Show patches with: Submitter = Claudiu Beznea       |    State = Action Required       |    Archived = No       |   59 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
clocksource/drivers/timer-microchip-pit64b: set rate for gck clocksource/drivers/timer-microchip-pit64b: set rate for gck - - - 0 0 0 2020-03-16 Claudiu Beznea In Next
[14/15] power: reset: at91-reset: get rid of at91_reset_data rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[15/15] power: reset: at91-reset: handle nrst async for sam9x60 rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[13/15] power: reset: at91-reset: keep only one reset function rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[12/15] power: reset: at91-reset: make at91sam9g45_restart() generic rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[11/15] power: reset: at91-reset: introduce ramc_lpr to struct at91_reset rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[10/15] power: reset: at91-reset: use r4 as tmp argument rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[09/15] power: reset: at91-reset: introduce args member in at91_reset_data rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[07/15] power: reset: at91-reset: devm_kzalloc() for at91_reset data structure rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[06/15] power: reset: at91-reset: pass rstc base address to at91_reset_status() rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[08/15] power: reset: at91-reset: introduce struct at91_reset_data rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[04/15] power: reset: at91-reset: add notifier block to struct at91_reset rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[05/15] power: reset: at91-reset: convert reset in pointer to struct at91_reset rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[02/15] power: reset: at91-reset: add ramc_base[] to struct at91_reset rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[03/15] power: reset: at91-reset: add sclk to struct at91_reset rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[01/15] power: reset: at91-reset: introduce struct at91_reset rework at91-reset driver - - - 0 0 0 2020-01-21 Claudiu Beznea In Next
[8/8] ARM: at91: pm: add quirk for sam9x60's ulp1 PM fixes and improvements for SAM9X60 - - - 0 0 0 2020-01-20 Claudiu Beznea New
[7/8] ARM: at91: pm: add plla disable/enable support for sam9x60 PM fixes and improvements for SAM9X60 - - - 0 0 0 2020-01-20 Claudiu Beznea New
[6/8] clk: at91: move sam9x60's PLL register offsets to PMC header PM fixes and improvements for SAM9X60 1 - - 0 0 0 2020-01-20 Claudiu Beznea New
[5/8] ARM: at91: pm: s/sfr/sfrbu in pm_suspend.S PM fixes and improvements for SAM9X60 - - - 0 0 0 2020-01-20 Claudiu Beznea New
[4/8] ARM: at91: pm: add pmc_version member to at91_pm_data PM fixes and improvements for SAM9X60 1 - - 0 0 0 2020-01-20 Claudiu Beznea New
[3/8] ARM: at91: pm: add macros for plla disable/enable PM fixes and improvements for SAM9X60 - - - 0 0 0 2020-01-20 Claudiu Beznea New
[2/8] Revert "ARM: at91: pm: do not disable/enable PLLA for ULP modes" PM fixes and improvements for SAM9X60 - - - 0 0 0 2020-01-20 Claudiu Beznea New
[1/8] ARM: at91: pm: use proper master clock register offset PM fixes and improvements for SAM9X60 - - - 0 0 0 2020-01-20 Claudiu Beznea New
[4/4] clk: at91: usb: introduce num_parents in driver's structure clock fixes for at91 1 - - 0 0 0 2020-01-17 Claudiu Beznea In Next
[3/4] clk: at91: usb: use proper usbs_mask clock fixes for at91 1 - - 0 0 0 2020-01-17 Claudiu Beznea In Next
[2/4] clk: at91: sam9x60: fix usb clock parents clock fixes for at91 1 - - 0 0 0 2020-01-17 Claudiu Beznea In Next
[1/4] clk: at91: usb: continue if clk_hw_round_rate() return zero clock fixes for at91 - - - 0 0 0 2020-01-17 Claudiu Beznea In Next
[v3,6/6] Revert "drm: atmel-hlcdc: enable sys_clk during initalization." fixes for atmel-hlcdc - - - 0 0 0 2019-12-18 Claudiu Beznea New
[v3,5/6] drm: atmel-hlcdc: prefer a lower pixel-clock than requested fixes for atmel-hlcdc - - 1 0 0 0 2019-12-18 Claudiu Beznea New
[v3,4/6] mfd: atmel-hlcdc: return in case of error fixes for atmel-hlcdc - - - 0 0 0 2019-12-18 Claudiu Beznea New
[v3,3/6] mfd: atmel-hlcdc: add struct device member to struct atmel_hlcdc_regmap fixes for atmel-hlcdc - - - 0 0 0 2019-12-18 Claudiu Beznea New
[v3,2/6] drm: atmel-hlcdc: enable clock before configuring timing engine fixes for atmel-hlcdc - - - 0 0 0 2019-12-18 Claudiu Beznea New
[v3,1/6] drm: atmel-hlcdc: use double rate for pixel clock only if supported fixes for atmel-hlcdc - - - 0 0 0 2019-12-18 Claudiu Beznea New
[v4,2/2] clocksource/drivers/timer-microchip-pit64b: add Microchip PIT64B support add Microchip PIT64B timer - - - 0 0 0 2019-12-13 Claudiu Beznea New
[v4,1/2] dt-bindings: arm: atmel: add bindings for PIT64B add Microchip PIT64B timer - 1 - 0 0 0 2019-12-13 Claudiu Beznea New
[5/5] Revert "drm: atmel-hlcdc: enable sys_clk during initalization." fixes for atmel-hlcdc - - - 0 0 0 2019-12-10 Claudiu Beznea New
[4/5] Revert "drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested" fixes for atmel-hlcdc - - - 0 0 0 2019-12-10 Claudiu Beznea New
[3/5] mfd: atmel-hlcdc: return in case of error fixes for atmel-hlcdc - - - 0 0 0 2019-12-10 Claudiu Beznea New
[2/5] drm: atmel-hlcdc: enable clock before configuring timing engine fixes for atmel-hlcdc - - - 0 0 0 2019-12-10 Claudiu Beznea New
[1/5] drm: atmel-hlcdc: use double rate for pixel clock only if supported fixes for atmel-hlcdc - - - 0 0 0 2019-12-10 Claudiu Beznea New
[v3,2/2] clocksource/drivers/timer-microchip-pit64b: add Microchip PIT64B support add Microchip PIT64B timer - - - 0 0 0 2019-12-04 Claudiu Beznea New
[v3,1/2] dt-bindings: arm: atmel: add bindings for PIT64B add Microchip PIT64B timer - 1 - 0 0 0 2019-12-04 Claudiu Beznea New
[13/13] ARM: at91/defconfig: enable CLASSD add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[12/13] ARM: at91/defconfig: enable ATMEL_QUADSPI add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[11/13] ARM: at91/defconfig: enable AT91_SAMA5D2_ADC add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[10/13] ARM: at91/defconfig: Add driver for Audio PROTO board add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[09/13] ARM: at91/defconfig: Add I2S Multi-channel driver add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[08/13] ARM: at91/defconfig: enable XDMAC add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[07/13] ARM: at91/defconfig: enable flexcom add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[06/13] ARM: at91/defconfig: enable SAMA5D2's SHDWC add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[05/13] ARM: at91/defconfig: enable atmel maxtouch add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[04/13] ARM: at91/defconfig: add config option for SAM9X60 SoC add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[03/13] ARM: at91/defconfig: use savedefconfig add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[02/13] ARM: at91: Kconfig: add config flag for SAM9X60 SoC add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[01/13] ARM: at91: Kconfig: add sam9x60 pll config flag add defconfig support for SAM9X60 - - - 0 0 0 2019-11-13 Claudiu Beznea New
[v2,2/2] clocksource/drivers/timer-microchip-pit64b: add Microchip PIT64B support add Microchip PIT64B timer - - - 0 0 0 2019-11-04 Claudiu Beznea New
[v2,1/2] dt-bindings: arm: atmel: add bindings for PIT64B add Microchip PIT64B timer - 1 - 0 0 0 2019-11-04 Claudiu Beznea New
clk: at91: add compatible for sam9x60 clk: at91: add compatible for sam9x60 - - - 0 0 0 2019-10-08 Claudiu Beznea New