Show patches with: Submitter = Daniel Baluta       |    State = Action Required       |    Archived = No       |   63 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,3/3] ASoC: fsl_sai: Fix TCSR.TE/RCSR.RE in synchronous mode Several SAI fixes - - - 0 0 0 2019-09-13 Daniel Baluta New
[v2,2/3] ASoC: fsl_sai: Fix xMR setting in synchronous mode Several SAI fixes - - - 0 0 0 2019-09-13 Daniel Baluta New
[v2,1/3] ASoC: fsl_sai: Fix noise when using EDMA Several SAI fixes 1 - - 0 0 0 2019-09-13 Daniel Baluta New
ASoC: fsl_sai: Set SAI Channel Mode to Output Mode ASoC: fsl_sai: Set SAI Channel Mode to Output Mode - - - 0 0 0 2019-08-30 Daniel Baluta New
ASoC: fsl_sai: Fix noise when using EDMA ASoC: fsl_sai: Fix noise when using EDMA - - - 0 0 0 2019-08-30 Daniel Baluta New
[RFC] ASoC: fsl_sai: Enable data lines based on input channels [RFC] ASoC: fsl_sai: Enable data lines based on input channels - - - 0 0 0 2019-08-11 Daniel Baluta New
ASoC: fsl_sai: Handle slave mode per TX/RX direction ASoC: fsl_sai: Handle slave mode per TX/RX direction - - - 0 0 0 2019-08-11 Daniel Baluta New
[v3,5/5] dt-bindings: dsp: fsl: Add DSP core binding support Add DSP node for i.MX8QXP board to be used by DSP SOF driver - 1 - 0 0 0 2019-08-07 Daniel Baluta New
[v3,4/5] arm64: dts: imx8qxp: Add DSP DT node Add DSP node for i.MX8QXP board to be used by DSP SOF driver - - - 0 0 0 2019-08-07 Daniel Baluta New
[v3,3/5] ASoC: SOF: topology: Add dummy support for i.MX8 DAIs Add DSP node for i.MX8QXP board to be used by DSP SOF driver - - - 0 0 0 2019-08-07 Daniel Baluta New
[v3,2/5] ASoC: SOF: imx: Add i.MX8 HW support Add DSP node for i.MX8QXP board to be used by DSP SOF driver - - - 0 0 0 2019-08-07 Daniel Baluta New
[v3,1/5] ASoC: SOF: Add OF DSP device support Add DSP node for i.MX8QXP board to be used by DSP SOF driver - - - 0 0 0 2019-08-07 Daniel Baluta New
mailbox: imx: Fix Tx doorbell shutdown path mailbox: imx: Fix Tx doorbell shutdown path - - - 0 0 0 2019-07-31 Daniel Baluta New
[v2,7/7] ASoC: dt-bindings: Introduce compatible strings for 7ULP and 8MQ Add support for new SAI IP version - - - 0 0 0 2019-07-28 Daniel Baluta New
[v2,6/7] ASoC: fsl_sai: Add support for imx7ulp/imx8mq Add support for new SAI IP version 1 - - 0 0 0 2019-07-28 Daniel Baluta New
[v2,5/7] ASoC: fsl_sai: Add support for SAI new version Add support for new SAI IP version - - - 0 0 0 2019-07-28 Daniel Baluta New
[v2,4/7] ASoC: dt-bindings: Document dl-mask property Add support for new SAI IP version - - - 0 0 0 2019-07-28 Daniel Baluta New
[v2,3/7] ASoC: fsl_sai: Add support to enable multiple data lines Add support for new SAI IP version - - - 0 0 0 2019-07-28 Daniel Baluta New
[v2,2/7] ASoC: fsl_sai: Update Tx/Rx channel enable mask Add support for new SAI IP version - - - 0 0 0 2019-07-28 Daniel Baluta New
[v2,1/7] ASoC: fsl_sai: Add registers definition for multiple datalines Add support for new SAI IP version - - - 0 0 0 2019-07-28 Daniel Baluta New
[v4] arm64: dts: imx8mq: Init rates and parents configs for clocks [v4] arm64: dts: imx8mq: Init rates and parents configs for clocks - - 2 0 0 0 2019-07-28 Daniel Baluta New
[v3] arm64: dts: imx8mq: Init rates and parents configs for clocks [v3] arm64: dts: imx8mq: Init rates and parents configs for clocks - - 2 0 0 0 2019-07-28 Daniel Baluta New
[v2,5/5] dt-bindings: dsp: fsl: Add DSP core binding support Add DSP node for i.MX8QXP board to be used by DSP SOF driver - 1 - 0 0 0 2019-07-23 Daniel Baluta New
[v2,4/5] arm64: dts: imx8qxp: Add DSP DT node Add DSP node for i.MX8QXP board to be used by DSP SOF driver - - - 0 0 0 2019-07-23 Daniel Baluta New
[v2,3/5] ASoC: SOF: Add DT DSP device support Add DSP node for i.MX8QXP board to be used by DSP SOF driver - - - 0 0 0 2019-07-23 Daniel Baluta New
[v2,2/5] ASoC: SOF: topology: Add dummy support for i.MX8 DAIs Add DSP node for i.MX8QXP board to be used by DSP SOF driver - - - 0 0 0 2019-07-23 Daniel Baluta New
[v2,1/5] ASoC: SOF: imx: Add i.MX8 HW support Add DSP node for i.MX8QXP board to be used by DSP SOF driver - - - 0 0 0 2019-07-23 Daniel Baluta New
[10/10] ASoC: fsl_sai: Add support for imx7ulp/imx8mq Add support for new SAI IP version - - - 0 0 0 2019-07-22 Daniel Baluta New
[09/10] ASoC: fsl_sai: Add support for SAI new version Add support for new SAI IP version - - - 0 0 0 2019-07-22 Daniel Baluta New
[08/10] ASoC: dt-bindings: Document fcomb_mode property Add support for new SAI IP version - - - 0 0 0 2019-07-22 Daniel Baluta New
[07/10] ASoC: fsl_sai: Add support for FIFO combine mode Add support for new SAI IP version - - - 0 0 0 2019-07-22 Daniel Baluta New
[06/10] ASoC: dt-bindings: Document dl_mask property Add support for new SAI IP version - - - 0 0 0 2019-07-22 Daniel Baluta New
[05/10] ASoC: fsl_sai: Add support to enable multiple data lines Add support for new SAI IP version - - - 0 0 0 2019-07-22 Daniel Baluta New
[04/10] ASoC: fsl_sai: Update Tx/Rx channel enable mask Add support for new SAI IP version - - - 0 0 0 2019-07-22 Daniel Baluta New
[03/10] ASoC: fsl_sai: Add registers definition for multiple datalines Add support for new SAI IP version - - - 0 0 0 2019-07-22 Daniel Baluta New
[02/10] ASoC: fsl_sai: derive TX FIFO watermark from FIFO depth Add support for new SAI IP version - - - 0 0 0 2019-07-22 Daniel Baluta New
[01/10] ASoC: fsl_sai: add of_match data Add support for new SAI IP version - - - 0 0 0 2019-07-22 Daniel Baluta New
[3/3] dt-bindings: dsp: fsl: Add DSP core binding support Add DSP node on i.MX8QXP board - - - 0 0 0 2019-07-18 Daniel Baluta New
[2/3] arm64: dts: imx8qxp: Add DSP DT node Add DSP node on i.MX8QXP board - - - 0 0 0 2019-07-18 Daniel Baluta New
[1/3] clk: imx8: Add DSP related clocks Add DSP node on i.MX8QXP board - 1 - 0 0 0 2019-07-18 Daniel Baluta New
firmware: imx: Add DSP IPC protocol interface firmware: imx: Add DSP IPC protocol interface - - - 0 0 0 2019-07-18 Daniel Baluta New
[3/3] firmware: imx: scu-pd: Add IRQSTR_DSP PD range Add power domain range for MU side b / IRQSTR_DSP - 1 - 0 0 0 2019-07-03 Daniel Baluta New
[2/3] firmware: imx: scu-pd: Add mu_b side PD range Add power domain range for MU side b / IRQSTR_DSP - - - 0 0 0 2019-07-03 Daniel Baluta New
[1/3] firmware: imx: scu-pid: Rename mu PD range to mu_a Add power domain range for MU side b / IRQSTR_DSP - 1 - 0 0 0 2019-07-03 Daniel Baluta New
[v2,2/2] dt-bindings: dsp: fsl: Add DSP IPC binding support Add support for DSP IPC protocol driver - - - 0 0 0 2019-06-27 Daniel Baluta New
[v2,1/2] firmware: imx: Add DSP IPC protocol interface Add support for DSP IPC protocol driver - 1 - 0 0 0 2019-06-27 Daniel Baluta New
[RFC,2/2] imx: mailbox: Introduce TX doorbell with ACK Introduce Tx doorbell with ACK - - - 0 0 0 2019-06-10 Daniel Baluta New
[RFC,1/2] mailbox: imx: Clear GIEn bit at shutdown Introduce Tx doorbell with ACK - 1 - 0 0 0 2019-06-10 Daniel Baluta New
[v4,2/2] arm64: dts: imx8mm-evk: Enable audio codec wm8524 Enable wm8524 codec on i.MX8MM EVK - 1 - 0 0 0 2019-06-04 Daniel Baluta New
[v4,1/2] arm64: dts: imx8mm: Add SAI nodes Enable wm8524 codec on i.MX8MM EVK - 1 - 0 0 0 2019-06-04 Daniel Baluta New
[3/3] ASoC: fsl_sai: Read SAI clock source 0 from DT Add mclk0 clock source for SAI - - - 0 0 0 2019-05-28 Daniel Baluta New
[2/3] dt-bindings: sound: Clarify the usage of clocks in SAI Add mclk0 clock source for SAI - 1 - 0 0 0 2019-05-28 Daniel Baluta New
[1/3] ARM: dts: imx: Add mclk0 clock for SAI Add mclk0 clock source for SAI - - - 0 0 0 2019-05-28 Daniel Baluta New
[v3,3/3] ASoC: fsl_sai: Move clock operation to PM runtime Add runtime PM for SAI digital audio interface - - - 0 0 0 2019-04-22 Daniel Baluta New
[v3,2/3] ASoC: fsl_sai: Add support for runtime pm Add runtime PM for SAI digital audio interface - - - 0 0 0 2019-04-22 Daniel Baluta New
[v3,1/3] ASoC: fsl_sai: Update is_slave_mode with correct value Add runtime PM for SAI digital audio interface 1 - - 0 0 0 2019-04-22 Daniel Baluta New
ASoC: fsl: sai: Fix clock source for mclk0 ASoC: fsl: sai: Fix clock source for mclk0 - - - 0 0 0 2019-04-20 Daniel Baluta New
ARM: dts: imx: Add mclk0 clock for SAI ARM: dts: imx: Add mclk0 clock for SAI - - - 0 0 0 2019-04-20 Daniel Baluta New
arm64: dts: imx8qxp: Add lpuart1/lpuart2/lpuart3 nodes arm64: dts: imx8qxp: Add lpuart1/lpuart2/lpuart3 nodes - 1 - 0 0 0 2019-03-30 Daniel Baluta New
[v2,2/2] arm64: dts: imx8qxp: Add EDMA0/EDMA1 nodes Add EDMA0/EDMA1 nodes on i.MX8QXP - - - 0 0 0 2019-03-27 Daniel Baluta New
[v2,1/2] bindings: fsl-edma: Document fsl,imx8qxp-edma compatbile string Add EDMA0/EDMA1 nodes on i.MX8QXP - - - 0 0 0 2019-03-27 Daniel Baluta New
[2/2] arm64: dts: imx8qxp: Add EDMA0/EDMA1 nodes Add EDMA0/EDMA1 nodes - - - 0 0 0 2019-03-26 Daniel Baluta New
[1/2] bindings: fsl-edma: Document fsl,imx8qm-edma compatbile string Add EDMA0/EDMA1 nodes - - - 0 0 0 2019-03-26 Daniel Baluta New