Show patches with: Submitter = Zhou Yanjie       |    State = Action Required       |   79 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[1/2] dt-bindings: DMA: Add X1000 bindings. [1/2] dt-bindings: DMA: Add X1000 bindings. - - - 0 0 0 2019-10-23 Zhou Yanjie New
[1/2] dt-bindings: MIPS: Add doc about Ingenic CPU node. [1/2] dt-bindings: MIPS: Add doc about Ingenic CPU node. - - - 0 0 0 2019-01-30 Zhou Yanjie New
[1/2] Serial: Ingenic: Add support for the X1000. [1/2] Serial: Ingenic: Add support for the X1000. - - - 0 0 0 2019-01-28 Zhou Yanjie New
[1/2,v3] MIPS: Ingenic: Fix bugs when detecting X1000's L2 cache. [1/2,v3] MIPS: Ingenic: Fix bugs when detecting X1000's L2 cache. - - - 0 0 0 2019-08-01 Zhou Yanjie New
[1/2,v3] MIPS: Rename JZRISC to XBurst. [1/2,v3] MIPS: Rename JZRISC to XBurst. - - - 0 0 0 2019-11-19 Zhou Yanjie New
[1/2,v4] MIPS: Ingenic: Fix bugs when detecting X1000's L2 cache. [1/2,v4] MIPS: Ingenic: Fix bugs when detecting X1000's L2 cache. - - - 0 0 0 2019-08-02 Zhou Yanjie New
[1/3] RTC: Ingenic: Add support for the X1000. [1/3] RTC: Ingenic: Add support for the X1000. - - - 0 0 0 2019-01-28 Zhou Yanjie New
[1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. [1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-01-26 Zhou Yanjie New
[1/4] MMC: Ingenic: Adjust the macro definition name. [1/4] MMC: Ingenic: Adjust the macro definition name. - - - 0 0 0 2019-09-05 Zhou Yanjie New
[1/4,v4] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. [1/4,v4] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-28 Zhou Yanjie New
[1/5] clk: Ingenic: Adjust code to make it compatible with X1830. [1/5] clk: Ingenic: Adjust code to make it compatible with X1830. - - - 0 0 0 2019-11-27 Zhou Yanjie New
[2/2] DMA: JZ4780: Add support for the X1000. [1/2] dt-bindings: DMA: Add X1000 bindings. - - - 0 0 0 2019-10-23 Zhou Yanjie New
[2/2] DTS: CI20: Add CPU nodes and L2 cache nodes. [1/2] dt-bindings: MIPS: Add doc about Ingenic CPU node. - - - 0 0 0 2019-01-30 Zhou Yanjie New
[2/2] Serial: Ingenic: Add support for the X1000. [1/2] Serial: Ingenic: Add support for the X1000. - - - 0 0 0 2019-01-28 Zhou Yanjie New
[2/2,v3] MIPS: Ingenic: Disable abandoned HPTLB function. [1/2,v3] MIPS: Rename JZRISC to XBurst. 1 - - 0 0 0 2019-11-19 Zhou Yanjie New
[2/2,v3] MIPS: Ingenic: Fix bugs when calculate bogomips/lpj. [1/2,v3] MIPS: Ingenic: Fix bugs when detecting X1000's L2 cache. - - - 0 0 0 2019-08-01 Zhou Yanjie New
[2/2,v4] MIPS: Ingenic: Disable broken BTB lookup optimization. [1/2,v4] MIPS: Ingenic: Fix bugs when detecting X1000's L2 cache. - - - 0 0 0 2019-08-02 Zhou Yanjie New
[2/3] Dt-bindings: RTC: Add X1000 RTC bindings. [1/3] RTC: Ingenic: Add support for the X1000. - - - 0 0 0 2019-01-28 Zhou Yanjie New
[2/4] Irqchip: Ingenic: Unify the function name prefix to "ingenic_intc_". [1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-01-26 Zhou Yanjie New
[2/4] MMC: Ingenic: Add 8bit mode support. [1/4] MMC: Ingenic: Adjust the macro definition name. - - - 0 0 0 2019-09-05 Zhou Yanjie New
[2/4,v4] irqchip: Ingenic: Unify the function name prefix to "ingenic_intc_". [1/4,v4] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-28 Zhou Yanjie New
[2/5] dt-bindings: clock: Add X1830 bindings. [1/5] clk: Ingenic: Adjust code to make it compatible with X1830. - 1 - 0 0 0 2019-11-27 Zhou Yanjie New
[3/3] RTC: Ingenic: Replace jz47xx with XBurst. [1/3] RTC: Ingenic: Add support for the X1000. - - - 0 0 0 2019-01-28 Zhou Yanjie New
[3/4] dt-bindings: MMC: Add JZ4760 bindings. [1/4] MMC: Ingenic: Adjust the macro definition name. 1 - - 0 0 0 2019-09-05 Zhou Yanjie New
[3/4] Irqchip: Ingenic: Add support for the X1000. [1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-01-26 Zhou Yanjie New
[3/4,v4] dt-bindings: interrupt-controller: Add new Ingenic Socs bindings. [1/4,v4] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-28 Zhou Yanjie New
[3/5] clk: Ingenic: Add CGU driver for X1830. [1/5] clk: Ingenic: Adjust code to make it compatible with X1830. - - - 0 0 0 2019-11-27 Zhou Yanjie New
[4/4] Irqchip: Ingenic: Add support for the X1000. [1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-01-26 Zhou Yanjie New
[4/4] MMC: Ingenic: Add support for JZ4760 and support for LPM. [1/4] MMC: Ingenic: Adjust the macro definition name. - - - 0 0 0 2019-09-05 Zhou Yanjie New
[4/4,v4] irqchip: Ingenic: Add support for new Ingenic Socs. [1/4,v4] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-28 Zhou Yanjie New
[4/5] dt-bindings: clock: Add USB OTG clock for X1000. [1/5] clk: Ingenic: Adjust code to make it compatible with X1830. - - - 0 0 0 2019-11-27 Zhou Yanjie New
[5/5] clk: Ingenic: Add USB OTG clock for X1000. [1/5] clk: Ingenic: Adjust code to make it compatible with X1830. - - - 0 0 0 2019-11-27 Zhou Yanjie New
MIPS: Ingenic: Fix bugs when detecting X1000's parameters. MIPS: Ingenic: Fix bugs when detecting X1000's parameters. - - - 0 0 0 2019-07-30 Zhou Yanjie New
MIPS: X1830: Add X1830 system type. MIPS: X1830: Add X1830 system type. - - - 0 0 0 2019-11-26 Zhou Yanjie New
[RESEND,1/4] Pinctrl: Ingenic: Fix bugs caused by differences between JZ4770 and JZ4780. [RESEND,1/4] Pinctrl: Ingenic: Fix bugs caused by differences between JZ4770 and JZ4780. - - - 0 0 0 2019-01-25 Zhou Yanjie New
[RESEND,2/4] Pinctrl: Ingenic: Add missing parts for JZ4770 and JZ4780. [RESEND,1/4] Pinctrl: Ingenic: Fix bugs caused by differences between JZ4770 and JZ4780. - - - 0 0 0 2019-01-25 Zhou Yanjie New
[RESEND,3/4] Pinctrl: Ingenic: Unify the function name prefix to "ingenic_gpio_". [RESEND,1/4] Pinctrl: Ingenic: Fix bugs caused by differences between JZ4770 and JZ4780. - - - 0 0 0 2019-01-25 Zhou Yanjie New
[RESEND,4/4] Pinctrl: Ingenic: Fix const declaration. [RESEND,1/4] Pinctrl: Ingenic: Fix bugs caused by differences between JZ4770 and JZ4780. - - - 0 0 0 2019-01-25 Zhou Yanjie New
[v2,1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. [v2,1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-01-27 Zhou Yanjie New
[v2,1/4] MIPS: Ingenic: initial X1000 support. [v2,1/4] MIPS: Ingenic: initial X1000 support. - - - 0 0 0 2019-11-23 Zhou Yanjie New
[v2,2/4] dt-bindings: Document yna vendor-prefix. [v2,1/4] MIPS: Ingenic: initial X1000 support. - - - 0 0 0 2019-11-23 Zhou Yanjie New
[v2,2/4] Irqchip: Ingenic: Unify the function name prefix to "ingenic_intc_". [v2,1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-01-27 Zhou Yanjie New
[v2,3/4] dt-bindings: MIPS: Add Ingenic XBurst based boards. [v2,1/4] MIPS: Ingenic: initial X1000 support. - - - 0 0 0 2019-11-23 Zhou Yanjie New
[v2,3/4] Irqchip: Ingenic: Add support for the X1000. [v2,1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-01-27 Zhou Yanjie New
[v2,4/4] Irqchip: Ingenic: Add support for the X1000. [v2,1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - 1 - 0 0 0 2019-01-27 Zhou Yanjie New
[v2,4/4] MIPS: Ingenic: Initial YSH & ATIL CU Neo board. support. [v2,1/4] MIPS: Ingenic: initial X1000 support. - - - 0 0 0 2019-11-23 Zhou Yanjie New
[v2] MIPS: Ingenic: Fix bugs when detecting X1000's parameters. [v2] MIPS: Ingenic: Fix bugs when detecting X1000's parameters. - - - 0 0 0 2019-07-31 Zhou Yanjie New
[v3,1/8] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. [v3,1/8] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-15 Zhou Yanjie New
[v3,2/8] irqchip: Ingenic: Unify the function name prefix to "ingenic_intc_". [v3,1/8] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-15 Zhou Yanjie New
[v3,3/8] dt-bindings: interrupt-controller: Add JZ4760 and JZ4760B bindings. [v3,1/8] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-15 Zhou Yanjie New
[v3,4/8] irqchip: Ingenic: Add support for JZ4760 and JZ4760B. [v3,1/8] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-15 Zhou Yanjie New
[v3,5/8] dt-bindings: interrupt-controller: Add X1000 and X1000E bindings. [v3,1/8] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-15 Zhou Yanjie New
[v3,6/8] irqchip: Ingenic: Add support for X1000 and X1000E. [v3,1/8] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-15 Zhou Yanjie New
[v3,7/8] dt-bindings: interrupt-controller: Add X1500 bindings. [v3,1/8] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-15 Zhou Yanjie New
[v3,8/8] irqchip: Ingenic: Add support for X1500. [v3,1/8] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq. - - - 0 0 0 2019-07-15 Zhou Yanjie New
[v5,01/10] MIPS: Ingenic: Initial X1000 support. [v5,01/10] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-28 Zhou Yanjie New
[v5,02/10] dt-bindings: Document yna vendor-prefix. [v5,01/10] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-28 Zhou Yanjie New
[v5,03/10] dt-bindings: MIPS: Add Ingenic XBurst based boards. [v5,01/10] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-28 Zhou Yanjie New
[v5,04/10] MIPS: Ingenic: Initial YSH & ATIL CU Neo board support. [v5,01/10] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-28 Zhou Yanjie New
[v5,05/10] MIPS: X1000: Add pdma controller DT node. [v5,01/10] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-28 Zhou Yanjie New
[v5,06/10] MIPS: CU1000: Update defconfig for pdma controller. [v5,01/10] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-28 Zhou Yanjie New
[v5,07/10] MIPS: X1000: Add msc controller DT node. [v5,01/10] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-28 Zhou Yanjie New
[v5,08/10] MIPS: CU1000: Update defconfig for msc controller. [v5,01/10] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-28 Zhou Yanjie New
[v5,09/10] MIPS: X1000: Add rtc DT node. [v5,01/10] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-28 Zhou Yanjie New
[v5,10/10] MIPS: CU1000: Update defconfig for rtc. [v5,01/10] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-28 Zhou Yanjie New
[v6,01/12] MIPS: Ingenic: Initial X1000 support. [v6,01/12] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-29 Zhou Yanjie New
[v6,02/12] dt-bindings: Document yna vendor-prefix. [v6,01/12] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-29 Zhou Yanjie New
[v6,03/12] dt-bindings: MIPS: Add Ingenic XBurst based boards. [v6,01/12] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-29 Zhou Yanjie New
[v6,04/12] MIPS: Ingenic: Initial YSH & ATIL CU Neo board support. [v6,01/12] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-29 Zhou Yanjie New
[v6,05/12] MIPS: X1000: Add pdma controller DT node. [v6,01/12] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-29 Zhou Yanjie New
[v6,06/12] MIPS: CU1000: Update defconfig for pdma controller. [v6,01/12] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-29 Zhou Yanjie New
[v6,07/12] MIPS: X1000: Add msc controller DT node. [v6,01/12] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-29 Zhou Yanjie New
[v6,08/12] MIPS: CU1000: Update defconfig for msc controller. [v6,01/12] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-29 Zhou Yanjie New
[v6,09/12] MIPS: X1000: Add rtc DT node. [v6,01/12] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-29 Zhou Yanjie New
[v6,10/12] MIPS: CU1000: Update defconfig for rtc. [v6,01/12] MIPS: Ingenic: Initial X1000 support. - - - 0 0 0 2019-11-29 Zhou Yanjie New
[v6,1/4] pinctrl: Ingenic: Fix bugs in X1000 and X1500. [v6,1/4] pinctrl: Ingenic: Fix bugs in X1000 and X1500. - - - 0 0 0 2019-11-26 Zhou Yanjie New
[v6,2/4] pinctrl: Ingenic: Add missing parts for X1000 and X1500. [v6,1/4] pinctrl: Ingenic: Fix bugs in X1000 and X1500. - - - 0 0 0 2019-11-26 Zhou Yanjie New
[v6,3/4] dt-bindings: pinctrl: Add bindings for Ingenic X1830. [v6,1/4] pinctrl: Ingenic: Fix bugs in X1000 and X1500. 1 - - 0 0 0 2019-11-26 Zhou Yanjie New
[v6,4/4] pinctrl: Ingenic: Add pinctrl driver for X1830. [v6,1/4] pinctrl: Ingenic: Fix bugs in X1000 and X1500. - - - 0 0 0 2019-11-26 Zhou Yanjie New