Show patches with: Submitter = Nicolas Saenz Julienne       |    Archived = No       |   280 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v5,11/11] pwm: Add Raspberry Pi Firmware based PWM bus Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[v5,10/11] DO NOT MERGE: ARM: dts: Add RPi's official PoE hat support Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[v5,09/11] dt-bindings: pwm: Add binding for RPi firmware PWM bus Raspberry Pi PoE HAT fan support - 1 - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[v5,08/11] input: raspberrypi-ts: Release firmware handle when not needed Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[v5,07/11] staging: vchiq: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[v5,06/11] soc: bcm: raspberrypi-power: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[v5,05/11] reset: raspberrypi: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[v5,04/11] gpio: raspberrypi-exp: Release firmware handle on unbind Raspberry Pi PoE HAT fan support 1 - - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[v5,03/11] clk: bcm: rpi: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[v5,02/11] firmware: raspberrypi: Introduce devm_rpi_firmware_get() Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[v5,01/11] firmware: raspberrypi: Keep count of all consumers Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-23 Nicolas Saenz Julienne New
[GIT,PULL,1/1] bcm2835-dt-next-2020-11-20 [GIT,PULL,1/1] bcm2835-dt-next-2020-11-20 - - - 0 0 0 2020-11-20 Nicolas Saenz Julienne New
[v7,7/7] mm: Remove examples from enum zone_type comment arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-11-19 Nicolas Saenz Julienne In Next
[v7,6/7] arm64: mm: Set ZONE_DMA size based on early IORT scan arm64: Default to 32-bit wide ZONE_DMA 2 - 1 0 0 0 2020-11-19 Nicolas Saenz Julienne In Next
[v7,5/7] arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges arm64: Default to 32-bit wide ZONE_DMA - - - 0 0 0 2020-11-19 Nicolas Saenz Julienne In Next
[v7,4/7] of: unittest: Add test for of_dma_get_max_cpu_address() arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-11-19 Nicolas Saenz Julienne In Next
[v7,3/7] of/address: Introduce of_dma_get_max_cpu_address() arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-11-19 Nicolas Saenz Julienne In Next
[v7,2/7] arm64: mm: Move zone_dma_bits initialization into zone_sizes_init() arm64: Default to 32-bit wide ZONE_DMA - - 1 0 0 0 2020-11-19 Nicolas Saenz Julienne In Next
[v7,1/7] arm64: mm: Move reserve_crashkernel() into mem_init() arm64: Default to 32-bit wide ZONE_DMA - - 1 0 0 0 2020-11-19 Nicolas Saenz Julienne In Next
[v4,11/11] pwm: Add Raspberry Pi Firmware based PWM bus Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v4,10/11] DO NOT MERGE: ARM: dts: Add RPi's official PoE hat support Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v4,09/11] dt-bindings: pwm: Add binding for RPi firmware PWM bus Raspberry Pi PoE HAT fan support - 1 - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v4,08/11] input: raspberrypi-ts: Release firmware handle when not needed Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v4,07/11] staging: vchiq: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v4,06/11] soc: bcm: raspberrypi-power: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v4,05/11] reset: raspberrypi: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v4,04/11] gpio: raspberrypi-exp: Release firmware handle on unbind Raspberry Pi PoE HAT fan support 1 - - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v4,03/11] clk: bcm: rpi: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v4,02/11] firmware: raspberrypi: Introduce devm_rpi_firmware_get() Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v4,01/11] firmware: raspberrypi: Keep count of all consumers Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-12 Nicolas Saenz Julienne New
[v3,11/11] pwm: Add Raspberry Pi Firmware based PWM bus Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v3,10/11] DO NOT MERGE: ARM: dts: Add RPi's official PoE hat support Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v3,09/11] dt-bindings: pwm: Add binding for RPi firmware PWM bus Raspberry Pi PoE HAT fan support - 1 - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v3,08/11] firmware: raspberrypi: Get rid of rpi_firmware_get() Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v3,07/11] input: raspberrypi-ts: Release firmware handle when not needed Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v3,06/11] staging: vchiq: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v3,05/11] soc: bcm: raspberrypi-power: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v3,04/11] reset: raspberrypi: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v3,03/11] gpio: raspberrypi-exp: Release firmware handle on unbind Raspberry Pi PoE HAT fan support 1 - - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v3,02/11] clk: bcm: rpi: Release firmware handle on unbind Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v3,01/11] firmware: raspberrypi: Introduce devm_rpi_firmware_get() Raspberry Pi PoE HAT fan support - - - 0 0 0 2020-11-04 Nicolas Saenz Julienne New
[v6,7/7] mm: Remove examples from enum zone_type comment arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-11-03 Nicolas Saenz Julienne New
[v6,6/7] arm64: mm: Set ZONE_DMA size based on early IORT scan arm64: Default to 32-bit wide ZONE_DMA 2 - 1 0 0 0 2020-11-03 Nicolas Saenz Julienne New
[v6,5/7] arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges arm64: Default to 32-bit wide ZONE_DMA - - - 0 0 0 2020-11-03 Nicolas Saenz Julienne New
[v6,4/7] of: unittest: Add test for of_dma_get_max_cpu_address() arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-11-03 Nicolas Saenz Julienne New
[v6,3/7] of/address: Introduce of_dma_get_max_cpu_address() arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-11-03 Nicolas Saenz Julienne New
[v6,2/7] arm64: mm: Move zone_dma_bits initialization into zone_sizes_init() arm64: Default to 32-bit wide ZONE_DMA - - 1 0 0 0 2020-11-03 Nicolas Saenz Julienne New
[v6,1/7] arm64: mm: Move reserve_crashkernel() into mem_init() arm64: Default to 32-bit wide ZONE_DMA - - 1 0 0 0 2020-11-03 Nicolas Saenz Julienne New
[v5,7/7] mm: Remove examples from enum zone_type comment arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-10-29 Nicolas Saenz Julienne New
[v5,6/7] arm64: mm: Set ZONE_DMA size based on early IORT scan arm64: Default to 32-bit wide ZONE_DMA 2 - 1 0 0 0 2020-10-29 Nicolas Saenz Julienne New
[v5,5/7] arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges arm64: Default to 32-bit wide ZONE_DMA - - - 0 0 0 2020-10-29 Nicolas Saenz Julienne New
[v5,4/7] of: unittest: Add test for of_dma_get_max_cpu_address() arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-10-29 Nicolas Saenz Julienne New
[v5,3/7] of/address: Introduce of_dma_get_max_cpu_address() arm64: Default to 32-bit wide ZONE_DMA - 1 - 0 0 0 2020-10-29 Nicolas Saenz Julienne New
[v5,2/7] arm64: mm: Move zone_dma_bits initialization into zone_sizes_init() arm64: Default to 32-bit wide ZONE_DMA - - 1 0 0 0 2020-10-29 Nicolas Saenz Julienne New
[v5,1/7] arm64: mm: Move reserve_crashkernel() into mem_init() arm64: Default to 32-bit wide ZONE_DMA - - 1 0 0 0 2020-10-29 Nicolas Saenz Julienne New
[v4,2/2] dma-pool: fix coherent pool allocations for IOMMU mappings dma-pool fixes - - - 0 0 0 2020-08-14 Nicolas Saenz Julienne Accepted
[v4,1/2] dma-pool: Only allocate from CMA when in same memory zone dma-pool fixes - - - 0 0 0 2020-08-14 Nicolas Saenz Julienne Accepted
[v3,2/2] dma-pool: Only allocate from CMA when in same memory zone dma-pool fixes - - - 0 0 0 2020-08-06 Nicolas Saenz Julienne Superseded
[v3,1/2] dma-pool: fix coherent pool allocations for IOMMU mappings dma-pool fixes - - - 0 0 0 2020-08-06 Nicolas Saenz Julienne Superseded
[v2,2/2] dma-pool: Only allocate from CMA when in same memory zone dma-pool fixes - - - 0 0 0 2020-08-03 Nicolas Saenz Julienne Superseded
[v2,1/2] dma-pool: fix coherent pool allocations for IOMMU mappings dma-pool fixes - - - 0 0 0 2020-08-03 Nicolas Saenz Julienne Superseded
of: unittest: Use bigger address cells to catch parser regressions of: unittest: Use bigger address cells to catch parser regressions - - - 0 0 0 2020-08-03 Nicolas Saenz Julienne Accepted
of: address: Fix parser address/size cells initialization of: address: Fix parser address/size cells initialization 1 - - 0 0 0 2020-07-31 Nicolas Saenz Julienne Accepted
[v2] clk: bcm2835: Do not use prediv with bcm2711's PLLs [v2] clk: bcm2835: Do not use prediv with bcm2711's PLLs - 1 1 0 0 0 2020-07-30 Nicolas Saenz Julienne Accepted
clk: bcm2835: Do not use prediv with bcm2711's PLLs clk: bcm2835: Do not use prediv with bcm2711's PLLs - - - 0 0 0 2020-07-30 Nicolas Saenz Julienne Superseded
[v2] brcmfmac: Set timeout value when configuring power save [v2] brcmfmac: Set timeout value when configuring power save - - - 0 0 0 2020-07-21 Nicolas Saenz Julienne Accepted
[v2,4/4] dma-pool: Make sure atomic pool suits device dma-pool: Fix atomic pool selection - - - 0 0 0 2020-07-14 Nicolas Saenz Julienne Accepted
[v2,3/4] dma-pool: Introduce dma_guess_pool() dma-pool: Fix atomic pool selection - - - 0 0 0 2020-07-14 Nicolas Saenz Julienne Accepted
[v2,2/4] dma-pool: Get rid of dma_in_atomic_pool() dma-pool: Fix atomic pool selection - - - 0 0 0 2020-07-14 Nicolas Saenz Julienne Accepted
[v2,1/4] dma-direct: Provide function to check physical memory area validity dma-pool: Fix atomic pool selection - - - 0 0 0 2020-07-14 Nicolas Saenz Julienne Accepted
dma-pool: Do not allocate pool memory from CMA dma-pool: Do not allocate pool memory from CMA 1 - 1 0 0 0 2020-07-08 Nicolas Saenz Julienne Accepted
spi: bcm2835: Enable shared interrupt support spi: bcm2835: Enable shared interrupt support 1 - 1 0 0 0 2020-05-28 Nicolas Saenz Julienne Accepted
MAINTAINERS: Update Raspberry Pi development repository MAINTAINERS: Update Raspberry Pi development repository 1 - - 0 0 0 2020-05-11 Nicolas Saenz Julienne Accepted
PCI: brcmstb: Assert fundamental reset on initialization PCI: brcmstb: Assert fundamental reset on initialization 1 - - 0 0 0 2020-05-07 Nicolas Saenz Julienne Accepted
[v8,4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk USB: pci-quirks: Add Raspberry Pi 4 quirk 1 1 - 0 0 0 2020-05-05 Nicolas Saenz Julienne Accepted
[v8,3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present USB: pci-quirks: Add Raspberry Pi 4 quirk - 2 - 0 0 0 2020-05-05 Nicolas Saenz Julienne Accepted
[v8,2/4] firmware: raspberrypi: Introduce vl805 init routine USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 2 0 0 0 2020-05-05 Nicolas Saenz Julienne Accepted
[v8,1/4] soc: bcm2835: Add notify xHCI reset property USB: pci-quirks: Add Raspberry Pi 4 quirk - 2 - 0 0 0 2020-05-05 Nicolas Saenz Julienne Accepted
[v7,4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk USB: pci-quirks: Add Raspberry Pi 4 quirk - - - 0 0 0 2020-04-29 Nicolas Saenz Julienne Superseded
[v7,3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 - 0 0 0 2020-04-29 Nicolas Saenz Julienne Superseded
[v7,2/4] firmware: raspberrypi: Introduce vl805 init routine USB: pci-quirks: Add Raspberry Pi 4 quirk - - - 0 0 0 2020-04-29 Nicolas Saenz Julienne Superseded
[v7,1/4] soc: bcm2835: Add notify xHCI reset property USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 - 0 0 0 2020-04-29 Nicolas Saenz Julienne Superseded
[v3,2/2] of: property: Do not link to disabled devices of: property: fw_devlink misc fixes - 1 - 0 0 0 2020-04-20 Nicolas Saenz Julienne Accepted
[v3,1/2] of: property: Fix create device links for all child-supplier dependencies of: property: fw_devlink misc fixes - 1 - 0 0 0 2020-04-20 Nicolas Saenz Julienne Accepted
[v2,2/2] of: property: Do not link to disabled devices of: property: fw_devlink misc fixes - - - 0 0 0 2020-04-17 Nicolas Saenz Julienne Superseded
[v2,1/2] of: property: Fix create device links for all child-supplier dependencies of: property: fw_devlink misc fixes - 1 - 0 0 0 2020-04-17 Nicolas Saenz Julienne Superseded
[4/4] of: property: Avoid linking devices with circular dependencies of: property: fw_devlink misc fixes - - - 0 0 0 2020-04-15 Nicolas Saenz Julienne Superseded
[3/4] of: property: Move of_link_to_phandle() of: property: fw_devlink misc fixes - - - 0 0 0 2020-04-15 Nicolas Saenz Julienne Superseded
[2/4] of: property: Do not link to disabled devices of: property: fw_devlink misc fixes - - - 0 0 0 2020-04-15 Nicolas Saenz Julienne Superseded
[1/4] of: property: Fix create device links for all child-supplier dependencies of: property: fw_devlink misc fixes - 1 - 0 0 0 2020-04-15 Nicolas Saenz Julienne Superseded
ARM: dts: bcm283x: Disable dsi0 node ARM: dts: bcm283x: Disable dsi0 node - 1 - 0 0 0 2020-04-15 Nicolas Saenz Julienne Accepted
ARM: bcm2835_defconfig: Enable fixed-regulator ARM: bcm2835_defconfig: Enable fixed-regulator - - - 0 0 0 2020-03-26 Nicolas Saenz Julienne Accepted
ARM: dts: bcm283x: Add cells encoding format to firmware bus ARM: dts: bcm283x: Add cells encoding format to firmware bus - 1 - 0 0 0 2020-03-26 Nicolas Saenz Julienne Accepted
drm/vc4: Fix HDMI mode validation drm/vc4: Fix HDMI mode validation - 1 1 0 0 0 2020-03-26 Nicolas Saenz Julienne Accepted
ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations - - - 0 0 0 2020-03-19 Nicolas Saenz Julienne Accepted
[v4,4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk USB: pci-quirks: Add Raspberry Pi 4 quirk - - - 0 0 0 2020-03-06 Nicolas Saenz Julienne Superseded
[v4,3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 - 0 0 0 2020-03-06 Nicolas Saenz Julienne Superseded
[v4,2/4] firmware: raspberrypi: Introduce vl805 init routine USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 - 0 0 0 2020-03-06 Nicolas Saenz Julienne Superseded
[v4,1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream USB: pci-quirks: Add Raspberry Pi 4 quirk - 1 - 0 0 0 2020-03-06 Nicolas Saenz Julienne Superseded
ARM: dts: bcm283x: Use firmware PM driver for V3D ARM: dts: bcm283x: Use firmware PM driver for V3D - - 1 0 0 0 2020-03-03 Nicolas Saenz Julienne Accepted
« 1 2 3 »