Show patches with: Submitter = Andreas Kemnade       |    State = Action Required       |   113 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[2/2] power: supply: rn5t618: Add input current limit power: supply: rn5t618: Add more properties - - - 0 0 0 2021-05-28 Andreas Kemnade In Next
[1/2] power: supply: rn5t618: Add charger type detection power: supply: rn5t618: Add more properties - - - 0 0 0 2021-05-28 Andreas Kemnade In Next
ARM: dts: imx6sl: add PXP module ARM: dts: imx6sl: add PXP module - - - 0 0 0 2021-05-27 Andreas Kemnade New
[RESEND] mfd: rn5t618: fix IRQ trigger by changing it to level mode [RESEND] mfd: rn5t618: fix IRQ trigger by changing it to level mode - - - 0 0 0 2021-05-15 Andreas Kemnade In Next
mfd: rn5t618: fix IRQ trigger by changing it to level mode mfd: rn5t618: fix IRQ trigger by changing it to level mode - - - 0 0 0 2021-04-05 Andreas Kemnade New
[v3] mfd: ntxec: Support for EC in Tolino Shine 2 HD [v3] mfd: ntxec: Support for EC in Tolino Shine 2 HD - 1 - 0 0 0 2021-03-13 Andreas Kemnade New
[v2] mfd: ntxec: Support for EC in Tolino Shine 2 HD [v2] mfd: ntxec: Support for EC in Tolino Shine 2 HD - 1 - 0 0 0 2021-03-08 Andreas Kemnade New
[-next] mfd: ntxec: Support for EC in Tolino Shine 2 HD [-next] mfd: ntxec: Support for EC in Tolino Shine 2 HD - - - 0 0 0 2021-03-06 Andreas Kemnade New
regulator: core: avoid error messages for deferred probing regulator: core: avoid error messages for deferred probing - - - 0 0 0 2021-01-25 Andreas Kemnade New
ARM: dts: imx6sl-tolino-shine2hd: Add Netronix embedded controller ARM: dts: imx6sl-tolino-shine2hd: Add Netronix embedded controller - 1 - 0 0 0 2021-01-25 Andreas Kemnade New
[3/4] ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux Untitled series #479889 - - - 0 0 0 2021-01-12 Andreas Kemnade New
power: bq27xxx: fix polarity of current_now power: bq27xxx: fix polarity of current_now - - - 0 0 0 2020-12-04 Andreas Kemnade New
ARM: OMAP2+: omap_device: fix idling of devices during probe ARM: OMAP2+: omap_device: fix idling of devices during probe 1 - 1 0 0 0 2020-12-04 Andreas Kemnade New
ARM: imx_v6_v7_defconfig: enable power driver of RN5T618 PMIC family ARM: imx_v6_v7_defconfig: enable power driver of RN5T618 PMIC family - - - 0 0 0 2020-12-02 Andreas Kemnade New
[v2] dt-bindings: mfd: Convert rn5t618 to json-schema [v2] dt-bindings: mfd: Convert rn5t618 to json-schema - 1 - 0 0 0 2020-09-16 Andreas Kemnade New
[v2] omap3: enable off mode automatically [v2] omap3: enable off mode automatically - - - 0 0 0 2020-09-11 Andreas Kemnade New
[2/2] mfd: rn5t618: Add a power supply subdevice power: supply: RN5T618/RC5T619 - - - 0 0 0 2020-08-15 Andreas Kemnade New
[1/2] power: supply: Add support for RN5T618/RC5T619 charger and fuel gauge power: supply: RN5T618/RC5T619 - - - 0 0 0 2020-08-15 Andreas Kemnade New
mfd: rn5t618: Make restart handler atomic safe mfd: rn5t618: Make restart handler atomic safe - - - 0 0 0 2020-07-18 Andreas Kemnade New
[RESEND,v6,7/7] mfd: rn5t618: cleanup i2c_device_id mfd: rn5t618: Add RTC/ADC support - - - 0 0 0 2020-03-13 Andreas Kemnade New
[RESEND,v6,6/7] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619 mfd: rn5t618: Add RTC/ADC support - 1 - 0 0 0 2020-03-13 Andreas Kemnade New
[RESEND,v6,5/7] rtc: rc5t619: add Ricoh RC5T619 RTC driver mfd: rn5t618: Add RTC/ADC support 1 - - 0 0 0 2020-03-13 Andreas Kemnade New
[RESEND,v6,4/7] mfd: rn5t618: add more subdevices mfd: rn5t618: Add RTC/ADC support - - - 0 0 0 2020-03-13 Andreas Kemnade New
[RESEND,v6,3/7] mfd: rn5t618: add RTC related registers mfd: rn5t618: Add RTC/ADC support - - - 0 0 0 2020-03-13 Andreas Kemnade New
[RESEND,v6,2/7] mfd: rn5t618: add IRQ support mfd: rn5t618: Add RTC/ADC support - - - 0 0 0 2020-03-13 Andreas Kemnade New
[RESEND,v6,1/7] dt-bindings: mfd: rn5t618: Document optional property interrupts mfd: rn5t618: Add RTC/ADC support 1 - - 0 0 0 2020-03-13 Andreas Kemnade New
[RESEND,v5,5/5] rtc: rc5t619: add Ricoh RC5T619 RTC driver Add rtc support for rn5t618 mfd 1 - - 0 0 0 2020-02-26 Andreas Kemnade New
[RESEND,v5,4/5] mfd: rn5t618: add more subdevices Add rtc support for rn5t618 mfd - - - 0 0 0 2020-02-26 Andreas Kemnade New
[RESEND,v5,3/5] mfd: rn5t618: add RTC related registers Add rtc support for rn5t618 mfd - - - 0 0 0 2020-02-26 Andreas Kemnade New
[RESEND,v5,2/5] mfd: rn5t618: add IRQ support Add rtc support for rn5t618 mfd - - - 0 0 0 2020-02-26 Andreas Kemnade New
[RESEND,v5,1/5] dt-bindings: mfd: rn5t618: Document optional property interrupts Add rtc support for rn5t618 mfd 1 - - 0 0 0 2020-02-26 Andreas Kemnade New
[RFC] regulator: core: fix handling negative voltages e.g. in EPD PMICs [RFC] regulator: core: fix handling negative voltages e.g. in EPD PMICs - - - 0 0 0 2020-02-23 Andreas Kemnade New
[v5,2/2] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619 mfd: rn5t618: add ADC support - 1 - 0 0 0 2020-02-23 Andreas Kemnade New
[v5,1/2] mfd: rn5t618: add ADC subdevice for RC5T619 mfd: rn5t618: add ADC support - - - 0 0 0 2020-02-23 Andreas Kemnade New
[RFC] Bindings: nvmem: add bindings for JZ4780 efuse [RFC] Bindings: nvmem: add bindings for JZ4780 efuse - - 1 0 0 0 2020-02-20 Andreas Kemnade New
[v5,5/5] rtc: rc5t619: add ricoh rc5t619 RTC driver Add rtc support for rn5t618 mfd 1 - - 0 0 0 2019-12-20 Andreas Kemnade New
[v5,4/5] mfd: rn5t618: add more subdevices Add rtc support for rn5t618 mfd - - - 0 0 0 2019-12-20 Andreas Kemnade New
[v5,3/5] mfd: rn5t618: add RTC related registers Add rtc support for rn5t618 mfd - - - 0 0 0 2019-12-20 Andreas Kemnade New
[v5,2/5] mfd: rn5t618: add IRQ support Add rtc support for rn5t618 mfd - - - 0 0 0 2019-12-20 Andreas Kemnade New
[v5,1/5] dt-bindings: mfd: rn5t618: Document optional property interrupts Add rtc support for rn5t618 mfd 1 - - 0 0 0 2019-12-20 Andreas Kemnade New
[v4,5/5] rtc: rc5t619: add ricoh rc5t619 RTC driver Add rtc support for rn5t618 mfd 1 - - 0 0 0 2019-12-11 Andreas Kemnade New
[v4,4/5] mfd: rn5t618: add more subdevices Add rtc support for rn5t618 mfd - - - 0 0 0 2019-12-11 Andreas Kemnade New
[v4,3/5] mfd: rn5t618: add RTC related registers Add rtc support for rn5t618 mfd - - - 0 0 0 2019-12-11 Andreas Kemnade New
[v4,2/5] mfd: rn5t618: add IRQ support Add rtc support for rn5t618 mfd - - - 0 0 0 2019-12-11 Andreas Kemnade New
[v4,1/5] dt-bindings: mfd: rn5t618: Document optional property interrupts Add rtc support for rn5t618 mfd 1 - - 0 0 0 2019-12-11 Andreas Kemnade New
[v4,3/3] ARM: dts: imx: add devicetree for Kobo Clara HD dts: ARM: add Kobo Clara HD eBook reader - - - 0 0 0 2019-10-26 Andreas Kemnade New
[v4,2/3] ARM: dts: add Netronix E60K02 board common file dts: ARM: add Kobo Clara HD eBook reader - - - 0 0 0 2019-10-26 Andreas Kemnade New
[v4,1/3] dt-bindings: arm: fsl: add compatible string for Kobo Clara HD dts: ARM: add Kobo Clara HD eBook reader 1 - - 0 0 0 2019-10-26 Andreas Kemnade New
drm: panels: fix spi aliases of former omap panels drm: panels: fix spi aliases of former omap panels - - - 0 0 0 2019-10-07 Andreas Kemnade New
regulator: twl: mark vdd1/2 as continuous on twl4030 regulator: twl: mark vdd1/2 as continuous on twl4030 - - - 0 0 0 2019-06-15 Andreas Kemnade New
[v3] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board [v3] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board - - - 0 0 0 2019-04-12 Andreas Kemnade New
[v2] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board [v2] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board - - - 0 0 0 2019-03-01 Andreas Kemnade New
Bluetooth: hci_bcm: fix double-free irq on removal Bluetooth: hci_bcm: fix double-free irq on removal - - - 0 0 0 2019-02-25 Andreas Kemnade New
[v2,2/2] dt-bindings: panel: td028ttec1: add backlight property drm/omap: panel-tpo-td028ttec1: add backlight support - 2 - 0 0 0 2019-02-05 Andreas Kemnade New
[v2,1/2] drm/omap: panel-tpo-td028ttec1: add backlight support drm/omap: panel-tpo-td028ttec1: add backlight support - 1 - 0 0 0 2019-02-05 Andreas Kemnade New
omap3: give off mode enable a more prominent place omap3: give off mode enable a more prominent place - - - 0 0 0 2019-02-02 Andreas Kemnade New
[v4,5/5] dt-bindings: gnss: add lna-supply property gnss: sirf: add support for w2sg0004 + lna - 1 - 0 0 0 2019-01-24 Andreas Kemnade New
[v4,4/5] gnss: sirf: add a separate supply for a lna gnss: sirf: add support for w2sg0004 + lna - - - 0 0 0 2019-01-24 Andreas Kemnade New
[v4,3/5] dt-bindings: gnss: add w2sg0004 compatible string gnss: sirf: add support for w2sg0004 + lna - 2 - 0 0 0 2019-01-24 Andreas Kemnade New
[v4,2/5] gnss: sirf: add support for configurations without wakeup signal gnss: sirf: add support for w2sg0004 + lna - - - 0 0 0 2019-01-24 Andreas Kemnade New
[v4,1/5] gnss: sirf: write data to gnss only when the gnss device is open gnss: sirf: add support for w2sg0004 + lna - - - 0 0 0 2019-01-24 Andreas Kemnade New
[2/2] dt-bindings: panel: td028ttec1: add backlight property Untitled series #380127 - - - 0 0 0 2019-01-19 Andreas Kemnade New
[RFC] media: omap3isp: Fix high idle current [RFC] media: omap3isp: Fix high idle current - - - 0 0 0 2019-01-10 Andreas Kemnade New
[v2,5/5] dt-bindings: gnss: add lna-supply property gnss: sirf: add support for w2sg0004 + lna - 1 - 0 0 0 2018-12-09 Andreas Kemnade New
[v2,4/5] gnss: sirf: add a separate supply for a lna gnss: sirf: add support for w2sg0004 + lna - - - 0 0 0 2018-12-09 Andreas Kemnade New
[v2,3/5] dt-bindings: gnss: add w2sg0004 compatible string gnss: sirf: add support for w2sg0004 + lna - 2 - 0 0 0 2018-12-09 Andreas Kemnade New
[v2,2/5] gnss: sirf: power on logic for devices without wakeup signal gnss: sirf: add support for w2sg0004 + lna - - - 0 0 0 2018-12-09 Andreas Kemnade New
[v2,1/5] gnss: sirf: write data to gnss only when the gnss device is open gnss: sirf: add support for w2sg0004 + lna - - - 0 0 0 2018-12-09 Andreas Kemnade New
[RFC] bluetooth: add uart h4 devices via serdev/devicetree [RFC] bluetooth: add uart h4 devices via serdev/devicetree - - - 0 0 0 2018-11-10 Andreas Kemnade New
[v2,3/3] arm: omap_hwmod disable ick autoidling when a hwmod requires that mach-omap2: handle autoidle denial - - - 0 0 0 2018-11-10 Andreas Kemnade New
[v2,2/3] clk: ti: check clock type before doing autoidle ops mach-omap2: handle autoidle denial - - - 0 0 0 2018-11-10 Andreas Kemnade New
[v2,1/3] clk: ti: add a usecount for autoidle mach-omap2: handle autoidle denial - - - 0 0 0 2018-11-10 Andreas Kemnade New
[2/2] arm: omap_hwmod disable ick autoidling when a hwmod requires that mach-omap2: handle autoidle denial - - - 0 0 0 2018-10-04 Andreas Kemnade New
[1/2] clk: ti: add a usecount for autoidle mach-omap2: handle autoidle denial - - - 0 0 0 2018-10-04 Andreas Kemnade New
ARM: dts: omap3-gta04: add pulldown/up settings for twl4030 gpio ARM: dts: omap3-gta04: add pulldown/up settings for twl4030 gpio - - - 0 0 0 2018-09-24 Andreas Kemnade New
ARM: dts: gta04: add serial console wakeup irq ARM: dts: gta04: add serial console wakeup irq - - - 0 0 0 2018-09-23 Andreas Kemnade New
w1: omap-hdq: fix missing bus unregister at removal w1: omap-hdq: fix missing bus unregister at removal - - - 0 0 0 2018-09-22 Andreas Kemnade New
[v2] phy: phy-twl4030-usb: fix denied runtime access [v2] phy: phy-twl4030-usb: fix denied runtime access - - - 0 0 0 2018-09-22 Andreas Kemnade New
[RESEND] phy: phy-twl4030-usb: fix denied runtime access [RESEND] phy: phy-twl4030-usb: fix denied runtime access - - - 0 0 0 2018-09-17 Andreas Kemnade New
[RESEND] twl4030_charger: fix charging current out-of-bounds [RESEND] twl4030_charger: fix charging current out-of-bounds - - - 0 0 0 2018-09-17 Andreas Kemnade New
mmc: omap_hsmmc: fix wakeirq handling on removal mmc: omap_hsmmc: fix wakeirq handling on removal - - - 0 0 0 2018-09-02 Andreas Kemnade New
phy: phy-twl4030-usb: fix denied runtime access phy: phy-twl4030-usb: fix denied runtime access - - - 0 0 0 2018-08-27 Andreas Kemnade New
pwm: pwm-omap-dmtimer: fix probing problems by returning EPROBE_DEFER pwm: pwm-omap-dmtimer: fix probing problems by returning EPROBE_DEFER - - - 0 0 0 2018-07-28 Andreas Kemnade New
usb: musb: fix enumeration after resume usb: musb: fix enumeration after resume - - 1 0 0 0 2018-01-27 Andreas Kemnade New
net: hso: register netdev later to avoid a race condition net: hso: register netdev later to avoid a race condition - 1 - 0 0 0 2017-04-26 Andreas Kemnade New
net: hso: fix module unloading net: hso: fix module unloading - 1 - 0 0 0 2017-04-24 Andreas Kemnade New
[3/3,media] af9035: add Logilink vg0022a to device id table support for Logilink VG0022a DVB-T2 stick - - - 0 0 0 2017-03-15 Andreas Kemnade New
[2/3,media] af9035: init i2c already in it930x_frontend_attach support for Logilink VG0022a DVB-T2 stick - - - 0 0 0 2017-03-15 Andreas Kemnade New
[1/3,media] si2157: get chip id during probing support for Logilink VG0022a DVB-T2 stick - - - 0 0 0 2017-03-15 Andreas Kemnade New
[v2] musb: omap2430: do not assume balanced enable()/disable() [v2] musb: omap2430: do not assume balanced enable()/disable() 1 - 2 0 0 0 2016-08-03 Andreas Kemnade New
musb: omap2430: do not assume balanced enable()/disable() musb: omap2430: do not assume balanced enable()/disable() - - - 0 0 0 2016-07-29 Andreas Kemnade New
[v3,6/6] libertas: add an cfg80211 interface for powersaving libertas: ieee80211 powersave mode - - - 0 0 0 2016-01-30 Andreas Kemnade New
[v3,5/6] libertas: fix ps-mode related removal problems libertas: ieee80211 powersave mode - - - 0 0 0 2016-01-30 Andreas Kemnade New
[v3,4/6] libertas: go back to ps mode without commands pending libertas: ieee80211 powersave mode - - - 0 0 0 2016-01-30 Andreas Kemnade New
[v3,3/6] libertas: do not confirm sleep if commands are pending libertas: ieee80211 powersave mode - - - 0 0 0 2016-01-30 Andreas Kemnade New
[v3,2/6] libertas: check whether bus can do more than polling libertas: ieee80211 powersave mode - - - 0 0 0 2016-01-30 Andreas Kemnade New
[v3,1/6] libertas: fix pointer bugs for PS_MODE commands libertas: ieee80211 powersave mode - - - 0 0 0 2016-01-30 Andreas Kemnade New
[RFC] wireless:libertas: enable auto deep sleep [RFC] wireless:libertas: enable auto deep sleep - - - 0 0 0 2016-01-20 Andreas Kemnade New
[v2,6/6] wireless:libertas: add an cfg80211 interface for powersaving wireless:libertas: ieee80211 powersave mode - - - 0 0 0 2016-01-20 Andreas Kemnade New
[v2,5/6] wireless:libertas: fix ps-mode related removal problems wireless:libertas: ieee80211 powersave mode - - - 0 0 0 2016-01-20 Andreas Kemnade New
« 1 2 »