Show patches with: Submitter = Kunihiko Hayashi       |    State = Action Required       |   229 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[5/5] pinctrl: uniphier: Fix Pro5 SD pin-mux setting pinctrl: uniphier: Add some improvements and new settings 1 - - 0 0 0 2019-07-09 Kunihiko Hayashi New
[4/5] pinctrl: uniphier: Add Pro5 PCIe pin-mux settings pinctrl: uniphier: Add some improvements and new settings - - - 0 0 0 2019-07-09 Kunihiko Hayashi New
[3/5] pinctrl: uniphier: Add 4th LD20 MPEG2-TS input pin-mux setting pinctrl: uniphier: Add some improvements and new settings 1 - - 0 0 0 2019-07-09 Kunihiko Hayashi New
[2/5] pinctrl: uniphier: Add another audio I/O pin-mux settings for LD20 pinctrl: uniphier: Add some improvements and new settings - - - 0 0 0 2019-07-09 Kunihiko Hayashi New
[1/5] pinctrl: uniphier: Separate modem group from UART ctsrts group pinctrl: uniphier: Add some improvements and new settings - - - 0 0 0 2019-07-09 Kunihiko Hayashi New
[RFC,net,v3] net: phy: Fix the issue that netif always links up after resuming [RFC,net,v3] net: phy: Fix the issue that netif always links up after resuming - - - 0 0 0 2018-12-03 Kunihiko Hayashi New
[RFC,net,v2] net: phy: Fix the issue that netif always links up after resuming [RFC,net,v2] net: phy: Fix the issue that netif always links up after resuming - - - 0 0 0 2018-11-30 Kunihiko Hayashi New
[RFC,net] net: phy: fix the issue that netif always links up after resuming [RFC,net] net: phy: fix the issue that netif always links up after resuming - - - 0 0 0 2018-11-29 Kunihiko Hayashi New
[4/4] reset: uniphier-glue: Add AHCI reset control support in glue layer reset: uniphier: Rename from USB3 reset to glue reset and add AHCI reset support - - - 0 0 0 2018-11-09 Kunihiko Hayashi New
[3/4] dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier: Rename from USB3 reset to glue reset and add AHCI reset support - 1 - 0 0 0 2018-11-09 Kunihiko Hayashi New
[2/4] reset: uniphier-usb3: Rename to reset-uniphier-glue reset: uniphier: Rename from USB3 reset to glue reset and add AHCI reset support - - - 0 0 0 2018-11-09 Kunihiko Hayashi New
[1/4] dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals reset: uniphier: Rename from USB3 reset to glue reset and add AHCI reset support - 1 - 0 0 0 2018-11-09 Kunihiko Hayashi New
[RESEND,v3,2/2] PCI: uniphier: Add UniPhier PCIe host controller support add new UniPhier PCIe host driver - - - 0 0 0 2018-10-16 Kunihiko Hayashi New
[RESEND,v3,1/2] dt-bindings: PCI: Add UniPhier PCIe host controller description add new UniPhier PCIe host driver - 1 - 0 0 0 2018-10-16 Kunihiko Hayashi New
[v3,2/2] PCI: uniphier: Add UniPhier PCIe host controller support add new UniPhier PCIe host driver - - - 0 0 0 2018-10-16 Kunihiko Hayashi New
[v3,1/2] dt-bindings: PCI: Add UniPhier PCIe host controller description add new UniPhier PCIe host driver - 1 - 0 0 0 2018-10-16 Kunihiko Hayashi New
[2/2] phy: socionext: add PCIe PHY driver support add new UniPhier PCIe PHY driver - - - 0 0 0 2018-09-05 Kunihiko Hayashi New
[1/2] dt-bindings: phy: add UniPhier PCIe PHY description add new UniPhier PCIe PHY driver - - - 0 0 0 2018-09-05 Kunihiko Hayashi New
[v2,3/3] ata: ahci_platform: enable to get and control reset ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[v2,2/3] ata: libahci_platform: add reset control support ata: ahci-platform: add reset control support except for existing drivers 1 - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[v2,1/3] ata: add an extra argument to ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[14/14] ata: ahci_xgene: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[13/14] ata: ahci_tegra: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[12/14] ata: ahci_sunxi: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[11/14] ata: ahci_st: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[10/14] ata: ahci_seattle: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[09/14] ata: ahci_qoriq: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[08/14] ata: ahci_mvebu: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[07/14] ata: ahci_brcm: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[06/14] ata: ahci_imx: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[05/14] ata: ahci_dm816: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[04/14] ata: ahci_da850: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[03/14] ata: ahci_ceva: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[02/14] ata: ahci_brcm: add second argument of ahci_platform_get_resources() ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[01/14] ata: ahci-platform: add reset control support and the flag to specify using reset ata: ahci-platform: add reset control support except for existing drivers - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[v3,4/4] phy: socionext: add USB2 PHY driver for UniPhier SoC phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[v3,3/4] dt-bindings: phy: add DT bindings for UniPhier USB2 PHY driver phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[v3,2/4] phy: socionext: add USB3 PHY driver for UniPhier SoC phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[v3,1/4] dt-bindings: phy: add DT bindings for UniPhier USB3 PHY driver phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-08-22 Kunihiko Hayashi New
[v2,4/4] phy: socionext: add USB2 PHY driver for UniPhier SoC phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-08-03 Kunihiko Hayashi New
[v2,3/4] dt-bindings: phy: add DT bindings for UniPhier USB2 PHY driver phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-08-03 Kunihiko Hayashi New
[v2,2/4] phy: socionext: add USB3 PHY driver for UniPhier SoC phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-08-03 Kunihiko Hayashi New
[v2,1/4] dt-bindings: phy: add DT bindings for UniPhier USB3 PHY driver phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-08-03 Kunihiko Hayashi New
[v3,2/2] regulator: uniphier: add regulator driver for UniPhier SoC regulator: add new UniPhier regulator support - - - 0 0 0 2018-07-11 Kunihiko Hayashi New
[v3,1/2] dt-bindings: regulator: add DT bindings for UniPhier regulator regulator: add new UniPhier regulator support - - - 0 0 0 2018-07-11 Kunihiko Hayashi New
[v2,2/2] regulator: uniphier: add regulator driver for UniPhier SoC regulator: add new UniPhier regulator support - - - 0 0 0 2018-07-10 Kunihiko Hayashi New
[v2,1/2] dt-bindings: regulator: add DT bindings for UniPhier regulator regulator: add new UniPhier regulator support - - - 0 0 0 2018-07-10 Kunihiko Hayashi New
[v2,2/2] reset: uniphier: add USB3 core reset control reset: uniphier: add USB3 core reset support - - - 0 0 0 2018-07-10 Kunihiko Hayashi New
[v2,1/2] dt-bindings: reset: uniphier: add USB3 core reset support reset: uniphier: add USB3 core reset support - 1 - 0 0 0 2018-07-10 Kunihiko Hayashi New
reset: simple: export reset_simple_ops to be referred from modules reset: simple: export reset_simple_ops to be referred from modules - - - 0 0 0 2018-07-04 Kunihiko Hayashi New
[4/4] phy: socionext: add USB2 PHY driver for UniPhier SoC phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-06-29 Kunihiko Hayashi New
[3/4] dt-bindings: phy: add DT bindings for UniPhier USB2 PHY driver phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-06-29 Kunihiko Hayashi New
[2/4] phy: socionext: add USB3 PHY driver for UniPhier SoC phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-06-29 Kunihiko Hayashi New
[1/4] dt-bindings: phy: add DT bindings for UniPhier USB3 PHY driver phy: socionext: add new UniPhier USB PHY driver support - - - 0 0 0 2018-06-29 Kunihiko Hayashi New
[2/2] regulator: uniphier: add regulator driver for UniPhier SoC regulator: add new UniPhier regulator support - - - 0 0 0 2018-06-29 Kunihiko Hayashi New
[1/2] dt-bindings: regulator: add DT bindings for UniPhier regulator regulator: add new UniPhier regulator support - - - 0 0 0 2018-06-29 Kunihiko Hayashi New
[2/2] reset: uniphier: add USB3 controller reset control reset: uniphier: add USB3 controller reset support - - - 0 0 0 2018-06-29 Kunihiko Hayashi New
[1/2] dt-bindings: reset: uniphier: add USB3 controller reset support reset: uniphier: add USB3 controller reset support - - - 0 0 0 2018-06-29 Kunihiko Hayashi New
[2/2] reset: uniphier: add SATA reset control support and change SATA-PHY ID reset: uniphier: add support for PCIe and SATA - - - 0 0 0 2018-03-30 Kunihiko Hayashi New
[1/2] reset: uniphier: add PCIe reset control support reset: uniphier: add support for PCIe and SATA - - - 0 0 0 2018-03-30 Kunihiko Hayashi New
[3/3] clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add support for PCIe, SATA and ethernet - - - 0 0 0 2018-03-30 Kunihiko Hayashi New
[2/3] clk: uniphier: add SATA clock control support clk: uniphier: add support for PCIe, SATA and ethernet - - - 0 0 0 2018-03-30 Kunihiko Hayashi New
[1/3] clk: uniphier: add PCIe clock control support clk: uniphier: add support for PCIe, SATA and ethernet - - - 0 0 0 2018-03-30 Kunihiko Hayashi New
[2/2] thermal: uniphier: add UniPhier PXs3 support add thermal monitor support for UniPhier PXs3 SoC - - - 0 0 0 2018-03-30 Kunihiko Hayashi New
[1/2] dt-bindings: thermal: uniphier: add a compatible string for PXs3 add thermal monitor support for UniPhier PXs3 SoC - - - 0 0 0 2018-03-30 Kunihiko Hayashi New
[RESEND,v2] ata: ahci-platform: add reset control support [RESEND,v2] ata: ahci-platform: add reset control support - 2 - 0 0 0 2018-03-27 Kunihiko Hayashi New
[v2] ata: ahci-platform: add reset control support [v2] ata: ahci-platform: add reset control support - 2 - 0 0 0 2018-03-27 Kunihiko Hayashi New
[2/2] net: ethernet: ave: add UniPhier PXs3 support net: ethernet: ave: add UniPhier PXs3 support - - - 0 0 0 2018-03-23 Kunihiko Hayashi New
[1/2] dt-bindings: net: ave: add PXs3 support net: ethernet: ave: add UniPhier PXs3 support - - - 0 0 0 2018-03-23 Kunihiko Hayashi New
reset: uniphier: add ethernet reset control support for PXs3 reset: uniphier: add ethernet reset control support for PXs3 1 - - 0 0 0 2018-03-23 Kunihiko Hayashi New
clk: uniphier: add ethernet clock control support for PXs3 clk: uniphier: add ethernet clock control support for PXs3 1 - - 0 0 0 2018-03-23 Kunihiko Hayashi New
ata: ahci-platform: add reset control support ata: ahci-platform: add reset control support - 2 - 0 0 0 2018-03-23 Kunihiko Hayashi New
pinctrl: uniphier: add UART hardware flow control pin-mux settings pinctrl: uniphier: add UART hardware flow control pin-mux settings 1 - - 0 0 0 2018-03-19 Kunihiko Hayashi New
[4/4] arm64: dts: uniphier: add dwc3 usb node for LD20 usb: dwc3: add UniPhier dwc3 glue layer support - - - 0 0 0 2018-01-23 Kunihiko Hayashi New
[3/4] ARM: dts: uniphier: add dwc3 usb node for PXs2 usb: dwc3: add UniPhier dwc3 glue layer support - - - 0 0 0 2018-01-23 Kunihiko Hayashi New
[2/4] usb: dwc3: add dwc3 glue layer for UniPhier SoCs usb: dwc3: add UniPhier dwc3 glue layer support - - - 0 0 0 2018-01-23 Kunihiko Hayashi New
[1/4] dt-bindings: dwc3: add binding documentation for UniPhier dwc3 glue driver usb: dwc3: add UniPhier dwc3 glue layer support - - - 0 0 0 2018-01-23 Kunihiko Hayashi New
fbdev: simplefb: add support for 'memory-region' property on DT node fbdev: simplefb: add support for 'memory-region' property on DT node 1 - - 0 0 0 2018-01-23 Kunihiko Hayashi New
[net-next,v9,2/2] net: ethernet: socionext: add AVE ethernet driver add UniPhier AVE ethernet support - 1 - 0 0 0 2017-12-28 Kunihiko Hayashi New
[net-next,v9,1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE add UniPhier AVE ethernet support 1 1 - 0 0 0 2017-12-28 Kunihiko Hayashi New
[net-next,v8,2/2] net: ethernet: socionext: add AVE ethernet driver add UniPhier AVE ethernet support - 1 - 0 0 0 2017-12-25 Kunihiko Hayashi New
[net-next,v8,1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE add UniPhier AVE ethernet support 1 1 - 0 0 0 2017-12-25 Kunihiko Hayashi New
[net-next,v7,2/2] net: ethernet: socionext: add AVE ethernet driver add UniPhier AVE ethernet support - 1 - 0 0 0 2017-12-21 Kunihiko Hayashi New
[net-next,v7,1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE add UniPhier AVE ethernet support 1 - - 0 0 0 2017-12-21 Kunihiko Hayashi New
[net-next,v6,2/2] net: ethernet: socionext: add AVE ethernet driver add UniPhier AVE ethernet support - 1 - 0 0 0 2017-12-14 Kunihiko Hayashi New
[net-next,v6,1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE add UniPhier AVE ethernet support 1 - - 0 0 0 2017-12-14 Kunihiko Hayashi New
[net-next,v5,2/2] net: ethernet: socionext: add AVE ethernet driver add UniPhier AVE ethernet support - 1 - 0 0 0 2017-12-11 Kunihiko Hayashi New
[net-next,v5,1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE add UniPhier AVE ethernet support 1 - - 0 0 0 2017-12-11 Kunihiko Hayashi New
[net-next,v4,2/2] net: ethernet: socionext: add AVE ethernet driver add UniPhier AVE ethernet support - 1 - 0 0 0 2017-12-01 Kunihiko Hayashi New
[net-next,v4,1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE add UniPhier AVE ethernet support 1 - - 0 0 0 2017-12-01 Kunihiko Hayashi New
nvmem: uniphier: change access unit from 32bit to 8bit nvmem: uniphier: change access unit from 32bit to 8bit - 1 1 0 0 0 2017-11-22 Kunihiko Hayashi New
[net-next,v3,2/2] net: ethernet: socionext: add AVE ethernet driver add UniPhier AVE ethernet support - - - 0 0 0 2017-10-25 Kunihiko Hayashi New
[net-next,v3,1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE add UniPhier AVE ethernet support 1 - - 0 0 0 2017-10-25 Kunihiko Hayashi New
[net-next,v2,2/2] net: ethernet: socionext: add AVE ethernet driver add UniPhier AVE ethernet support - - - 0 0 0 2017-10-13 Kunihiko Hayashi New
[net-next,v2,1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE add UniPhier AVE ethernet support - - - 0 0 0 2017-10-13 Kunihiko Hayashi New
[net-next,3/3] net: phy: realtek: add RTL8201F phy-id and functions add UniPhier AVE ethernet support - 2 - 0 0 0 2017-09-08 Kunihiko Hayashi New
[net-next,2/3] net: ethernet: socionext: add AVE ethernet driver add UniPhier AVE ethernet support - - - 0 0 0 2017-09-08 Kunihiko Hayashi New
[net-next,1/3] dt-bindings: net: add DT bindings for Socionext UniPhier AVE add UniPhier AVE ethernet support - - - 0 0 0 2017-09-08 Kunihiko Hayashi New
[RESEND,v4,2/2] arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20 add thermal nodes for UniPhier SoCs - - - 0 0 0 2017-09-04 Kunihiko Hayashi New
[RESEND,v4,1/2] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 add thermal nodes for UniPhier SoCs - - - 0 0 0 2017-09-04 Kunihiko Hayashi New
« 1 2 3 »