Show patches with: Submitter = Alexandre Belloni       |    State = Action Required       |    Archived = No       |   109 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v5,9/9] clocksource/drivers/timer-atmel-tcb: add sama5d2 support clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-06-25 Alexandre Belloni New
[v5,8/9] clocksource/drivers/timer-atmel-tcb: allow selecting first divider clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-06-25 Alexandre Belloni New
[v5,7/9] clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for clockevents clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-06-25 Alexandre Belloni New
[v5,6/9] clocksource/drivers/timer-atmel-tcb: fill tcb_config clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-06-25 Alexandre Belloni New
[v5,5/9] clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-06-25 Alexandre Belloni New
[v5,4/9] ARM: at91: add atmel tcb capabilities clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-06-25 Alexandre Belloni New
[v5,3/9] ARM: dts: at91: sama5d2: add TCB GCLK clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-06-25 Alexandre Belloni New
[v5,2/9] dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-06-25 Alexandre Belloni New
[v5,1/9] dt-bindings: atmel-tcb: convert bindings to json-schema clocksource/drivers/timer-atmel-tcb: add sama5d2 support - 1 - 0 0 0 2020-06-25 Alexandre Belloni New
[GIT,PULL] RTC for 5.8 [GIT,PULL] RTC for 5.8 - - - 0 0 0 2020-06-07 Alexandre Belloni In Next
[v4,9/9] clocksource/drivers/timer-atmel-tcb: add sama5d2 support clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-29 Alexandre Belloni New
[v4,8/9] clocksource/drivers/timer-atmel-tcb: allow selecting first divider clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-29 Alexandre Belloni New
[v4,7/9] clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for clockevents clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-29 Alexandre Belloni New
[v4,6/9] clocksource/drivers/timer-atmel-tcb: fill tcb_config clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-29 Alexandre Belloni New
[v4,5/9] clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-29 Alexandre Belloni New
[v4,4/9] ARM: at91: add atmel tcb capabilities clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-29 Alexandre Belloni New
[v4,3/9] ARM: dts: at91: sama5d2: add TCB GCLK clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-29 Alexandre Belloni New
[v4,2/9] dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible clocksource/drivers/timer-atmel-tcb: add sama5d2 support - 1 - 0 0 0 2020-05-29 Alexandre Belloni New
[v4,1/9] dt-bindings: atmel-tcb: convert bindings to json-schema clocksource/drivers/timer-atmel-tcb: add sama5d2 support - 1 - 0 0 0 2020-05-29 Alexandre Belloni New
[v2] rtc: pcf2127: report battery switch over [v2] rtc: pcf2127: report battery switch over - - - 0 0 0 2020-05-11 Alexandre Belloni In Next
greybus: audio: remove unused code greybus: audio: remove unused code 1 - - 0 0 0 2020-05-07 Alexandre Belloni New
[v3,9/9] clocksource/drivers/timer-atmel-tcb: add sama5d2 support clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-06 Alexandre Belloni In Next
[v3,8/9] clocksource/drivers/timer-atmel-tcb: allow selecting first divider clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-06 Alexandre Belloni In Next
[v3,7/9] clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for clockevents clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-06 Alexandre Belloni In Next
[v3,6/9] clocksource/drivers/timer-atmel-tcb: fill tcb_config clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-06 Alexandre Belloni In Next
[v3,5/9] clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-06 Alexandre Belloni In Next
[v3,4/9] ARM: at91: add atmel tcb capabilities clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-06 Alexandre Belloni In Next
[v3,3/9] ARM: dts: at91: sama5d2: add TCB GCLK clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-06 Alexandre Belloni In Next
[v3,2/9] dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-06 Alexandre Belloni In Next
[v3,1/9] dt-bindings: atmel-tcb: convert bindings to json-schema clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2020-05-06 Alexandre Belloni In Next
[5/5] rtc: pcf2127: report battery switch over [1/5] rtc: add new VL flag for backup switchover - - - 0 0 0 2020-05-05 Alexandre Belloni New
[4/5] rtc: pcf2127: set regmap max_register [1/5] rtc: add new VL flag for backup switchover - - - 0 0 0 2020-05-05 Alexandre Belloni New
[3/5] rtc: pcf2127: remove unnecessary #ifdef [1/5] rtc: add new VL flag for backup switchover - - - 0 0 0 2020-05-05 Alexandre Belloni New
[2/5] rtc: pcf2127: let the core handle rtc range [1/5] rtc: add new VL flag for backup switchover - - - 0 0 0 2020-05-05 Alexandre Belloni New
[1/5] rtc: add new VL flag for backup switchover [1/5] rtc: add new VL flag for backup switchover - - - 0 0 0 2020-05-05 Alexandre Belloni New
[v2,2/2] iio: adc: ti-ads8344: optimize consumption iio: adc: ti-ads8344: driver improvements - - - 0 0 0 2020-04-16 Alexandre Belloni New
[v2,1/2] iio: adc: ti-ads8344: properly byte swap value iio: adc: ti-ads8344: driver improvements - - - 0 0 0 2020-04-16 Alexandre Belloni New
[3/3] iio: adc: ti-ads8344: optimize consumption iio: adc: ti-ads8344: improve the driver - - - 0 0 0 2020-04-15 Alexandre Belloni New
[2/3] iio: adc: ti-ads8344: remove tx_buf from driver data iio: adc: ti-ads8344: improve the driver - - - 0 0 0 2020-04-15 Alexandre Belloni New
[1/3] iio: adc: ti-ads8344: properly byte swap value iio: adc: ti-ads8344: improve the driver - - - 0 0 0 2020-04-15 Alexandre Belloni New
rtc: 88pm860x: remove useless range check rtc: 88pm860x: remove useless range check - - - 0 0 0 2020-04-15 Alexandre Belloni In Next
[2/2] rtc: mt2712: switch to devm_platform_ioremap_resource [1/2] rtc: mt2712: remove unnecessary error string - - - 0 0 0 2020-04-15 Alexandre Belloni In Next
[1/2] rtc: mt2712: remove unnecessary error string [1/2] rtc: mt2712: remove unnecessary error string - - - 0 0 0 2020-04-15 Alexandre Belloni In Next
[1/2] rtc: sun6i: let the core handle rtc range [1/2] rtc: sun6i: let the core handle rtc range - - - 0 0 0 2020-03-30 Alexandre Belloni New
[2/2] rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64 Untitled series #436601 - - - 0 0 0 2020-03-30 Alexandre Belloni New
[1/2] rtc: sun6i: let the core handle rtc range [1/2] rtc: sun6i: let the core handle rtc range - - 1 0 0 0 2020-03-30 Alexandre Belloni New
ARM: dts: at91: rm9200: switch to new clock bindings ARM: dts: at91: rm9200: switch to new clock bindings - - - 0 0 0 2020-03-24 Alexandre Belloni In Next
[2/2] rtc: mt2712: remove unused variable [1/2] rtc: mt2712: fix build without PM_SLEEP - - - 0 0 0 2020-03-16 Alexandre Belloni New
[1/2] rtc: mt2712: fix build without PM_SLEEP [1/2] rtc: mt2712: fix build without PM_SLEEP - - - 0 0 0 2020-03-16 Alexandre Belloni New
[3/3] rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64 [1/3] rtc: da9052: convert to devm_rtc_allocate_device 1 - - 0 0 0 2020-03-06 Alexandre Belloni New
[2/3] rtc: da9052: set range [1/3] rtc: da9052: convert to devm_rtc_allocate_device 1 - - 0 0 0 2020-03-06 Alexandre Belloni New
[1/3] rtc: da9052: convert to devm_rtc_allocate_device [1/3] rtc: da9052: convert to devm_rtc_allocate_device - - - 0 0 0 2020-03-06 Alexandre Belloni New
clk: at91: add at91rm9200 pmc driver clk: at91: add at91rm9200 pmc driver - - - 0 0 0 2020-02-14 Alexandre Belloni New
can: flexcan: fix spelling mistake "reserverd" -> "reserved" can: flexcan: fix spelling mistake "reserverd" -> "reserved" - - - 0 0 0 2020-02-14 Alexandre Belloni New
[v2] clk: at91: add at91sam9n12 pmc driver [v2] clk: at91: add at91sam9n12 pmc driver - - - 0 0 0 2020-01-17 Alexandre Belloni New
ARM: dts: at91: at91sam9g45: switch to new clock bindings ARM: dts: at91: at91sam9g45: switch to new clock bindings - - - 0 0 0 2020-01-17 Alexandre Belloni In Next
ARM: dts: at91: at91sam9n12: switch to new clock bindings ARM: dts: at91: at91sam9n12: switch to new clock bindings - - - 0 0 0 2020-01-16 Alexandre Belloni New
[2/2] ARM: dts: at91: at91sam9n12: switch to new sckc bindings [1/2] ARM: dts: at91: at91sam9n12: properly order shdwc node - - - 0 0 0 2020-01-16 Alexandre Belloni New
[1/2] ARM: dts: at91: at91sam9n12: properly order shdwc node [1/2] ARM: dts: at91: at91sam9n12: properly order shdwc node - - - 0 0 0 2020-01-16 Alexandre Belloni New
[v2] clk: at91: add sama5d3 pmc driver [v2] clk: at91: add sama5d3 pmc driver - - - 0 0 0 2020-01-10 Alexandre Belloni New
[v2] ARM: dts: at91: sama5d3: switch to new clock bindings [v2] ARM: dts: at91: sama5d3: switch to new clock bindings - - - 0 0 0 2020-01-10 Alexandre Belloni New
[9/9] ARM: dts: at91: sama5d4: use correct rtc compatible [1/9] rtc: at91rm9200: remove procfs information - - - 0 0 0 2019-12-29 Alexandre Belloni New
[8/9] ARM: dts: at91: sama5d2: use correct rtc compatible [1/9] rtc: at91rm9200: remove procfs information - - - 0 0 0 2019-12-29 Alexandre Belloni New
[7/9] rtc: at91rm9200: add correction support [1/9] rtc: at91rm9200: remove procfs information - - - 0 0 0 2019-12-29 Alexandre Belloni New
[6/9] rtc: at91rm9200: use FIELD_PREP/FIELD_GET [1/9] rtc: at91rm9200: remove procfs information - - - 0 0 0 2019-12-29 Alexandre Belloni New
[5/9] rtc: at91rm9200: avoid time readout in at91_rtc_setalarm [1/9] rtc: at91rm9200: remove procfs information - - - 0 0 0 2019-12-29 Alexandre Belloni New
[4/9] rtc: at91rm9200: move register definitions to C file [1/9] rtc: at91rm9200: remove procfs information - - - 0 0 0 2019-12-29 Alexandre Belloni New
[3/9] rtc: at91rm9200: add sama5d4 and sama5d2 compatibles [1/9] rtc: at91rm9200: remove procfs information - - - 0 0 0 2019-12-29 Alexandre Belloni New
[2/9] dt-bindings: rtc: at91rm9200: convert bindings to json-schema [1/9] rtc: at91rm9200: remove procfs information - - - 0 0 0 2019-12-29 Alexandre Belloni New
[1/9] rtc: at91rm9200: remove procfs information [1/9] rtc: at91rm9200: remove procfs information - - - 0 0 0 2019-12-29 Alexandre Belloni New
[16/16] rtc: rv3029: add nvram support rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[15/16] rtc: rv3029: annotate init and exit functions rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[14/16] rtc: rv3029: remove useless error messages rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[13/16] rtc: rv3029: let the core handle rtc range rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[12/16] rtc: rv3029: convert to devm_rtc_allocate_device rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[11/16] rtc: rv3029: correctly handle PON and VLOW2 rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[10/16] rtc: rv3029: add RTC_VL_READ and RTC_VL_CLEAR support rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[09/16] rtc: rv3029: drop rv3029_read_regs and rv3029_write_regs rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[08/16] rtc: rv3029: simplify rv3029_set_alarm rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[07/16] rtc: rv3029: simplify rv3029_alarm_irq_enable rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[06/16] rtc: rv3029: get rid of rv3029_get_sr rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[05/16] rtc: rv3029: avoid reading the status register uselessly rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[04/16] rtc: rv3029: remove race condition when update STATUS rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[03/16] rtc: rv3029: remove open coded regmap_update_bits rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[02/16] rtc: rv3029: let regmap validate the register ranges rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[01/16] rtc: rv3029: use proper name for the driver rtc: rv3029: cleanup and features - - - 0 0 0 2019-12-14 Alexandre Belloni In Next
[4/4] rtc: fsl-ftm-alarm: avoid struct rtc_time conversions [1/4] rtc: fsl-ftm-alarm: allow COMPILE_TEST - - - 0 0 0 2019-10-16 Alexandre Belloni In Next
[3/4] rtc: fsl-ftm-alarm: switch to rtc_time64_to_tm/rtc_tm_to_time64 [1/4] rtc: fsl-ftm-alarm: allow COMPILE_TEST - - - 0 0 0 2019-10-16 Alexandre Belloni In Next
[2/4] rtc: fsl-ftm-alarm: switch to ktime_get_real_seconds [1/4] rtc: fsl-ftm-alarm: allow COMPILE_TEST - - - 0 0 0 2019-10-16 Alexandre Belloni In Next
[1/4] rtc: fsl-ftm-alarm: allow COMPILE_TEST [1/4] rtc: fsl-ftm-alarm: allow COMPILE_TEST - - - 0 0 0 2019-10-16 Alexandre Belloni In Next
[8/8] clocksource/drivers/timer-atmel-tcb: add sama5d2 support clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2019-10-09 Alexandre Belloni In Next
[7/8] clocksource/drivers/timer-atmel-tcb: allow selecting first divider clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2019-10-09 Alexandre Belloni In Next
[6/8] clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for clockevents clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2019-10-09 Alexandre Belloni In Next
[5/8] clocksource/drivers/timer-atmel-tcb: fill tcb_config clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2019-10-09 Alexandre Belloni In Next
[4/8] clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2019-10-09 Alexandre Belloni In Next
[3/8] ARM: dts: at91: sama5d2: add TCB GCLK clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2019-10-09 Alexandre Belloni In Next
[2/8] dt-bindings: mfd: atmel,at91rm9200-tcb: add sama5d2 compatible clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2019-10-09 Alexandre Belloni In Next
[1/8] dt-bindings: mfd: atmel-tcb: convert bindings to json-schema clocksource/drivers/timer-atmel-tcb: add sama5d2 support - - - 0 0 0 2019-10-09 Alexandre Belloni In Next
[2/2] rtc: remove superfluous error message [1/2] rtc: class: add debug message when registration fails - - - 0 0 0 2019-08-18 Alexandre Belloni In Next
[1/2] rtc: class: add debug message when registration fails [1/2] rtc: class: add debug message when registration fails - - - 0 0 0 2019-08-18 Alexandre Belloni In Next
« 1 2 »