Phone-Devel Archive on lore.kernel.org.
 help / color / Atom feed
[PATCH v6 1/2] dt-bindings: input/touchscreen: add bindings for msg2638
 2021-04-09 22:17 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH v6 2/2] Input: add MStar MSG2638 touchscreen driver

[PATCH v2 3/3] dt-bindings: qcom: geni-se: document iommus
 2021-04-09 18:51 UTC  (2+ messages) - mbox.gz / Atom

[PATCH 0/3] drm/msm/mdp5: Emit vsync signal often enough
 2021-04-09  8:22 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH 1/3] drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal
  ` [Freedreno] "
` [PATCH 2/3] drm/msm/mdp5: Do not multiply vclk line count by 100
` [PATCH 3/3] drm/msm/mdp5: Disable pingpong autorefresh at tearcheck init

[PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes
 2021-04-08 16:21 UTC  - mbox.gz / Atom

[PATCH v2 1/3] arm64: dts: qcom: sm8150: add other QUP nodes and iommus
 2021-04-08 16:21 UTC  - mbox.gz / Atom

v3: arm64: dts: sm8150: start populating qups
 2021-04-08 16:20 UTC  - mbox.gz / Atom

[RESEND PATCH] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add audio support
 2021-04-07 20:13 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] gnss: motmdm: Add support for Motorola Mapphone MDM6600 modem
 2021-04-07 10:52 UTC  (5+ messages) - mbox.gz / Atom
` [PATCHv2] "

OnePlus 5/5T support
 2021-04-06  1:07 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v2 1/2] arm64: dts: qcom: Add support for OnePlus 5/5T
` [PATCH 2/2] arm64: dts: qcom: msm8998: Disable MSS remoteproc by default

[PATCH v4] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add DSI and panel bits
 2021-04-04 19:44 UTC  - mbox.gz / Atom

[PATCH v3] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add DSI and panel bits
 2021-04-04 19:38 UTC  (3+ messages) - mbox.gz / Atom

[PATCH RESEND] arm64: dts: qcom: Add support for OnePlus 5/5T
 2021-04-04 17:53 UTC  (3+ messages) - mbox.gz / Atom

[PATCH 1/6] clk: qcom: gcc-sdm660: Fix hmss_gpll0_clk_src parent_map
 2021-04-01 21:10 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH 5/6] clk: qcom: gcc-sdm660: Account for needed adjustments in probe function

[PATCH 1/2] dt-bindings: clock: qcom,gcc: Document MSM8976 compatibles
 2021-04-01  2:00 UTC  (3+ messages) - mbox.gz / Atom
  ` [PATCH 2/2] clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver

[PATCH] ASoC: audio-graph-card: Add audio mixer for Motorola mdm6600
 2021-03-28 22:17 UTC  (2+ messages) - mbox.gz / Atom

(No Subject)
 2021-03-27 16:40 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH v2 1/3] arm64: dts: qcom: sm8150: add other QUP nodes and iommus
` [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes
` [PATCH v2 3/3] dt-bindings: qcom: geni-se: document iommus

[PATCH 1/2] dt-bindings: clock: Add MDM9607 GCC clock bindings
 2021-03-24 17:08 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH 2/2] clk: qcom: Add MDM9607 GCC driver

[PATCH 1/2] dt-bindings: leds: backlight: qcom-wled: Add PMI8994 compatible
 2021-03-24  9:14 UTC  (11+ messages) - mbox.gz / Atom
` [PATCH 2/2] video: "

[PATCH V5 0/2] Fix WLED FSC Sync and brightness Sync settings
 2021-03-23  9:40 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH V5 1/2] backlight: qcom-wled: Fix FSC update issue for WLED5
` [PATCH V5 2/2] backlight: qcom-wled: Correct the sync_toggle sequence

arm64: dts: sm8150: start populating qups
 2021-03-22  6:01 UTC  (11+ messages) - mbox.gz / Atom
` [PATCH 1/3] arm64: dts: qcom: sm8150: add other QUP nodes
` [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups
` [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes

[PATCH v3] thermal: qcom: tsens-v0_1: Add support for MDM9607
 2021-03-17 22:38 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] thermal: qcom: tsens_v1: Enable sensor 3 on MSM8976
 2021-03-17 18:23 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] backlight: qcom-wled: Use sink_addr for sync toggle
 2021-03-17  9:16 UTC  (4+ messages) - mbox.gz / Atom

[PATCH 0/3] Librem 5 phone dts fixes
 2021-03-17  7:59 UTC  (10+ messages) - mbox.gz / Atom
` [PATCH 1/3] arm64: dts: imx8mq-librem5: Hog the correct gpio
` [PATCH 2/3] arm64: dts: imx8mq-librem5-r3: Mark buck3 as always on
` [PATCH 3/3] arm64: defconfig: Enable the Hantro decoder
` [PATCH v2 0/3] Librem 5 phone dts fixes
  ` [PATCH v2 1/3] arm64: dts: imx8mq-librem5: Hog the correct gpio
  ` [PATCH v2 2/3] arm64: dts: imx8mq-librem5-r3: Mark buck3 as always on
  ` [PATCH v2 3/3] arm64: defconfig: Enable the Hantro decoder

[PATCH] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add audio support
 2021-03-14 18:11 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] clk: qcom: rcg2: Rectify clk_gfx3d rate rounding without mux division
 2021-03-13 20:59 UTC  (2+ messages) - mbox.gz / Atom

[PATCH 1/2] pinctrl: pmic-mpp: Add missing dt-bindings mpp function defs
 2021-03-11  0:03 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH 2/2] iio: qcom-spmi-vadc: Add definitions for USB DP/DM VADCs

[PATCH 00/41] SDM630/636/660/Nile&Ganges DT feature enablement
 2021-03-08 23:07 UTC  (48+ messages) - mbox.gz / Atom
` [PATCH 03/41] arm64: dts: qcom: sdm630: Add MMCC node
` [PATCH 04/41] arm64: dts: qcom: sdm630: Add interconnect provider nodes
` [PATCH 05/41] arm64: dts: qcom: sdm630: Add MDSS nodes
` [PATCH 06/41] arm64: dts: qcom: sdm630: Fix intc reg indentation
` [PATCH 07/41] arm64: dts: qcom: sdm630: Add qfprom subnodes
` [PATCH 08/41] arm64: dts: qcom: sdm630: Add USB configuration
` [PATCH 09/41] arm64: dts: qcom: sdm630: Fix TLMM node and pinctrl configuration
` [PATCH 10/41] arm64: dts: qcom: sdm630: Add SDHCI2 node
` [PATCH 11/41] arm64: dts: qcom: sdm630: Add interconnect and opp table to sdhc_1
` [PATCH 12/41] arm64: dts: qcom: sdm630: Add GPU Clock Controller node
` [PATCH 13/41] arm64: dts: qcom: sdm630: Add clocks and power domains to SMMU nodes
` [PATCH 14/41] arm64: dts: qcom: sdm630: Add qcom,adreno-smmu compatible
` [PATCH 15/41] arm64: dts: qcom: sdm630: Add TSENS node
` [PATCH 16/41] arm64: dts: qcom: sdm630: Add modem/ADSP SMP2P nodes
` [PATCH 17/41] arm64: dts: qcom: sdm630: Add thermal-zones configuration
` [PATCH 18/41] arm64: dts: qcom: sdm630: Add ADSP remoteproc configuration
` [PATCH 19/41] arm64: dts: qcom: sdm630: Raise tcsr_mutex_regs size
` [PATCH 20/41] arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration
` [PATCH 21/41] arm64: dts: qcom: pm660: Support SPMI regulators on PMIC sid 1
` [PATCH 22/41] arm64: dts: qcom: pm660l: Add WLED support
` [PATCH 23/41] arm64: dts: qcom: pm660l: Support SPMI regulators on PMIC sid 3
` [PATCH 24/41] arm64: dts: qcom: pm660(l): Add VADC and temp alarm nodes
` [PATCH 25/41] arm64: dts: qcom: sdm660: Make the DTS an overlay on top of 630
` [PATCH 26/41] arm64: dts: qcom: Add device tree for SDM636
` [PATCH 27/41] arm64: dts: qcom: sdm630: Add IMEM node
` [PATCH 28/41] arm64: dts: qcom: sdm630: Configure the camera subsystem
` [PATCH 29/41] arm64: dts: qcom: sdm660: Add required nodes for DSI1
` [PATCH 30/41] arm64: dts: qcom: sdm630-xperia-nile: Add all RPM and fixed regulators
` [PATCH 31/41] arm64: dts: qcom: sdm630-nile: Use &labels
` [PATCH 32/41] arm64: dts: qcom: sdm630-nile: Add USB
` [PATCH 33/41] arm64: dts: qcom: sdm630-nile: Add Volume up key
` [PATCH 34/41] arm64: dts: qcom: sdm630-nile: Configure WCN3990 Bluetooth
` [PATCH 35/41] arm64: dts: qcom: sdm630-xperia: Retire sdm630-sony-xperia-ganges.dtsi
` [PATCH 36/41] arm64: dts: qcom: sdm630-nile: Add Synaptics touchscreen
` [PATCH 37/41] arm64: dts: qcom: sdm630-nile: Specify ADSP firmware name
` [PATCH 38/41] arm64: dts: qcom: sdm630-nile: Enable uSD card slot
` [PATCH 39/41] arm64: dts: qcom: sdm630-nile: Remove gpio-keys autorepeat
` [PATCH 40/41] arm64: dts: qcom: sdm630: Add I2C functions to I2C pins
` [PATCH 41/41] arm64: dts: qcom: sdm630: Add DMA to I2C hosts

[PATCH v2] input: s6sy761: fix coordinate read bit shift
 2021-03-07 23:13 UTC  (3+ messages) - mbox.gz / Atom

[PATCH] brcmfmac: Add support for BCM43596 PCIe Wi-Fi
 2021-03-07 11:35 UTC  - mbox.gz / Atom

[PATCH] arm64: dts: add support for the Pixel 2 XL
 2021-03-06 18:31 UTC  (5+ messages) - mbox.gz / Atom

[PATCH v1 0/7] Add support for IPA v3.1, GSI v1.0, MSM8998 IPA
 2021-03-05 19:33 UTC  (18+ messages) - mbox.gz / Atom
` [PATCH v1 1/7] net: ipa: Add support for IPA v3.1 with GSI v1.0
` [PATCH v1 2/7] net: ipa: endpoint: Don't read unexistant register on IPAv3.1
` [PATCH v1 3/7] net: ipa: gsi: Avoid some writes during irq setup for older IPA
` [PATCH v1 4/7] net: ipa: gsi: Use right masks for GSI v1.0 channels hw param
` [PATCH v1 5/7] net: ipa: Add support for IPA on MSM8998
` [PATCH v1 6/7] dt-bindings: net: qcom-ipa: Document qcom,sc7180-ipa compatible
` [PATCH v1 7/7] dt-bindings: net: qcom-ipa: Document qcom,msm8998-ipa compatible

[PATCH] input: s6sy761: fix coordinate read bit shift
 2021-03-05 17:54 UTC  (3+ messages) - mbox.gz / Atom

[PATCH] arm64: dts: qcom: msm8996: Add usb3 interrupts
 2021-03-03 20:40 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v5 1/2] dt-bindings: input/touchscreen: add bindings for msg2638
 2021-03-02  9:00 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v5 2/2] Input: add MStar MSG2638 touchscreen driver

[PATCH] qcom: spmi-regulator: Add support for ULT LV_P50 and ULT P300
 2021-03-01 23:37 UTC  (4+ messages) - mbox.gz / Atom

[PATCH V3 0/2] Fix WLED FSC Sync and brightness Sync settings
 2021-03-01 16:42 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH V3 1/2] backlight: qcom-wled: Fix FSC update issue for WLED5
` [PATCH V3 2/2] backlight: qcom-wled: Correct the sync_toggle sequence

[PATCH V4 0/2] Fix WLED FSC Sync and brightness Sync settings
 2021-03-01 16:10 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH V4 1/2] backlight: qcom-wled: Fix FSC update issue for WLED5
` [PATCH V4 2/2] backlight: qcom-wled: Correct the sync_toggle sequence

[PATCH V2 0/2] Fix WLED FSC Sync and brightness Sync settings
 2021-03-01  9:39 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH V2 2/2] backlight: qcom-wled: Correct the sync_toggle sequence

[PATCH 01/11] arm64: dts: qcom: msm8996: Sanitize pins
 2021-02-28 13:08 UTC  (11+ messages) - mbox.gz / Atom
` [PATCH 02/11] arm64: dts: qcom: msm8996-*: Clean up QUP and UART names
` [PATCH 03/11] arm64: dts: qcom: msm8996: Enlarge tcsr_mutex_regs size
` [PATCH 04/11] arm64: dts: qcom: msm8996: Add SDHCI1
` [PATCH 05/11] arm64: dts: qcom: msm8996: Add BLSP2_I2C5 and BLSP2_I2C6
` [PATCH 06/11] arm64: dts: qcom: msm8996: Disable MDSS and Adreno by default
` [PATCH 07/11] arm64: dts: qcom: msm8996: Disable Venus "
` [PATCH 08/11] arm64: dts: qcom: pm8994: Add RESIN node
` [PATCH 09/11] arm64: dts: qcom: msm8996: Add DSI0 nodes
` [PATCH 10/11] arm64: dts: qcom: pmi8994: Add WLED node
` [PATCH 11/11] arm64: dts: qcom: msm8996: Clean up the SDHCI2 node

[PATCH] drm/msm/dsi: Uncomment core_mmss clock for MSM8996
 2021-02-28 12:43 UTC  - mbox.gz / Atom

[PATCH] drm/msm/adreno: a5xx_power: Don't apply A540 lm_setup to other GPUs
 2021-02-28 12:36 UTC  - mbox.gz / Atom

[PATCH] arm64: dts: qcom: Add support for OnePlus 5/5T
 2021-02-26 21:41 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v4] Add support for the OnePlus 6 and 6T
 2021-02-26 21:03 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v4 2/2] dt-bindings: Document bindings for new SDM845 devices

page: 

Phone-Devel Archive on lore.kernel.org.

Archives are clonable:
	git clone --mirror https://lore.kernel.org/phone-devel/0 phone-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 phone-devel phone-devel/ https://lore.kernel.org/phone-devel \
		phone-devel@vger.kernel.org
	public-inbox-index phone-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.phone-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git