Show patches with: Submitter = Nicolas Saenz Julienne       |    Archived = No       |   297 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
xhci: fix 'broken_suspend' placement in struct xchi_hcd xhci: fix 'broken_suspend' placement in struct xchi_hcd 1 - - 0 0 0 2018-12-17 Nicolas Saenz Julienne Accepted
[v8,4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk USB: pci-quirks: Add Raspberry Pi 4 quirk 1 1 - 0 0 0 2020-05-05 Nicolas Saenz Julienne Accepted
[v8,3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present USB: pci-quirks: Add Raspberry Pi 4 quirk - 2 - 0 0 0 2020-05-05 Nicolas Saenz Julienne Accepted
[v8,2/4] firmware: raspberrypi: Introduce vl805 init routine USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 2 0 0 0 2020-05-05 Nicolas Saenz Julienne Accepted
[v8,1/4] soc: bcm2835: Add notify xHCI reset property USB: pci-quirks: Add Raspberry Pi 4 quirk - 2 - 0 0 0 2020-05-05 Nicolas Saenz Julienne Accepted
[v7,7/7] mm: Remove examples from enum zone_type comment arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-11-19 Nicolas Saenz Julienne Accepted
[v7,6/7] arm64: mm: Set ZONE_DMA size based on early IORT scan arm64: Default to 32-bit wide ZONE_DMA 2 - 1 0 0 0 2020-11-19 Nicolas Saenz Julienne Accepted
[v7,5/7] arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges arm64: Default to 32-bit wide ZONE_DMA - - - 0 0 0 2020-11-19 Nicolas Saenz Julienne Accepted
[v7,4/7] of: unittest: Add test for of_dma_get_max_cpu_address() arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-11-19 Nicolas Saenz Julienne Accepted
[v7,4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk USB: pci-quirks: Add Raspberry Pi 4 quirk - - - 0 0 0 2020-04-29 Nicolas Saenz Julienne Superseded
[v7,3/7] of/address: Introduce of_dma_get_max_cpu_address() arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-11-19 Nicolas Saenz Julienne Accepted
[v7,3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 - 0 0 0 2020-04-29 Nicolas Saenz Julienne Superseded
[v7,2/7] arm64: mm: Move zone_dma_bits initialization into zone_sizes_init() arm64: Default to 32-bit wide ZONE_DMA - - 1 0 0 0 2020-11-19 Nicolas Saenz Julienne Accepted
[v7,2/4] firmware: raspberrypi: Introduce vl805 init routine USB: pci-quirks: Add Raspberry Pi 4 quirk - - - 0 0 0 2020-04-29 Nicolas Saenz Julienne Superseded
[v7,1/7] arm64: mm: Move reserve_crashkernel() into mem_init() arm64: Default to 32-bit wide ZONE_DMA - - 1 0 0 0 2020-11-19 Nicolas Saenz Julienne Accepted
[v7,1/4] soc: bcm2835: Add notify xHCI reset property USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 - 0 0 0 2020-04-29 Nicolas Saenz Julienne Superseded
[v6,4/4] mm: refresh ZONE_DMA and ZONE_DMA32 comments in 'enum zone_type' Raspberry Pi 4 DMA addressing support - 2 - 0 0 0 2019-09-11 Nicolas Saenz Julienne Accepted
[v6,3/4] arm64: use both ZONE_DMA and ZONE_DMA32 Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-11 Nicolas Saenz Julienne Accepted
[v6,2/4] arm64: rename variables used to calculate ZONE_DMA32's size Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-11 Nicolas Saenz Julienne Accepted
[v6,1/4] arm64: mm: use arm64_dma_phys_limit instead of calling max_zone_dma_phys() Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-11 Nicolas Saenz Julienne Accepted
[v5,4/4] mm: refresh ZONE_DMA and ZONE_DMA32 comments in 'enum zone_type' Raspberry Pi 4 DMA addressing support - 2 - 0 0 0 2019-09-09 Nicolas Saenz Julienne Superseded
[v5,3/4] arm64: use both ZONE_DMA and ZONE_DMA32 Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-09 Nicolas Saenz Julienne Superseded
[v5,2/4] arm64: rename variables used to calculate ZONE_DMA32's size Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-09 Nicolas Saenz Julienne Superseded
[v5,1/4] arm64: mm: use arm64_dma_phys_limit instead of calling max_zone_dma_phys() Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-09 Nicolas Saenz Julienne Superseded
[v4] usb: hub: add retry routine after intr URB submit error [v4] usb: hub: add retry routine after intr URB submit error 1 1 - 0 0 0 2019-01-08 Nicolas Saenz Julienne Accepted
[v4] HID: core: move Usage Page concatenation to Main item [v4] HID: core: move Usage Page concatenation to Main item - - - 0 0 0 2019-03-27 Nicolas Saenz Julienne Accepted
[v4,4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk USB: pci-quirks: Add Raspberry Pi 4 quirk - - - 0 0 0 2020-03-06 Nicolas Saenz Julienne Superseded
[v4,4/4] mm: refresh ZONE_DMA and ZONE_DMA32 comments in 'enum zone_type' Raspberry Pi 4 DMA addressing support - 2 - 0 0 0 2019-09-06 Nicolas Saenz Julienne Superseded
[v4,3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 - 0 0 0 2020-03-06 Nicolas Saenz Julienne Superseded
[v4,3/4] arm64: use both ZONE_DMA and ZONE_DMA32 Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-06 Nicolas Saenz Julienne Superseded
[v4,2/4] firmware: raspberrypi: Introduce vl805 init routine USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 - 0 0 0 2020-03-06 Nicolas Saenz Julienne Superseded
[v4,2/4] arm64: rename variables used to calculate ZONE_DMA32's size Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-06 Nicolas Saenz Julienne Superseded
[v4,2/2] dma-pool: fix coherent pool allocations for IOMMU mappings dma-pool fixes - - - 0 0 0 2020-08-14 Nicolas Saenz Julienne Accepted
[v4,1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 - 0 0 0 2020-03-06 Nicolas Saenz Julienne Superseded
[v4,1/4] arm64: mm: use arm64_dma_phys_limit instead of calling max_zone_dma_phys() Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-06 Nicolas Saenz Julienne Superseded
[v4,1/2] dma-pool: Only allocate from CMA when in same memory zone dma-pool fixes - - - 0 0 0 2020-08-14 Nicolas Saenz Julienne Accepted
[v3] HID: core: move Usage Page concatenation to Main item [v3] HID: core: move Usage Page concatenation to Main item - - - 0 0 0 2019-03-26 Nicolas Saenz Julienne Superseded
[v3,7/7] arm64: defconfig: enable cpufreq support for RPi3 cpufreq support for Raspberry Pi - - - 0 0 0 2019-06-11 Nicolas Saenz Julienne Superseded
[v3,7/7] arm64: defconfig: Enable Broadcom's STB PCIe controller Raspberry Pi 4 PCIe support - - - 0 0 0 2019-11-26 Nicolas Saenz Julienne Superseded
[v3,6/7] MAINTAINERS: Add brcmstb PCIe controller Raspberry Pi 4 PCIe support - - - 0 0 0 2019-11-26 Nicolas Saenz Julienne Superseded
[v3,6/7] ARM: defconfig: enable cpufreq driver for RPi cpufreq support for Raspberry Pi - - - 0 0 0 2019-06-11 Nicolas Saenz Julienne Superseded
[v3,5/7] PCI: brcmstb: add MSI capability Raspberry Pi 4 PCIe support - 2 - 0 0 0 2019-11-26 Nicolas Saenz Julienne Superseded
[v3,5/7] clk: raspberrypi: register platform device for raspberrypi-cpufreq cpufreq support for Raspberry Pi 1 1 - 0 0 0 2019-06-11 Nicolas Saenz Julienne Superseded
[v3,4/7] PCI: brcmstb: add Broadcom STB PCIe host controller driver Raspberry Pi 4 PCIe support - 2 - 0 0 0 2019-11-26 Nicolas Saenz Julienne Superseded
[v3,4/7] cpufreq: add driver for Raspbery Pi cpufreq support for Raspberry Pi 1 1 - 0 0 0 2019-06-11 Nicolas Saenz Julienne Superseded
[v3,4/4] staging: vchiq: stop explicitly comparing with zero to catch errors staging: vchiq: use interruptible waits - - - 0 0 0 2019-05-09 Nicolas Saenz Julienne Accepted
[v3,4/4] mm: refresh ZONE_DMA and ZONE_DMA32 comments in 'enum zone_type' Raspberry Pi 4 DMA addressing support - 2 - 0 0 0 2019-09-02 Nicolas Saenz Julienne Superseded
[v3,3/7] firmware: raspberrypi: register clk device cpufreq support for Raspberry Pi 1 1 - 0 0 0 2019-06-11 Nicolas Saenz Julienne Superseded
[v3,3/7] ARM: dts: bcm2711: Enable PCIe controller Raspberry Pi 4 PCIe support - - - 0 0 0 2019-11-26 Nicolas Saenz Julienne Superseded
[v3,3/4] staging: vchiq: make wait events interruptible staging: vchiq: use interruptible waits - - - 0 0 0 2019-05-09 Nicolas Saenz Julienne Accepted
[v3,3/4] arm64: use both ZONE_DMA and ZONE_DMA32 Raspberry Pi 4 DMA addressing support - - - 0 0 0 2019-09-02 Nicolas Saenz Julienne Superseded
[v3,2/7] dt-bindings: PCI: Add bindings for brcmstb's PCIe device Raspberry Pi 4 PCIe support - 1 - 0 0 0 2019-11-26 Nicolas Saenz Julienne Superseded
[v3,2/7] clk: bcm283x: add driver interfacing with Raspberry Pi's firmware cpufreq support for Raspberry Pi 1 1 - 0 0 0 2019-06-11 Nicolas Saenz Julienne Superseded
[v3,2/4] staging: vchiq: revert "switch to wait_for_completion_killable" staging: vchiq: use interruptible waits - - - 0 0 0 2019-05-09 Nicolas Saenz Julienne Accepted
[v3,2/4] arm64: rename variables used to calculate ZONE_DMA32's size Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-02 Nicolas Saenz Julienne Superseded
[v3,2/2] x86/PCI: sta2x11: use default DMA address translation x86: Get rid of custom DMA functions - 1 - 0 0 0 2019-11-07 Nicolas Saenz Julienne Accepted
[v3,2/2] of: property: Do not link to disabled devices of: property: fw_devlink misc fixes - 1 - 0 0 0 2020-04-20 Nicolas Saenz Julienne Accepted
[v3,2/2] dma-pool: Only allocate from CMA when in same memory zone dma-pool fixes - - - 0 0 0 2020-08-06 Nicolas Saenz Julienne Superseded
[v3,1/7] linux/log2.h: Add roundup/rounddown_pow_two64() family of functions Raspberry Pi 4 PCIe support - - - 0 0 0 2019-11-26 Nicolas Saenz Julienne Superseded
[v3,1/7] clk: bcm2835: remove pllb cpufreq support for Raspberry Pi 1 1 - 0 0 0 2019-06-11 Nicolas Saenz Julienne Superseded
[v3,15/15] arm64: config: Enable DRM_V3D Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,1/4] staging: vchiq_2835_arm: revert "quit using custom down_interruptible()" staging: vchiq: use interruptible waits 1 - - 0 0 0 2019-05-09 Nicolas Saenz Julienne Accepted
[v3,1/4] arm64: mm: use arm64_dma_phys_limit instead of calling max_zone_dma_phys() Raspberry Pi 4 DMA addressing support - 1 - 0 0 0 2019-09-02 Nicolas Saenz Julienne Superseded
[v3,14/15] ARM: configs: Enable DRM_V3D Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,13/15] ARM: dts: bcm2711: Enable V3D Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,1/2] of: property: Fix create device links for all child-supplier dependencies of: property: fw_devlink misc fixes - 1 - 0 0 0 2020-04-20 Nicolas Saenz Julienne Accepted
[v3,1/2] dma-pool: fix coherent pool allocations for IOMMU mappings dma-pool fixes - - - 0 0 0 2020-08-06 Nicolas Saenz Julienne Superseded
[v3,1/2] dma-direct: check for overflows on 32 bit DMA addresses x86: Get rid of custom DMA functions - - - 0 0 0 2019-11-07 Nicolas Saenz Julienne Accepted
[v3,12/15] drm/v3d: Add support for bcm2711 Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,11/15] drm/v3d: Get rid of pm code Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,10/15] dt-bindings: gpu: v3d: Add BCM2711's compatible Raspberry PI 4 V3D enablement - 1 - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,09/15] soc: bcm: bcm2835-power: Bypass power_on/off() calls Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,08/15] soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,07/15] mfd: bcm2835-pm: Add support for BCM2711 Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,06/15] mfd: bcm2835-pm: Use 'reg-names' to get resources Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,05/15] ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,04/15] ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,03/15] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711 Raspberry PI 4 V3D enablement - 1 - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,02/15] dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v3,01/15] dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema Raspberry PI 4 V3D enablement - - - 0 0 0 2021-02-17 Nicolas Saenz Julienne New
[v2] mmc: sdhci-iproc: fix spurious interrupts on Multiblock reads with bcm2711 [v2] mmc: sdhci-iproc: fix spurious interrupts on Multiblock reads with bcm2711 1 - 1 0 0 0 2019-10-04 Nicolas Saenz Julienne Accepted
[v2] HID: input: fix a4tech horizontal wheel custom usage [v2] HID: input: fix a4tech horizontal wheel custom usage - - - 0 0 0 2019-06-11 Nicolas Saenz Julienne Accepted
[v2] firmware: stratix10-svc: fix wrong of_node_put() in init function [v2] firmware: stratix10-svc: fix wrong of_node_put() in init function - - - 0 0 0 2018-12-03 Nicolas Saenz Julienne Accepted
[v2] dma-mapping: treat dev->bus_dma_mask as a DMA limit [v2] dma-mapping: treat dev->bus_dma_mask as a DMA limit - 1 - 0 0 0 2019-11-21 Nicolas Saenz Julienne Accepted
[v2] clk: bcm2835: Do not use prediv with bcm2711's PLLs [v2] clk: bcm2835: Do not use prediv with bcm2711's PLLs - 1 1 0 0 0 2020-07-30 Nicolas Saenz Julienne Accepted
[v2] brcmfmac: Set timeout value when configuring power save [v2] brcmfmac: Set timeout value when configuring power save - - - 0 0 0 2020-07-21 Nicolas Saenz Julienne Accepted
[v2,7/7] staging: bcm2835-audio: update TODO staging: bcm2835-audio: Cleanups and upgrades - - - 0 0 0 2018-10-17 Nicolas Saenz Julienne Accepted
[v2,7/7] arm64: defconfig: enable cpufreq support for RPi3 cpufreq support for Raspberry Pi - - - 0 0 0 2019-06-06 Nicolas Saenz Julienne Superseded
[v2,6/7] staging: bcm2835-audio: rename platform_driver structure staging: bcm2835-audio: Cleanups and upgrades - - - 0 0 0 2018-10-17 Nicolas Saenz Julienne Accepted
[v2,6/7] ARM: defconfig: enable cpufreq driver for RPi cpufreq support for Raspberry Pi - - - 0 0 0 2019-06-06 Nicolas Saenz Julienne Superseded
[v2,6/6] MAINTAINERS: Add brcmstb PCIe controller Raspberry Pi 4 PCIe support - - - 0 0 0 2019-11-12 Nicolas Saenz Julienne Superseded
[v2,5/7] staging: bcm2835-audio: more generic probe function name staging: bcm2835-audio: Cleanups and upgrades 1 1 - 0 0 0 2018-10-17 Nicolas Saenz Julienne Accepted
[v2,5/7] clk: raspberrypi: register platform device for raspberrypi-cpufreq cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-06 Nicolas Saenz Julienne Superseded
[v2,5/6] PCI: brcmstb: add MSI capability Raspberry Pi 4 PCIe support - 1 - 0 0 0 2019-11-12 Nicolas Saenz Julienne Superseded
[v2,4/7] staging: bcm2835-audio: use anonymous union in struct vc_audio_msg staging: bcm2835-audio: Cleanups and upgrades 1 1 - 0 0 0 2018-10-17 Nicolas Saenz Julienne Accepted
[v2,4/7] cpufreq: add driver for Raspbery Pi cpufreq support for Raspberry Pi 1 1 - 0 0 0 2019-06-06 Nicolas Saenz Julienne Superseded
[v2,4/6] PCI: brcmstb: add Broadcom STB PCIe host controller driver Raspberry Pi 4 PCIe support - - - 0 0 0 2019-11-12 Nicolas Saenz Julienne Superseded
[v2,4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk Raspberry Pi 4 VL805 firmware load support - - - 0 0 0 2020-02-19 Nicolas Saenz Julienne Superseded
[v2,4/4] dma-pool: Make sure atomic pool suits device dma-pool: Fix atomic pool selection - - - 0 0 0 2020-07-14 Nicolas Saenz Julienne Accepted
[v2,3/7] staging: bcm2835-audio: reorder variable declarations & remove trivial comments staging: bcm2835-audio: Cleanups and upgrades 1 1 - 0 0 0 2018-10-17 Nicolas Saenz Julienne Accepted
« 1 2 3 »