From: Caleb Connolly <caleb@connolly.tech>
To: caleb@connolly.tech, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes
Date: Wed, 10 Mar 2021 16:31:34 +0000 [thread overview]
Message-ID: <20210310163024.393578-4-caleb@connolly.tech> (raw)
In-Reply-To: <20210310163024.393578-1-caleb@connolly.tech>
Tested on the OnePlus 7 Pro (including DMA).
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 521 +++++++++++++++++++++++++++
1 file changed, 521 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 543417d74216..0a38ad54c715 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -588,6 +588,111 @@ qupv3_id_0: geniqup@8c0000 {
#size-cells = <2>;
ranges;
status = "disabled";
+
+ i2c0: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00898000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@89c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0089c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c7_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
};
qupv3_id_1: geniqup@ac0000 {
@@ -602,6 +707,58 @@ qupv3_id_1: geniqup@ac0000 {
ranges;
status = "disabled";
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c9_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c11_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart2: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
@@ -610,6 +767,32 @@ uart2: serial@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c12_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c16: i2c@94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0094000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c16_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
qupv3_id_2: geniqup@cc0000 {
@@ -624,6 +807,84 @@ qupv3_id_2: geniqup@cc0000 {
#size-cells = <2>;
ranges;
status = "disabled";
+
+ i2c17: i2c@c80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c17_default>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c18: i2c@c84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c18_default>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c19: i2c@c88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c19_default>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ };
+
+ i2c13: i2c@c8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c13_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c14: i2c@c90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c14_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@c94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c15_default>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
config_noc: interconnect@1500000 {
@@ -947,6 +1208,266 @@ tlmm: pinctrl@3100000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ qup_i2c0_default: qup-i2c0-default {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "qup0";
+ };
+
+ config {
+ pins = "gpio0", "gpio1";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c1_default: qup-i2c1-default {
+ mux {
+ pins = "gpio114", "gpio115";
+ function = "qup1";
+ };
+
+ config {
+ pins = "gpio114", "gpio115";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c2_default: qup-i2c2-default {
+ mux {
+ pins = "gpio126", "gpio127";
+ function = "qup2";
+ };
+
+ config {
+ pins = "gpio126", "gpio127";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c3_default: qup-i2c3-default {
+ mux {
+ pins = "gpio144", "gpio145";
+ function = "qup3";
+ };
+
+ config {
+ pins = "gpio144", "gpio145";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c4_default: qup-i2c4-default {
+ mux {
+ pins = "gpio51", "gpio52";
+ function = "qup4";
+ };
+
+ config {
+ pins = "gpio51", "gpio52";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c5_default: qup-i2c5-default {
+ mux {
+ pins = "gpio121", "gpio122";
+ function = "qup5";
+ };
+
+ config {
+ pins = "gpio121", "gpio122";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c6_default: qup-i2c6-default {
+ mux {
+ pins = "gpio6", "gpio7";
+ function = "qup6";
+ };
+
+ config {
+ pins = "gpio6", "gpio7";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c7_default: qup-i2c7-default {
+ mux {
+ pins = "gpio98", "gpio99";
+ function = "qup7";
+ };
+
+ config {
+ pins = "gpio98", "gpio99";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c8_default: qup-i2c8-default {
+ mux {
+ pins = "gpio88", "gpio89";
+ function = "qup8";
+ };
+
+ config {
+ pins = "gpio88", "gpio89";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c9_default: qup-i2c9-default {
+ mux {
+ pins = "gpio39", "gpio40";
+ function = "qup9";
+ };
+
+ config {
+ pins = "gpio39", "gpio40";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c10_default: qup-i2c10-default {
+ mux {
+ pins = "gpio9", "gpio10";
+ function = "qup10";
+ };
+
+ config {
+ pins = "gpio9", "gpio10";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c11_default: qup-i2c11-default {
+ mux {
+ pins = "gpio94", "gpio95";
+ function = "qup11";
+ };
+
+ config {
+ pins = "gpio94", "gpio95";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c12_default: qup-i2c12-default {
+ mux {
+ pins = "gpio83", "gpio84";
+ function = "qup12";
+ };
+
+ config {
+ pins = "gpio83", "gpio84";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c13_default: qup-i2c13-default {
+ mux {
+ pins = "gpio43", "gpio44";
+ function = "qup13";
+ };
+
+ config {
+ pins = "gpio43", "gpio44";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c14_default: qup-i2c14-default {
+ mux {
+ pins = "gpio47", "gpio48";
+ function = "qup14";
+ };
+
+ config {
+ pins = "gpio47", "gpio48";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c15_default: qup-i2c15-default {
+ mux {
+ pins = "gpio27", "gpio28";
+ function = "qup15";
+ };
+
+ config {
+ pins = "gpio27", "gpio28";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c16_default: qup-i2c16-default {
+ mux {
+ pins = "gpio86", "gpio85";
+ function = "qup16";
+ };
+
+ config {
+ pins = "gpio86", "gpio85";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c17_default: qup-i2c17-default {
+ mux {
+ pins = "gpio55", "gpio56";
+ function = "qup17";
+ };
+
+ config {
+ pins = "gpio55", "gpio56";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c18_default: qup-i2c18-default {
+ mux {
+ pins = "gpio23", "gpio24";
+ function = "qup18";
+ };
+
+ config {
+ pins = "gpio23", "gpio24";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c19_default: qup-i2c19-default {
+ mux {
+ pins = "gpio57", "gpio58";
+ function = "qup19";
+ };
+
+ config {
+ pins = "gpio57", "gpio58";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
};
remoteproc_mpss: remoteproc@4080000 {
--
2.29.2
next prev parent reply other threads:[~2021-03-10 16:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-10 16:31 arm64: dts: sm8150: start populating qups Caleb Connolly
2021-03-10 16:31 ` [PATCH 1/3] arm64: dts: qcom: sm8150: add other QUP nodes Caleb Connolly
2021-03-15 19:17 ` Bhupesh Sharma
2021-03-10 16:31 ` [PATCH 2/3] arm64: dts: qcom: sm8150: add iommus to qups Caleb Connolly
2021-03-15 19:07 ` Bhupesh Sharma
2021-03-16 6:15 ` Vinod Koul
2021-03-20 17:16 ` Caleb Connolly
2021-03-22 6:01 ` Vinod Koul
2021-03-10 16:31 ` Caleb Connolly [this message]
2021-03-15 19:16 ` [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes Bhupesh Sharma
2021-03-16 6:16 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210310163024.393578-4-caleb@connolly.tech \
--to=caleb@connolly.tech \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).