Show patches with: Submitter = Oleksij Rempel       |    State = Action Required       |    Archived = No       |   94 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[net-next,v1] net: phy: at803x: add mdix configuration support for AR9331 and AR8035 [net-next,v1] net: phy: at803x: add mdix configuration support for AR9331 and AR8035 - 1 - 0 0 0 2020-07-19 Oleksij Rempel In Next
[net-next,v1,5/5] net: phy: micrel: ksz886x/ksz8081: add cabletest support add cable test support for ksz8081 and ksz8873 - 1 - 0 0 0 2020-07-10 Oleksij Rempel New
[net-next,v1,4/5] net: phy: micrel: ksz8081 add MDI-X support add cable test support for ksz8081 and ksz8873 - 1 - 0 0 0 2020-07-10 Oleksij Rempel New
[net-next,v1,3/5] net: phy: micrel: ksz886x add MDI-X support add cable test support for ksz8081 and ksz8873 - 1 - 0 0 0 2020-07-10 Oleksij Rempel New
[net-next,v1,2/5] net: phy: micrel: apply resume errata workaround for ksz8873 and ksz8863 add cable test support for ksz8081 and ksz8873 - - - 0 0 0 2020-07-10 Oleksij Rempel New
[net-next,v1,1/5] net: phy: micrel: use consistent indention after define add cable test support for ksz8081 and ksz8873 - 1 - 0 0 0 2020-07-10 Oleksij Rempel New
[v9,5/5] ARM: dts: add Protonic RVT board mainline Protonic boards - 1 - 0 0 0 2020-07-01 Oleksij Rempel New
[v9,4/5] ARM: dts: add Protonic VT7 board mainline Protonic boards - 1 - 0 0 0 2020-07-01 Oleksij Rempel New
[v9,3/5] ARM: dts: add Protonic WD2 board mainline Protonic boards - 1 - 0 0 0 2020-07-01 Oleksij Rempel New
[v9,2/5] ARM: dts: add Protonic PRTI6Q board mainline Protonic boards - 1 - 0 0 0 2020-07-01 Oleksij Rempel New
[v9,1/5] dt-bindings: arm: fsl: add different Protonic boards mainline Protonic boards - 1 - 0 0 0 2020-07-01 Oleksij Rempel New
[v4,3/3] netlink: add LINKSTATE SQI support Add support for SQI and master-slave - 2 - 0 0 0 2020-06-10 Oleksij Rempel New
[v4,2/3] netlink: add master/slave configuration support Add support for SQI and master-slave - 1 - 0 0 0 2020-06-10 Oleksij Rempel New
[v4,1/3] update UAPI header copies Add support for SQI and master-slave - - - 0 0 0 2020-06-10 Oleksij Rempel New
[v3,3/3] netlink: add LINKSTATE SQI support Add support for SQI and master-slave - 2 - 0 0 0 2020-06-09 Oleksij Rempel New
[v3,2/3] netlink: add master/slave configuration support Add support for SQI and master-slave - 1 - 0 0 0 2020-06-09 Oleksij Rempel New
[v3,1/3] update UAPI header copies Add support for SQI and master-slave - - - 0 0 0 2020-06-09 Oleksij Rempel New
[v2,3/3] netlink: add LINKSTATE SQI support Add support for SQI and master-slave - 2 - 0 0 0 2020-05-28 Oleksij Rempel New
[v2,2/3] netlink: add master/slave configuration support Add support for SQI and master-slave - - - 0 0 0 2020-05-28 Oleksij Rempel New
[v2,1/3] update UAPI header copies Add support for SQI and master-slave - - - 0 0 0 2020-05-28 Oleksij Rempel New
[v2] net: phy: at803x: add cable diagnostics support for ATH9331 and ATH8032 [v2] net: phy: at803x: add cable diagnostics support for ATH9331 and ATH8032 - 2 - 0 0 0 2020-05-27 Oleksij Rempel In Next
[net-next,v1] net: phy: at803x: add cable diagnostics support for ATH9331 and ATH8032 [net-next,v1] net: phy: at803x: add cable diagnostics support for ATH9331 and ATH8032 - 1 - 0 0 0 2020-05-26 Oleksij Rempel In Next
[ethtool,v1] netlink: add master/slave configuration support [ethtool,v1] netlink: add master/slave configuration support - - - 0 0 0 2020-05-26 Oleksij Rempel New
[ethtool,v1] netlink: add LINKSTATE SQI support [ethtool,v1] netlink: add LINKSTATE SQI support - 1 - 0 0 0 2020-05-26 Oleksij Rempel New
[v8,5/5] dt-bindings: arm: fsl: add different Protonic boards mainline Protonic boards - - - 0 0 0 2020-05-20 Oleksij Rempel New
[v8,4/5] ARM: dts: add Protonic RVT board mainline Protonic boards - 1 - 0 0 0 2020-05-20 Oleksij Rempel New
[v8,3/5] ARM: dts: add Protonic VT7 board mainline Protonic boards - 1 - 0 0 0 2020-05-20 Oleksij Rempel New
[v8,2/5] ARM: dts: add Protonic WD2 board mainline Protonic boards - 1 - 0 0 0 2020-05-20 Oleksij Rempel New
[v8,1/5] ARM: dts: add Protonic PRTI6Q board mainline Protonic boards - 1 - 0 0 0 2020-05-20 Oleksij Rempel New
[net-next,v3,2/2] net: phy: tja11xx: add SQI support provide KAPI for SQI - 1 - 0 0 0 2020-05-20 Oleksij Rempel In Next
[net-next,v3,1/2] ethtool: provide UAPI for PHY Signal Quality Index (SQI) provide KAPI for SQI - 2 - 0 0 0 2020-05-20 Oleksij Rempel In Next
[net-next,v1,2/2] net: phy: tja11xx: add SQI support [net-next,v1,1/2] ethtool: provide UAPI for PHY Signal Quality Index (SQI) - - - 0 0 0 2020-05-19 Oleksij Rempel New
[net-next,v1,1/2] ethtool: provide UAPI for PHY Signal Quality Index (SQI) [net-next,v1,1/2] ethtool: provide UAPI for PHY Signal Quality Index (SQI) - - - 0 0 0 2020-05-19 Oleksij Rempel New
[net-next,v1] net: phy: tja11xx: execute cable test on link up [net-next,v1] net: phy: tja11xx: execute cable test on link up - 1 - 0 0 0 2020-05-14 Oleksij Rempel In Next
[net-next,v1] net: phy: tja11xx: add cable-test support [net-next,v1] net: phy: tja11xx: add cable-test support - 2 - 0 0 0 2020-05-13 Oleksij Rempel In Next
[v1] net: phy: at803x: add cable test support [v1] net: phy: at803x: add cable test support - - - 0 0 0 2020-05-13 Oleksij Rempel New
[v1,2/2] MIPS: ath79: ar9331: rename uart to serial node [v1,1/2] MIPS: ath79: ar9331_dpt_module: update led nodes - - - 0 0 0 2020-05-10 Oleksij Rempel In Next
[v1,1/2] MIPS: ath79: ar9331_dpt_module: update led nodes [v1,1/2] MIPS: ath79: ar9331_dpt_module: update led nodes - - - 0 0 0 2020-05-10 Oleksij Rempel In Next
[v1] dt-bindings: serial: qca,ar9330-uart: Convert to json-schema [v1] dt-bindings: serial: qca,ar9330-uart: Convert to json-schema - - - 0 0 0 2020-05-10 Oleksij Rempel In Next
[v1] dt-bindings: net: nxp,tja11xx: rework validation support [v1] dt-bindings: net: nxp,tja11xx: rework validation support - 2 - 0 0 0 2020-05-05 Oleksij Rempel New
[net-next,v6,2/2] net: phy: tja11xx: add support for master-slave configuration provide support for PHY master/slave configuration - 1 - 0 0 0 2020-05-05 Oleksij Rempel In Next
[net-next,v6,1/2] ethtool: provide UAPI for PHY master/slave configuration. provide support for PHY master/slave configuration - 1 - 0 0 0 2020-05-05 Oleksij Rempel In Next
[RFC] dt-bindings: net: nxp,tja11xx: add compatible support [RFC] dt-bindings: net: nxp,tja11xx: add compatible support - - - 0 0 0 2020-05-04 Oleksij Rempel New
[net-next,v1] dt-bindings: net: convert qca,ar71xx documentation to yaml [net-next,v1] dt-bindings: net: convert qca,ar71xx documentation to yaml - - - 0 0 0 2020-04-24 Oleksij Rempel In Next
[net-next,v1] net: ag71xx: extend link validation to support other SoCs [net-next,v1] net: ag71xx: extend link validation to support other SoCs - - - 0 0 0 2020-04-24 Oleksij Rempel In Next
[net-next,v5,4/4] net: phy: tja11xx: add delayed registration of TJA1102 PHY1 add TJA1102 support - 1 - 0 0 0 2020-04-22 Oleksij Rempel In Next
[net-next,v5,3/4] net: mdio: of: export part of of_mdiobus_register_phy() add TJA1102 support - 2 - 0 0 0 2020-04-22 Oleksij Rempel In Next
[net-next,v5,2/4] net: phy: tja11xx: add initial TJA1102 support add TJA1102 support - 2 - 0 0 0 2020-04-22 Oleksij Rempel In Next
[net-next,v5,1/4] dt-bindings: net: phy: Add support for NXP TJA11xx add TJA1102 support - 1 - 0 0 0 2020-04-22 Oleksij Rempel In Next
[net-next,v3] net: phy: micrel: add phy-mode support for the KSZ9031 PHY [net-next,v3] net: phy: micrel: add phy-mode support for the KSZ9031 PHY - 2 - 0 0 0 2020-04-22 Oleksij Rempel In Next
[v1] net: phy: tja11xx: add support for master-slave configuration [v1] net: phy: tja11xx: add support for master-slave configuration - - - 0 0 0 2020-04-15 Oleksij Rempel New
[v1] ethtool: provide UAPI for PHY master/slave configuration. [v1] ethtool: provide UAPI for PHY master/slave configuration. - - - 0 0 0 2020-04-15 Oleksij Rempel New
[net-next,v3] net: phy: micrel: add phy-mode support for the KSZ9031 PHY [net-next,v3] net: phy: micrel: add phy-mode support for the KSZ9031 PHY - 1 - 0 0 0 2020-04-07 Oleksij Rempel In Next
[net-next,v2] net: phy: micrel: add phy-mode support for the KSZ9031 PHY [net-next,v2] net: phy: micrel: add phy-mode support for the KSZ9031 PHY - - - 0 0 0 2020-04-06 Oleksij Rempel New
[v1] net: phy: micrel: add phy-mode support for the KSZ9031 PHY [v1] net: phy: micrel: add phy-mode support for the KSZ9031 PHY - - - 0 0 0 2020-04-03 Oleksij Rempel New
[v4,5/5] ARM: dts: add Protonic RVT board mainline Protonic boards - 1 - 0 0 0 2020-03-30 Oleksij Rempel New
[v4,4/5] ARM: dts: add Protonic VT7 board mainline Protonic boards - 1 - 0 0 0 2020-03-30 Oleksij Rempel New
[v4,3/5] ARM: dts: add Protonic WD2 board mainline Protonic boards - 1 - 0 0 0 2020-03-30 Oleksij Rempel New
[v4,2/5] ARM: dts: add Protonic PRTI6Q board mainline Protonic boards - 1 - 0 0 0 2020-03-30 Oleksij Rempel New
[v4,1/5] dt-bindings: vendor-prefixes: Add an entry for Protonic Holland mainline Protonic boards - - - 0 0 0 2020-03-30 Oleksij Rempel New
[v2] ARM: imx: allow to disable board specific PHY fixups [v2] ARM: imx: allow to disable board specific PHY fixups - - - 0 0 0 2020-03-29 Oleksij Rempel New
[v1] usb: musb: dsps: set MUSB_DA8XX quirk for AM335x [v1] usb: musb: dsps: set MUSB_DA8XX quirk for AM335x - - - 0 0 0 2020-03-27 Oleksij Rempel New
[v3,5/5] ARM: dts: add Protonic RVT board mainline Protonic boards - - - 0 0 0 2020-03-24 Oleksij Rempel New
[v3,4/5] ARM: dts: add Protonic VT7 board mainline Protonic boards - - - 0 0 0 2020-03-24 Oleksij Rempel New
[v3,3/5] ARM: dts: add Protonic WD2 board mainline Protonic boards - - - 0 0 0 2020-03-24 Oleksij Rempel New
[v3,2/5] ARM: dts: add Protonic PRTI6Q board mainline Protonic boards - - - 0 0 0 2020-03-24 Oleksij Rempel New
[v3,1/5] dt-bindings: vendor-prefixes: Add an entry for Protonic Holland mainline Protonic boards - - - 0 0 0 2020-03-24 Oleksij Rempel New
[v2,5/5] ARM: dts: add Protonic RVT board mainline Protonic boards - - - 0 0 0 2020-03-19 Oleksij Rempel New
[v2,4/5] ARM: dts: add Protonic VT7 board mainline Protonic boards - - - 0 0 0 2020-03-19 Oleksij Rempel New
[v2,3/5] ARM: dts: add Protonic WD2 board mainline Protonic boards - - - 0 0 0 2020-03-19 Oleksij Rempel New
[v2,2/5] ARM: dts: add Protonic PRTI6Q board mainline Protonic boards - - - 0 0 0 2020-03-19 Oleksij Rempel New
[v2,1/5] dt-bindings: vendor-prefixes: Add an entry for Protonic Holland mainline Protonic boards - - - 0 0 0 2020-03-19 Oleksij Rempel New
[v1,6/6] m arch/arm/boot/dts/imx6q-prti6q.dts Untitled series #434494 - - - 0 0 0 2020-03-18 Oleksij Rempel New
[v1,5/6] ARM: dts: add Protonic RVT board Untitled series #434492 - - - 0 0 0 2020-03-18 Oleksij Rempel New
[v1,4/6] ARM: dts: add Protonic VT7 board Untitled series #434491 - - - 0 0 0 2020-03-18 Oleksij Rempel New
[v1,3/6] ARM: dts: add Protonic WD2 board Untitled series #434495 - - - 0 0 0 2020-03-18 Oleksij Rempel New
[v1,2/6] ARM: dts: add Protonic PRTI6Q board Untitled series #434493 - - - 0 0 0 2020-03-18 Oleksij Rempel New
[v1,1/6] dt-bindings: vendor-prefixes: Add an entry for Protonic Holland [v1,1/6] dt-bindings: vendor-prefixes: Add an entry for Protonic Holland - - - 0 0 0 2020-03-18 Oleksij Rempel New
[v4,4/4] net: phy: tja11xx: add delayed registration of TJA1102 PHY1 add TJA1102 support - - - 0 0 0 2020-03-13 Oleksij Rempel New
[v4,3/4] net: mdio: of: export part of of_mdiobus_register_phy() add TJA1102 support - - - 0 0 0 2020-03-13 Oleksij Rempel New
[v4,2/4] net: phy: tja11xx: add initial TJA1102 support add TJA1102 support - - - 0 0 0 2020-03-13 Oleksij Rempel New
[v4,1/4] dt-bindings: net: phy: Add support for NXP TJA11xx add TJA1102 support - - - 0 0 0 2020-03-13 Oleksij Rempel New
[v1] ARM: dts: imx6q-marsboard: properly define rgmii PHY [v1] ARM: dts: imx6q-marsboard: properly define rgmii PHY - - - 0 0 0 2020-03-06 Oleksij Rempel New
[v1] ARM: dts: imx6dl-riotboard: properly define rgmii PHY [v1] ARM: dts: imx6dl-riotboard: properly define rgmii PHY - - - 0 0 0 2020-03-04 Oleksij Rempel New
[v1] net: phy: tja11xx: add TJA1102 support [v1] net: phy: tja11xx: add TJA1102 support - - - 0 0 0 2020-03-03 Oleksij Rempel New
[v1] MAINTAINERS: mailbox: imx: take over maintainership [v1] MAINTAINERS: mailbox: imx: take over maintainership 1 - - 0 0 0 2020-03-03 Oleksij Rempel New
[V1,2/2] hwmon: (powr1220) add scaled voltage support [V1,1/2] hwmon: (powr1220) Add support for Lattice's POWR1014 power manager IC - - - 0 0 0 2020-01-27 Oleksij Rempel New
[V1,1/2] hwmon: (powr1220) Add support for Lattice's POWR1014 power manager IC [V1,1/2] hwmon: (powr1220) Add support for Lattice's POWR1014 power manager IC - - - 0 0 0 2020-01-27 Oleksij Rempel New
[v7,4/4] net: dsa: add support for Atheros AR9331 built-in switch add dsa switch support for ar9331 - 2 - 0 0 0 2019-12-18 Oleksij Rempel New
[v7,3/4] net: dsa: add support for Atheros AR9331 TAG format add dsa switch support for ar9331 - 2 - 0 0 0 2019-12-18 Oleksij Rempel New
[v7,2/4] MIPS: ath79: ar9331: add ar9331-switch node add dsa switch support for ar9331 - - - 0 0 0 2019-12-18 Oleksij Rempel New
[v7,1/4] dt-bindings: net: dsa: qca,ar9331 switch documentation add dsa switch support for ar9331 - - - 0 0 0 2019-12-18 Oleksij Rempel New
[v1] ARM i.MX6q: make sure PHY fixup for KSZ9031 is applied only on one board [v1] ARM i.MX6q: make sure PHY fixup for KSZ9031 is applied only on one board - - - 0 0 0 2019-12-09 Oleksij Rempel New
[v2] net: dsa: sja1105: print info about probed chip only after everything was done. [v2] net: dsa: sja1105: print info about probed chip only after everything was done. - 1 - 0 0 0 2019-11-26 Oleksij Rempel New