) add devicetree support - - - 0 0 0 2016-11-09 Clemens Gruber New
[v3,1/3] hwmon: (mcp3021) add devicetree support [v3,1/3] hwmon: (mcp3021) add devicetree support - - - 0 0 0 2016-11-09 Clemens Gruber New
[v2,3/3] hwmon: (mcp3021) replace S_IRUGO with 0444 [v2,1/3] hwmon: (mcp3021) rework for DT support - - - 0 0 0 2016-10-27 Clemens Gruber New
[v2,2/3] hwmon: (mcp3021) add devicetree bindings documentation [v2,1/3] hwmon: (mcp3021) rework for DT support 1 - - 0 0 0 2016-10-27 Clemens Gruber New
[v2,1/3] hwmon: (mcp3021) rework for DT support [v2,1/3] hwmon: (mcp3021) rework for DT support - - - 0 0 0 2016-10-27 Clemens Gruber New
[2/2] hwmon: (mcp3021) add devicetree bindings documentation [1/2] hwmon: (mcp3021) rework for DT support - - - 0 0 0 2016-10-19 Clemens Gruber New
[1/2] hwmon: (mcp3021) rework for DT support [1/2] hwmon: (mcp3021) rework for DT support - - - 0 0 0 2016-10-19 Clemens Gruber New
mcp3021: rework for DT support of reference-voltage mcp3021: rework for DT support of reference-voltage - - - 0 0 0 2016-10-18 Clemens Gruber New
usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase - - - 0 0 0 2016-09-05 Clemens Gruber New
phy: marvell: fix LED configuration via marvell,reg-init phy: marvell: fix LED configuration via marvell,reg-init - 1 - 0 0 0 2016-06-11 Clemens Gruber New
phy: marvell: remove LED config override phy: marvell: remove LED config override - - - 0 0 0 2016-06-10 Clemens Gruber New
[6/6] ASoC: sgtl5000: Remove misleading comment ASoC: sgtl5000: fix use of regulators and internal LDO - 1 - 0 0 0 2016-06-06 Clemens Gruber New
[5/6] ASoC: sgtl5000: Do not disable regulators in SND_SOC_BIAS_OFF ASoC: sgtl5000: fix use of regulators and internal LDO - - 1 0 0 0 2016-06-06 Clemens Gruber New
[4/6] ASoC: sgtl5000: Disable internal PLL early ASoC: sgtl5000: fix use of regulators and internal LDO - - 1 0 0 0 2016-06-06 Clemens Gruber New
[3/6] ASoC: sgtl5000: Initialize CHIP_ANA_POWER to power-on defaults ASoC: sgtl5000: fix use of regulators and internal LDO - - 1 0 0 0 2016-06-06 Clemens Gruber New
[2/6] ASoC: sgtl5000: Write all default registers ASoC: sgtl5000: fix use of regulators and internal LDO - - 1 0 0 0 2016-06-06 Clemens Gruber New
[1/6] ASoC: sgtl5000: Fix regulator support ASoC: sgtl5000: fix use of regulators and internal LDO - - 1 0 0 0 2016-06-06 Clemens Gruber New
ASoC: sgtl5000: only check VDDD-supply, not revision ASoC: sgtl5000: only check VDDD-supply, not revision - - - 0 0 0 2016-06-02 Clemens Gruber New
ASoC: sgtl5000: only check VDDD-supply, not revision ASoC: sgtl5000: only check VDDD-supply, not revision - - - 0 0 0 2016-05-31 Clemens Gruber New
[v3] phy: marvell: Fix and unify reg-init behavior [v3] phy: marvell: Fix and unify reg-init behavior - 2 - 0 0 0 2016-02-15 Clemens Gruber New
[v2] phy: marvell: Fix and unify reg-init behavior [v2] phy: marvell: Fix and unify reg-init behavior - - - 0 0 0 2016-02-15 Clemens Gruber New
phy: marvell: Fix and unify reg-init behavior phy: marvell: Fix and unify reg-init behavior - - - 0 0 0 2016-02-15 Clemens Gruber New
phy: marvell: Fix reg-init bug on 88E1510 phy: marvell: Fix reg-init bug on 88E1510 - - - 0 0 0 2016-02-14 Clemens Gruber New
Revert "net: phy: turn carrier off on phy attach" Revert "net: phy: turn carrier off on phy attach" - - - 0 0 0 2016-02-12 Clemens Gruber New
vmlinux.lds.h: Fix errors in comments and clean up vmlinux.lds.h: Fix errors in comments and clean up - - - 0 0 0 2015-12-09 Clemens Gruber New
kvm: fix maybe-uninitialized compiler warning kvm: fix maybe-uninitialized compiler warning - - - 0 0 0 2015-09-04 Clemens Gruber New
[v4,2/2] pwm-pca9685: Support changing the output frequency pwm-pca9685: Bugfixes and prescaler support - - - 0 0 0 2015-07-23 Clemens Gruber New
[v4,1/2] pwm-pca9685: Fix several driver bugs pwm-pca9685: Bugfixes and prescaler support - - - 0 0 0 2015-07-23 Clemens Gruber New
[v3,2/2] pwm-pca9685: Support changing the output frequency pwm-pca9685: Bugfixes and prescaler support - - - 0 0 0 2015-07-20 Clemens Gruber New
[v3,1/2] pwm-pca9685: Fix several driver bugs pwm-pca9685: Bugfixes and prescaler support - - - 0 0 0 2015-07-20 Clemens Gruber New
[v2,2/2] pwm-pca9685: Support changing the output frequency pwm-pca9685: Bugfixes and prescaler support - - - 0 0 0 2015-07-20 Clemens Gruber New
[v2,1/2] pwm-pca9685: Fix several driver bugs pwm-pca9685: Bugfixes and prescaler support - - - 0 0 0 2015-07-20 Clemens Gruber New
Revert "net: fec: Ensure clocks are enabled while using mdio bus" Revert "net: fec: Ensure clocks are enabled while using mdio bus" - - - 0 0 0 2015-07-16 Clemens Gruber New
[v2] gpio-pca953x: Support NXP PCAL9555A with Agile I/O [v2] gpio-pca953x: Support NXP PCAL9555A with Agile I/O - - - 0 0 0 2015-07-07 Clemens Gruber New