phone-devel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v7 0/6] Add support for Core Power Reduction v3, v4 and Hardened
@ 2021-09-01 15:57 AngeloGioacchino Del Regno
  2021-09-01 15:57 ` [PATCH v7 1/6] soc: qcom: cpr: Move common functions to new file AngeloGioacchino Del Regno
                   ` (5 more replies)
  0 siblings, 6 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-01 15:57 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, lgirdwood, broonie, linux-arm-msm, devicetree,
	linux-kernel, phone-devel, konrad.dybcio, marijn.suijten,
	jami.kettunen, paul.bouchara, martin.botka,
	~postmarketos/upstreaming, jeffrey.l.hugo, robh,
	AngeloGioacchino Del Regno

Changes in v7:
- Rebased on linux-next as of 210901
- Changed cpr_read_efuse calls to nvmem_cell_read_variable_le_u32,
  following what was done in commit c77634b9d916

Changes in v6:
- Fixes from Bjorn's review
- After a conversation with Viresh, it turned out I was abusing the
  OPP API to pass the APM and MEM-ACC thresholds to qcom-cpufreq-hw,
  so now the driver is using the genpd created virtual device and
  passing drvdata instead to stop the abuse
- Since the CPR commonization was ignored for more than 6 months,
  it is now included in the CPRv3/4/h series, as there is no point
  in commonizing without having this driver
- Rebased on v5.13

Changes in v5:
- Fixed getting OPP table when not yet installed by the caller
  of power domain attachment

Changes in v4:
- Huge patch series has been split for better reviewability,
  as suggested by Bjorn

Changes in v3:
- Fixed YAML doc issues
- Removed unused variables and redundant if branch

Changes in v2:
- Implemented dynamic Memory Accelerator corners support, needed
  by MSM8998
- Added MSM8998 Silver/Gold parameters

This commit introduces a new driver, based on the one for cpr v1,
to enable support for the newer Qualcomm Core Power Reduction
hardware, known downstream as CPR3, CPR4 and CPRh, and support
for MSM8998 and SDM630 CPU power reduction.

In these new versions of the hardware, support for various new
features was introduced, including voltage reduction for the GPU,
security hardening and a new way of controlling CPU DVFS,
consisting in internal communication between microcontrollers,
specifically the CPR-Hardened and the Operating State Manager.

The CPR v3, v4 and CPRh are present in a broad range of SoCs,
from the mid-range to the high end ones including, but not limited
to, MSM8953/8996/8998, SDM630/636/660/845.

As to clarify, SDM845 does the CPR/SAW/OSM setup in TZ firmware, but
this is limited to the CPU context; despite GPU CPR support being not
implemented in this series, it is planned for the future, and some
SDM845 need the CPR (in the context of GPU CPR) to be configured from
this driver.

It is also planned to add the CPR data for MSM8996, since this driver
does support the CPRv4 found on that SoC, but I currently have no time
to properly test that on a real device, so I prefer getting this big
implementation merged before adding more things on top.

As for MSM8953, we (read: nobody from SoMainline) have no device with
this chip: since we are unable to test the cpr data and the entire
driver on that one, we currently have no plans to do this addition
in the future. This is left to other nice developers: I'm sure that
somebody will come up with that, sooner or later ;)

Tested on the following smartphones:
- Sony Xperia XA2        (SDM630)
- Sony Xperia XA2 Ultra  (SDM630)
- Sony Xperia 10         (SDM630)
- Sony Xperia XZ Premium (MSM8998)
- F(x)Tec Pro 1          (MSM8998)

AngeloGioacchino Del Regno (6):
  soc: qcom: cpr: Move common functions to new file
  dt-bindings: avs: cpr: Convert binding to YAML schema
  arm64: qcom: qcs404: Change CPR nvmem-names
  soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened
  MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver
  dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver

 .../bindings/power/avs/qcom,cpr.txt           |  131 +-
 .../bindings/soc/qcom/qcom,cpr.yaml           |  167 +
 .../bindings/soc/qcom/qcom,cpr3.yaml          |  241 ++
 MAINTAINERS                                   |    8 +-
 arch/arm64/boot/dts/qcom/qcs404.dtsi          |   24 +-
 drivers/soc/qcom/Kconfig                      |   17 +
 drivers/soc/qcom/Makefile                     |    3 +-
 drivers/soc/qcom/cpr-common.c                 |  385 +++
 drivers/soc/qcom/cpr-common.h                 |  115 +
 drivers/soc/qcom/cpr.c                        |  399 +--
 drivers/soc/qcom/cpr3.c                       | 2901 +++++++++++++++++
 include/soc/qcom/cpr.h                        |   17 +
 12 files changed, 3888 insertions(+), 520 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
 create mode 100644 drivers/soc/qcom/cpr-common.c
 create mode 100644 drivers/soc/qcom/cpr-common.h
 create mode 100644 drivers/soc/qcom/cpr3.c
 create mode 100644 include/soc/qcom/cpr.h

-- 
2.32.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v7 1/6] soc: qcom: cpr: Move common functions to new file
  2021-09-01 15:57 [PATCH v7 0/6] Add support for Core Power Reduction v3, v4 and Hardened AngeloGioacchino Del Regno
@ 2021-09-01 15:57 ` AngeloGioacchino Del Regno
  2021-10-15 11:15   ` Vladimir Zapolskiy
  2021-09-01 15:57 ` [PATCH v7 2/6] dt-bindings: avs: cpr: Convert binding to YAML schema AngeloGioacchino Del Regno
                   ` (4 subsequent siblings)
  5 siblings, 1 reply; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-01 15:57 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, lgirdwood, broonie, linux-arm-msm, devicetree,
	linux-kernel, phone-devel, konrad.dybcio, marijn.suijten,
	jami.kettunen, paul.bouchara, martin.botka,
	~postmarketos/upstreaming, jeffrey.l.hugo, robh,
	AngeloGioacchino Del Regno

In preparation for implementing a new driver that will be handling
CPRv3, CPRv4 and CPR-Hardened, format out common functions to a new
file.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 drivers/soc/qcom/Makefile     |   2 +-
 drivers/soc/qcom/cpr-common.c | 362 ++++++++++++++++++++++++++++++
 drivers/soc/qcom/cpr-common.h | 111 ++++++++++
 drivers/soc/qcom/cpr.c        | 399 ++--------------------------------
 4 files changed, 497 insertions(+), 377 deletions(-)
 create mode 100644 drivers/soc/qcom/cpr-common.c
 create mode 100644 drivers/soc/qcom/cpr-common.h

diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index ad675a6593d0..8d1262a2e23c 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -3,7 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src)
 obj-$(CONFIG_QCOM_AOSS_QMP) +=	qcom_aoss.o
 obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
 obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
-obj-$(CONFIG_QCOM_CPR)		+= cpr.o
+obj-$(CONFIG_QCOM_CPR)		+= cpr-common.o cpr.o
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
 obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o
diff --git a/drivers/soc/qcom/cpr-common.c b/drivers/soc/qcom/cpr-common.c
new file mode 100644
index 000000000000..41fcc5863e72
--- /dev/null
+++ b/drivers/soc/qcom/cpr-common.c
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regulator/consumer.h>
+#include <linux/clk.h>
+#include <linux/nvmem-consumer.h>
+#include "cpr-common.h"
+
+int cpr_populate_ring_osc_idx(struct device *dev,
+			      struct fuse_corner *fuse_corner,
+			      const struct cpr_fuse *cpr_fuse,
+			      int num_fuse_corners)
+{
+	struct fuse_corner *end = fuse_corner + num_fuse_corners;
+	u32 data;
+	int ret;
+
+	for (; fuse_corner < end; fuse_corner++, cpr_fuse++) {
+		ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->ring_osc, &data);
+		if (ret)
+			return ret;
+		fuse_corner->ring_osc_idx = data;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpr_populate_ring_osc_idx);
+
+int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV,
+		     int adj, int step_volt, const char *init_v_efuse,
+		     struct device *dev)
+{
+	int steps, uV;
+	u32 bits = 0;
+	int ret;
+
+	ret = nvmem_cell_read_variable_le_u32(dev, init_v_efuse, &bits);
+	if (ret)
+		return ret;
+
+	steps = bits & (BIT(init_v_width - 1) - 1);
+	/* Not two's complement.. instead highest bit is sign bit */
+	if (bits & BIT(init_v_width - 1))
+		steps = -steps;
+
+	uV = ref_uV + steps * step_size_uV;
+
+	/* Apply open-loop fixed adjustments to fused values */
+	uV += adj;
+
+	return DIV_ROUND_UP(uV, step_volt) * step_volt;
+}
+EXPORT_SYMBOL_GPL(cpr_read_fuse_uV);
+
+const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid,
+				     int num_fuse_corners)
+{
+	struct cpr_fuse *fuses;
+	int i;
+
+	fuses = devm_kcalloc(dev, num_fuse_corners,
+			     sizeof(struct cpr_fuse),
+			     GFP_KERNEL);
+	if (!fuses)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < num_fuse_corners; i++) {
+		char tbuf[50];
+
+		snprintf(tbuf, sizeof(tbuf), "cpr%d_ring_osc%d", tid, i + 1);
+		fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL);
+		if (!fuses[i].ring_osc)
+			return ERR_PTR(-ENOMEM);
+
+		snprintf(tbuf, sizeof(tbuf),
+			 "cpr%d_init_voltage%d", tid, i + 1);
+		fuses[i].init_voltage = devm_kstrdup(dev, tbuf,
+						     GFP_KERNEL);
+		if (!fuses[i].init_voltage)
+			return ERR_PTR(-ENOMEM);
+
+		snprintf(tbuf, sizeof(tbuf), "cpr%d_quotient%d", tid, i + 1);
+		fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL);
+		if (!fuses[i].quotient)
+			return ERR_PTR(-ENOMEM);
+
+		snprintf(tbuf, sizeof(tbuf),
+			 "cpr%d_quotient_offset%d", tid, i + 1);
+		fuses[i].quotient_offset = devm_kstrdup(dev, tbuf,
+							GFP_KERNEL);
+		if (!fuses[i].quotient_offset)
+			return ERR_PTR(-ENOMEM);
+	}
+
+	return fuses;
+}
+EXPORT_SYMBOL_GPL(cpr_get_fuses);
+
+int cpr_populate_fuse_common(struct device *dev,
+			     struct fuse_corner_data *fdata,
+			     const struct cpr_fuse *cpr_fuse,
+			     struct fuse_corner *fuse_corner,
+			     int step_volt, int init_v_width,
+			     int init_v_step)
+{
+	int uV, ret;
+
+	/* Populate uV */
+	uV = cpr_read_fuse_uV(init_v_width, init_v_step,
+			      fdata->ref_uV, fdata->volt_oloop_adjust,
+			      step_volt, cpr_fuse->init_voltage, dev);
+	if (uV < 0)
+		return uV;
+
+	/*
+	 * Update SoC voltages: platforms might choose a different
+	 * regulators than the one used to characterize the algorithms
+	 * (ie, init_voltage_step).
+	 */
+	fdata->min_uV = roundup(fdata->min_uV, step_volt);
+	fdata->max_uV = roundup(fdata->max_uV, step_volt);
+
+	fuse_corner->min_uV = fdata->min_uV;
+	fuse_corner->max_uV = fdata->max_uV;
+	fuse_corner->uV = clamp(uV, fuse_corner->min_uV, fuse_corner->max_uV);
+
+	/* Populate target quotient by scaling */
+	ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->quotient, &fuse_corner->quot);
+	if (ret)
+		return ret;
+
+	fuse_corner->quot *= fdata->quot_scale;
+	fuse_corner->quot += fdata->quot_offset;
+	fuse_corner->quot += fdata->quot_adjust;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpr_populate_fuse_common);
+
+/*
+ * Returns: Index of the initial corner or negative number for error.
+ */
+int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
+			    struct corner *corners, int num_corners)
+{
+	unsigned long rate;
+	struct corner *iter, *corner;
+	const struct corner *end;
+	unsigned int ret = 0;
+
+	if (!cpu_clk)
+		return -EINVAL;
+
+	end = &corners[num_corners - 1];
+	rate = clk_get_rate(cpu_clk);
+
+	/*
+	 * Some bootloaders set a CPU clock frequency that is not defined
+	 * in the OPP table. When running at an unlisted frequency,
+	 * cpufreq_online() will change to the OPP which has the lowest
+	 * frequency, at or above the unlisted frequency.
+	 * Since cpufreq_online() always "rounds up" in the case of an
+	 * unlisted frequency, this function always "rounds down" in case
+	 * of an unlisted frequency. That way, when cpufreq_online()
+	 * triggers the first ever call to cpr_set_performance_state(),
+	 * it will correctly determine the direction as UP.
+	 */
+	for (iter = corners; iter <= end; iter++) {
+		if (iter->freq > rate)
+			break;
+		ret++;
+		if (iter->freq == rate) {
+			corner = iter;
+			break;
+		}
+		if (iter->freq < rate)
+			corner = iter;
+	}
+
+	if (!corner) {
+		dev_err(dev, "boot up corner not found\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "boot up perf state: %u\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cpr_find_initial_corner);
+
+u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid)
+{
+	struct device_node *np;
+	u32 fc;
+
+	np = dev_pm_opp_get_of_node(opp);
+	if (of_property_read_u32_index(np, "qcom,opp-fuse-level", tid, &fc)) {
+		pr_debug("%s: missing 'qcom,opp-fuse-level' property\n",
+			 __func__);
+		fc = 0;
+	}
+
+	of_node_put(np);
+
+	return fc;
+}
+EXPORT_SYMBOL_GPL(cpr_get_fuse_corner);
+
+unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
+				     struct device *cpu_dev)
+{
+	u64 rate = 0;
+	struct device_node *ref_np;
+	struct device_node *desc_np;
+	struct device_node *child_np = NULL;
+	struct device_node *child_req_np = NULL;
+
+	desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+	if (!desc_np)
+		return 0;
+
+	ref_np = dev_pm_opp_get_of_node(ref);
+	if (!ref_np)
+		goto out_ref;
+
+	do {
+		of_node_put(child_req_np);
+		child_np = of_get_next_available_child(desc_np, child_np);
+		child_req_np = of_parse_phandle(child_np, "required-opps", 0);
+	} while (child_np && child_req_np != ref_np);
+
+	if (child_np && child_req_np == ref_np)
+		of_property_read_u64(child_np, "opp-hz", &rate);
+
+	of_node_put(child_req_np);
+	of_node_put(child_np);
+	of_node_put(ref_np);
+out_ref:
+	of_node_put(desc_np);
+
+	return (unsigned long) rate;
+}
+EXPORT_SYMBOL_GPL(cpr_get_opp_hz_for_req);
+
+int cpr_calculate_scaling(const char *quot_offset,
+			  struct device *dev,
+			  const struct fuse_corner_data *fdata,
+			  const struct corner *corner)
+{
+	u32 quot_diff = 0;
+	unsigned long freq_diff;
+	int scaling;
+	const struct fuse_corner *fuse, *prev_fuse;
+	int ret;
+
+	fuse = corner->fuse_corner;
+	prev_fuse = fuse - 1;
+
+	if (quot_offset) {
+		ret = nvmem_cell_read_variable_le_u32(dev, quot_offset, &quot_diff);
+		if (ret)
+			return ret;
+
+		quot_diff *= fdata->quot_offset_scale;
+		quot_diff += fdata->quot_offset_adjust;
+	} else {
+		quot_diff = fuse->quot - prev_fuse->quot;
+	}
+
+	freq_diff = fuse->max_freq - prev_fuse->max_freq;
+	freq_diff /= 1000000; /* Convert to MHz */
+	scaling = 1000 * quot_diff / freq_diff;
+	return min(scaling, fdata->max_quot_scale);
+}
+EXPORT_SYMBOL_GPL(cpr_calculate_scaling);
+
+int cpr_interpolate(const struct corner *corner, int step_volt,
+		    const struct fuse_corner_data *fdata)
+{
+	unsigned long f_high, f_low, f_diff;
+	int uV_high, uV_low, uV;
+	u64 temp, temp_limit;
+	const struct fuse_corner *fuse, *prev_fuse;
+
+	fuse = corner->fuse_corner;
+	prev_fuse = fuse - 1;
+
+	f_high = fuse->max_freq;
+	f_low = prev_fuse->max_freq;
+	uV_high = fuse->uV;
+	uV_low = prev_fuse->uV;
+	f_diff = fuse->max_freq - corner->freq;
+
+	/*
+	 * Don't interpolate in the wrong direction. This could happen
+	 * if the adjusted fuse voltage overlaps with the previous fuse's
+	 * adjusted voltage.
+	 */
+	if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq)
+		return corner->uV;
+
+	temp = f_diff * (uV_high - uV_low);
+	do_div(temp, f_high - f_low);
+
+	/*
+	 * max_volt_scale has units of uV/MHz while freq values
+	 * have units of Hz.  Divide by 1000000 to convert to.
+	 */
+	temp_limit = f_diff * fdata->max_volt_scale;
+	do_div(temp_limit, 1000000);
+
+	uV = uV_high - min(temp, temp_limit);
+	return roundup(uV, step_volt);
+}
+EXPORT_SYMBOL_GPL(cpr_interpolate);
+
+int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg,
+			       struct fuse_corner *f)
+{
+	int ret;
+
+	ret = regulator_is_supported_voltage(vreg, f->min_uV, f->min_uV);
+	if (!ret) {
+		dev_err(dev, "min uV: %d not supported by regulator\n",
+			f->min_uV);
+		return -EINVAL;
+	}
+
+	ret = regulator_is_supported_voltage(vreg, f->max_uV, f->max_uV);
+	if (!ret) {
+		dev_err(dev, "max uV: %d not supported by regulator\n",
+			f->max_uV);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpr_check_vreg_constraints);
+
+MODULE_DESCRIPTION("Core Power Reduction (CPR) common");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/cpr-common.h b/drivers/soc/qcom/cpr-common.h
new file mode 100644
index 000000000000..54013b8a8e87
--- /dev/null
+++ b/drivers/soc/qcom/cpr-common.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regulator/consumer.h>
+
+enum voltage_change_dir {
+	NO_CHANGE,
+	DOWN,
+	UP,
+};
+
+struct fuse_corner_data {
+	int ref_uV;
+	int max_uV;
+	int min_uV;
+	int range_uV;
+	/* fuse volt: closed/open loop */
+	int volt_cloop_adjust;
+	int volt_oloop_adjust;
+	int max_volt_scale;
+	int max_quot_scale;
+	/* fuse quot */
+	int quot_offset;
+	int quot_scale;
+	int quot_adjust;
+	/* fuse quot_offset */
+	int quot_offset_scale;
+	int quot_offset_adjust;
+};
+
+struct cpr_fuse {
+	char *ring_osc;
+	char *init_voltage;
+	char *quotient;
+	char *quotient_offset;
+};
+
+struct fuse_corner {
+	int min_uV;
+	int max_uV;
+	int uV;
+	int quot;
+	int step_quot;
+	const struct reg_sequence *accs;
+	int num_accs;
+	unsigned long max_freq;
+	u8 ring_osc_idx;
+};
+
+struct corner {
+	int min_uV;
+	int max_uV;
+	int uV;
+	int last_uV;
+	int quot_adjust;
+	u32 save_ctl;
+	u32 save_irq;
+	unsigned long freq;
+	bool is_open_loop;
+	struct fuse_corner *fuse_corner;
+};
+
+struct corner_data {
+	unsigned int fuse_corner;
+	unsigned long freq;
+};
+
+struct acc_desc {
+	unsigned int	enable_reg;
+	u32		enable_mask;
+
+	struct reg_sequence	*config;
+	struct reg_sequence	*settings;
+	int			num_regs_per_fuse;
+};
+
+struct cpr_acc_desc {
+	const struct cpr_desc *cpr_desc;
+	const struct acc_desc *acc_desc;
+};
+
+int cpr_populate_ring_osc_idx(struct device *dev,
+			      struct fuse_corner *fuse_corner,
+			      const struct cpr_fuse *cpr_fuse,
+			      int num_fuse_corners);
+int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV,
+		     int adj, int step_volt, const char *init_v_efuse,
+		     struct device *dev);
+const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid,
+				     int num_fuse_corners);
+int cpr_populate_fuse_common(struct device *dev,
+			     struct fuse_corner_data *fdata,
+			     const struct cpr_fuse *cpr_fuse,
+			     struct fuse_corner *fuse_corner,
+			     int step_volt, int init_v_width,
+			     int init_v_step);
+int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
+			    struct corner *corners, int num_corners);
+u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid);
+unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
+				     struct device *cpu_dev);
+int cpr_calculate_scaling(const char *quot_offset,
+			  struct device *dev,
+			  const struct fuse_corner_data *fdata,
+			  const struct corner *corner);
+int cpr_interpolate(const struct corner *corner, int step_volt,
+		    const struct fuse_corner_data *fdata);
+int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg,
+			       struct fuse_corner *f);
diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c
index 4ce8e816154f..57206650bc6a 100644
--- a/drivers/soc/qcom/cpr.c
+++ b/drivers/soc/qcom/cpr.c
@@ -25,6 +25,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/clk.h>
 #include <linux/nvmem-consumer.h>
+#include "cpr-common.h"
 
 /* Register Offsets for RB-CPR and Bit Definitions */
 
@@ -124,45 +125,12 @@
 
 #define FUSE_REVISION_UNKNOWN		(-1)
 
-enum voltage_change_dir {
-	NO_CHANGE,
-	DOWN,
-	UP,
-};
-
-struct cpr_fuse {
-	char *ring_osc;
-	char *init_voltage;
-	char *quotient;
-	char *quotient_offset;
-};
-
-struct fuse_corner_data {
-	int ref_uV;
-	int max_uV;
-	int min_uV;
-	int max_volt_scale;
-	int max_quot_scale;
-	/* fuse quot */
-	int quot_offset;
-	int quot_scale;
-	int quot_adjust;
-	/* fuse quot_offset */
-	int quot_offset_scale;
-	int quot_offset_adjust;
-};
-
 struct cpr_fuses {
 	int init_voltage_step;
 	int init_voltage_width;
 	struct fuse_corner_data *fuse_corner_data;
 };
 
-struct corner_data {
-	unsigned int fuse_corner;
-	unsigned long freq;
-};
-
 struct cpr_desc {
 	unsigned int num_fuse_corners;
 	int min_diff_quot;
@@ -184,44 +152,6 @@ struct cpr_desc {
 	bool reduce_to_corner_uV;
 };
 
-struct acc_desc {
-	unsigned int	enable_reg;
-	u32		enable_mask;
-
-	struct reg_sequence	*config;
-	struct reg_sequence	*settings;
-	int			num_regs_per_fuse;
-};
-
-struct cpr_acc_desc {
-	const struct cpr_desc *cpr_desc;
-	const struct acc_desc *acc_desc;
-};
-
-struct fuse_corner {
-	int min_uV;
-	int max_uV;
-	int uV;
-	int quot;
-	int step_quot;
-	const struct reg_sequence *accs;
-	int num_accs;
-	unsigned long max_freq;
-	u8 ring_osc_idx;
-};
-
-struct corner {
-	int min_uV;
-	int max_uV;
-	int uV;
-	int last_uV;
-	int quot_adjust;
-	u32 save_ctl;
-	u32 save_irq;
-	unsigned long freq;
-	struct fuse_corner *fuse_corner;
-};
-
 struct cpr_drv {
 	unsigned int		num_corners;
 	unsigned int		ref_clk_khz;
@@ -801,50 +731,6 @@ static int cpr_set_performance_state(struct generic_pm_domain *domain,
 	return ret;
 }
 
-static int
-cpr_populate_ring_osc_idx(struct cpr_drv *drv)
-{
-	struct fuse_corner *fuse = drv->fuse_corners;
-	struct fuse_corner *end = fuse + drv->desc->num_fuse_corners;
-	const struct cpr_fuse *fuses = drv->cpr_fuses;
-	u32 data;
-	int ret;
-
-	for (; fuse < end; fuse++, fuses++) {
-		ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->ring_osc, &data);
-		if (ret)
-			return ret;
-		fuse->ring_osc_idx = data;
-	}
-
-	return 0;
-}
-
-static int cpr_read_fuse_uV(const struct cpr_desc *desc,
-			    const struct fuse_corner_data *fdata,
-			    const char *init_v_efuse,
-			    int step_volt,
-			    struct cpr_drv *drv)
-{
-	int step_size_uV, steps, uV;
-	u32 bits = 0;
-	int ret;
-
-	ret = nvmem_cell_read_variable_le_u32(drv->dev, init_v_efuse, &bits);
-	if (ret)
-		return ret;
-
-	steps = bits & ~BIT(desc->cpr_fuses.init_voltage_width - 1);
-	/* Not two's complement.. instead highest bit is sign bit */
-	if (bits & BIT(desc->cpr_fuses.init_voltage_width - 1))
-		steps = -steps;
-
-	step_size_uV = desc->cpr_fuses.init_voltage_step;
-
-	uV = fdata->ref_uV + steps * step_size_uV;
-	return DIV_ROUND_UP(uV, step_volt) * step_volt;
-}
-
 static int cpr_fuse_corner_init(struct cpr_drv *drv)
 {
 	const struct cpr_desc *desc = drv->desc;
@@ -854,7 +740,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
 	unsigned int step_volt;
 	struct fuse_corner_data *fdata;
 	struct fuse_corner *fuse, *end;
-	int uV;
 	const struct reg_sequence *accs;
 	int ret;
 
@@ -870,23 +755,15 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
 	fdata = desc->cpr_fuses.fuse_corner_data;
 
 	for (i = 0; fuse <= end; fuse++, fuses++, i++, fdata++) {
-		/*
-		 * Update SoC voltages: platforms might choose a different
-		 * regulators than the one used to characterize the algorithms
-		 * (ie, init_voltage_step).
-		 */
-		fdata->min_uV = roundup(fdata->min_uV, step_volt);
-		fdata->max_uV = roundup(fdata->max_uV, step_volt);
-
-		/* Populate uV */
-		uV = cpr_read_fuse_uV(desc, fdata, fuses->init_voltage,
-				      step_volt, drv);
-		if (uV < 0)
-			return uV;
+		ret = cpr_populate_fuse_common(
+					drv->dev, fdata, fuses,
+					fuse, step_volt,
+					desc->cpr_fuses.init_voltage_width,
+					desc->cpr_fuses.init_voltage_step);
+		if (ret)
+			return ret;
 
-		fuse->min_uV = fdata->min_uV;
-		fuse->max_uV = fdata->max_uV;
-		fuse->uV = clamp(uV, fuse->min_uV, fuse->max_uV);
+		fuse->step_quot = desc->step_quot[fuse->ring_osc_idx];
 
 		if (fuse == end) {
 			/*
@@ -898,16 +775,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
 			end->max_uV = max(end->max_uV, end->uV);
 		}
 
-		/* Populate target quotient by scaling */
-		ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->quotient, &fuse->quot);
-		if (ret)
-			return ret;
-
-		fuse->quot *= fdata->quot_scale;
-		fuse->quot += fdata->quot_offset;
-		fuse->quot += fdata->quot_adjust;
-		fuse->step_quot = desc->step_quot[fuse->ring_osc_idx];
-
 		/* Populate acc settings */
 		fuse->accs = accs;
 		fuse->num_accs = acc_desc->num_regs_per_fuse;
@@ -924,25 +791,9 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
 		else if (fuse->uV < fuse->min_uV)
 			fuse->uV = fuse->min_uV;
 
-		ret = regulator_is_supported_voltage(drv->vdd_apc,
-						     fuse->min_uV,
-						     fuse->min_uV);
-		if (!ret) {
-			dev_err(drv->dev,
-				"min uV: %d (fuse corner: %d) not supported by regulator\n",
-				fuse->min_uV, i);
-			return -EINVAL;
-		}
-
-		ret = regulator_is_supported_voltage(drv->vdd_apc,
-						     fuse->max_uV,
-						     fuse->max_uV);
-		if (!ret) {
-			dev_err(drv->dev,
-				"max uV: %d (fuse corner: %d) not supported by regulator\n",
-				fuse->max_uV, i);
-			return -EINVAL;
-		}
+		ret = cpr_check_vreg_constraints(drv->dev, drv->vdd_apc, fuse);
+		if (ret)
+			return ret;
 
 		dev_dbg(drv->dev,
 			"fuse corner %d: [%d %d %d] RO%hhu quot %d squot %d\n",
@@ -953,126 +804,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
 	return 0;
 }
 
-static int cpr_calculate_scaling(const char *quot_offset,
-				 struct cpr_drv *drv,
-				 const struct fuse_corner_data *fdata,
-				 const struct corner *corner)
-{
-	u32 quot_diff = 0;
-	unsigned long freq_diff;
-	int scaling;
-	const struct fuse_corner *fuse, *prev_fuse;
-	int ret;
-
-	fuse = corner->fuse_corner;
-	prev_fuse = fuse - 1;
-
-	if (quot_offset) {
-		ret = nvmem_cell_read_variable_le_u32(drv->dev, quot_offset, &quot_diff);
-		if (ret)
-			return ret;
-
-		quot_diff *= fdata->quot_offset_scale;
-		quot_diff += fdata->quot_offset_adjust;
-	} else {
-		quot_diff = fuse->quot - prev_fuse->quot;
-	}
-
-	freq_diff = fuse->max_freq - prev_fuse->max_freq;
-	freq_diff /= 1000000; /* Convert to MHz */
-	scaling = 1000 * quot_diff / freq_diff;
-	return min(scaling, fdata->max_quot_scale);
-}
-
-static int cpr_interpolate(const struct corner *corner, int step_volt,
-			   const struct fuse_corner_data *fdata)
-{
-	unsigned long f_high, f_low, f_diff;
-	int uV_high, uV_low, uV;
-	u64 temp, temp_limit;
-	const struct fuse_corner *fuse, *prev_fuse;
-
-	fuse = corner->fuse_corner;
-	prev_fuse = fuse - 1;
-
-	f_high = fuse->max_freq;
-	f_low = prev_fuse->max_freq;
-	uV_high = fuse->uV;
-	uV_low = prev_fuse->uV;
-	f_diff = fuse->max_freq - corner->freq;
-
-	/*
-	 * Don't interpolate in the wrong direction. This could happen
-	 * if the adjusted fuse voltage overlaps with the previous fuse's
-	 * adjusted voltage.
-	 */
-	if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq)
-		return corner->uV;
-
-	temp = f_diff * (uV_high - uV_low);
-	do_div(temp, f_high - f_low);
-
-	/*
-	 * max_volt_scale has units of uV/MHz while freq values
-	 * have units of Hz.  Divide by 1000000 to convert to.
-	 */
-	temp_limit = f_diff * fdata->max_volt_scale;
-	do_div(temp_limit, 1000000);
-
-	uV = uV_high - min(temp, temp_limit);
-	return roundup(uV, step_volt);
-}
-
-static unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp)
-{
-	struct device_node *np;
-	unsigned int fuse_corner = 0;
-
-	np = dev_pm_opp_get_of_node(opp);
-	if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner))
-		pr_err("%s: missing 'qcom,opp-fuse-level' property\n",
-		       __func__);
-
-	of_node_put(np);
-
-	return fuse_corner;
-}
-
-static unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
-					    struct device *cpu_dev)
-{
-	u64 rate = 0;
-	struct device_node *ref_np;
-	struct device_node *desc_np;
-	struct device_node *child_np = NULL;
-	struct device_node *child_req_np = NULL;
-
-	desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
-	if (!desc_np)
-		return 0;
-
-	ref_np = dev_pm_opp_get_of_node(ref);
-	if (!ref_np)
-		goto out_ref;
-
-	do {
-		of_node_put(child_req_np);
-		child_np = of_get_next_available_child(desc_np, child_np);
-		child_req_np = of_parse_phandle(child_np, "required-opps", 0);
-	} while (child_np && child_req_np != ref_np);
-
-	if (child_np && child_req_np == ref_np)
-		of_property_read_u64(child_np, "opp-hz", &rate);
-
-	of_node_put(child_req_np);
-	of_node_put(child_np);
-	of_node_put(ref_np);
-out_ref:
-	of_node_put(desc_np);
-
-	return (unsigned long) rate;
-}
-
 static int cpr_corner_init(struct cpr_drv *drv)
 {
 	const struct cpr_desc *desc = drv->desc;
@@ -1110,7 +841,7 @@ static int cpr_corner_init(struct cpr_drv *drv)
 		opp = dev_pm_opp_find_level_exact(&drv->pd.dev, level);
 		if (IS_ERR(opp))
 			return -EINVAL;
-		fc = cpr_get_fuse_corner(opp);
+		fc = cpr_get_fuse_corner(opp, 0);
 		if (!fc) {
 			dev_pm_opp_put(opp);
 			return -EINVAL;
@@ -1186,7 +917,7 @@ static int cpr_corner_init(struct cpr_drv *drv)
 		corner->uV = fuse->uV;
 
 		if (prev_fuse && cdata[i - 1].freq == prev_fuse->max_freq) {
-			scaling = cpr_calculate_scaling(quot_offset, drv,
+			scaling = cpr_calculate_scaling(quot_offset, drv->dev,
 							fdata, corner);
 			if (scaling < 0)
 				return scaling;
@@ -1224,47 +955,6 @@ static int cpr_corner_init(struct cpr_drv *drv)
 	return 0;
 }
 
-static const struct cpr_fuse *cpr_get_fuses(struct cpr_drv *drv)
-{
-	const struct cpr_desc *desc = drv->desc;
-	struct cpr_fuse *fuses;
-	int i;
-
-	fuses = devm_kcalloc(drv->dev, desc->num_fuse_corners,
-			     sizeof(struct cpr_fuse),
-			     GFP_KERNEL);
-	if (!fuses)
-		return ERR_PTR(-ENOMEM);
-
-	for (i = 0; i < desc->num_fuse_corners; i++) {
-		char tbuf[32];
-
-		snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1);
-		fuses[i].ring_osc = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL);
-		if (!fuses[i].ring_osc)
-			return ERR_PTR(-ENOMEM);
-
-		snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1);
-		fuses[i].init_voltage = devm_kstrdup(drv->dev, tbuf,
-						     GFP_KERNEL);
-		if (!fuses[i].init_voltage)
-			return ERR_PTR(-ENOMEM);
-
-		snprintf(tbuf, 32, "cpr_quotient%d", i + 1);
-		fuses[i].quotient = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL);
-		if (!fuses[i].quotient)
-			return ERR_PTR(-ENOMEM);
-
-		snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1);
-		fuses[i].quotient_offset = devm_kstrdup(drv->dev, tbuf,
-							GFP_KERNEL);
-		if (!fuses[i].quotient_offset)
-			return ERR_PTR(-ENOMEM);
-	}
-
-	return fuses;
-}
-
 static void cpr_set_loop_allowed(struct cpr_drv *drv)
 {
 	drv->loop_disabled = false;
@@ -1296,54 +986,6 @@ static int cpr_init_parameters(struct cpr_drv *drv)
 	return 0;
 }
 
-static int cpr_find_initial_corner(struct cpr_drv *drv)
-{
-	unsigned long rate;
-	const struct corner *end;
-	struct corner *iter;
-	unsigned int i = 0;
-
-	if (!drv->cpu_clk) {
-		dev_err(drv->dev, "cannot get rate from NULL clk\n");
-		return -EINVAL;
-	}
-
-	end = &drv->corners[drv->num_corners - 1];
-	rate = clk_get_rate(drv->cpu_clk);
-
-	/*
-	 * Some bootloaders set a CPU clock frequency that is not defined
-	 * in the OPP table. When running at an unlisted frequency,
-	 * cpufreq_online() will change to the OPP which has the lowest
-	 * frequency, at or above the unlisted frequency.
-	 * Since cpufreq_online() always "rounds up" in the case of an
-	 * unlisted frequency, this function always "rounds down" in case
-	 * of an unlisted frequency. That way, when cpufreq_online()
-	 * triggers the first ever call to cpr_set_performance_state(),
-	 * it will correctly determine the direction as UP.
-	 */
-	for (iter = drv->corners; iter <= end; iter++) {
-		if (iter->freq > rate)
-			break;
-		i++;
-		if (iter->freq == rate) {
-			drv->corner = iter;
-			break;
-		}
-		if (iter->freq < rate)
-			drv->corner = iter;
-	}
-
-	if (!drv->corner) {
-		dev_err(drv->dev, "boot up corner not found\n");
-		return -EINVAL;
-	}
-
-	dev_dbg(drv->dev, "boot up perf state: %u\n", i);
-
-	return 0;
-}
-
 static const struct cpr_desc qcs404_cpr_desc = {
 	.num_fuse_corners = 3,
 	.min_diff_quot = CPR_FUSE_MIN_QUOT_DIFF,
@@ -1531,8 +1173,9 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain,
 	if (ret)
 		goto unlock;
 
-	ret = cpr_find_initial_corner(drv);
-	if (ret)
+	ret = cpr_find_initial_corner(drv->dev, drv->cpu_clk, drv->corners,
+				      drv->num_corners);
+	if (ret < 0)
 		goto unlock;
 
 	if (acc_desc->config)
@@ -1617,6 +1260,7 @@ static int cpr_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct device *dev = &pdev->dev;
 	struct cpr_drv *drv;
+	const struct cpr_desc *desc;
 	int irq, ret;
 	const struct cpr_acc_desc *data;
 	struct device_node *np;
@@ -1632,6 +1276,7 @@ static int cpr_probe(struct platform_device *pdev)
 	drv->dev = dev;
 	drv->desc = data->cpr_desc;
 	drv->acc_desc = data->acc_desc;
+	desc = drv->desc;
 
 	drv->fuse_corners = devm_kcalloc(dev, drv->desc->num_fuse_corners,
 					 sizeof(*drv->fuse_corners),
@@ -1672,11 +1317,13 @@ static int cpr_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	drv->cpr_fuses = cpr_get_fuses(drv);
+	drv->cpr_fuses = cpr_get_fuses(drv->dev, 0, desc->num_fuse_corners);
 	if (IS_ERR(drv->cpr_fuses))
 		return PTR_ERR(drv->cpr_fuses);
 
-	ret = cpr_populate_ring_osc_idx(drv);
+	ret = cpr_populate_ring_osc_idx(drv->dev, drv->fuse_corners,
+					drv->cpr_fuses,
+					desc->num_fuse_corners);
 	if (ret)
 		return ret;
 
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v7 2/6] dt-bindings: avs: cpr: Convert binding to YAML schema
  2021-09-01 15:57 [PATCH v7 0/6] Add support for Core Power Reduction v3, v4 and Hardened AngeloGioacchino Del Regno
  2021-09-01 15:57 ` [PATCH v7 1/6] soc: qcom: cpr: Move common functions to new file AngeloGioacchino Del Regno
@ 2021-09-01 15:57 ` AngeloGioacchino Del Regno
  2021-09-07 18:28   ` Rob Herring
  2021-09-20  0:51   ` Bjorn Andersson
  2021-09-01 15:57 ` [PATCH v7 3/6] arm64: qcom: qcs404: Change CPR nvmem-names AngeloGioacchino Del Regno
                   ` (3 subsequent siblings)
  5 siblings, 2 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-01 15:57 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, lgirdwood, broonie, linux-arm-msm, devicetree,
	linux-kernel, phone-devel, konrad.dybcio, marijn.suijten,
	jami.kettunen, paul.bouchara, martin.botka,
	~postmarketos/upstreaming, jeffrey.l.hugo, robh,
	AngeloGioacchino Del Regno

Convert the qcom,cpr.txt document to YAML schema and place it in the
appropriate directory, since this driver was moved from power/avs
to soc/qcom, but forgets to move the documentation.

Fixes: a7305e684fcf ("PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 .../bindings/power/avs/qcom,cpr.txt           | 131 +-------------
 .../bindings/soc/qcom/qcom,cpr.yaml           | 167 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 169 insertions(+), 131 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml

diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
index ab0d5ebbad4e..2ada8cd08949 100644
--- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
+++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
@@ -1,130 +1 @@
-QCOM CPR (Core Power Reduction)
-
-CPR (Core Power Reduction) is a technology to reduce core power on a CPU
-or other device. Each OPP of a device corresponds to a "corner" that has
-a range of valid voltages for a particular frequency. While the device is
-running at a particular frequency, CPR monitors dynamic factors such as
-temperature, etc. and suggests adjustments to the voltage to save power
-and meet silicon characteristic requirements.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address and size of the rbcpr register region
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the CPR interrupt
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: phandle to the reference clock
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "ref"
-
-- vdd-apc-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: phandle to the vdd-apc-supply regulator
-
-- #power-domain-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: should be 0
-
-- operating-points-v2:
-	Usage: required
-	Value type: <phandle>
-	Definition: A phandle to the OPP table containing the
-		    performance states supported by the CPR
-		    power domain
-
-- acc-syscon:
-	Usage: optional
-	Value type: <phandle>
-	Definition: phandle to syscon for writing ACC settings
-
-- nvmem-cells:
-	Usage: required
-	Value type: <phandle>
-	Definition: phandle to nvmem cells containing the data
-		    that makes up a fuse corner, for each fuse corner.
-		    As well as the CPR fuse revision.
-
-- nvmem-cell-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2",
-		    "cpr_quotient_offset3", "cpr_init_voltage1",
-		    "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1",
-		    "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1",
-		    "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision"
-		    for qcs404.
-
-Example:
-
-	cpr_opp_table: cpr-opp-table {
-		compatible = "operating-points-v2-qcom-level";
-
-		cpr_opp1: opp1 {
-			opp-level = <1>;
-			qcom,opp-fuse-level = <1>;
-		};
-		cpr_opp2: opp2 {
-			opp-level = <2>;
-			qcom,opp-fuse-level = <2>;
-		};
-		cpr_opp3: opp3 {
-			opp-level = <3>;
-			qcom,opp-fuse-level = <3>;
-		};
-	};
-
-	power-controller@b018000 {
-		compatible = "qcom,qcs404-cpr", "qcom,cpr";
-		reg = <0x0b018000 0x1000>;
-		interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&xo_board>;
-		clock-names = "ref";
-		vdd-apc-supply = <&pms405_s3>;
-		#power-domain-cells = <0>;
-		operating-points-v2 = <&cpr_opp_table>;
-		acc-syscon = <&tcsr>;
-
-		nvmem-cells = <&cpr_efuse_quot_offset1>,
-			<&cpr_efuse_quot_offset2>,
-			<&cpr_efuse_quot_offset3>,
-			<&cpr_efuse_init_voltage1>,
-			<&cpr_efuse_init_voltage2>,
-			<&cpr_efuse_init_voltage3>,
-			<&cpr_efuse_quot1>,
-			<&cpr_efuse_quot2>,
-			<&cpr_efuse_quot3>,
-			<&cpr_efuse_ring1>,
-			<&cpr_efuse_ring2>,
-			<&cpr_efuse_ring3>,
-			<&cpr_efuse_revision>;
-		nvmem-cell-names = "cpr_quotient_offset1",
-			"cpr_quotient_offset2",
-			"cpr_quotient_offset3",
-			"cpr_init_voltage1",
-			"cpr_init_voltage2",
-			"cpr_init_voltage3",
-			"cpr_quotient1",
-			"cpr_quotient2",
-			"cpr_quotient3",
-			"cpr_ring_osc1",
-			"cpr_ring_osc2",
-			"cpr_ring_osc3",
-			"cpr_fuse_revision";
-	};
+This file has been moved to ../../soc/qcom/qcom,cpr.yaml
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
new file mode 100644
index 000000000000..20f65427c762
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Core Power Reduction (CPR)
+
+description: |
+  CPR (Core Power Reduction) is a technology to reduce core power on a CPU
+  or other device. Each OPP of a device corresponds to a "corner" that has
+  a range of valid voltages for a particular frequency. While the device is
+  running at a particular frequency, CPR monitors dynamic factors such as
+  temperature, etc. and suggests adjustments to the voltage to save power
+  and meet silicon characteristic requirements.
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qcs404-cpr
+      - const: qcom,cpr
+
+  reg:
+    description: Base address and size of the RBCPR register region
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+  clocks:
+    items:
+      - description: CPR reference clock
+
+  vdd-apc-supply:
+    description: Autonomous Phase Control (APC) power supply
+
+  '#power-domain-cells':
+    const: 0
+
+  acc-syscon:
+    description: phandle to syscon for writing ACC settings
+
+  nvmem-cells:
+    minItems: 9
+    maxItems: 32
+    description: Cells containing the fuse corners and revision data
+
+  nvmem-cell-names:
+    minItems: 9
+    maxItems: 32
+
+  operating-points-v2: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - vdd-apc-supply
+  - "#power-domain-cells"
+  - nvmem-cells
+  - nvmem-cell-names
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@100 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x100>;
+            operating-points-v2 = <&cpu_opp_table>;
+            power-domains = <&cpr>;
+            power-domain-names = "cpr";
+        };
+    };
+
+    cpu_opp_table: opp-table-cpu {
+        compatible = "operating-points-v2-kryo-cpu";
+        opp-shared;
+
+        opp-1094400000 {
+            opp-hz = /bits/ 64 <1094400000>;
+            required-opps = <&cpr_opp1>;
+        };
+        opp-1248000000 {
+            opp-hz = /bits/ 64 <1248000000>;
+            required-opps = <&cpr_opp2>;
+        };
+        opp-1401600000 {
+            opp-hz = /bits/ 64 <1401600000>;
+            required-opps = <&cpr_opp3>;
+        };
+    };
+
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };
+
+    power-controller@b018000 {
+        compatible = "qcom,qcs404-cpr", "qcom,cpr";
+        reg = <0x0b018000 0x1000>;
+        interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&xo_board>;
+        clock-names = "ref";
+        vdd-apc-supply = <&pms405_s3>;
+        #power-domain-cells = <0>;
+        operating-points-v2 = <&cpr_opp_table>;
+        acc-syscon = <&tcsr>;
+
+        nvmem-cells = <&cpr_efuse_quot_offset1>,
+                      <&cpr_efuse_quot_offset2>,
+                      <&cpr_efuse_quot_offset3>,
+                      <&cpr_efuse_init_voltage1>,
+                      <&cpr_efuse_init_voltage2>,
+                      <&cpr_efuse_init_voltage3>,
+                      <&cpr_efuse_quot1>,
+                      <&cpr_efuse_quot2>,
+                      <&cpr_efuse_quot3>,
+                      <&cpr_efuse_ring1>,
+                      <&cpr_efuse_ring2>,
+                      <&cpr_efuse_ring3>,
+                      <&cpr_efuse_revision>;
+        nvmem-cell-names = "cpr0_quotient_offset1",
+                           "cpr0_quotient_offset2",
+                           "cpr0_quotient_offset3",
+                           "cpr0_init_voltage1",
+                           "cpr0_init_voltage2",
+                           "cpr0_init_voltage3",
+                           "cpr0_quotient1",
+                           "cpr0_quotient2",
+                           "cpr0_quotient3",
+                           "cpr0_ring_osc1",
+                           "cpr0_ring_osc2",
+                           "cpr0_ring_osc3",
+                           "cpr_fuse_revision";
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index f58dad1a1922..90f1db301fae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15490,7 +15490,7 @@ M:	Niklas Cassel <nks@flawful.org>
 L:	linux-pm@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
+F:	Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
 F:	drivers/soc/qcom/cpr.c
 
 QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v7 3/6] arm64: qcom: qcs404: Change CPR nvmem-names
  2021-09-01 15:57 [PATCH v7 0/6] Add support for Core Power Reduction v3, v4 and Hardened AngeloGioacchino Del Regno
  2021-09-01 15:57 ` [PATCH v7 1/6] soc: qcom: cpr: Move common functions to new file AngeloGioacchino Del Regno
  2021-09-01 15:57 ` [PATCH v7 2/6] dt-bindings: avs: cpr: Convert binding to YAML schema AngeloGioacchino Del Regno
@ 2021-09-01 15:57 ` AngeloGioacchino Del Regno
  2021-09-01 15:57 ` [PATCH v7 4/6] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened AngeloGioacchino Del Regno
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-01 15:57 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, lgirdwood, broonie, linux-arm-msm, devicetree,
	linux-kernel, phone-devel, konrad.dybcio, marijn.suijten,
	jami.kettunen, paul.bouchara, martin.botka,
	~postmarketos/upstreaming, jeffrey.l.hugo, robh,
	AngeloGioacchino Del Regno

The CPR driver's common functions were split and put in another
file in order to support newer CPR revisions: to simplify the
commonization, the expected names of the fuses had to be changed
in order for both new and old support to use the same fuse name
retrieval function and keeping the naming consistent.

The thread id was added to the fuse name and, since CPRv1 does
not support threads, it is expected to always read ID 0, which
means that the expected name here is now "cpr0_(fuse_name)"
instead of "cpr_(fuse_name)": luckily, QCS404 is the only user
so change it accordingly.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 339790ba585d..23e70f473da4 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1168,18 +1168,18 @@ cpr: power-controller@b018000 {
 				<&cpr_efuse_ring2>,
 				<&cpr_efuse_ring3>,
 				<&cpr_efuse_revision>;
-			nvmem-cell-names = "cpr_quotient_offset1",
-				"cpr_quotient_offset2",
-				"cpr_quotient_offset3",
-				"cpr_init_voltage1",
-				"cpr_init_voltage2",
-				"cpr_init_voltage3",
-				"cpr_quotient1",
-				"cpr_quotient2",
-				"cpr_quotient3",
-				"cpr_ring_osc1",
-				"cpr_ring_osc2",
-				"cpr_ring_osc3",
+			nvmem-cell-names = "cpr0_quotient_offset1",
+				"cpr0_quotient_offset2",
+				"cpr0_quotient_offset3",
+				"cpr0_init_voltage1",
+				"cpr0_init_voltage2",
+				"cpr0_init_voltage3",
+				"cpr0_quotient1",
+				"cpr0_quotient2",
+				"cpr0_quotient3",
+				"cpr0_ring_osc1",
+				"cpr0_ring_osc2",
+				"cpr0_ring_osc3",
 				"cpr_fuse_revision";
 		};
 
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v7 4/6] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened
  2021-09-01 15:57 [PATCH v7 0/6] Add support for Core Power Reduction v3, v4 and Hardened AngeloGioacchino Del Regno
                   ` (2 preceding siblings ...)
  2021-09-01 15:57 ` [PATCH v7 3/6] arm64: qcom: qcs404: Change CPR nvmem-names AngeloGioacchino Del Regno
@ 2021-09-01 15:57 ` AngeloGioacchino Del Regno
  2021-09-01 15:57 ` [PATCH v7 5/6] MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver AngeloGioacchino Del Regno
  2021-09-01 15:57 ` [PATCH v7 6/6] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver AngeloGioacchino Del Regno
  5 siblings, 0 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-01 15:57 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, lgirdwood, broonie, linux-arm-msm, devicetree,
	linux-kernel, phone-devel, konrad.dybcio, marijn.suijten,
	jami.kettunen, paul.bouchara, martin.botka,
	~postmarketos/upstreaming, jeffrey.l.hugo, robh,
	AngeloGioacchino Del Regno

This commit introduces a new driver, based on the one for cpr v1,
to enable support for the newer Qualcomm Core Power Reduction
hardware, known downstream as CPR3, CPR4 and CPRh, and support
for MSM8998 and SDM630 CPU power reduction.

In these new versions of the hardware, support for various new
features was introduced, including voltage reduction for the GPU,
security hardening and a new way of controlling CPU DVFS,
consisting in internal communication between microcontrollers,
specifically the CPR-Hardened and the Operating State Manager.

The CPR v3, v4 and CPRh are present in a broad range of SoCs,
from the mid-range to the high end ones including, but not limited
to, MSM8953/8996/8998, SDM630/636/660/845.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 drivers/soc/qcom/Kconfig      |   17 +
 drivers/soc/qcom/Makefile     |    1 +
 drivers/soc/qcom/cpr-common.c |   35 +-
 drivers/soc/qcom/cpr-common.h |    4 +
 drivers/soc/qcom/cpr3.c       | 2901 +++++++++++++++++++++++++++++++++
 include/soc/qcom/cpr.h        |   17 +
 6 files changed, 2969 insertions(+), 6 deletions(-)
 create mode 100644 drivers/soc/qcom/cpr3.c
 create mode 100644 include/soc/qcom/cpr.h

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 79b568f82a1c..ac520e5eeefa 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -42,6 +42,23 @@ config QCOM_CPR
 	  To compile this driver as a module, choose M here: the module will
 	  be called qcom-cpr
 
+config QCOM_CPR3
+	tristate "QCOM Core Power Reduction (CPR v3/v4/Hardened) support"
+	depends on ARCH_QCOM && HAS_IOMEM
+	select PM_OPP
+	select REGMAP
+	help
+	  Say Y here to enable support for the CPR hardware found on a broad
+	  variety of Qualcomm SoCs like MSM8996, MSM8998, SDM630, SDM660,
+	  SDM845 and others.
+
+	  This driver populates OPP tables and makes adjustments to them
+	  based on feedback from the CPR hardware. If you want to do CPU
+	  and/or GPU frequency scaling say Y here.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called qcom-cpr3
+
 config QCOM_GENI_SE
 	tristate "QCOM GENI Serial Engine Driver"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 8d1262a2e23c..87a165c0ea10 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_QCOM_AOSS_QMP) +=	qcom_aoss.o
 obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
 obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
 obj-$(CONFIG_QCOM_CPR)		+= cpr-common.o cpr.o
+obj-$(CONFIG_QCOM_CPR3)		+= cpr-common.o cpr3.o
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
 obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o
diff --git a/drivers/soc/qcom/cpr-common.c b/drivers/soc/qcom/cpr-common.c
index 41fcc5863e72..1390b5e1c6af 100644
--- a/drivers/soc/qcom/cpr-common.c
+++ b/drivers/soc/qcom/cpr-common.c
@@ -227,6 +227,29 @@ u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid)
 }
 EXPORT_SYMBOL_GPL(cpr_get_fuse_corner);
 
+void cpr_get_corner_post_vadj(struct dev_pm_opp *opp, u32 tid,
+			      s32 *open_loop, s32 *closed_loop)
+{
+	struct device_node *np;
+
+	/*
+	 * There is no of_property_read_s32_index, so we just store the
+	 * result into a s32 variable. After all, the OF API is doing
+	 * the exact same for of_property_read_s32...
+	 */
+	np = dev_pm_opp_get_of_node(opp);
+	if (of_property_read_u32_index(np, "qcom,opp-oloop-vadj", tid,
+				       open_loop))
+		*open_loop = 0;
+
+	if (of_property_read_u32_index(np, "qcom,opp-cloop-vadj", tid,
+				       closed_loop))
+		*closed_loop = 0;
+
+	of_node_put(np);
+}
+EXPORT_SYMBOL_GPL(cpr_get_corner_post_vadj);
+
 unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
 				     struct device *cpu_dev)
 {
@@ -268,11 +291,10 @@ int cpr_calculate_scaling(const char *quot_offset,
 			  const struct fuse_corner_data *fdata,
 			  const struct corner *corner)
 {
-	u32 quot_diff = 0;
-	unsigned long freq_diff;
-	int scaling;
+	u64 freq_diff;
 	const struct fuse_corner *fuse, *prev_fuse;
-	int ret;
+	u32 quot_diff;
+	int scaling, ret;
 
 	fuse = corner->fuse_corner;
 	prev_fuse = fuse - 1;
@@ -289,8 +311,9 @@ int cpr_calculate_scaling(const char *quot_offset,
 	}
 
 	freq_diff = fuse->max_freq - prev_fuse->max_freq;
-	freq_diff /= 1000000; /* Convert to MHz */
-	scaling = 1000 * quot_diff / freq_diff;
+	freq_diff = div_u64(freq_diff, 1000000); /* Convert to MHz */
+	scaling = 1000 * quot_diff;
+	do_div(scaling, freq_diff);
 	return min(scaling, fdata->max_quot_scale);
 }
 EXPORT_SYMBOL_GPL(cpr_calculate_scaling);
diff --git a/drivers/soc/qcom/cpr-common.h b/drivers/soc/qcom/cpr-common.h
index 54013b8a8e87..4eea8f7e0547 100644
--- a/drivers/soc/qcom/cpr-common.h
+++ b/drivers/soc/qcom/cpr-common.h
@@ -65,6 +65,8 @@ struct corner {
 struct corner_data {
 	unsigned int fuse_corner;
 	unsigned long freq;
+	int oloop_vadj;
+	int cloop_vadj;
 };
 
 struct acc_desc {
@@ -99,6 +101,8 @@ int cpr_populate_fuse_common(struct device *dev,
 int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
 			    struct corner *corners, int num_corners);
 u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid);
+void cpr_get_corner_post_vadj(struct dev_pm_opp *opp, u32 tid,
+			      s32 *open_loop, s32 *closed_loop);
 unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
 				     struct device *cpu_dev);
 int cpr_calculate_scaling(const char *quot_offset,
diff --git a/drivers/soc/qcom/cpr3.c b/drivers/soc/qcom/cpr3.c
new file mode 100644
index 000000000000..e22b3d9d86e8
--- /dev/null
+++ b/drivers/soc/qcom/cpr3.c
@@ -0,0 +1,2901 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2013-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019 Linaro Limited
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regulator/consumer.h>
+#include <linux/workqueue.h>
+#include <linux/clk.h>
+#include <linux/nvmem-consumer.h>
+#include <soc/qcom/cpr.h>
+#include "cpr-common.h"
+
+#define CPR3_RO_COUNT				16
+#define CPR3_RO_MASK				GENMASK(CPR3_RO_COUNT - 1, 0)
+
+/* CPR3 registers */
+#define CPR3_REG_CPR_VERSION			0x0
+#define CPRH_CPR_VERSION_4P5			0x40050000
+
+#define CPR3_REG_CPR_CTL			0x4
+#define CPR3_CPR_CTL_LOOP_EN_MASK		BIT(0)
+#define CPR3_CPR_CTL_IDLE_CLOCKS_MASK		GENMASK(5, 1)
+#define CPR3_CPR_CTL_IDLE_CLOCKS_SHIFT		1
+#define CPR3_CPR_CTL_COUNT_MODE_MASK		GENMASK(7, 6)
+#define CPR3_CPR_CTL_COUNT_MODE_SHIFT		6
+#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN	0
+#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MAX	1
+#define CPR3_CPR_CTL_COUNT_MODE_STAGGERED	2
+#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_AGE	3
+#define CPR3_CPR_CTL_COUNT_REPEAT_MASK		GENMASK(31, 9)
+#define CPR3_CPR_CTL_COUNT_REPEAT_SHIFT		9
+
+#define CPR3_REG_CPR_STATUS			0x8
+#define CPR3_CPR_STATUS_BUSY_MASK		BIT(0)
+
+/*
+ * This register is not present on controllers that support HW closed-loop
+ * except CPR4 APSS controller.
+ */
+#define CPR3_REG_CPR_TIMER_AUTO_CONT		0xC
+
+#define CPR3_REG_CPR_STEP_QUOT			0x14
+#define CPR3_CPR_STEP_QUOT_MIN_MASK		GENMASK(5, 0)
+#define CPR3_CPR_STEP_QUOT_MIN_SHIFT		0
+#define CPR3_CPR_STEP_QUOT_MAX_MASK		GENMASK(11, 6)
+#define CPR3_CPR_STEP_QUOT_MAX_SHIFT		6
+#define CPRH_DELTA_QUOT_STEP_FACTOR		4
+
+#define CPR3_REG_GCNT(ro)			(0xA0 + 0x4 * (ro))
+#define CPR3_REG_SENSOR_OWNER(sensor)		(0x200 + 0x4 * (sensor))
+
+#define CPR3_REG_CONT_CMD			0x800
+#define CPR3_CONT_CMD_ACK			0x1
+#define CPR3_CONT_CMD_NACK			0x0
+
+#define CPR3_REG_THRESH(thread)			(0x808 + 0x440 * (thread))
+#define CPR3_THRESH_CONS_DOWN_MASK		GENMASK(3, 0)
+#define CPR3_THRESH_CONS_DOWN_SHIFT		0
+#define CPR3_THRESH_CONS_UP_MASK		GENMASK(7, 4)
+#define CPR3_THRESH_CONS_UP_SHIFT		4
+#define CPR3_THRESH_DOWN_THRESH_MASK		GENMASK(12, 8)
+#define CPR3_THRESH_DOWN_THRESH_SHIFT		8
+#define CPR3_THRESH_UP_THRESH_MASK		GENMASK(17, 13)
+#define CPR3_THRESH_UP_THRESH_SHIFT		13
+
+#define CPR3_REG_RO_MASK(thread)		(0x80C + 0x440 * (thread))
+
+#define CPR3_REG_RESULT0(thread)		(0x810 + 0x440 * (thread))
+#define CPR3_RESULT0_BUSY_MASK			BIT(0)
+#define CPR3_RESULT0_STEP_DN_MASK		BIT(1)
+#define CPR3_RESULT0_STEP_UP_MASK		BIT(2)
+#define CPR3_RESULT0_ERROR_STEPS_MASK		GENMASK(7, 3)
+#define CPR3_RESULT0_ERROR_STEPS_SHIFT		3
+#define CPR3_RESULT0_ERROR_MASK			GENMASK(19, 8)
+#define CPR3_RESULT0_ERROR_SHIFT		8
+
+#define CPR3_REG_RESULT1(thread)		(0x814 + 0x440 * (thread))
+#define CPR3_RESULT1_QUOT_MIN_MASK		GENMASK(11, 0)
+#define CPR3_RESULT1_QUOT_MIN_SHIFT		0
+#define CPR3_RESULT1_QUOT_MAX_MASK		GENMASK(23, 12)
+#define CPR3_RESULT1_QUOT_MAX_SHIFT		12
+#define CPR3_RESULT1_RO_MIN_MASK		GENMASK(27, 24)
+#define CPR3_RESULT1_RO_MIN_SHIFT		24
+#define CPR3_RESULT1_RO_MAX_MASK		GENMASK(31, 28)
+#define CPR3_RESULT1_RO_MAX_SHIFT		28
+
+#define CPR3_REG_RESULT2(thread)		(0x818 + 0x440 * (thread))
+#define CPR3_RESULT2_STEP_QUOT_MIN_MASK		GENMASK(5, 0)
+#define CPR3_RESULT2_STEP_QUOT_MIN_SHIFT	0
+#define CPR3_RESULT2_STEP_QUOT_MAX_MASK		GENMASK(11, 6)
+#define CPR3_RESULT2_STEP_QUOT_MAX_SHIFT	6
+#define CPR3_RESULT2_SENSOR_MIN_MASK		GENMASK(23, 16)
+#define CPR3_RESULT2_SENSOR_MIN_SHIFT		16
+#define CPR3_RESULT2_SENSOR_MAX_MASK		GENMASK(31, 24)
+#define CPR3_RESULT2_SENSOR_MAX_SHIFT		24
+
+#define CPR3_REG_IRQ_EN				0x81C
+#define CPR3_REG_IRQ_CLEAR			0x820
+#define CPR3_REG_IRQ_STATUS			0x824
+#define CPR3_IRQ_UP				BIT(3)
+#define CPR3_IRQ_MID				BIT(2)
+#define CPR3_IRQ_DOWN				BIT(1)
+#define CPR3_IRQ_ALL				(CPR3_IRQ_UP | CPR3_IRQ_MID | CPR3_IRQ_DOWN)
+
+#define CPR3_REG_TARGET_QUOT(thread, ro)	(0x840 + 0x440 * (thread) + 0x4 * (ro))
+
+/* Registers found only on controllers that support HW closed-loop. */
+#define CPR3_REG_PD_THROTTLE			0xE8
+
+#define CPR3_REG_HW_CLOSED_LOOP_DISABLED	0x3000
+#define CPR3_REG_CPR_TIMER_MID_CONT		0x3004
+#define CPR3_REG_CPR_TIMER_UP_DN_CONT		0x3008
+
+/* CPR4 controller specific registers and bit definitions */
+#define CPR4_REG_CPR_TIMER_CLAMP			0x10
+#define CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN	BIT(27)
+
+#define CPR4_REG_MISC				0x700
+#define CPR4_MISC_RESET_STEP_QUOT_LOOP_EN	BIT(2)
+#define CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN	BIT(3)
+
+#define CPR4_REG_SAW_ERROR_STEP_LIMIT		0x7A4
+#define CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK	GENMASK(4, 0)
+#define CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT	0
+#define CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK	GENMASK(9, 5)
+#define CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT	5
+
+#define CPR4_REG_MARGIN_TEMP_CORE_TIMERS			0x7A8
+#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK	GENMASK(28, 18)
+#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHFT	18
+
+#define CPR4_REG_MARGIN_ADJ_CTL				0x7F8
+#define CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN		BIT(4)
+#define CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN		BIT(7)
+#define CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_MASK		GENMASK(16, 12)
+#define CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_SHIFT		12
+#define CPR4_MARGIN_ADJ_KV_MARGIN_ADJ_STEP_QUOT_MASK	GENMASK(31, 26)
+#define CPR4_MARGIN_ADJ_KV_MARGIN_ADJ_STEP_QUOT_SHIFT	26
+
+#define CPR4_REG_CPR_MASK_THREAD(thread)		(0x80C + 0x440 * (thread))
+#define CPR4_CPR_MASK_THREAD_DISABLE_THREAD		BIT(31)
+#define CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK	GENMASK(15, 0)
+
+/* CPRh controller specific registers and bit definitions */
+#define __CPRH_REG_CORNER(rbase, tbase, tid, cnum) (rbase + (tbase * tid) + (0x4 * cnum))
+#define CPRH_REG_CORNER(d, t, c) __CPRH_REG_CORNER(d->reg_corner, d->reg_corner_tid, t, c)
+
+#define CPRH_CTL_OSM_ENABLED			BIT(0)
+#define CPRH_CTL_BASE_VOLTAGE_MASK		GENMASK(10, 1)
+#define CPRH_CTL_BASE_VOLTAGE_SHIFT		1
+#define CPRH_CTL_MODE_SWITCH_DELAY_MASK		GENMASK(24, 17)
+#define CPRH_CTL_MODE_SWITCH_DELAY_SHIFT	17
+#define CPRH_CTL_VOLTAGE_MULTIPLIER_MASK	GENMASK(28, 25)
+#define CPRH_CTL_VOLTAGE_MULTIPLIER_SHIFT	25
+
+#define CPRH_CORNER_INIT_VOLTAGE_MASK		GENMASK(7, 0)
+#define CPRH_CORNER_INIT_VOLTAGE_SHIFT		0
+#define CPRH_CORNER_FLOOR_VOLTAGE_MASK		GENMASK(15, 8)
+#define CPRH_CORNER_FLOOR_VOLTAGE_SHIFT		8
+#define CPRH_CORNER_QUOT_DELTA_MASK		GENMASK(24, 16)
+#define CPRH_CORNER_QUOT_DELTA_SHIFT		16
+#define CPRH_CORNER_RO_SEL_MASK			GENMASK(28, 25)
+#define CPRH_CORNER_RO_SEL_SHIFT		25
+#define CPRH_CORNER_CPR_CL_DISABLE		BIT(29)
+
+#define CPRH_CORNER_INIT_VOLTAGE_MAX_VALUE	255
+#define CPRH_CORNER_FLOOR_VOLTAGE_MAX_VALUE	255
+#define CPRH_CORNER_QUOT_DELTA_MAX_VALUE	511
+
+enum cpr_type {
+	CTRL_TYPE_CPR3,
+	CTRL_TYPE_CPR4,
+	CTRL_TYPE_CPRH,
+	CTRL_TYPE_MAX,
+};
+
+/*
+ * struct cpr_thread_desc - CPR Thread-specific parameters
+ *
+ * @controller_id:      Identifier of the CPR controller expected by the HW
+ * @ro_scaling_factor:  Scaling factor for each ring oscillator entry
+ * @hw_tid:             Identifier of the CPR thread expected by the HW
+ * @init_voltage_step:  Voltage in uV for number of steps read from fuse array
+ * @init_voltage_width: Bit-width of the voltage read from the fuse array
+ * @sensor_range_start: First sensor ID used by a thread
+ * @sensor_range_end:   Last sensor ID used by a thread
+ * @num_fuse_corners:   Number of valid entries in fuse_corner_data
+ * @step_quot_init_min: Minimum achievable step quotient for this corner
+ * @step_quot_init_max: Maximum achievable step quotient for this corner
+ * @fuse_corner_data:   Parameters for calculation of each fuse corner
+ */
+struct cpr_thread_desc {
+	u8		controller_id;
+	u8		hw_tid;
+	const int	(*ro_scaling_factor)[CPR3_RO_COUNT];
+	int		ro_avail_corners;
+	int		init_voltage_step;
+	int		init_voltage_width;
+	u8		sensor_range_start;
+	u8		sensor_range_end;
+	u8		step_quot_init_min;
+	u8		step_quot_init_max;
+	unsigned int	num_fuse_corners;
+	struct fuse_corner_data *fuse_corner_data;
+};
+
+/*
+ * struct cpr_desc - Driver instance-wide CPR parameters
+ *
+ * @cpr_type:              Type (base version) of the CPR controller
+ * @num_threads:           Max. number of threads supported by this controller
+ * @timer_delay_us:        Loop delay time in uS
+ * @timer_updn_delay_us:   Voltage after-up/before-down delay time in uS
+ * @timer_cons_up:         Wait between consecutive up requests in uS
+ * @timer_cons_down:       Wait between consecutive down requests in uS
+ * @up_threshold:          Generic corner up threshold
+ * @down_threshold:        Generic corner down threshold
+ * @idle_clocks:           CPR Sensor: idle timer in cpr clocks unit
+ * @count_mode:            CPR Sensor: counting mode
+ * @count_repeat:          CPR Sensor: number of times to repeat reading
+ * @gcnt_us:               CPR measurement interval in uS
+ * @vreg_step_fixed:       Regulator voltage per step (if vreg unusable)
+ * @vreg_step_up_limit:    Num. of steps up at once before re-measuring sensors
+ * @vreg_step_down_limit:  Num. of steps dn at once before re-measuring sensors
+ * @vdd_settle_time_us:    Settling timer to account for one VDD supply step
+ * @corner_settle_time_us: Settle time for corner switch request
+ * @mem_acc_threshold:     Memory Accelerator (MEM-ACC) voltage threshold
+ * @apm_threshold:         Array Power Mux (APM) voltage threshold
+ * @apm_crossover:         Array Power Mux (APM) corner crossover voltage
+ * @apm_hysteresis:        Hysteresis for APM V-threshold related calculations
+ * @cpr_base_voltage:      Safety: Absolute minimum voltage (uV) on this CPR
+ * @cpr_max_voltage:       Safety: Absolute maximum voltage (uV) on this CPR
+ * @pd_throttle_val:       CPR Power Domain throttle during voltage switch
+ * @threads:               Array containing "CPR Thread" specific parameters
+ * @reduce_to_fuse_uV:     Reduce corner max volts (if higher) to fuse ceiling
+ * @reduce_to_corner_uV:   Reduce corner max volts (if higher) to corner ceil.
+ * @hw_closed_loop_en:     Enable CPR HW Closed-Loop voltage auto-adjustment
+ */
+struct cpr_desc {
+	enum cpr_type		cpr_type;
+	unsigned int		num_threads;
+	unsigned int		timer_delay_us;
+	u8			timer_updn_delay_us;
+	u8			timer_cons_up;
+	u8			timer_cons_down;
+	u8			up_threshold;
+	u8			down_threshold;
+	u8			idle_clocks;
+	u8			count_mode;
+	u8			count_repeat;
+	u8			gcnt_us;
+	u16			vreg_step_fixed;
+	u8			vreg_step_up_limit;
+	u8			vreg_step_down_limit;
+	u8			vdd_settle_time_us;
+	u8			corner_settle_time_us;
+	int			mem_acc_threshold;
+	int			apm_threshold;
+	int			apm_crossover;
+	int			apm_hysteresis;
+	u32			cpr_base_voltage;
+	u32			cpr_max_voltage;
+	u32			pd_throttle_val;
+
+	const struct cpr_thread_desc **threads;
+	bool reduce_to_fuse_uV;
+	bool reduce_to_corner_uV;
+	bool hw_closed_loop_en;
+};
+
+struct cpr_drv;
+struct cpr_thread {
+	int			num_corners;
+	int			id;
+	bool			enabled;
+	void __iomem		*base;
+	struct clk		*cpu_clk;
+	struct corner		*corner;
+	struct corner		*corners;
+	struct fuse_corner	*fuse_corners;
+	struct cpr_drv		*drv;
+	struct cpr_ext_data	ext_data;
+	struct generic_pm_domain pd;
+	struct device		*attached_cpu_dev;
+	struct work_struct	restart_work;
+	bool			restarting;
+
+	const struct cpr_fuse	*cpr_fuses;
+	const struct cpr_thread_desc *desc;
+};
+
+struct cpr_drv {
+	int			irq;
+	unsigned int		ref_clk_khz;
+	struct device		*dev;
+	struct mutex		lock;
+	struct regulator	*vreg;
+	struct regmap		*tcsr;
+	u32			gcnt;
+	u32			speed_bin;
+	u32			fusing_rev;
+	u32			last_uV;
+	u32			cpr_hw_rev;
+	u32			reg_corner;
+	u32			reg_corner_tid;
+	u32			reg_ctl;
+	u32			reg_status;
+	int			fuse_level_set;
+	int			extra_corners;
+	unsigned int		vreg_step;
+	bool			enabled;
+
+	struct cpr_thread	*threads;
+	struct genpd_onecell_data cell_data;
+
+	const struct cpr_desc	*desc;
+	const struct acc_desc	*acc_desc;
+	struct dentry		*debugfs;
+};
+
+/**
+ * cpr_get_ro_factor() - Get fuse corner ring oscillator factor
+ * @tdesc:  CPR Thread-specific parameters
+ * @fnum:   Fuse corner
+ * @ro_idx: Ring Oscillator fuse number
+ *
+ * Not all threads have different scaling factors for each
+ * Fuse Corner: if the RO factors are the same for all corners,
+ * then only one is specified, instead of uselessly repeating
+ * the same array for FC-times.
+ * This function checks for the same and gives back the right
+ * factor for the requested ring oscillator.
+ *
+ * Return: Ring oscillator factor
+ */
+static int cpr_get_ro_factor(const struct cpr_thread_desc *tdesc,
+			     int fnum, int ro_idx)
+{
+	int ro_fnum;
+
+	if (tdesc->ro_avail_corners == tdesc->num_fuse_corners)
+		ro_fnum = fnum;
+	else
+		ro_fnum = 0;
+
+	return tdesc->ro_scaling_factor[ro_fnum][ro_idx];
+}
+
+static void cpr_write(struct cpr_thread *thread, u32 offset, u32 value)
+{
+	writel(value, thread->base + offset);
+}
+
+static u32 cpr_read(struct cpr_thread *thread, u32 offset)
+{
+	return readl(thread->base + offset);
+}
+
+static void
+cpr_masked_write(struct cpr_thread *thread, u32 offset, u32 mask, u32 value)
+{
+	u32 val;
+
+	val = readl(thread->base + offset);
+	val &= ~mask;
+	val |= value & mask;
+	writel(val, thread->base + offset);
+}
+
+static void cpr_irq_clr(struct cpr_thread *thread)
+{
+	cpr_write(thread, CPR3_REG_IRQ_CLEAR, CPR3_IRQ_ALL);
+}
+
+static void cpr_irq_clr_nack(struct cpr_thread *thread)
+{
+	cpr_irq_clr(thread);
+	cpr_write(thread, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_NACK);
+}
+
+static void cpr_irq_clr_ack(struct cpr_thread *thread)
+{
+	cpr_irq_clr(thread);
+	cpr_write(thread, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_ACK);
+}
+
+static void cpr_irq_set(struct cpr_thread *thread, u32 int_bits)
+{
+	/* On CPR-hardened, interrupts are managed by and on firmware */
+	if (thread->drv->desc->cpr_type == CTRL_TYPE_CPRH)
+		return;
+
+	cpr_write(thread, CPR3_REG_IRQ_EN, int_bits);
+}
+
+/**
+ * cpr_ctl_enable() - Enable CPR thread
+ * @thread:     Structure holding CPR thread-specific parameters
+ */
+static void cpr_ctl_enable(struct cpr_thread *thread)
+{
+	if (thread->drv->enabled && !thread->restarting) {
+		cpr_masked_write(thread, CPR3_REG_CPR_CTL,
+				 CPR3_CPR_CTL_LOOP_EN_MASK,
+				 CPR3_CPR_CTL_LOOP_EN_MASK);
+	}
+}
+
+/**
+ * cpr_ctl_disable() - Disable CPR thread
+ * @thread:     Structure holding CPR thread-specific parameters
+ */
+static void cpr_ctl_disable(struct cpr_thread *thread)
+{
+	const struct cpr_desc *desc = thread->drv->desc;
+
+	if (desc->cpr_type != CTRL_TYPE_CPRH) {
+		cpr_irq_set(thread, 0);
+		cpr_irq_clr(thread);
+	}
+
+	cpr_masked_write(thread, CPR3_REG_CPR_CTL,
+			 CPR3_CPR_CTL_LOOP_EN_MASK, 0);
+}
+
+/**
+ * cpr_ctl_is_enabled() - Check if thread is enabled
+ * @thread:     Structure holding CPR thread-specific parameters
+ *
+ * Return: true if the CPR is enabled, false if it is disabled.
+ */
+static bool cpr_ctl_is_enabled(struct cpr_thread *thread)
+{
+	u32 reg_val;
+
+	reg_val = cpr_read(thread, CPR3_REG_CPR_CTL);
+	return reg_val & CPR3_CPR_CTL_LOOP_EN_MASK;
+}
+
+/**
+ * cpr_check_any_thread_busy() - Check if HW is done processing
+ * @thread:     Structure holding CPR thread-specific parameters
+ *
+ * Return: true if the CPR is busy, false if it is ready.
+ */
+static bool cpr_check_any_thread_busy(struct cpr_thread *thread)
+{
+	int i;
+
+	for (i = 0; i < thread->drv->desc->num_threads; i++)
+		if (cpr_read(thread, CPR3_REG_RESULT0(i)) &
+		    CPR3_RESULT0_BUSY_MASK)
+			return true;
+
+	return false;
+}
+
+static void cpr_restart_worker(struct work_struct *work)
+{
+	struct cpr_thread *thread = container_of(work, struct cpr_thread,
+						 restart_work);
+	struct cpr_drv *drv = thread->drv;
+	int i;
+
+	mutex_lock(&drv->lock);
+
+	thread->restarting = true;
+	cpr_ctl_disable(thread);
+	disable_irq(drv->irq);
+
+	mutex_unlock(&drv->lock);
+
+	for (i = 0; i < 20; i++) {
+		u32 cpr_status = cpr_read(thread, CPR3_REG_CPR_STATUS);
+		u32 ctl = cpr_read(thread, CPR3_REG_CPR_CTL);
+
+		if ((cpr_status & CPR3_CPR_STATUS_BUSY_MASK) &&
+		   !(ctl & CPR3_CPR_CTL_LOOP_EN_MASK))
+			break;
+
+		udelay(10);
+	}
+
+	cpr_irq_clr(thread);
+
+	for (i = 0; i < 20; i++) {
+		u32 status = cpr_read(thread, CPR3_REG_IRQ_STATUS);
+
+		if (!(status & CPR3_IRQ_ALL))
+			break;
+		udelay(10);
+	}
+
+	mutex_lock(&drv->lock);
+
+	thread->restarting = false;
+	enable_irq(drv->irq);
+	cpr_ctl_enable(thread);
+
+	mutex_unlock(&drv->lock);
+}
+
+/**
+ * cpr_corner_restore() - Restore saved corner level
+ * @thread: Structure holding CPR thread-specific parameters
+ * @corner: Structure holding the saved corner level
+ */
+static void cpr_corner_restore(struct cpr_thread *thread,
+			       struct corner *corner)
+{
+	struct cpr_drv *drv = thread->drv;
+	struct fuse_corner *fuse = corner->fuse_corner;
+	const struct cpr_thread_desc *tdesc = thread->desc;
+	u32 ro_sel = fuse->ring_osc_idx;
+
+	cpr_write(thread, CPR3_REG_GCNT(ro_sel), drv->gcnt);
+
+	cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid),
+		  CPR3_RO_MASK & ~BIT(ro_sel));
+
+	cpr_write(thread, CPR3_REG_TARGET_QUOT(tdesc->hw_tid, ro_sel),
+		  fuse->quot - corner->quot_adjust);
+
+	if (drv->desc->cpr_type == CTRL_TYPE_CPR4) {
+		cpr_masked_write(thread,
+				 CPR4_REG_CPR_MASK_THREAD(tdesc->hw_tid),
+				 CPR4_CPR_MASK_THREAD_DISABLE_THREAD |
+				 CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, 0);
+	}
+
+	thread->corner = corner;
+	corner->last_uV = corner->uV;
+}
+
+/**
+ * cpr_set_acc() - Set fuse level to the mem-acc
+ * @drv: Main driver structure
+ * @f:   Fuse level
+ */
+static void cpr_set_acc(struct cpr_drv *drv, int f)
+{
+	const struct acc_desc *desc = drv->acc_desc;
+	struct reg_sequence *s = desc->settings;
+	int n = desc->num_regs_per_fuse;
+
+	if (!s || f == drv->fuse_level_set)
+		return;
+
+	regmap_multi_reg_write(drv->tcsr, s + (n * f), n);
+	drv->fuse_level_set = f;
+}
+
+/**
+ * cpr_pre_voltage() - Actions to execute before setting voltage
+ * @thread:     Structure holding CPR thread-specific parameters
+ * @dir:        Enumeration for voltage change direction
+ * @fuse_level: Fuse corner for mem-acc, if supported.
+ *
+ * Return: Zero for success or negative number on errors.
+ */
+static int cpr_pre_voltage(struct cpr_thread *thread,
+			   enum voltage_change_dir dir,
+			   int fuse_level)
+{
+	struct cpr_drv *drv = thread->drv;
+
+	if (drv->desc->cpr_type == CTRL_TYPE_CPR3 &&
+	    drv->desc->pd_throttle_val)
+		cpr_write(thread, CPR3_REG_PD_THROTTLE,
+			  drv->desc->pd_throttle_val);
+
+	if (drv->tcsr && dir == DOWN)
+		cpr_set_acc(drv, fuse_level);
+
+	return 0;
+}
+
+/**
+ * cpr_post_voltage() - Actions to execute after setting voltage
+ * @thread:     Structure holding CPR thread-specific parameters
+ * @dir:        Enumeration for voltage change direction
+ * @fuse_level: Fuse corner for mem-acc, if supported.
+ *
+ * Return: Zero for success or negative number on errors.
+ */
+static int cpr_post_voltage(struct cpr_thread *thread,
+			    enum voltage_change_dir dir,
+			    int fuse_level)
+{
+	struct cpr_drv *drv = thread->drv;
+
+	if (drv->tcsr && dir == UP)
+		cpr_set_acc(drv, fuse_level);
+
+	if (drv->desc->cpr_type == CTRL_TYPE_CPR3)
+		cpr_write(thread, CPR3_REG_PD_THROTTLE, 0);
+
+	return 0;
+}
+
+/**
+ * cpr_commit_state() - Set the newly requested voltage
+ * @thread:     Structure holding CPR thread-specific parameters
+ *
+ * Return: IRQ_SUCCESS for success, IRQ_NONE if the CPR is disabled.
+ */
+static int cpr_commit_state(struct cpr_thread *thread)
+{
+	struct cpr_drv *drv = thread->drv;
+	int min_uV = 0, max_uV = 0, new_uV = 0, fuse_level = 0;
+	enum voltage_change_dir dir;
+	u32 next_irqmask = 0;
+	int ret, i;
+
+	/* On CPRhardened, control states are managed in firmware */
+	if (drv->desc->cpr_type == CTRL_TYPE_CPRH)
+		return 0;
+
+	for (i = 0; i < drv->desc->num_threads; i++) {
+		struct cpr_thread *thread = &drv->threads[i];
+
+		if (!thread->corner)
+			continue;
+
+		fuse_level = max(fuse_level,
+				 (int) (thread->corner->fuse_corner -
+				 &thread->fuse_corners[0]));
+
+		max_uV = max(max_uV, thread->corner->max_uV);
+		min_uV = max(min_uV, thread->corner->min_uV);
+		new_uV = max(new_uV, thread->corner->last_uV);
+	}
+	dev_vdbg(drv->dev, "%s: new uV: %d, last uV: %d\n",
+		 __func__, new_uV, drv->last_uV);
+
+	/*
+	 * Safety measure: if the voltage is out of the globally allowed
+	 * range, then go out and warn the user.
+	 * This should *never* happen.
+	 */
+	if (new_uV > drv->desc->cpr_max_voltage ||
+	    new_uV < drv->desc->cpr_base_voltage) {
+		dev_warn(drv->dev, "Voltage (%u uV) out of range.", new_uV);
+		return -EINVAL;
+	}
+
+	if (new_uV == drv->last_uV || fuse_level == drv->fuse_level_set)
+		goto out;
+
+	if (fuse_level > drv->fuse_level_set)
+		dir = UP;
+	else
+		dir = DOWN;
+
+	ret = cpr_pre_voltage(thread, fuse_level, dir);
+	if (ret)
+		return ret;
+
+	dev_vdbg(drv->dev, "setting voltage: %d\n", new_uV);
+
+	ret = regulator_set_voltage(drv->vreg, new_uV, new_uV);
+	if (ret) {
+		dev_err_ratelimited(drv->dev, "failed to set voltage %d: %d\n", new_uV, ret);
+		return ret;
+	}
+
+	ret = cpr_post_voltage(thread, fuse_level, dir);
+	if (ret)
+		return ret;
+
+	drv->last_uV = new_uV;
+out:
+	if (new_uV > min_uV)
+		next_irqmask |= CPR3_IRQ_DOWN;
+	if (new_uV < max_uV)
+		next_irqmask |= CPR3_IRQ_UP;
+
+	cpr_irq_set(thread, next_irqmask);
+
+	return 0;
+}
+
+static unsigned int cpr_get_cur_perf_state(struct cpr_thread *thread)
+{
+	return thread->corner ? thread->corner - thread->corners + 1 : 0;
+}
+
+/**
+ * cpr_scale() - Calculate new voltage for the received direction
+ * @thread: Structure holding CPR thread-specific parameters
+ * @dir:    Enumeration for voltage change direction
+ *
+ * The CPR scales one by one: this function calculates the new
+ * voltage to set when a voltage-UP or voltage-DOWN request comes
+ * and stores it into the per-thread structure that gets passed.
+ */
+static void cpr_scale(struct cpr_thread *thread, enum voltage_change_dir dir)
+{
+	struct cpr_drv *drv = thread->drv;
+	const struct cpr_thread_desc *tdesc = thread->desc;
+	u32 val, error_steps;
+	int last_uV, new_uV;
+	struct corner *corner;
+
+	if (dir != UP && dir != DOWN)
+		return;
+
+	corner = thread->corner;
+	val = cpr_read(thread, CPR3_REG_RESULT0(tdesc->hw_tid));
+	error_steps = val >> CPR3_RESULT0_ERROR_STEPS_SHIFT;
+	error_steps &= CPR3_RESULT0_ERROR_STEPS_MASK;
+
+	last_uV = corner->last_uV;
+
+	if (dir == UP) {
+		if (!(val & CPR3_RESULT0_STEP_UP_MASK))
+			return;
+
+		/* Calculate new voltage */
+		new_uV = last_uV + drv->vreg_step;
+		new_uV = min(new_uV, corner->max_uV);
+
+		dev_vdbg(drv->dev, "[T%u] UP - new_uV=%d last_uV=%d p-state=%u st=%u\n",
+			thread->id, new_uV, last_uV,
+			cpr_get_cur_perf_state(thread), error_steps);
+	} else {
+		if (!(val & CPR3_RESULT0_STEP_DN_MASK))
+			return;
+
+		/* Calculate new voltage */
+		new_uV = last_uV - drv->vreg_step;
+		new_uV = max(new_uV, corner->min_uV);
+		dev_vdbg(drv->dev, "[T%u] DOWN - new_uV=%d last_uV=%d p-state=%u st=%u\n",
+			thread->id, new_uV, last_uV,
+			cpr_get_cur_perf_state(thread), error_steps);
+	}
+	corner->last_uV = new_uV;
+}
+
+/**
+ * cpr_irq_handler() - Handle CPR3/CPR4 status interrupts
+ * @irq: Number of the interrupt
+ * @dev: Pointer to the cpr_thread structure
+ *
+ * Handle the interrupts coming from non-hardened CPR HW as to get
+ * an ok to scale voltages immediately, or to pass error status to
+ * the hardware (either success/ACK or failure/NACK).
+ *
+ * Return: IRQ_SUCCESS for success, IRQ_NONE if the CPR is disabled.
+ */
+static irqreturn_t cpr_irq_handler(int irq, void *dev)
+{
+	struct cpr_thread *thread = dev;
+	struct cpr_drv *drv = thread->drv;
+	irqreturn_t ret = IRQ_HANDLED;
+	int i, rc;
+	enum voltage_change_dir dir = NO_CHANGE;
+	u32 val;
+
+	mutex_lock(&drv->lock);
+
+	val = cpr_read(thread, CPR3_REG_IRQ_STATUS);
+
+	dev_vdbg(drv->dev, "IRQ_STATUS = %#02x\n", val);
+
+	if (!cpr_ctl_is_enabled(thread)) {
+		dev_vdbg(drv->dev, "CPR is disabled\n");
+		ret = IRQ_NONE;
+	} else if (cpr_check_any_thread_busy(thread)) {
+		cpr_irq_clr_nack(thread);
+		dev_dbg(drv->dev, "CPR measurement is not ready\n");
+	} else {
+		/*
+		 * Following sequence of handling is as per each IRQ's
+		 * priority
+		 */
+		if (val & CPR3_IRQ_UP)
+			dir = UP;
+		else if (val & CPR3_IRQ_DOWN)
+			dir = DOWN;
+
+		if (dir != NO_CHANGE) {
+			for (i = 0; i < drv->desc->num_threads; i++) {
+				thread = &drv->threads[i];
+				cpr_scale(thread, dir);
+			}
+
+			rc = cpr_commit_state(thread);
+			if (rc)
+				cpr_irq_clr_nack(thread);
+			else
+				cpr_irq_clr_ack(thread);
+		} else if (val & CPR3_IRQ_MID) {
+			dev_dbg(drv->dev, "IRQ occurred for Mid Flag\n");
+		} else {
+			dev_warn(drv->dev, "IRQ occurred for unknown flag (%#08x)\n", val);
+			schedule_work(&thread->restart_work);
+		}
+	}
+
+	mutex_unlock(&drv->lock);
+
+	return ret;
+}
+
+static int cpr_switch(struct cpr_drv *drv)
+{
+	int i, ret;
+	bool enabled = false;
+
+	if (drv->desc->cpr_type == CTRL_TYPE_CPRH)
+		return 0;
+
+	for (i = 0; i < drv->desc->num_threads && !enabled; i++)
+		enabled = drv->threads[i].enabled;
+
+	dev_vdbg(drv->dev, "%s: enabled = %d\n", __func__, enabled);
+
+	if (enabled == drv->enabled)
+		return 0;
+
+	if (enabled) {
+		ret = regulator_enable(drv->vreg);
+		if (ret)
+			return ret;
+
+		drv->enabled = enabled;
+
+		for (i = 0; i < drv->desc->num_threads; i++)
+			if (drv->threads[i].corner)
+				break;
+
+		if (i < drv->desc->num_threads) {
+			cpr_irq_clr(&drv->threads[i]);
+
+			cpr_commit_state(&drv->threads[i]);
+			cpr_ctl_enable(&drv->threads[i]);
+		}
+	} else {
+		for (i = 0; i < drv->desc->num_threads && !enabled; i++)
+			cpr_ctl_disable(&drv->threads[i]);
+
+		drv->enabled = enabled;
+
+		ret = regulator_disable(drv->vreg);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * cpr_enable() - Enables a CPR thread
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * Return: Zero for success or negative number on errors.
+ */
+static int cpr_enable(struct cpr_thread *thread)
+{
+	struct cpr_drv *drv = thread->drv;
+	int ret;
+
+	dev_dbg(drv->dev, "Enabling thread %d\n", thread->id);
+
+	mutex_lock(&drv->lock);
+
+	thread->enabled = true;
+	ret = cpr_switch(thread->drv);
+
+	mutex_unlock(&drv->lock);
+
+	return ret;
+}
+
+/**
+ * cpr_disable() - Disables a CPR thread
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * Return: Zero for success or negative number on errors.
+ */
+static int cpr_disable(struct cpr_thread *thread)
+{
+	struct cpr_drv *drv = thread->drv;
+	int ret;
+
+	dev_dbg(drv->dev, "Disabling thread %d\n", thread->id);
+
+	mutex_lock(&drv->lock);
+
+	thread->enabled = false;
+	ret = cpr_switch(thread->drv);
+
+	mutex_unlock(&drv->lock);
+
+	return ret;
+}
+
+/**
+ * cpr_configure() - Configure main HW parameters
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * This function configures the main CPR hardware parameters, such as
+ * internal timers (and delays), sensor ownerships, activates and/or
+ * deactivates cpr-threads and others, as one sequence for all of the
+ * versions supported in this driver. By design, the function may
+ * return a success earlier if the sequence for "a previous version"
+ * has ended.
+ *
+ * Context: The CPR must be clocked before calling this function!
+ *
+ * Return: Zero for success or negative number on errors.
+ */
+static int cpr_configure(struct cpr_thread *thread)
+{
+	struct cpr_drv *drv = thread->drv;
+	const struct cpr_desc *desc = drv->desc;
+	const struct cpr_thread_desc *tdesc = thread->desc;
+	u32 val;
+	int i;
+
+	/* Disable interrupt and CPR */
+	cpr_irq_set(thread, 0);
+	cpr_write(thread, CPR3_REG_CPR_CTL, 0);
+
+	/* Init and save gcnt */
+	drv->gcnt = drv->ref_clk_khz * desc->gcnt_us;
+	do_div(drv->gcnt, 1000);
+
+	/* Program the delay count for the timer */
+	val = drv->ref_clk_khz * desc->timer_delay_us;
+	do_div(val, 1000);
+	if (desc->cpr_type == CTRL_TYPE_CPR3) {
+		cpr_write(thread, CPR3_REG_CPR_TIMER_MID_CONT, val);
+
+		val = drv->ref_clk_khz * desc->timer_updn_delay_us;
+		do_div(val, 1000);
+		cpr_write(thread, CPR3_REG_CPR_TIMER_UP_DN_CONT, val);
+	} else {
+		cpr_write(thread, CPR3_REG_CPR_TIMER_AUTO_CONT, val);
+	}
+	dev_dbg(drv->dev, "Timer count: %#0x (for %d us)\n", val,
+		desc->timer_delay_us);
+
+	/* Program the control register */
+	val = desc->idle_clocks << CPR3_CPR_CTL_IDLE_CLOCKS_SHIFT;
+	val |= desc->count_mode << CPR3_CPR_CTL_COUNT_MODE_SHIFT;
+	val |= desc->count_repeat << CPR3_CPR_CTL_COUNT_REPEAT_SHIFT;
+	cpr_write(thread, CPR3_REG_CPR_CTL, val);
+
+	/* Configure CPR default step quotients */
+	val = tdesc->step_quot_init_min << CPR3_CPR_STEP_QUOT_MIN_SHIFT;
+	val |= tdesc->step_quot_init_max << CPR3_CPR_STEP_QUOT_MAX_SHIFT;
+
+	cpr_write(thread, CPR3_REG_CPR_STEP_QUOT, val);
+
+	/*
+	 * Configure the CPR sensor ownership always on thread 0
+	 * TODO: SDM845 has different ownership for sensors!!
+	 */
+	for (i = tdesc->sensor_range_start; i < tdesc->sensor_range_end; i++)
+		cpr_write(thread, CPR3_REG_SENSOR_OWNER(i), 0);
+
+	/* Program Consecutive Up & Down */
+	val = desc->timer_cons_up << CPR3_THRESH_CONS_UP_SHIFT;
+	val |= desc->timer_cons_down << CPR3_THRESH_CONS_DOWN_SHIFT;
+	val |= desc->up_threshold << CPR3_THRESH_UP_THRESH_SHIFT;
+	val |= desc->down_threshold << CPR3_THRESH_DOWN_THRESH_SHIFT;
+	cpr_write(thread, CPR3_REG_THRESH(tdesc->hw_tid), val);
+
+	/* Mask all ring oscillators for all threads initially */
+	cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid), CPR3_RO_MASK);
+
+	/* HW Closed-loop control */
+	if (desc->cpr_type == CTRL_TYPE_CPR3) {
+		cpr_write(thread, CPR3_REG_HW_CLOSED_LOOP_DISABLED,
+			  !desc->hw_closed_loop_en);
+	} else {
+		cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL,
+				CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN,
+				desc->hw_closed_loop_en ?
+				CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN : 0);
+	}
+
+	/* Additional configuration for CPR4 and beyond */
+	if (desc->cpr_type < CTRL_TYPE_CPR4)
+		return 0;
+
+	/* Disable threads initially only on non-hardened CPR4 */
+	if (desc->cpr_type == CTRL_TYPE_CPR4) {
+		cpr_masked_write(thread, CPR4_REG_CPR_MASK_THREAD(1),
+				CPR4_CPR_MASK_THREAD_DISABLE_THREAD |
+				CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK,
+				CPR4_CPR_MASK_THREAD_DISABLE_THREAD |
+				CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK);
+	}
+
+	if (tdesc->hw_tid > 0) {
+		cpr_masked_write(thread, CPR4_REG_MISC,
+				 CPR4_MISC_RESET_STEP_QUOT_LOOP_EN |
+				 CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN,
+				 CPR4_MISC_RESET_STEP_QUOT_LOOP_EN |
+				 CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN);
+	}
+
+	val = drv->vreg_step;
+	do_div(val, 1000);
+	cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL,
+			 CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_MASK,
+			 val << CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_SHIFT);
+
+	cpr_masked_write(thread, CPR4_REG_SAW_ERROR_STEP_LIMIT,
+			 CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK,
+			 desc->vreg_step_down_limit <<
+			 CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT);
+
+	cpr_masked_write(thread, CPR4_REG_SAW_ERROR_STEP_LIMIT,
+			 CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK,
+			 desc->vreg_step_up_limit <<
+			 CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT);
+
+	cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL,
+			 CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN,
+			 CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN);
+
+	if (tdesc->hw_tid > 0) {
+		cpr_masked_write(thread, CPR4_REG_CPR_TIMER_CLAMP,
+				 CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN,
+				 CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN);
+	}
+
+	/* Settling timer to account for one VDD supply step */
+	if (desc->vdd_settle_time_us > 0) {
+		u32 m = CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK;
+		u32 s = CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHFT;
+
+		cpr_masked_write(thread, CPR4_REG_MARGIN_TEMP_CORE_TIMERS,
+				 m, desc->vdd_settle_time_us << s);
+	}
+
+	/* Additional configuration for CPR-hardened */
+	if (desc->cpr_type < CTRL_TYPE_CPRH)
+		return 0;
+
+	/* Settling timer to account for one corner-switch request */
+	if (desc->corner_settle_time_us > 0) {
+		cpr_masked_write(thread, drv->reg_ctl,
+				 CPRH_CTL_MODE_SWITCH_DELAY_MASK,
+				 desc->corner_settle_time_us <<
+				 CPRH_CTL_MODE_SWITCH_DELAY_SHIFT);
+	}
+
+	/* Base voltage and multiplier values for CPRh internal calculations */
+	cpr_masked_write(thread, drv->reg_ctl,
+			 CPRH_CTL_BASE_VOLTAGE_MASK,
+			 (DIV_ROUND_UP(desc->cpr_base_voltage,
+				       drv->vreg_step) <<
+			  CPRH_CTL_BASE_VOLTAGE_SHIFT));
+
+	cpr_masked_write(thread, drv->reg_ctl,
+			 CPRH_CTL_VOLTAGE_MULTIPLIER_MASK,
+			 DIV_ROUND_UP(drv->vreg_step, 1000) <<
+			 CPRH_CTL_VOLTAGE_MULTIPLIER_SHIFT);
+
+	return 0;
+}
+
+
+static int cprh_dummy_set_performance_state(struct generic_pm_domain *domain,
+					    unsigned int state)
+{
+	return 0;
+}
+
+static int cpr_set_performance_state(struct generic_pm_domain *domain,
+				     unsigned int state)
+{
+	struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd);
+	struct cpr_drv *drv = thread->drv;
+	struct corner *corner, *end;
+	int ret = 0;
+
+	mutex_lock(&drv->lock);
+
+	dev_dbg(drv->dev, "setting perf state: %u (prev state: %u thread: %u)\n",
+		state, cpr_get_cur_perf_state(thread), thread->id);
+
+	/*
+	 * Determine new corner we're going to.
+	 * Remove one since lowest performance state is 1.
+	 */
+	corner = thread->corners + state - 1;
+	end = &thread->corners[thread->num_corners - 1];
+	if (corner > end || corner < thread->corners) {
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	cpr_ctl_disable(thread);
+
+	cpr_irq_clr(thread);
+	if (thread->corner != corner)
+		cpr_corner_restore(thread, corner);
+
+	ret = cpr_commit_state(thread);
+	if (ret)
+		goto unlock;
+
+	cpr_ctl_enable(thread);
+unlock:
+	mutex_unlock(&drv->lock);
+
+	dev_dbg(drv->dev, "set perf state %u on thread %u\n", state, thread->id);
+
+	return ret;
+}
+
+/**
+ * cpr3_adjust_quot - Adjust the closed-loop quotients
+ * @ring_osc_factor:  Ring oscillator adjustment factor
+ * @volt_closed_loop: Closed-loop voltage adjustment factor
+ *
+ * Calculates the quotient adjustment factor based on closed-loop
+ * quotients and ring oscillator factor.
+ *
+ * Return: Adjusted quotient
+ */
+static int cpr3_adjust_quot(int ring_osc_factor, int volt_closed_loop)
+{
+	s64 temp;
+
+	if (ring_osc_factor == 0 || volt_closed_loop == 0)
+		return 0;
+
+	temp = (s64)(ring_osc_factor * volt_closed_loop);
+	return (int)div_s64(temp, 1000000);
+}
+
+/**
+ * cpr_fuse_corner_init() - Calculate fuse corner table
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * This function populates the fuse corners table by reading the
+ * values from the fuses, eventually adjusting them with a fixed
+ * per-corner offset and doing basic checks about them being
+ * supported by the regulator that is assigned to this CPR - if
+ * it is available (on CPR-Hardened, there is no usable vreg, as
+ * that is protected by the hypervisor).
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr_fuse_corner_init(struct cpr_thread *thread)
+{
+	struct cpr_drv *drv = thread->drv;
+	const struct cpr_thread_desc *desc = thread->desc;
+	const struct cpr_fuse *cpr_fuse = thread->cpr_fuses;
+	struct fuse_corner_data *fdata;
+	struct fuse_corner *fuse, *prev_fuse, *end;
+	int i, ret;
+
+	/* Populate fuse_corner members */
+	fuse = thread->fuse_corners;
+	prev_fuse = &fuse[0];
+	end = &fuse[desc->num_fuse_corners - 1];
+	fdata = desc->fuse_corner_data;
+
+	for (i = 0; fuse <= end; fuse++, cpr_fuse++, i++, fdata++) {
+		int factor = cpr_get_ro_factor(desc, i, fuse->ring_osc_idx);
+
+		ret = cpr_populate_fuse_common(drv->dev, fdata, cpr_fuse,
+					       fuse, drv->vreg_step,
+					       desc->init_voltage_width,
+					       desc->init_voltage_step);
+		if (ret)
+			return ret;
+
+		/*
+		 * Adjust the fuse quot with per-fuse-corner closed-loop
+		 * voltage adjustment parameters.
+		 */
+		fuse->quot += cpr3_adjust_quot(factor, fdata->volt_cloop_adjust);
+
+		/* CPRh: no regulator access... */
+		if (drv->desc->cpr_type == CTRL_TYPE_CPRH)
+			goto skip_pvs_restrict;
+
+		/* Re-check if corner voltage range is supported by regulator */
+		ret = cpr_check_vreg_constraints(drv->dev, drv->vreg, fuse);
+		if (ret)
+			return ret;
+
+skip_pvs_restrict:
+		if (fuse->uV < prev_fuse->uV)
+			fuse->uV = prev_fuse->uV;
+		prev_fuse = fuse;
+		dev_dbg(drv->dev, "fuse corner %d: [%d %d %d] RO%hhu quot %d\n",
+			i, fuse->min_uV, fuse->uV, fuse->max_uV,
+			fuse->ring_osc_idx, fuse->quot);
+
+		/* Check if constraints are valid */
+		if (fuse->uV < fuse->min_uV || fuse->uV > fuse->max_uV) {
+			dev_err(drv->dev, "fuse corner %d: Bad voltage range.\n", i);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static void cpr3_restrict_corner(struct corner *corner, int threshold,
+				 int hysteresis, int step)
+{
+	if (threshold > corner->min_uV && threshold <= corner->max_uV) {
+		if (corner->uV >= threshold) {
+			corner->min_uV = max(corner->min_uV,
+					     threshold - hysteresis);
+			if (corner->min_uV > corner->uV)
+				corner->uV = corner->min_uV;
+		} else {
+			corner->max_uV = threshold;
+			corner->max_uV -= step;
+		}
+	}
+}
+
+/*
+ * cprh_corner_adjust_opps() - Set voltage on each CPU OPP table entry
+ *
+ * On CPR-Hardened, the voltage level is controlled internally through
+ * the OSM hardware: in order to initialize the latter, we have to
+ * communicate the voltage to its driver, so that it will be able to
+ * write the right parameters (as they have to be set both on the CPRh
+ * and on the OSM) on it.
+ * This function is called only for CPRh.
+ *
+ * Return: Zero for success, negative number for error.
+ */
+static int cprh_corner_adjust_opps(struct cpr_thread *thread)
+{
+	struct corner *corner = thread->corners;
+	struct cpr_drv *drv = thread->drv;
+	int i, ret;
+
+	for (i = 0; i < thread->num_corners; i++) {
+		ret = dev_pm_opp_adjust_voltage(thread->attached_cpu_dev,
+						corner[i].freq,
+						corner[i].uV,
+						corner[i].min_uV,
+						corner[i].max_uV);
+		if (ret)
+			break;
+
+		dev_dbg(drv->dev, "OPP voltage adjusted for %lu kHz, %d uV\n",
+			corner[i].freq, corner[i].uV);
+	}
+
+	/* If we couldn't adjust voltage for all corners, something went wrong */
+	if (i < thread->num_corners)
+		return -EINVAL;
+
+	return ret;
+}
+
+/**
+ * cpr3_corner_init() - Calculate and set-up corners for the CPR HW
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * This function calculates all the corner parameters by comparing
+ * and interpolating the values read from the various set-points
+ * read from the fuses (also called "fuse corners") to generate and
+ * program to the CPR a lookup table that describes each voltage
+ * step, mapped to a performance level (or corner number).
+ *
+ * It also programs other essential parameters on the CPR and - if
+ * we are dealing with CPR-Hardened, it will also enable the internal
+ * interface between the Operating State Manager (OSM) and the CPRh
+ * in order to achieve CPU DVFS.
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr3_corner_init(struct cpr_thread *thread)
+{
+	struct cpr_drv *drv = thread->drv;
+	const struct cpr_desc *desc = drv->desc;
+	const struct cpr_thread_desc *tdesc = thread->desc;
+	const struct cpr_fuse *fuses = thread->cpr_fuses;
+	int i, ret, total_corners, extra_corners, level, scaling = 0;
+	unsigned int fnum, fc;
+	const char *quot_offset;
+	const struct fuse_corner_data *fdata;
+	struct fuse_corner *fuse, *prev_fuse;
+	struct corner *corner, *prev_corner, *end;
+	struct corner_data *cdata;
+	struct dev_pm_opp *opp;
+	unsigned long freq;
+	u32 ring_osc_mask = CPR3_RO_MASK, min_quotient = U32_MAX;
+
+	corner = thread->corners;
+	prev_corner = &thread->corners[0];
+	end = &corner[thread->num_corners - 1];
+
+	cdata = devm_kcalloc(drv->dev, thread->num_corners + drv->extra_corners,
+			     sizeof(struct corner_data), GFP_KERNEL);
+	if (!cdata)
+		return -ENOMEM;
+
+	for (level = 1; level <= thread->num_corners; level++) {
+		opp = dev_pm_opp_find_level_exact(&thread->pd.dev, level);
+		if (IS_ERR(opp))
+			return -EINVAL;
+
+		/*
+		 * If there is only one specified qcom,opp-fuse-level, then
+		 * it is assumed that this only one is global and valid for
+		 * all IDs, so try to get the specific one but, on failure,
+		 * go for the global one.
+		 */
+		fc = cpr_get_fuse_corner(opp, thread->id);
+		if (fc == 0) {
+			fc = cpr_get_fuse_corner(opp, 0);
+			if (fc == 0) {
+				dev_err(drv->dev, "qcom,opp-fuse-level is missing!\n");
+				dev_pm_opp_put(opp);
+				return -EINVAL;
+			}
+		}
+		fnum = fc - 1;
+
+		freq = cpr_get_opp_hz_for_req(opp, thread->attached_cpu_dev);
+		if (!freq) {
+			thread->num_corners = max(level - 1, 0);
+			end = &thread->corners[thread->num_corners - 1];
+			break;
+		}
+
+		/*
+		 * If any post-vadj (open/closed loop) is not specified, then
+		 * it's zero, meaning that it is not required for this corner.
+		 */
+		cpr_get_corner_post_vadj(opp, thread->id,
+					 &cdata[level - 1].oloop_vadj,
+					 &cdata[level - 1].cloop_vadj);
+		cdata[level - 1].fuse_corner = fnum;
+		cdata[level - 1].freq = freq;
+
+		fuse = &thread->fuse_corners[fnum];
+		dev_dbg(drv->dev, "freq: %lu level: %u fuse level: %u\n",
+			freq, dev_pm_opp_get_level(opp) - 1, fnum);
+		if (freq > fuse->max_freq)
+			fuse->max_freq = freq;
+		dev_pm_opp_put(opp);
+
+		/*
+		 * Make sure that the frequencies in the table are in ascending
+		 * order, as this is critical for the algorithm to work.
+		 */
+		if (cdata[level - 2].freq > freq) {
+			dev_err(drv->dev, "Frequency table not in ascending order.\n");
+			return -EINVAL;
+		}
+	}
+
+	if (thread->num_corners < 2) {
+		dev_err(drv->dev, "need at least 2 OPPs to use CPR\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Get the quotient adjustment scaling factor, according to:
+	 *
+	 * scaling = min(1000 * (QUOT(corner_N) - QUOT(corner_N-1))
+	 *		/ (freq(corner_N) - freq(corner_N-1)), max_factor)
+	 *
+	 * QUOT(corner_N):	quotient read from fuse for fuse corner N
+	 * QUOT(corner_N-1):	quotient read from fuse for fuse corner (N - 1)
+	 * freq(corner_N):	max frequency in MHz supported by fuse corner N
+	 * freq(corner_N-1):	max frequency in MHz supported by fuse corner
+	 *			 (N - 1)
+	 *
+	 * Then walk through the corners mapped to each fuse corner
+	 * and calculate the quotient adjustment for each one using the
+	 * following formula:
+	 *
+	 * quot_adjust = (freq_max - freq_corner) * scaling / 1000
+	 *
+	 * freq_max: max frequency in MHz supported by the fuse corner
+	 * freq_corner: frequency in MHz corresponding to the corner
+	 * scaling: calculated from above equation
+	 *
+	 *
+	 *     +                           +
+	 *     |                         v |
+	 *   q |           f c           o |           f c
+	 *   u |         c               l |         c
+	 *   o |       f                 t |       f
+	 *   t |     c                   a |     c
+	 *     | c f                     g | c f
+	 *     |                         e |
+	 *     +---------------            +----------------
+	 *       0 1 2 3 4 5 6               0 1 2 3 4 5 6
+	 *          corner                      corner
+	 *
+	 *    c = corner
+	 *    f = fuse corner
+	 *
+	 */
+	for (i = 0; corner <= end; corner++, i++) {
+		unsigned long freq_diff_mhz;
+		int ro_fac, vadj, prev_quot;
+
+		fnum = cdata[i].fuse_corner;
+		fdata = &tdesc->fuse_corner_data[fnum];
+		quot_offset = fuses[fnum].quotient_offset;
+		fuse = &thread->fuse_corners[fnum];
+		ring_osc_mask &= (u16)(~BIT(fuse->ring_osc_idx));
+		if (fnum)
+			prev_fuse = &thread->fuse_corners[fnum - 1];
+		else
+			prev_fuse = NULL;
+
+		corner->fuse_corner = fuse;
+		corner->freq = cdata[i].freq;
+		corner->uV = fuse->uV;
+
+		if (prev_fuse) {
+			if (prev_fuse->ring_osc_idx == fuse->ring_osc_idx)
+				quot_offset = NULL;
+
+			scaling = cpr_calculate_scaling(quot_offset, drv->dev,
+							fdata, corner);
+			if (scaling < 0)
+				return scaling;
+
+			freq_diff_mhz = fuse->max_freq - corner->freq;
+			do_div(freq_diff_mhz, 1000000); /* now in MHz */
+
+			corner->quot_adjust = scaling * freq_diff_mhz;
+			do_div(corner->quot_adjust, 1000);
+
+			/* Fine-tune QUOT (closed-loop) based on fixed values */
+			ro_fac = cpr_get_ro_factor(tdesc, fnum, fuse->ring_osc_idx);
+			vadj = cdata[i].cloop_vadj;
+			corner->quot_adjust -= cpr3_adjust_quot(ro_fac, vadj);
+			dev_vdbg(drv->dev, "Quot fine-tuning to %d for post-vadj=%d\n",
+				 corner->quot_adjust, vadj);
+
+			/*
+			 * Make sure that we scale (up) monotonically.
+			 * P.S.: Fuse quots can never be descending.
+			 */
+			prev_quot = prev_corner->fuse_corner->quot;
+			prev_quot -= prev_corner->quot_adjust;
+			if (fuse->quot - corner->quot_adjust < prev_quot) {
+				int new_adj = prev_corner->fuse_corner->quot;
+				new_adj -= fuse->quot;
+				dev_vdbg(drv->dev, "Monotonic increase forced: %d->%d\n",
+					 corner->quot_adjust, new_adj);
+				corner->quot_adjust = new_adj;
+			}
+
+			corner->uV = cpr_interpolate(corner,
+						     drv->vreg_step, fdata);
+		}
+		/* Negative fuse quotients are nonsense. */
+		if (fuse->quot < corner->quot_adjust)
+			return -EINVAL;
+
+		min_quotient = min(min_quotient,
+				   (u32)(fuse->quot - corner->quot_adjust));
+
+		/* Fine-tune voltages (open-loop) based on fixed values */
+		corner->uV += cdata[i].oloop_vadj;
+		dev_dbg(drv->dev, "Voltage fine-tuning to %d for post-vadj=%d\n",
+			 corner->uV, cdata[i].oloop_vadj);
+
+		corner->max_uV = fuse->max_uV;
+		corner->min_uV = fuse->min_uV;
+		corner->uV = clamp(corner->uV, corner->min_uV, corner->max_uV);
+		dev_vdbg(drv->dev, "Clamped after interpolation: [%d %d %d]\n",
+			corner->min_uV, corner->uV, corner->max_uV);
+
+		/* Make sure that we scale monotonically here, too. */
+		if (corner->uV < prev_corner->uV)
+			corner->uV = prev_corner->uV;
+
+		corner->last_uV = corner->uV;
+
+		/* Reduce the ceiling voltage if needed */
+		if (desc->reduce_to_corner_uV && corner->uV < corner->max_uV)
+			corner->max_uV = corner->uV;
+		else if (desc->reduce_to_fuse_uV && fuse->uV < corner->max_uV)
+			corner->max_uV = max(corner->min_uV, fuse->uV);
+
+		corner->min_uV = max(corner->max_uV - fdata->range_uV,
+				     corner->min_uV);
+
+		/*
+		 * Adjust per-corner floor and ceiling voltages so that
+		 * they do not overlap the memory Array Power Mux (APM)
+		 * nor the Memory Accelerator (MEM-ACC) threshold voltages.
+		 */
+		if (desc->apm_threshold)
+			cpr3_restrict_corner(corner, desc->apm_threshold,
+					     desc->apm_hysteresis,
+					     drv->vreg_step);
+		if (desc->mem_acc_threshold)
+			cpr3_restrict_corner(corner, desc->mem_acc_threshold,
+					     0, drv->vreg_step);
+
+		prev_corner = corner;
+		dev_dbg(drv->dev, "corner %d: [%d %d %d] scaling %d quot %d\n", i,
+			corner->min_uV, corner->uV, corner->max_uV, scaling,
+			fuse->quot - corner->quot_adjust);
+	}
+
+	/* Additional setup for CPRh only */
+	if (desc->cpr_type < CTRL_TYPE_CPRH)
+		return 0;
+
+	/* If the OPPs can't be adjusted, programming the CPRh is useless */
+	ret = cprh_corner_adjust_opps(thread);
+	if (ret) {
+		dev_err(drv->dev, "Cannot adjust CPU OPP voltages: %d\n", ret);
+		return ret;
+	}
+
+	total_corners = thread->num_corners;
+	extra_corners = drv->extra_corners;
+
+	/* If the APM extra corner exists, add it now. */
+	if (desc->apm_crossover && desc->apm_threshold && extra_corners) {
+		/* Program the APM crossover corner on the CPR-Hardened */
+		thread->corners[total_corners].uV = desc->apm_crossover;
+		thread->corners[total_corners].min_uV = desc->apm_crossover;
+		thread->corners[total_corners].max_uV = desc->apm_crossover;
+		thread->corners[total_corners].is_open_loop = true;
+
+		/*
+		 * We have calculated the APM parameters for this clock plan:
+		 * make the APM *threshold* available to external callers.
+		 * The crossover is used only internally in the CPR.
+		 */
+		thread->ext_data.apm_threshold_uV = desc->apm_threshold;
+
+		dev_dbg(drv->dev, "corner %d (APM): [%d %d %d] Open-Loop\n",
+			total_corners, desc->apm_crossover,
+			desc->apm_crossover, desc->apm_crossover);
+
+		total_corners++;
+		extra_corners--;
+	}
+
+	if (desc->mem_acc_threshold && extra_corners) {
+		/* Program the Memory Accelerator threshold corner to CPRh */
+		thread->corners[total_corners].uV = desc->mem_acc_threshold;
+		thread->corners[total_corners].min_uV = desc->mem_acc_threshold;
+		thread->corners[total_corners].max_uV = desc->mem_acc_threshold;
+		thread->corners[total_corners].is_open_loop = true;
+
+		/*
+		 * We have calculated a mem-acc threshold for this clock plan:
+		 * make it available to external callers.
+		 */
+		thread->ext_data.mem_acc_threshold_uV = desc->mem_acc_threshold;
+
+		dev_dbg(drv->dev, "corner %d (MEMACC): [%d %d %d] Open-Loop\n",
+			total_corners, desc->mem_acc_threshold,
+			desc->mem_acc_threshold, desc->mem_acc_threshold);
+
+		total_corners++;
+		extra_corners--;
+	}
+
+	/*
+	 * If there are any extra corners left, it means that even though we
+	 * expect to fill in both APM and MEM-ACC crossovers, one couldn't
+	 * satisfy requirements, which means that the specified parameters
+	 * are wrong: in this case, inform the user and bail out, otherwise
+	 * if we go on writing the (invalid) table to the CPR-Hardened, the
+	 * hardware (in this case, the CPU) will surely freeze and crash.
+	 */
+	if (unlikely(extra_corners)) {
+		dev_err(drv->dev, "APM/MEM-ACC corners: bad parameters.\n");
+		return -EINVAL;
+	}
+	/* Reassign extra_corners, as we have to exclude delta_quot for them */
+	extra_corners = drv->extra_corners;
+
+	/* Disable the interface between OSM and CPRh */
+	cpr_masked_write(thread, drv->reg_ctl,
+			 CPRH_CTL_OSM_ENABLED, 0);
+
+	/* Program the GCNT before unmasking ring oscillator(s) */
+	for (i = 0; i < CPR3_RO_COUNT; i++) {
+		if (!(ring_osc_mask & BIT(i))) {
+			cpr_write(thread, CPR3_REG_GCNT(i), drv->gcnt);
+			dev_vdbg(drv->dev, "RO%d gcnt=%d\n", i, drv->gcnt);
+		}
+	}
+
+	/*
+	 * Unmask the ring oscillator(s) that we're going to use: it seems
+	 * to be mandatory to do this *before* sending the rest of the
+	 * CPRhardened specific configuration.
+	 */
+	dev_dbg(drv->dev, "Unmasking ring oscillators with mask 0x%x\n", ring_osc_mask);
+	cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid), ring_osc_mask);
+
+	/* Setup minimum quotients for ring oscillators */
+	for (i = 0; i < CPR3_RO_COUNT; i++) {
+		u32 tgt_quot_reg = CPR3_REG_TARGET_QUOT(tdesc->hw_tid, i);
+		u32 tgt_quot_val = 0;
+
+		if (!(ring_osc_mask & BIT(i)))
+			tgt_quot_val = min_quotient;
+
+		cpr_write(thread, tgt_quot_reg, tgt_quot_val);
+		dev_vdbg(drv->dev, "Programmed min quotient %u for Ring Oscillator %d\n",
+			 tgt_quot_val, tgt_quot_reg);
+	}
+
+	for (i = 0; i < total_corners; i++) {
+		int volt_oloop_steps, volt_floor_steps, delta_quot_steps;
+		int ring_osc;
+		u32 val;
+
+		fnum = cdata[i].fuse_corner;
+		fuse = &thread->fuse_corners[fnum];
+
+		val = thread->corners[i].uV - desc->cpr_base_voltage;
+		volt_oloop_steps = DIV_ROUND_UP(val, drv->vreg_step);
+
+		val = thread->corners[i].min_uV - desc->cpr_base_voltage;
+		volt_floor_steps = DIV_ROUND_UP(val, drv->vreg_step);
+
+		/*
+		 * If we are accessing corners that are not used as
+		 * an active DCVS set-point, then always select RO 0
+		 * and zero out the delta quotient.
+		 */
+		if (i >= thread->num_corners) {
+			ring_osc = 0;
+			delta_quot_steps = 0;
+		} else {
+			ring_osc = fuse->ring_osc_idx;
+			val = fuse->quot - thread->corners[i].quot_adjust;
+			val -= min_quotient;
+			delta_quot_steps = DIV_ROUND_UP(val,
+						CPRH_DELTA_QUOT_STEP_FACTOR);
+		}
+
+		if (volt_oloop_steps > CPRH_CORNER_INIT_VOLTAGE_MAX_VALUE  ||
+		    volt_floor_steps > CPRH_CORNER_FLOOR_VOLTAGE_MAX_VALUE ||
+		    delta_quot_steps > CPRH_CORNER_QUOT_DELTA_MAX_VALUE) {
+			dev_err(drv->dev, "Invalid cfg: oloop=%d, floor=%d, delta=%d\n",
+				volt_oloop_steps, volt_floor_steps,
+				delta_quot_steps);
+			return -EINVAL;
+		}
+		/* Green light: Go, Go, Go! */
+
+		/* Set number of open-loop steps */
+		val = volt_oloop_steps << CPRH_CORNER_INIT_VOLTAGE_SHIFT;
+		val &= CPRH_CORNER_INIT_VOLTAGE_MASK;
+
+		/* Set number of floor voltage steps */
+		val |= (volt_floor_steps << CPRH_CORNER_FLOOR_VOLTAGE_SHIFT) &
+		       CPRH_CORNER_FLOOR_VOLTAGE_MASK;
+
+		/* Set number of target quotient delta steps */
+		val |= (delta_quot_steps << CPRH_CORNER_QUOT_DELTA_SHIFT) &
+		       CPRH_CORNER_QUOT_DELTA_MASK;
+
+		/* Select ring oscillator for this corner */
+		val |= (ring_osc << CPRH_CORNER_RO_SEL_SHIFT) &
+		       CPRH_CORNER_RO_SEL_MASK;
+
+		/* Open loop corner is usually APM/ACC crossover */
+		if (thread->corners[i].is_open_loop) {
+			dev_dbg(drv->dev, "Disabling Closed-Loop on corner %d\n", i);
+			val |= CPRH_CORNER_CPR_CL_DISABLE;
+		}
+		cpr_write(thread, CPRH_REG_CORNER(drv, tdesc->hw_tid, i), val);
+
+		dev_dbg(drv->dev, "steps [%d]: open-loop %d, floor %d, delta_quot %d\n",
+			i, volt_oloop_steps, volt_floor_steps,
+			delta_quot_steps);
+	}
+
+	/* YAY! Setup is done! Enable the internal loop to start CPR. */
+	cpr_masked_write(thread, CPR3_REG_CPR_CTL,
+			CPR3_CPR_CTL_LOOP_EN_MASK,
+			CPR3_CPR_CTL_LOOP_EN_MASK);
+
+	/*
+	 * All the writes are going through before enabling internal
+	 * communication between the OSM and the CPRh controllers
+	 * because we are never using relaxed accessors, but should
+	 * we use them, it would be critical to issue a barrier here,
+	 * otherwise there is a high risk of hardware lockups due to
+	 * under-voltage for the selected CPU clock.
+	 *
+	 * Please note that the CPR-hardened gets set-up in Linux but
+	 * then gets actually used in firmware (and only by the OSM);
+	 * after handing it off we will have no more control on it.
+	 */
+
+	/* Enable the interface between OSM and CPRh */
+	cpr_masked_write(thread, drv->reg_ctl,
+			 CPRH_CTL_OSM_ENABLED,
+			 CPRH_CTL_OSM_ENABLED);
+
+	/* On success, free cdata manually */
+	devm_kfree(drv->dev, cdata);
+	return 0;
+}
+
+/**
+ * cpr3_init_parameters() - Initialize CPR global parameters
+ * @drv: Main driver structure
+ *
+ * Initial "integrity" checks and setup for the thread-independent parameters.
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr3_init_parameters(struct cpr_drv *drv)
+{
+	const struct cpr_desc *desc = drv->desc;
+	struct clk *clk;
+
+	clk = devm_clk_get(drv->dev, "ref");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	drv->ref_clk_khz = clk_get_rate(clk);
+	do_div(drv->ref_clk_khz, 1000);
+
+	/* On CPRh this clock is not always-on... */
+	if (desc->cpr_type == CTRL_TYPE_CPRH)
+		clk_prepare_enable(clk);
+	else
+		devm_clk_put(drv->dev, clk);
+
+	if (desc->timer_cons_up > CPR3_THRESH_CONS_UP_MASK ||
+	    desc->timer_cons_down > CPR3_THRESH_CONS_DOWN_MASK ||
+	    desc->up_threshold > CPR3_THRESH_UP_THRESH_MASK ||
+	    desc->down_threshold > CPR3_THRESH_DOWN_THRESH_MASK ||
+	    desc->idle_clocks > CPR3_CPR_CTL_IDLE_CLOCKS_MASK ||
+	    desc->count_mode > CPR3_CPR_CTL_COUNT_MODE_MASK ||
+	    desc->count_repeat > CPR3_CPR_CTL_COUNT_REPEAT_MASK)
+		return -EINVAL;
+
+	/*
+	 * Read the CPR version register only from CPR3 onwards:
+	 * this is needed to get the additional register offsets.
+	 *
+	 * Note: When threaded, even if multi-controller, there
+	 *       is no chance to have different versions at the
+	 *       same time in the same domain, so it is safe to
+	 *       check this only on the first controller/thread.
+	 */
+	drv->cpr_hw_rev = cpr_read(&drv->threads[0],
+				   CPR3_REG_CPR_VERSION);
+	dev_dbg(drv->dev, "CPR hardware revision: 0x%x\n", drv->cpr_hw_rev);
+
+	if (drv->cpr_hw_rev >= CPRH_CPR_VERSION_4P5) {
+		drv->reg_corner = 0x3500;
+		drv->reg_corner_tid = 0xa0;
+		drv->reg_ctl = 0x3a80;
+		drv->reg_status = 0x3a84;
+	} else {
+		drv->reg_corner = 0x3a00;
+		drv->reg_corner_tid = 0;
+		drv->reg_ctl = 0x3aa0;
+		drv->reg_status = 0x3aa4;
+	}
+
+	dev_dbg(drv->dev, "up threshold = %u, down threshold = %u\n",
+		desc->up_threshold, desc->down_threshold);
+
+	return 0;
+}
+
+/**
+ * cpr3_find_initial_corner() - Finds boot-up p-state and enables CPR
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * Differently from CPRv1, from CPRv3 onwards when we successfully find
+ * the target boot-up performance state, we must refresh the HW
+ * immediately to guarantee system stability and to avoid overheating
+ * during the boot process, thing that would more likely happen without
+ * this driver doing its job.
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr3_find_initial_corner(struct cpr_thread *thread)
+{
+	struct cpr_drv *drv = thread->drv;
+	struct corner *corner;
+	int uV, idx;
+
+	idx = cpr_find_initial_corner(drv->dev, thread->cpu_clk,
+				      thread->corners,
+				      thread->num_corners);
+	if (idx < 0)
+		return idx;
+
+	cpr_ctl_disable(thread);
+
+	corner = &thread->corners[idx];
+	cpr_corner_restore(thread, corner);
+
+	uV = regulator_get_voltage(drv->vreg);
+	uV = clamp(uV, corner->min_uV, corner->max_uV);
+
+	corner->last_uV = uV;
+	if (!drv->last_uV)
+		drv->last_uV = uV;
+
+	cpr_commit_state(thread);
+	thread->enabled = true;
+	cpr_switch(drv);
+
+	return 0;
+}
+
+static const int msm8998_gold_scaling_factor[][CPR3_RO_COUNT] = {
+	/* Fuse Corner 0 */
+	{
+		2857, 3057, 2828, 2952, 2699, 2798, 2446, 2631,
+		2629, 2578, 2244, 3344, 3289, 3137, 3164, 2655
+	},
+	/* Fuse Corner 1 */
+	{
+		2857, 3057, 2828, 2952, 2699, 2798, 2446, 2631,
+		2629, 2578, 2244, 3344, 3289, 3137, 3164, 2655
+	},
+	/* Fuse Corner 2 */
+	{
+		2603, 2755, 2676, 2777, 2573, 2685, 2465, 2610,
+		2312, 2423, 2243, 3104, 3022, 3036, 2740, 2303
+	},
+	/* Fuse Corner 3 */
+	{
+		1901, 2016, 2096, 2228, 2034, 2161, 2077, 2188,
+		1565, 1870, 1925, 2235, 2205, 2413, 1762, 1478
+	}
+};
+
+static const int msm8998_silver_scaling_factor[][CPR3_RO_COUNT] = {
+	/* Fuse Corner 0 */
+	{
+		2595, 2794, 2577, 2762, 2471, 2674, 2199, 2553,
+		3189, 3255, 3192, 2962, 3054, 2982, 2042, 2945
+	},
+	/* Fuse Corner 1 */
+	{
+		2595, 2794, 2577, 2762, 2471, 2674, 2199, 2553,
+		3189, 3255, 3192, 2962, 3054, 2982, 2042, 2945
+	},
+	/* Fuse Corner 2 */
+	{
+		2391, 2550, 2483, 2638, 2382, 2564, 2259, 2555,
+		2766, 3041, 2988, 2935, 2873, 2688, 2013, 2784
+	},
+	/* Fuse Corner 3 */
+	{
+		2066, 2153, 2300, 2434, 2220, 2386, 2288, 2465,
+		2028, 2511, 2487, 2734, 2554, 2117, 1892, 2377
+	}
+};
+
+static const struct cpr_thread_desc msm8998_thread_gold = {
+	.controller_id = 1,
+	.hw_tid = 0,
+	.ro_scaling_factor = msm8998_gold_scaling_factor,
+	.ro_avail_corners = ARRAY_SIZE(msm8998_gold_scaling_factor),
+	.sensor_range_start = 0,
+	.sensor_range_end = 9,
+	.init_voltage_step = 10000,
+	.init_voltage_width = 6,
+	.step_quot_init_min = 9,
+	.step_quot_init_max = 14,
+	.num_fuse_corners = 4,
+	.fuse_corner_data = (struct fuse_corner_data[]){
+		/* fuse corner 0 */
+		{
+			.ref_uV = 756000,
+			.max_uV = 828000,
+			.min_uV = 568000,
+			.range_uV = 32000,
+			.volt_cloop_adjust = 0,
+			.volt_oloop_adjust = 8000,
+			.max_volt_scale = 4,
+			.max_quot_scale = 10,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 1 */
+		{
+			.ref_uV = 756000,
+			.max_uV = 900000,
+			.min_uV = 624000,
+			.range_uV = 32000,
+			.volt_cloop_adjust = 0,
+			.volt_oloop_adjust = 0,
+			.max_volt_scale = 320,
+			.max_quot_scale = 350,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 2 */
+		{
+			.ref_uV = 828000,
+			.max_uV = 952000,
+			.min_uV = 632000,
+			.range_uV = 32000,
+			.volt_cloop_adjust = 12000,
+			.volt_oloop_adjust = 12000,
+			.max_volt_scale = 620,
+			.max_quot_scale = 750,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 3 */
+		{
+			.ref_uV = 1056000,
+			.max_uV = 1136000,
+			.min_uV = 772000,
+			.range_uV = 40000,
+			.volt_cloop_adjust = 50000,
+			.volt_oloop_adjust = 52000,
+			.max_volt_scale = 580,
+			.max_quot_scale = 1040,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+	},
+};
+
+static const struct cpr_thread_desc msm8998_thread_silver = {
+	.controller_id = 0,
+	.hw_tid = 0,
+	.ro_scaling_factor = msm8998_silver_scaling_factor,
+	.ro_avail_corners = ARRAY_SIZE(msm8998_silver_scaling_factor),
+	.sensor_range_start = 0,
+	.sensor_range_end = 6,
+	.init_voltage_step = 10000,
+	.init_voltage_width = 6,
+	.step_quot_init_min = 11,
+	.step_quot_init_max = 12,
+	.num_fuse_corners = 4,
+	.fuse_corner_data = (struct fuse_corner_data[]){
+		/* fuse corner 0 */
+		{
+			.ref_uV = 688000,
+			.max_uV = 828000,
+			.min_uV = 568000,
+			.range_uV = 32000,
+			.volt_cloop_adjust = 20000,
+			.volt_oloop_adjust = 40000,
+			.max_volt_scale = 4,
+			.max_quot_scale = 10,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 1 */
+		{
+			.ref_uV = 756000,
+			.max_uV = 900000,
+			.min_uV = 632000,
+			.range_uV = 32000,
+			.volt_cloop_adjust = 26000,
+			.volt_oloop_adjust = 24000,
+			.max_volt_scale = 500,
+			.max_quot_scale = 800,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 2 */
+		{
+			.ref_uV = 828000,
+			.max_uV = 952000,
+			.min_uV = 664000,
+			.range_uV = 32000,
+			.volt_cloop_adjust = 12000,
+			.volt_oloop_adjust = 12000,
+			.max_volt_scale = 280,
+			.max_quot_scale = 650,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+
+		},
+		/* fuse corner 3 */
+		{
+			.ref_uV = 1056000,
+			.max_uV = 1056000,
+			.min_uV = 772000,
+			.range_uV = 40000,
+			.volt_cloop_adjust = 30000,
+			.volt_oloop_adjust = 30000,
+			.max_volt_scale = 430,
+			.max_quot_scale = 800,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+	},
+};
+
+static const struct cpr_desc msm8998_cpr_desc = {
+	.cpr_type = CTRL_TYPE_CPRH,
+	.num_threads = 2,
+	.mem_acc_threshold = 852000,
+	.apm_threshold = 800000,
+	.apm_crossover = 880000,
+	.apm_hysteresis = 0,
+	.cpr_base_voltage = 352000,
+	.cpr_max_voltage = 1200000,
+	.timer_delay_us = 5000,
+	.timer_cons_up = 0,
+	.timer_cons_down = 2,
+	.up_threshold = 2,
+	.down_threshold = 2,
+	.idle_clocks = 15,
+	.count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN,
+	.count_repeat = 14,
+	.gcnt_us = 1,
+	.vreg_step_fixed = 4000,
+	.vreg_step_up_limit = 1,
+	.vreg_step_down_limit = 1,
+	.vdd_settle_time_us = 34,
+	.corner_settle_time_us = 6,
+	.reduce_to_corner_uV = true,
+	.hw_closed_loop_en = true,
+	.threads = (const struct cpr_thread_desc *[]) {
+		&msm8998_thread_silver,
+		&msm8998_thread_gold,
+	},
+};
+
+static const struct cpr_acc_desc msm8998_cpr_acc_desc = {
+	.cpr_desc = &msm8998_cpr_desc,
+};
+
+static const int sdm630_gold_scaling_factor[][CPR3_RO_COUNT] = {
+	/* Same RO factors for all fuse corners */
+	{
+		4040, 3230,    0, 2210, 2560, 2450, 2230, 2220,
+		2410, 2300, 2560, 2470, 1600, 3120, 2620, 2280
+	}
+};
+
+static const int sdm630_silver_scaling_factor[][CPR3_RO_COUNT] = {
+	/* Same RO factors for all fuse corners */
+	{
+		3600, 3600, 3830, 2430, 2520, 2700, 1790, 1760,
+		1970, 1880, 2110, 2010, 2510, 4900, 4370, 4780,
+	}
+};
+
+static const struct cpr_thread_desc sdm630_thread_gold = {
+	.controller_id = 0,
+	.hw_tid = 0,
+	.ro_scaling_factor = sdm630_gold_scaling_factor,
+	.ro_avail_corners = ARRAY_SIZE(sdm630_gold_scaling_factor),
+	.sensor_range_start = 0,
+	.sensor_range_end = 6,
+	.init_voltage_step = 10000,
+	.init_voltage_width = 6,
+	.step_quot_init_min = 12,
+	.step_quot_init_max = 14,
+	.num_fuse_corners = 5,
+	.fuse_corner_data = (struct fuse_corner_data[]){
+		/* fuse corner 0 */
+		{
+			.ref_uV = 644000,
+			.max_uV = 724000,
+			.min_uV = 588000,
+			.range_uV = 40000,
+			.volt_cloop_adjust = -30000,
+			.volt_oloop_adjust = 15000,
+			.max_volt_scale = 10,
+			.max_quot_scale = 300,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 1 */
+		{
+			.ref_uV = 788000,
+			.max_uV = 788000,
+			.min_uV = 652000,
+			.range_uV = 40000,
+			.volt_cloop_adjust = -30000,
+			.volt_oloop_adjust = 5000,
+			.max_volt_scale = 320,
+			.max_quot_scale = 275,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 2 */
+		{
+			.ref_uV = 868000,
+			.max_uV = 868000,
+			.min_uV = 712000,
+			.range_uV = 40000,
+			.volt_cloop_adjust = -30000,
+			.volt_oloop_adjust = 5000,
+			.max_volt_scale = 350,
+			.max_quot_scale = 800,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 3 */
+		{
+			.ref_uV = 988000,
+			.max_uV = 988000,
+			.min_uV = 784000,
+			.range_uV = 66000,
+			.volt_cloop_adjust = -30000,
+			.volt_oloop_adjust = 0,
+			.max_volt_scale = 868,
+			.max_quot_scale = 980,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 4 */
+		{
+			.ref_uV = 1068000,
+			.max_uV = 1068000,
+			.min_uV = 844000,
+			.range_uV = 40000,
+			.volt_cloop_adjust = -30000,
+			.volt_oloop_adjust = 0,
+			.max_volt_scale = 868,
+			.max_quot_scale = 980,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+	},
+};
+
+static const struct cpr_thread_desc sdm630_thread_silver = {
+	.controller_id = 1,
+	.hw_tid = 0,
+	.ro_scaling_factor = sdm630_silver_scaling_factor,
+	.ro_avail_corners = ARRAY_SIZE(sdm630_silver_scaling_factor),
+	.sensor_range_start = 0,
+	.sensor_range_end = 6,
+	.init_voltage_step = 10000,
+	.init_voltage_width = 6,
+	.step_quot_init_min = 12,
+	.step_quot_init_max = 14,
+	.num_fuse_corners = 3,
+	.fuse_corner_data = (struct fuse_corner_data[]){
+		/* fuse corner 0 */
+		{
+			.ref_uV = 644000,
+			.max_uV = 724000,
+			.min_uV = 588000,
+			.range_uV = 32000,
+			.volt_cloop_adjust = -30000,
+			.volt_oloop_adjust = 0,
+			.max_volt_scale = 10,
+			.max_quot_scale = 360,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 1 */
+		{
+			.ref_uV = 788000,
+			.max_uV = 788000,
+			.min_uV = 652000,
+			.range_uV = 40000,
+			.volt_cloop_adjust = -30000,
+			.volt_oloop_adjust = 0,
+			.max_volt_scale = 500,
+			.max_quot_scale = 550,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+		/* fuse corner 2 */
+		{
+			.ref_uV = 1068000,
+			.max_uV = 1068000,
+			.min_uV = 800000,
+			.range_uV = 40000,
+			.volt_cloop_adjust = -30000,
+			.volt_oloop_adjust = 0,
+			.max_volt_scale = 2370,
+			.max_quot_scale = 550,
+			.quot_offset = 0,
+			.quot_scale = 1,
+			.quot_adjust = 0,
+			.quot_offset_scale = 5,
+			.quot_offset_adjust = 0,
+		},
+	},
+};
+
+static const struct cpr_desc sdm630_cpr_desc = {
+	.cpr_type = CTRL_TYPE_CPRH,
+	.num_threads = 2,
+	.apm_threshold = 872000,
+	.apm_crossover = 872000,
+	.apm_hysteresis = 20000,
+	.cpr_base_voltage = 400000,
+	.cpr_max_voltage = 1300000,
+	.timer_delay_us = 5000,
+	.timer_cons_up = 0,
+	.timer_cons_down = 2,
+	.up_threshold = 2,
+	.down_threshold = 2,
+	.idle_clocks = 15,
+	.count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN,
+	.count_repeat = 14,
+	.gcnt_us = 1,
+	.vreg_step_fixed = 4000,
+	.vreg_step_up_limit = 1,
+	.vreg_step_down_limit = 1,
+	.vdd_settle_time_us = 34,
+	.corner_settle_time_us = 5,
+	.reduce_to_corner_uV = true,
+	.hw_closed_loop_en = true,
+	.threads = (const struct cpr_thread_desc *[]) {
+		&sdm630_thread_gold,
+		&sdm630_thread_silver,
+	},
+};
+
+static const struct cpr_acc_desc sdm630_cpr_acc_desc = {
+	.cpr_desc = &sdm630_cpr_desc,
+};
+
+static unsigned int cpr_get_performance_state(struct generic_pm_domain *genpd,
+					      struct dev_pm_opp *opp)
+{
+	return dev_pm_opp_get_level(opp);
+}
+
+static int cpr_power_off(struct generic_pm_domain *domain)
+{
+	struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd);
+
+	return cpr_disable(thread);
+}
+
+static int cpr_power_on(struct generic_pm_domain *domain)
+{
+	struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd);
+
+	return cpr_enable(thread);
+}
+
+static void cpr_pd_detach_dev(struct generic_pm_domain *domain,
+			      struct device *dev)
+{
+	struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd);
+	struct cpr_drv *drv = thread->drv;
+
+	mutex_lock(&drv->lock);
+
+	dev_dbg(drv->dev, "detach callback for: %s\n", dev_name(dev));
+	thread->attached_cpu_dev = NULL;
+
+	mutex_unlock(&drv->lock);
+}
+
+static int cpr_pd_attach_dev(struct generic_pm_domain *domain,
+			     struct device *dev)
+{
+	struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd);
+	struct cpr_drv *drv = thread->drv;
+	const struct acc_desc *acc_desc = drv->acc_desc;
+	bool cprh_opp_remove_table = false;
+	int ret = 0;
+
+	mutex_lock(&drv->lock);
+
+	dev_dbg(drv->dev, "attach callback for: %s\n", dev_name(dev));
+
+	/*
+	 * This driver only supports scaling voltage for a CPU cluster
+	 * where all CPUs in the cluster share a single regulator.
+	 * Therefore, save the struct device pointer only for the first
+	 * CPU device that gets attached. There is no need to do any
+	 * additional initialization when further CPUs get attached.
+	 * This is not an error condition.
+	 */
+	if (thread->attached_cpu_dev)
+		goto unlock;
+
+	/*
+	 * cpr_scale_voltage() requires the direction (if we are changing
+	 * to a higher or lower OPP). The first time
+	 * cpr_set_performance_state() is called, there is no previous
+	 * performance state defined. Therefore, we call
+	 * cpr_find_initial_corner() that gets the CPU clock frequency
+	 * set by the bootloader, so that we can determine the direction
+	 * the first time cpr_set_performance_state() is called.
+	 */
+	thread->cpu_clk = devm_clk_get(dev, NULL);
+	if (drv->desc->cpr_type < CTRL_TYPE_CPRH && IS_ERR(thread->cpu_clk)) {
+		ret = PTR_ERR(thread->cpu_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(drv->dev, "could not get cpu clk: %d\n", ret);
+		goto unlock;
+	}
+	thread->attached_cpu_dev = dev;
+
+	/*
+	 * We are exporting the APM and MEM-ACC thresholds to the caller;
+	 * while APM is necessary in the CPU CPR case, MEM-ACC may not be,
+	 * depending on the SoC and on fuses.
+	 * Initialize both to an invalid value, so that the caller can check
+	 * if they got calculated or read from fuses in this driver.
+	 */
+	thread->ext_data.apm_threshold_uV = -1;
+	thread->ext_data.mem_acc_threshold_uV = -1;
+	dev_set_drvdata(thread->attached_cpu_dev, &thread->ext_data);
+
+	dev_dbg(drv->dev, "using cpu clk from: %s\n",
+		dev_name(thread->attached_cpu_dev));
+
+	/*
+	 * Everything related to (virtual) corners has to be initialized
+	 * here, when attaching to the power domain, since we need to know
+	 * the maximum frequency for each fuse corner, and this is only
+	 * available after the cpufreq driver has attached to us.
+	 * The reason for this is that we need to know the highest
+	 * frequency associated with each fuse corner.
+	 */
+	ret = dev_pm_opp_get_opp_count(&thread->pd.dev);
+	if (ret < 0) {
+		dev_err(drv->dev, "could not get OPP count\n");
+		thread->attached_cpu_dev = NULL;
+		goto unlock;
+	}
+	thread->num_corners = ret;
+
+	thread->corners = devm_kcalloc(drv->dev,
+				       thread->num_corners +
+				       drv->extra_corners,
+				       sizeof(*thread->corners),
+				       GFP_KERNEL);
+	if (!thread->corners) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	/*
+	 * If we are on CPR-Hardened we have to make sure that the attached
+	 * device has a OPP table installed, as we're going to modify it here
+	 * with our calculations based on qfprom values.
+	 */
+	if (drv->desc->cpr_type == CTRL_TYPE_CPRH) {
+		ret = dev_pm_opp_of_add_table(dev);
+		if (ret && ret != -EEXIST) {
+			dev_err(drv->dev, "Cannot add table: %d\n", ret);
+			goto unlock;
+		}
+		cprh_opp_remove_table = true;
+	}
+
+	ret = cpr3_corner_init(thread);
+	if (ret)
+		goto exit;
+
+	if (drv->desc->cpr_type < CTRL_TYPE_CPRH) {
+		ret = cpr3_find_initial_corner(thread);
+		if (ret)
+			goto exit;
+
+		if (acc_desc->config)
+			regmap_multi_reg_write(drv->tcsr, acc_desc->config,
+					       acc_desc->num_regs_per_fuse);
+
+		/* Enable ACC if required */
+		if (acc_desc->enable_mask)
+			regmap_update_bits(drv->tcsr, acc_desc->enable_reg,
+					   acc_desc->enable_mask,
+					   acc_desc->enable_mask);
+	}
+	dev_info(drv->dev, "thread %d initialized with %u OPPs\n",
+		 thread->id, thread->num_corners);
+exit:
+	/*
+	 * If we are on CPRh and we reached an error condition, we installed
+	 * the OPP table but we haven't done any setup on it, nor we ever will.
+	 * In order to leave a clean state, remove the table.
+	 */
+	if (ret && cprh_opp_remove_table)
+		dev_pm_opp_of_remove_table(thread->attached_cpu_dev);
+unlock:
+	mutex_unlock(&drv->lock);
+
+	return ret;
+}
+
+static int cpr3_debug_info_show(struct seq_file *s, void *unused)
+{
+	u32 ro_sel, ctl, irq_status, reg, quot;
+	struct cpr_thread *thread = s->private;
+	struct corner *corner = thread->corners;
+	struct fuse_corner *fuse = thread->fuse_corners;
+	unsigned int i;
+
+	const struct {
+		const char *name;
+		uint32_t mask;
+		uint8_t shift;
+	} result0_fields[] = {
+		{ "busy", 1, 0 },
+		{ "step_dn", 1, 1 },
+		{ "step_up", 1, 2 },
+		{ "error_steps", CPR3_RESULT0_ERROR_STEPS_MASK,
+				 CPR3_RESULT0_ERROR_STEPS_SHIFT },
+		{ "error", CPR3_RESULT0_ERROR_MASK, CPR3_RESULT0_ERROR_SHIFT },
+		{ "negative", 1, 20 },
+	}, result1_fields[] = {
+		{ "quot_min", CPR3_RESULT1_QUOT_MIN_MASK,
+			      CPR3_RESULT1_QUOT_MIN_SHIFT },
+		{ "quot_max", CPR3_RESULT1_QUOT_MAX_MASK,
+			      CPR3_RESULT1_QUOT_MAX_SHIFT },
+		{ "ro_min", CPR3_RESULT1_RO_MIN_MASK,
+			    CPR3_RESULT1_RO_MIN_SHIFT },
+		{ "ro_max", CPR3_RESULT1_RO_MAX_MASK,
+			    CPR3_RESULT1_RO_MAX_SHIFT },
+	}, result2_fields[] = {
+		{ "qout_step_min", CPR3_RESULT2_STEP_QUOT_MIN_MASK,
+				   CPR3_RESULT2_STEP_QUOT_MIN_SHIFT },
+		{ "qout_step_max", CPR3_RESULT2_STEP_QUOT_MAX_MASK,
+				   CPR3_RESULT2_STEP_QUOT_MAX_SHIFT },
+		{ "sensor_min", CPR3_RESULT2_SENSOR_MIN_MASK,
+				CPR3_RESULT2_SENSOR_MIN_SHIFT },
+		{ "sensor_max", CPR3_RESULT2_SENSOR_MAX_MASK,
+				CPR3_RESULT2_SENSOR_MAX_SHIFT },
+	};
+
+	if (thread->drv->desc->cpr_type < CTRL_TYPE_CPRH)
+		seq_printf(s, "current_volt = %d uV\n", thread->drv->last_uV);
+
+	irq_status = cpr_read(thread, CPR3_REG_IRQ_STATUS);
+	seq_printf(s, "irq_status = %#02X\n", irq_status);
+
+	ctl = cpr_read(thread, CPR3_REG_CPR_CTL);
+	seq_printf(s, "cpr_ctl = %#02X\n", ctl);
+
+	seq_printf(s, "thread %d - hw tid: %u - enabled: %d:\n",
+		   thread->id, thread->desc->hw_tid, thread->enabled);
+	seq_printf(s, "%d corners, derived from %d fuse corners\n",
+		   thread->num_corners, thread->desc->num_fuse_corners);
+
+	for (i = 0; i < thread->num_corners; i++, corner++)
+		seq_printf(s, "corner %d - uV=[%d %d %d] quot=%d freq=%lu\n",
+			   i, corner->min_uV, corner->uV, corner->max_uV,
+			   corner->quot_adjust, corner->freq);
+
+	for (i = 0; i < thread->desc->num_fuse_corners; i++, fuse++)
+		seq_printf(s, "fuse %d - uV=[%d %d %d] quot=%d freq=%lu\n",
+			   i, fuse->min_uV, fuse->uV, fuse->max_uV,
+			   fuse->quot, corner->freq);
+
+	seq_printf(s, "requested voltage: %d uV\n", thread->corner->last_uV);
+
+	ro_sel = corner->fuse_corner->ring_osc_idx;
+	quot = cpr_read(thread, CPR3_REG_TARGET_QUOT(i, ro_sel));
+	seq_printf(s, "quot_target (%u) = %#02X\n", ro_sel, quot);
+
+	reg = cpr_read(thread, CPR3_REG_RESULT0(i));
+	seq_printf(s, "cpr_result_0 = %#02X\n  [", reg);
+	for (i = 0; i < ARRAY_SIZE(result0_fields); i++)
+		seq_printf(s, "%s%s = %u",
+			   i ? ", " : "",
+			   result0_fields[i].name,
+			   (reg >> result0_fields[i].shift) &
+				result0_fields[i].mask);
+	seq_puts(s, "]\n");
+	reg = cpr_read(thread, CPR3_REG_RESULT1(i));
+	seq_printf(s, "cpr_result_1 = %#02X\n  [", reg);
+	for (i = 0; i < ARRAY_SIZE(result1_fields); i++)
+		seq_printf(s, "%s%s = %u",
+			   i ? ", " : "",
+			   result1_fields[i].name,
+			   (reg >> result1_fields[i].shift) &
+				result1_fields[i].mask);
+	seq_puts(s, "]\n");
+	reg = cpr_read(thread, CPR3_REG_RESULT2(i));
+	seq_printf(s, "cpr_result_2 = %#02X\n  [", reg);
+	for (i = 0; i < ARRAY_SIZE(result2_fields); i++)
+		seq_printf(s, "%s%s = %u",
+			   i ? ", " : "",
+			   result2_fields[i].name,
+			   (reg >> result2_fields[i].shift) &
+				result2_fields[i].mask);
+	seq_puts(s, "]\n");
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(cpr3_debug_info);
+
+static void cpr3_debugfs_init(struct cpr_drv *drv)
+{
+	int i;
+
+	drv->debugfs = debugfs_create_dir("qcom_cpr3", NULL);
+
+	for (i = 0; i < drv->desc->num_threads; i++) {
+		char buf[50];
+
+		snprintf(buf, sizeof(buf), "thread%d", i);
+
+		debugfs_create_file(buf, 0444, drv->debugfs, &drv->threads[i],
+				    &cpr3_debug_info_fops);
+	}
+}
+
+/**
+ * cpr_thread_init() - Initialize CPR thread related parameters
+ * @drv: Main driver structure
+ * @tid: Thread ID
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr_thread_init(struct cpr_drv *drv, int tid)
+{
+	const struct cpr_desc *desc = drv->desc;
+	const struct cpr_thread_desc *tdesc = desc->threads[tid];
+	struct cpr_thread *thread = &drv->threads[tid];
+	int ret;
+
+	if (tdesc->step_quot_init_min > CPR3_CPR_STEP_QUOT_MIN_MASK ||
+	    tdesc->step_quot_init_max > CPR3_CPR_STEP_QUOT_MAX_MASK)
+		return -EINVAL;
+
+	thread->id = tid;
+	thread->drv = drv;
+	thread->desc = tdesc;
+	thread->fuse_corners = devm_kcalloc(drv->dev,
+					    tdesc->num_fuse_corners +
+					    drv->extra_corners,
+					    sizeof(*thread->fuse_corners),
+					    GFP_KERNEL);
+	if (!thread->fuse_corners)
+		return -ENOMEM;
+
+	thread->cpr_fuses = cpr_get_fuses(drv->dev, tid,
+					  tdesc->num_fuse_corners);
+	if (IS_ERR(thread->cpr_fuses))
+		return PTR_ERR(thread->cpr_fuses);
+
+	ret = cpr_populate_ring_osc_idx(thread->drv->dev, thread->fuse_corners,
+					thread->cpr_fuses,
+					tdesc->num_fuse_corners);
+	if (ret)
+		return ret;
+
+	ret = cpr_fuse_corner_init(thread);
+	if (ret)
+		return ret;
+
+	thread->pd.name = devm_kasprintf(drv->dev, GFP_KERNEL,
+					 "%s_thread%d",
+					 drv->dev->of_node->full_name,
+					 thread->id);
+	if (!thread->pd.name)
+		return -EINVAL;
+
+	thread->pd.power_off = cpr_power_off;
+	thread->pd.power_on = cpr_power_on;
+	thread->pd.opp_to_performance_state = cpr_get_performance_state;
+	thread->pd.attach_dev = cpr_pd_attach_dev;
+	thread->pd.detach_dev = cpr_pd_detach_dev;
+
+	/* CPR-Hardened performance states are managed in firmware */
+	if (desc->cpr_type == CTRL_TYPE_CPRH) {
+		thread->pd.set_performance_state = cprh_dummy_set_performance_state;
+	} else {
+		thread->pd.set_performance_state = cpr_set_performance_state;
+	}
+
+	/* Anything later than CPR1 must be always-on for now */
+	thread->pd.flags = GENPD_FLAG_ALWAYS_ON;
+
+	drv->cell_data.domains[tid] = &thread->pd;
+
+	ret = pm_genpd_init(&thread->pd, NULL, false);
+	if (ret)
+		return ret;
+
+	/* On CPRhardened, the interrupts are managed in firmware */
+	if (desc->cpr_type < CTRL_TYPE_CPRH) {
+		INIT_WORK(&thread->restart_work, cpr_restart_worker);
+
+		ret = devm_request_threaded_irq(drv->dev, drv->irq,
+						NULL, cpr_irq_handler,
+						IRQF_ONESHOT |
+						IRQF_TRIGGER_RISING,
+						"cpr", drv);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * cpr3_resources_init() - Initialize resources used by this driver
+ * @pdev: Platform device
+ * @drv:  Main driver structure
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr3_resources_init(struct platform_device *pdev,
+			       struct cpr_drv *drv)
+{
+	const struct cpr_desc *desc = drv->desc;
+	struct cpr_thread *threads = drv->threads;
+	unsigned int i;
+	u8 cid_mask = 0;
+
+	/*
+	 * Here, we are accounting for the following usecases:
+	 * - One controller
+	 *   - One or multiple threads on the same iospace
+	 *
+	 * - Multiple controllers
+	 *   - Each controller has its own iospace and each
+	 *     may have one or multiple threads in their
+	 *     parent controller's iospace
+	 *
+	 * Then, to avoid complicating the code for no reason,
+	 * this also needs a mandatory order in the list of
+	 * threads which implies that all of them from the same
+	 * controllers are specified sequentially. As an example:
+	 *
+	 *      C0-T0, C0-T1...C0-Tn, C1-T0, C1-T1...C1-Tn
+	 */
+	for (i = 0; i < desc->num_threads; i++) {
+		u8 cid = desc->threads[i]->controller_id;
+
+		if (cid_mask & BIT(cid)) {
+			if (desc->threads[i - 1]->controller_id != cid) {
+				dev_err(drv->dev, "Bad threads order. Please fix!\n");
+				return -EINVAL;
+			}
+			threads[i].base = threads[i - 1].base;
+			continue;
+		}
+		threads[i].base = devm_platform_ioremap_resource(pdev, cid);
+		if (IS_ERR(threads[i].base))
+			return PTR_ERR(threads[i].base);
+		cid_mask |= BIT(cid);
+	}
+	return 0;
+}
+
+static int cpr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cpr_drv *drv;
+	const struct cpr_desc *desc;
+	const struct cpr_acc_desc *data;
+	struct device_node *np;
+	unsigned int i;
+	int ret;
+
+	data = of_device_get_match_data(dev);
+	if (!data || !data->cpr_desc)
+		return -EINVAL;
+
+	desc = data->cpr_desc;
+
+	/* CPRh disallows MEM-ACC access from the HLOS */
+	if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPRH)
+		return -EINVAL;
+
+	drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	drv->dev = dev;
+	drv->desc = desc;
+	drv->threads = devm_kcalloc(dev, desc->num_threads,
+				    sizeof(*drv->threads), GFP_KERNEL);
+	if (!drv->threads)
+		return -ENOMEM;
+
+	drv->cell_data.num_domains = desc->num_threads;
+	drv->cell_data.domains = devm_kcalloc(drv->dev,
+					      drv->cell_data.num_domains,
+					      sizeof(*drv->cell_data.domains),
+					      GFP_KERNEL);
+	if (!drv->cell_data.domains)
+		return -ENOMEM;
+
+	if (data->acc_desc)
+		drv->acc_desc = data->acc_desc;
+
+	mutex_init(&drv->lock);
+
+	if (desc->cpr_type < CTRL_TYPE_CPRH) {
+		np = of_parse_phandle(dev->of_node, "acc-syscon", 0);
+		if (!np)
+			return -ENODEV;
+
+		drv->tcsr = syscon_node_to_regmap(np);
+		of_node_put(np);
+		if (IS_ERR(drv->tcsr))
+			return PTR_ERR(drv->tcsr);
+	}
+
+	ret = cpr3_resources_init(pdev, drv);
+	if (ret)
+		return ret;
+
+	drv->irq = platform_get_irq_optional(pdev, 0);
+	if ((desc->cpr_type != CTRL_TYPE_CPRH) && (drv->irq < 0))
+		return -EINVAL;
+
+	/* On CPRhardened, vreg access it not allowed */
+	drv->vreg = devm_regulator_get_optional(dev, "vdd");
+	if (desc->cpr_type != CTRL_TYPE_CPRH && IS_ERR(drv->vreg))
+		return PTR_ERR(drv->vreg);
+
+	/*
+	 * On at least CPRhardened, vreg is unaccessible and there is no
+	 * way to read linear step from that regulator, hence it is hardcoded
+	 * in the driver;
+	 * When the vreg_step is not declared in the cpr data (or is zero),
+	 * then having access to the vreg regulator is mandatory, as this
+	 * will be retrieved through the regulator API.
+	 */
+	if (desc->vreg_step_fixed)
+		drv->vreg_step = desc->vreg_step_fixed;
+	else
+		drv->vreg_step = regulator_get_linear_step(drv->vreg);
+
+	if (!drv->vreg_step)
+		return -EINVAL;
+
+	/*
+	 * Initialize fuse corners, since it simply depends
+	 * on data in efuses.
+	 * Everything related to (virtual) corners has to be
+	 * initialized after attaching to the power domain,
+	 * since it depends on the CPU's OPP table.
+	 */
+	ret = nvmem_cell_read_variable_le_u32(dev, "cpr_fuse_revision", &drv->fusing_rev);
+	if (ret)
+		return ret;
+
+	ret = nvmem_cell_read_variable_le_u32(dev, "cpr_speed_bin", &drv->speed_bin);
+	if (ret)
+		return ret;
+
+	/*
+	 * Some SoCs require extra corners for MEM-ACC or APM: if
+	 * the related parameters have been specified, then reserve
+	 * a corner for the APM and/or MEM-ACC crossover, used by
+	 * OSM and CPRh HW to set the supply voltage during the APM
+	 * and/or MEM-ACC switch routine.
+	 */
+	if (desc->cpr_type == CTRL_TYPE_CPRH) {
+		if (desc->apm_crossover && desc->apm_hysteresis >= 0)
+			drv->extra_corners++;
+
+		if (desc->mem_acc_threshold)
+			drv->extra_corners++;
+	}
+
+	/* Initialize all threads */
+	for (i = 0; i < desc->num_threads; i++) {
+		ret = cpr_thread_init(drv, i);
+		if (ret)
+			return ret;
+	}
+
+	/* Initialize global parameters */
+	ret = cpr3_init_parameters(drv);
+	if (ret)
+		return ret;
+
+	/* Write initial configuration on all threads */
+	for (i = 0; i < desc->num_threads; i++) {
+		ret = cpr_configure(&drv->threads[i]);
+		if (ret)
+			return ret;
+	}
+
+	ret = of_genpd_add_provider_onecell(dev->of_node, &drv->cell_data);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, drv);
+	cpr3_debugfs_init(drv);
+
+	return 0;
+}
+
+static int cpr_remove(struct platform_device *pdev)
+{
+	struct cpr_drv *drv = platform_get_drvdata(pdev);
+	int i;
+
+	of_genpd_del_provider(pdev->dev.of_node);
+
+	for (i = 0; i < drv->desc->num_threads; i++) {
+		cpr_ctl_disable(&drv->threads[i]);
+		cpr_irq_set(&drv->threads[i], 0);
+		pm_genpd_remove(&drv->threads[i].pd);
+	}
+
+	debugfs_remove_recursive(drv->debugfs);
+
+	return 0;
+}
+
+static const struct of_device_id cpr3_match_table[] = {
+	{ .compatible = "qcom,msm8998-cprh", .data = &msm8998_cpr_acc_desc },
+	{ .compatible = "qcom,sdm630-cprh", .data = &sdm630_cpr_acc_desc },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cpr3_match_table);
+
+static struct platform_driver cpr3_driver = {
+	.probe		= cpr_probe,
+	.remove		= cpr_remove,
+	.driver		= {
+		.name	= "qcom-cpr3",
+		.of_match_table = cpr3_match_table,
+	},
+};
+module_platform_driver(cpr3_driver)
+
+MODULE_DESCRIPTION("Core Power Reduction (CPR) v3/v4 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/soc/qcom/cpr.h b/include/soc/qcom/cpr.h
new file mode 100644
index 000000000000..2ba4324d18f6
--- /dev/null
+++ b/include/soc/qcom/cpr.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2013-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019 Linaro Limited
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+#ifndef __CPR_H__
+#define __CPR_H__
+
+struct cpr_ext_data {
+	int mem_acc_threshold_uV;
+	int apm_threshold_uV;
+};
+
+#endif /* __CPR_H__ */
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v7 5/6] MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver
  2021-09-01 15:57 [PATCH v7 0/6] Add support for Core Power Reduction v3, v4 and Hardened AngeloGioacchino Del Regno
                   ` (3 preceding siblings ...)
  2021-09-01 15:57 ` [PATCH v7 4/6] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened AngeloGioacchino Del Regno
@ 2021-09-01 15:57 ` AngeloGioacchino Del Regno
  2021-09-01 15:57 ` [PATCH v7 6/6] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver AngeloGioacchino Del Regno
  5 siblings, 0 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-01 15:57 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, lgirdwood, broonie, linux-arm-msm, devicetree,
	linux-kernel, phone-devel, konrad.dybcio, marijn.suijten,
	jami.kettunen, paul.bouchara, martin.botka,
	~postmarketos/upstreaming, jeffrey.l.hugo, robh,
	AngeloGioacchino Del Regno

Add maintainers entry for the Qualcomm CPR3/CPR4/CPRh driver.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 MAINTAINERS | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 90f1db301fae..abff8d4555f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15493,6 +15493,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
 F:	drivers/soc/qcom/cpr.c
 
+QUALCOMM CORE POWER REDUCTION v3/v4/Hardened AVS DRIVER
+M:	AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+S:	Maintained
+F:	Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
+F:	drivers/soc/qcom/cpr3.c
+
 QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
 M:	Ilia Lin <ilia.lin@kernel.org>
 L:	linux-pm@vger.kernel.org
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v7 6/6] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver
  2021-09-01 15:57 [PATCH v7 0/6] Add support for Core Power Reduction v3, v4 and Hardened AngeloGioacchino Del Regno
                   ` (4 preceding siblings ...)
  2021-09-01 15:57 ` [PATCH v7 5/6] MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver AngeloGioacchino Del Regno
@ 2021-09-01 15:57 ` AngeloGioacchino Del Regno
  5 siblings, 0 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-01 15:57 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, lgirdwood, broonie, linux-arm-msm, devicetree,
	linux-kernel, phone-devel, konrad.dybcio, marijn.suijten,
	jami.kettunen, paul.bouchara, martin.botka,
	~postmarketos/upstreaming, jeffrey.l.hugo, robh,
	AngeloGioacchino Del Regno

Add the bindings for the CPR3 driver to the documentation.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/soc/qcom/qcom,cpr3.yaml          | 241 ++++++++++++++++++
 1 file changed, 241 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
new file mode 100644
index 000000000000..c22af61c12d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Core Power Reduction v3/v4/Hardened (CPR3, CPR4, CPRh)
+
+description: |
+  CPR (Core Power Reduction) is a technology to reduce core power on a CPU
+  or other device. Each OPP of a device corresponds to a "corner" that has
+  a range of valid voltages for a particular frequency. While the device is
+  running at a particular frequency, CPR monitors dynamic factors such as
+  temperature, etc. and suggests or, in the CPR-Hardened case performs,
+  adjustments to the voltage to save power and meet silicon characteristic
+  requirements.
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+properties:
+  compatible:
+    oneOf:
+      - description: CPRv3 controller
+        items:
+          - const: qcom,cpr3
+      - description: CPRv4 controller
+        items:
+          - const: qcom,cpr4
+      - description: CPRv4-Hardened controller
+        items:
+          - enum:
+              - qcom,msm8998-cprh
+              - qcom,sdm630-cprh
+          - const: qcom,cprh
+
+  reg:
+    description: Base address and size of the CPR controller(s)
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: "ref"
+
+  clocks:
+    items:
+      - description: CPR reference clock
+
+  vdd-supply:
+    description: Autonomous Phase Control (APC) or other power supply
+
+  '#power-domain-cells':
+    const: 1
+
+  acc-syscon:
+    description: phandle to syscon for writing ACC settings
+
+  nvmem-cells:
+    description: Cells containing the fuse corners and revision data
+    minItems: 10
+    maxItems: 32
+
+  nvmem-cell-names:
+    minItems: 10
+    maxItems: 32
+
+  operating-points-v2: true
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - "#power-domain-cells"
+  - nvmem-cells
+  - nvmem-cell-names
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    cpus {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,kryo280";
+            device_type = "cpu";
+            reg = <0x0 0x0>;
+            operating-points-v2 = <&cpu_gold_opp_table>;
+            power-domains = <&apc_cprh 0>;
+            power-domain-names = "cprh";
+        };
+
+        cpu@100 {
+            compatible = "qcom,kryo280";
+            device_type = "cpu";
+            reg = <0x0 0x0>;
+            operating-points-v2 = <&cpu_silver_opp_table>;
+            power-domains = <&apc_cprh 1>;
+            power-domain-names = "cprh";
+        };
+    };
+
+    cpu_gold_opp_table: opp-table-gold {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-2208000000 {
+            opp-hz = /bits/ 64 <2208000000>;
+            required-opps = <&cprh_opp3>;
+        };
+        opp-1113600000 {
+            opp-hz = /bits/ 64 <1113600000>;
+            required-opps = <&cprh_opp2>;
+        };
+        opp-300000000 {
+            opp-hz = /bits/ 64 <300000000>;
+            required-opps = <&cprh_opp1>;
+        };
+    };
+
+    cpu_silver_opp_table: opp-table-silver {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1843200000 {
+            opp-hz = /bits/ 64 <1843200000>;
+            required-opps = <&cprh_opp3>;
+        };
+        opp-1094400000 {
+            opp-hz = /bits/ 64 <1094400000>;
+            required-opps = <&cprh_opp2>;
+        };
+        opp-300000000 {
+            opp-hz = /bits/ 64 <300000000>;
+            required-opps = <&cprh_opp1>;
+        };
+    };
+
+    cprh_opp_table: opp-table-cprh {
+        compatible = "operating-points-v2-qcom-level";
+
+        cprh_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cprh_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cprh_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <2 3>;
+        };
+    };
+
+    apc_cprh: power-controller@179c8000 {
+        compatible = "qcom,msm8998-cprh", "qcom,cprh";
+        reg = <0x0179c8000 0x4000>, <0x0179c4000 0x4000>;
+        clocks = <&gcc GCC_HMSS_RBCPR_CLK>;
+        clock-names = "ref";
+
+        #power-domain-cells = <1>;
+        operating-points-v2 = <&cprh_opp_table>;
+
+        nvmem-cells = <&cpr_efuse_speedbin>,
+                      <&cpr_fuse_revision>,
+                      <&cpr_quot0_pwrcl>,
+                      <&cpr_quot1_pwrcl>,
+                      <&cpr_quot2_pwrcl>,
+                      <&cpr_quot3_pwrcl>,
+                      <&cpr_quot_offset1_pwrcl>,
+                      <&cpr_quot_offset2_pwrcl>,
+                      <&cpr_quot_offset3_pwrcl>,
+                      <&cpr_init_voltage0_pwrcl>,
+                      <&cpr_init_voltage1_pwrcl>,
+                      <&cpr_init_voltage2_pwrcl>,
+                      <&cpr_init_voltage3_pwrcl>,
+                      <&cpr_ro_sel0_pwrcl>,
+                      <&cpr_ro_sel1_pwrcl>,
+                      <&cpr_ro_sel2_pwrcl>,
+                      <&cpr_ro_sel3_pwrcl>,
+                      <&cpr_quot0_perfcl>,
+                      <&cpr_quot1_perfcl>,
+                      <&cpr_quot2_perfcl>,
+                      <&cpr_quot3_perfcl>,
+                      <&cpr_quot_offset1_perfcl>,
+                      <&cpr_quot_offset2_perfcl>,
+                      <&cpr_quot_offset3_perfcl>,
+                      <&cpr_init_voltage0_perfcl>,
+                      <&cpr_init_voltage1_perfcl>,
+                      <&cpr_init_voltage2_perfcl>,
+                      <&cpr_init_voltage3_perfcl>,
+                      <&cpr_ro_sel0_perfcl>,
+                      <&cpr_ro_sel1_perfcl>,
+                      <&cpr_ro_sel2_perfcl>,
+                      <&cpr_ro_sel3_perfcl>;
+
+        nvmem-cell-names = "cpr_speed_bin",
+                           "cpr_fuse_revision",
+                           "cpr0_quotient1",
+                           "cpr0_quotient2",
+                           "cpr0_quotient3",
+                           "cpr0_quotient4",
+                           "cpr0_quotient_offset2",
+                           "cpr0_quotient_offset3",
+                           "cpr0_quotient_offset4",
+                           "cpr0_init_voltage1",
+                           "cpr0_init_voltage2",
+                           "cpr0_init_voltage3",
+                           "cpr0_init_voltage4",
+                           "cpr0_ring_osc1",
+                           "cpr0_ring_osc2",
+                           "cpr0_ring_osc3",
+                           "cpr0_ring_osc4",
+                           "cpr1_quotient1",
+                           "cpr1_quotient2",
+                           "cpr1_quotient3",
+                           "cpr1_quotient4",
+                           "cpr1_quotient_offset2",
+                           "cpr1_quotient_offset3",
+                           "cpr1_quotient_offset4",
+                           "cpr1_init_voltage1",
+                           "cpr1_init_voltage2",
+                           "cpr1_init_voltage3",
+                           "cpr1_init_voltage4",
+                           "cpr1_ring_osc1",
+                           "cpr1_ring_osc2",
+                           "cpr1_ring_osc3",
+                           "cpr1_ring_osc4";
+    };
+...
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCH v7 2/6] dt-bindings: avs: cpr: Convert binding to YAML schema
  2021-09-01 15:57 ` [PATCH v7 2/6] dt-bindings: avs: cpr: Convert binding to YAML schema AngeloGioacchino Del Regno
@ 2021-09-07 18:28   ` Rob Herring
  2021-09-20  0:51   ` Bjorn Andersson
  1 sibling, 0 replies; 10+ messages in thread
From: Rob Herring @ 2021-09-07 18:28 UTC (permalink / raw)
  To: AngeloGioacchino Del Regno
  Cc: bjorn.andersson, agross, lgirdwood, broonie, linux-arm-msm,
	devicetree, linux-kernel, phone-devel, konrad.dybcio,
	marijn.suijten, jami.kettunen, paul.bouchara, martin.botka,
	~postmarketos/upstreaming, jeffrey.l.hugo

On Wed, Sep 01, 2021 at 05:57:31PM +0200, AngeloGioacchino Del Regno wrote:
> Convert the qcom,cpr.txt document to YAML schema and place it in the
> appropriate directory, since this driver was moved from power/avs
> to soc/qcom, but forgets to move the documentation.
> 
> Fixes: a7305e684fcf ("PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers")
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> ---
>  .../bindings/power/avs/qcom,cpr.txt           | 131 +-------------
>  .../bindings/soc/qcom/qcom,cpr.yaml           | 167 ++++++++++++++++++
>  MAINTAINERS                                   |   2 +-
>  3 files changed, 169 insertions(+), 131 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml


> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
> new file mode 100644
> index 000000000000..20f65427c762
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
> @@ -0,0 +1,167 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm Core Power Reduction (CPR)
> +
> +description: |
> +  CPR (Core Power Reduction) is a technology to reduce core power on a CPU
> +  or other device. Each OPP of a device corresponds to a "corner" that has
> +  a range of valid voltages for a particular frequency. While the device is
> +  running at a particular frequency, CPR monitors dynamic factors such as
> +  temperature, etc. and suggests adjustments to the voltage to save power
> +  and meet silicon characteristic requirements.
> +
> +maintainers:
> +  - Niklas Cassel <nks@flawful.org>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,qcs404-cpr
> +      - const: qcom,cpr
> +
> +  reg:
> +    description: Base address and size of the RBCPR register region
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: ref
> +
> +  clocks:
> +    items:
> +      - description: CPR reference clock
> +
> +  vdd-apc-supply:
> +    description: Autonomous Phase Control (APC) power supply
> +
> +  '#power-domain-cells':
> +    const: 0
> +
> +  acc-syscon:
> +    description: phandle to syscon for writing ACC settings

Needs a type reference.

> +
> +  nvmem-cells:
> +    minItems: 9
> +    maxItems: 32
> +    description: Cells containing the fuse corners and revision data
> +
> +  nvmem-cell-names:
> +    minItems: 9
> +    maxItems: 32

There were a bunch of names defined that you dropped.

> +
> +  operating-points-v2: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clock-names
> +  - clocks
> +  - vdd-apc-supply
> +  - "#power-domain-cells"
> +  - nvmem-cells
> +  - nvmem-cell-names
> +  - operating-points-v2
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    cpus {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        cpu@100 {
> +            compatible = "arm,cortex-a53";
> +            device_type = "cpu";
> +            reg = <0x100>;
> +            operating-points-v2 = <&cpu_opp_table>;
> +            power-domains = <&cpr>;
> +            power-domain-names = "cpr";
> +        };
> +    };
> +
> +    cpu_opp_table: opp-table-cpu {
> +        compatible = "operating-points-v2-kryo-cpu";
> +        opp-shared;
> +
> +        opp-1094400000 {
> +            opp-hz = /bits/ 64 <1094400000>;
> +            required-opps = <&cpr_opp1>;
> +        };
> +        opp-1248000000 {
> +            opp-hz = /bits/ 64 <1248000000>;
> +            required-opps = <&cpr_opp2>;
> +        };
> +        opp-1401600000 {
> +            opp-hz = /bits/ 64 <1401600000>;
> +            required-opps = <&cpr_opp3>;
> +        };
> +    };
> +
> +    cpr_opp_table: opp-table-cpr {
> +        compatible = "operating-points-v2-qcom-level";
> +
> +        cpr_opp1: opp1 {
> +            opp-level = <1>;
> +            qcom,opp-fuse-level = <1>;
> +        };
> +        cpr_opp2: opp2 {
> +            opp-level = <2>;
> +            qcom,opp-fuse-level = <2>;
> +        };
> +        cpr_opp3: opp3 {
> +            opp-level = <3>;
> +            qcom,opp-fuse-level = <3>;
> +        };
> +    };
> +
> +    power-controller@b018000 {
> +        compatible = "qcom,qcs404-cpr", "qcom,cpr";
> +        reg = <0x0b018000 0x1000>;
> +        interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
> +        clocks = <&xo_board>;
> +        clock-names = "ref";
> +        vdd-apc-supply = <&pms405_s3>;
> +        #power-domain-cells = <0>;
> +        operating-points-v2 = <&cpr_opp_table>;
> +        acc-syscon = <&tcsr>;
> +
> +        nvmem-cells = <&cpr_efuse_quot_offset1>,
> +                      <&cpr_efuse_quot_offset2>,
> +                      <&cpr_efuse_quot_offset3>,
> +                      <&cpr_efuse_init_voltage1>,
> +                      <&cpr_efuse_init_voltage2>,
> +                      <&cpr_efuse_init_voltage3>,
> +                      <&cpr_efuse_quot1>,
> +                      <&cpr_efuse_quot2>,
> +                      <&cpr_efuse_quot3>,
> +                      <&cpr_efuse_ring1>,
> +                      <&cpr_efuse_ring2>,
> +                      <&cpr_efuse_ring3>,
> +                      <&cpr_efuse_revision>;
> +        nvmem-cell-names = "cpr0_quotient_offset1",
> +                           "cpr0_quotient_offset2",
> +                           "cpr0_quotient_offset3",
> +                           "cpr0_init_voltage1",
> +                           "cpr0_init_voltage2",
> +                           "cpr0_init_voltage3",
> +                           "cpr0_quotient1",
> +                           "cpr0_quotient2",
> +                           "cpr0_quotient3",
> +                           "cpr0_ring_osc1",
> +                           "cpr0_ring_osc2",
> +                           "cpr0_ring_osc3",
> +                           "cpr_fuse_revision";
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f58dad1a1922..90f1db301fae 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15490,7 +15490,7 @@ M:	Niklas Cassel <nks@flawful.org>
>  L:	linux-pm@vger.kernel.org
>  L:	linux-arm-msm@vger.kernel.org
>  S:	Maintained
> -F:	Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
> +F:	Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
>  F:	drivers/soc/qcom/cpr.c
>  
>  QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
> -- 
> 2.32.0
> 
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v7 2/6] dt-bindings: avs: cpr: Convert binding to YAML schema
  2021-09-01 15:57 ` [PATCH v7 2/6] dt-bindings: avs: cpr: Convert binding to YAML schema AngeloGioacchino Del Regno
  2021-09-07 18:28   ` Rob Herring
@ 2021-09-20  0:51   ` Bjorn Andersson
  1 sibling, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2021-09-20  0:51 UTC (permalink / raw)
  To: AngeloGioacchino Del Regno
  Cc: agross, robh+dt, lgirdwood, broonie, linux-arm-msm, devicetree,
	linux-kernel, phone-devel, konrad.dybcio, marijn.suijten,
	jami.kettunen, paul.bouchara, martin.botka,
	~postmarketos/upstreaming, jeffrey.l.hugo, robh

On Wed 01 Sep 10:57 CDT 2021, AngeloGioacchino Del Regno wrote:

> Convert the qcom,cpr.txt document to YAML schema and place it in the
> appropriate directory, since this driver was moved from power/avs
> to soc/qcom, but forgets to move the documentation.
> 
> Fixes: a7305e684fcf ("PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers")

I don't see it to be a requirement that the DT binding structure follows
the Linux implementation structure, so I think it's appropriate to keep
it in power/avs and I don't think it deserves a fixes.


I would like to merge this series, could you please address Rob's
concerns on the binding?


PS. If you did the YAML-ification as the last step I would have merged
the other 5 patches...

Thanks,
Bjorn

> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> ---
>  .../bindings/power/avs/qcom,cpr.txt           | 131 +-------------
>  .../bindings/soc/qcom/qcom,cpr.yaml           | 167 ++++++++++++++++++
>  MAINTAINERS                                   |   2 +-
>  3 files changed, 169 insertions(+), 131 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
> 
> diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
> index ab0d5ebbad4e..2ada8cd08949 100644
> --- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
> +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
> @@ -1,130 +1 @@
> -QCOM CPR (Core Power Reduction)
> -
> -CPR (Core Power Reduction) is a technology to reduce core power on a CPU
> -or other device. Each OPP of a device corresponds to a "corner" that has
> -a range of valid voltages for a particular frequency. While the device is
> -running at a particular frequency, CPR monitors dynamic factors such as
> -temperature, etc. and suggests adjustments to the voltage to save power
> -and meet silicon characteristic requirements.
> -
> -- compatible:
> -	Usage: required
> -	Value type: <string>
> -	Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404
> -
> -- reg:
> -	Usage: required
> -	Value type: <prop-encoded-array>
> -	Definition: base address and size of the rbcpr register region
> -
> -- interrupts:
> -	Usage: required
> -	Value type: <prop-encoded-array>
> -	Definition: should specify the CPR interrupt
> -
> -- clocks:
> -	Usage: required
> -	Value type: <prop-encoded-array>
> -	Definition: phandle to the reference clock
> -
> -- clock-names:
> -	Usage: required
> -	Value type: <stringlist>
> -	Definition: must be "ref"
> -
> -- vdd-apc-supply:
> -	Usage: required
> -	Value type: <phandle>
> -	Definition: phandle to the vdd-apc-supply regulator
> -
> -- #power-domain-cells:
> -	Usage: required
> -	Value type: <u32>
> -	Definition: should be 0
> -
> -- operating-points-v2:
> -	Usage: required
> -	Value type: <phandle>
> -	Definition: A phandle to the OPP table containing the
> -		    performance states supported by the CPR
> -		    power domain
> -
> -- acc-syscon:
> -	Usage: optional
> -	Value type: <phandle>
> -	Definition: phandle to syscon for writing ACC settings
> -
> -- nvmem-cells:
> -	Usage: required
> -	Value type: <phandle>
> -	Definition: phandle to nvmem cells containing the data
> -		    that makes up a fuse corner, for each fuse corner.
> -		    As well as the CPR fuse revision.
> -
> -- nvmem-cell-names:
> -	Usage: required
> -	Value type: <stringlist>
> -	Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2",
> -		    "cpr_quotient_offset3", "cpr_init_voltage1",
> -		    "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1",
> -		    "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1",
> -		    "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision"
> -		    for qcs404.
> -
> -Example:
> -
> -	cpr_opp_table: cpr-opp-table {
> -		compatible = "operating-points-v2-qcom-level";
> -
> -		cpr_opp1: opp1 {
> -			opp-level = <1>;
> -			qcom,opp-fuse-level = <1>;
> -		};
> -		cpr_opp2: opp2 {
> -			opp-level = <2>;
> -			qcom,opp-fuse-level = <2>;
> -		};
> -		cpr_opp3: opp3 {
> -			opp-level = <3>;
> -			qcom,opp-fuse-level = <3>;
> -		};
> -	};
> -
> -	power-controller@b018000 {
> -		compatible = "qcom,qcs404-cpr", "qcom,cpr";
> -		reg = <0x0b018000 0x1000>;
> -		interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
> -		clocks = <&xo_board>;
> -		clock-names = "ref";
> -		vdd-apc-supply = <&pms405_s3>;
> -		#power-domain-cells = <0>;
> -		operating-points-v2 = <&cpr_opp_table>;
> -		acc-syscon = <&tcsr>;
> -
> -		nvmem-cells = <&cpr_efuse_quot_offset1>,
> -			<&cpr_efuse_quot_offset2>,
> -			<&cpr_efuse_quot_offset3>,
> -			<&cpr_efuse_init_voltage1>,
> -			<&cpr_efuse_init_voltage2>,
> -			<&cpr_efuse_init_voltage3>,
> -			<&cpr_efuse_quot1>,
> -			<&cpr_efuse_quot2>,
> -			<&cpr_efuse_quot3>,
> -			<&cpr_efuse_ring1>,
> -			<&cpr_efuse_ring2>,
> -			<&cpr_efuse_ring3>,
> -			<&cpr_efuse_revision>;
> -		nvmem-cell-names = "cpr_quotient_offset1",
> -			"cpr_quotient_offset2",
> -			"cpr_quotient_offset3",
> -			"cpr_init_voltage1",
> -			"cpr_init_voltage2",
> -			"cpr_init_voltage3",
> -			"cpr_quotient1",
> -			"cpr_quotient2",
> -			"cpr_quotient3",
> -			"cpr_ring_osc1",
> -			"cpr_ring_osc2",
> -			"cpr_ring_osc3",
> -			"cpr_fuse_revision";
> -	};
> +This file has been moved to ../../soc/qcom/qcom,cpr.yaml
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
> new file mode 100644
> index 000000000000..20f65427c762
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
> @@ -0,0 +1,167 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm Core Power Reduction (CPR)
> +
> +description: |
> +  CPR (Core Power Reduction) is a technology to reduce core power on a CPU
> +  or other device. Each OPP of a device corresponds to a "corner" that has
> +  a range of valid voltages for a particular frequency. While the device is
> +  running at a particular frequency, CPR monitors dynamic factors such as
> +  temperature, etc. and suggests adjustments to the voltage to save power
> +  and meet silicon characteristic requirements.
> +
> +maintainers:
> +  - Niklas Cassel <nks@flawful.org>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,qcs404-cpr
> +      - const: qcom,cpr
> +
> +  reg:
> +    description: Base address and size of the RBCPR register region
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: ref
> +
> +  clocks:
> +    items:
> +      - description: CPR reference clock
> +
> +  vdd-apc-supply:
> +    description: Autonomous Phase Control (APC) power supply
> +
> +  '#power-domain-cells':
> +    const: 0
> +
> +  acc-syscon:
> +    description: phandle to syscon for writing ACC settings
> +
> +  nvmem-cells:
> +    minItems: 9
> +    maxItems: 32
> +    description: Cells containing the fuse corners and revision data
> +
> +  nvmem-cell-names:
> +    minItems: 9
> +    maxItems: 32
> +
> +  operating-points-v2: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clock-names
> +  - clocks
> +  - vdd-apc-supply
> +  - "#power-domain-cells"
> +  - nvmem-cells
> +  - nvmem-cell-names
> +  - operating-points-v2
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    cpus {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        cpu@100 {
> +            compatible = "arm,cortex-a53";
> +            device_type = "cpu";
> +            reg = <0x100>;
> +            operating-points-v2 = <&cpu_opp_table>;
> +            power-domains = <&cpr>;
> +            power-domain-names = "cpr";
> +        };
> +    };
> +
> +    cpu_opp_table: opp-table-cpu {
> +        compatible = "operating-points-v2-kryo-cpu";
> +        opp-shared;
> +
> +        opp-1094400000 {
> +            opp-hz = /bits/ 64 <1094400000>;
> +            required-opps = <&cpr_opp1>;
> +        };
> +        opp-1248000000 {
> +            opp-hz = /bits/ 64 <1248000000>;
> +            required-opps = <&cpr_opp2>;
> +        };
> +        opp-1401600000 {
> +            opp-hz = /bits/ 64 <1401600000>;
> +            required-opps = <&cpr_opp3>;
> +        };
> +    };
> +
> +    cpr_opp_table: opp-table-cpr {
> +        compatible = "operating-points-v2-qcom-level";
> +
> +        cpr_opp1: opp1 {
> +            opp-level = <1>;
> +            qcom,opp-fuse-level = <1>;
> +        };
> +        cpr_opp2: opp2 {
> +            opp-level = <2>;
> +            qcom,opp-fuse-level = <2>;
> +        };
> +        cpr_opp3: opp3 {
> +            opp-level = <3>;
> +            qcom,opp-fuse-level = <3>;
> +        };
> +    };
> +
> +    power-controller@b018000 {
> +        compatible = "qcom,qcs404-cpr", "qcom,cpr";
> +        reg = <0x0b018000 0x1000>;
> +        interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
> +        clocks = <&xo_board>;
> +        clock-names = "ref";
> +        vdd-apc-supply = <&pms405_s3>;
> +        #power-domain-cells = <0>;
> +        operating-points-v2 = <&cpr_opp_table>;
> +        acc-syscon = <&tcsr>;
> +
> +        nvmem-cells = <&cpr_efuse_quot_offset1>,
> +                      <&cpr_efuse_quot_offset2>,
> +                      <&cpr_efuse_quot_offset3>,
> +                      <&cpr_efuse_init_voltage1>,
> +                      <&cpr_efuse_init_voltage2>,
> +                      <&cpr_efuse_init_voltage3>,
> +                      <&cpr_efuse_quot1>,
> +                      <&cpr_efuse_quot2>,
> +                      <&cpr_efuse_quot3>,
> +                      <&cpr_efuse_ring1>,
> +                      <&cpr_efuse_ring2>,
> +                      <&cpr_efuse_ring3>,
> +                      <&cpr_efuse_revision>;
> +        nvmem-cell-names = "cpr0_quotient_offset1",
> +                           "cpr0_quotient_offset2",
> +                           "cpr0_quotient_offset3",
> +                           "cpr0_init_voltage1",
> +                           "cpr0_init_voltage2",
> +                           "cpr0_init_voltage3",
> +                           "cpr0_quotient1",
> +                           "cpr0_quotient2",
> +                           "cpr0_quotient3",
> +                           "cpr0_ring_osc1",
> +                           "cpr0_ring_osc2",
> +                           "cpr0_ring_osc3",
> +                           "cpr_fuse_revision";
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f58dad1a1922..90f1db301fae 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15490,7 +15490,7 @@ M:	Niklas Cassel <nks@flawful.org>
>  L:	linux-pm@vger.kernel.org
>  L:	linux-arm-msm@vger.kernel.org
>  S:	Maintained
> -F:	Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
> +F:	Documentation/devicetree/bindings/soc/qcom/qcom,cpr.yaml
>  F:	drivers/soc/qcom/cpr.c
>  
>  QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
> -- 
> 2.32.0
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v7 1/6] soc: qcom: cpr: Move common functions to new file
  2021-09-01 15:57 ` [PATCH v7 1/6] soc: qcom: cpr: Move common functions to new file AngeloGioacchino Del Regno
@ 2021-10-15 11:15   ` Vladimir Zapolskiy
  0 siblings, 0 replies; 10+ messages in thread
From: Vladimir Zapolskiy @ 2021-10-15 11:15 UTC (permalink / raw)
  To: AngeloGioacchino Del Regno, bjorn.andersson
  Cc: agross, robh+dt, lgirdwood, broonie, linux-arm-msm, devicetree,
	linux-kernel, phone-devel, konrad.dybcio, marijn.suijten,
	jami.kettunen, paul.bouchara, martin.botka,
	~postmarketos/upstreaming, jeffrey.l.hugo, robh

Hi AngeloGioacchino,

On 9/1/21 6:57 PM, AngeloGioacchino Del Regno wrote:
> In preparation for implementing a new driver that will be handling
> CPRv3, CPRv4 and CPR-Hardened, format out common functions to a new
> file.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> ---
>   drivers/soc/qcom/Makefile     |   2 +-
>   drivers/soc/qcom/cpr-common.c | 362 ++++++++++++++++++++++++++++++
>   drivers/soc/qcom/cpr-common.h | 111 ++++++++++
>   drivers/soc/qcom/cpr.c        | 399 ++--------------------------------
>   4 files changed, 497 insertions(+), 377 deletions(-)
>   create mode 100644 drivers/soc/qcom/cpr-common.c
>   create mode 100644 drivers/soc/qcom/cpr-common.h
> 
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index ad675a6593d0..8d1262a2e23c 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -3,7 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src)
>   obj-$(CONFIG_QCOM_AOSS_QMP) +=	qcom_aoss.o
>   obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
>   obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
> -obj-$(CONFIG_QCOM_CPR)		+= cpr.o
> +obj-$(CONFIG_QCOM_CPR)		+= cpr-common.o cpr.o
>   obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
>   obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
>   obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o
> diff --git a/drivers/soc/qcom/cpr-common.c b/drivers/soc/qcom/cpr-common.c
> new file mode 100644
> index 000000000000..41fcc5863e72
> --- /dev/null
> +++ b/drivers/soc/qcom/cpr-common.c
> @@ -0,0 +1,362 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2019, Linaro Limited
> + */
> +
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/debugfs.h>
> +#include <linux/string.h>
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/bitops.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/pm_opp.h>
> +#include <linux/interrupt.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>

Please consider to sort the list of included headers alphabetically,
also I find that some of them are not needed, for instance the two
includes above are definitely excessive.

I understand that the list have been just copied, nevertheless, it
might be a good opportunity to shrink it.

> +#include <linux/regulator/consumer.h>
> +#include <linux/clk.h>
> +#include <linux/nvmem-consumer.h>
> +#include "cpr-common.h"
> +
> +int cpr_populate_ring_osc_idx(struct device *dev,
> +			      struct fuse_corner *fuse_corner,
> +			      const struct cpr_fuse *cpr_fuse,
> +			      int num_fuse_corners)
> +{
> +	struct fuse_corner *end = fuse_corner + num_fuse_corners;
> +	u32 data;
> +	int ret;
> +
> +	for (; fuse_corner < end; fuse_corner++, cpr_fuse++) {
> +		ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->ring_osc, &data);
> +		if (ret)
> +			return ret;
> +		fuse_corner->ring_osc_idx = data;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(cpr_populate_ring_osc_idx);
> +
> +int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV,
> +		     int adj, int step_volt, const char *init_v_efuse,
> +		     struct device *dev)
> +{
> +	int steps, uV;
> +	u32 bits = 0;
> +	int ret;
> +
> +	ret = nvmem_cell_read_variable_le_u32(dev, init_v_efuse, &bits);
> +	if (ret)
> +		return ret;
> +
> +	steps = bits & (BIT(init_v_width - 1) - 1);
> +	/* Not two's complement.. instead highest bit is sign bit */
> +	if (bits & BIT(init_v_width - 1))
> +		steps = -steps;
> +
> +	uV = ref_uV + steps * step_size_uV;
> +
> +	/* Apply open-loop fixed adjustments to fused values */
> +	uV += adj;
> +
> +	return DIV_ROUND_UP(uV, step_volt) * step_volt;
> +}
> +EXPORT_SYMBOL_GPL(cpr_read_fuse_uV);

This function should be static and unexported, since I see no its users
outside of the object scope.

> +const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid,
> +				     int num_fuse_corners)

 From struct cpr_thread_desc the field 'num_fuse_corners' is unsigned,
please consider to change the type here to unsigned also.

> +{
> +	struct cpr_fuse *fuses;
> +	int i;

Then 'i' can be changed to unsigned also.

> +
> +	fuses = devm_kcalloc(dev, num_fuse_corners,
> +			     sizeof(struct cpr_fuse),

A common practice is to specify the size as 'sizeof(*fuses)'.

> +			     GFP_KERNEL);
> +	if (!fuses)
> +		return ERR_PTR(-ENOMEM);
> +
> +	for (i = 0; i < num_fuse_corners; i++) {
> +		char tbuf[50];
> +
> +		snprintf(tbuf, sizeof(tbuf), "cpr%d_ring_osc%d", tid, i + 1);
> +		fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL);
> +		if (!fuses[i].ring_osc)
> +			return ERR_PTR(-ENOMEM);
> +
> +		snprintf(tbuf, sizeof(tbuf),
> +			 "cpr%d_init_voltage%d", tid, i + 1);
> +		fuses[i].init_voltage = devm_kstrdup(dev, tbuf,
> +						     GFP_KERNEL);

It should fit into one line, no need to wrap.

> +		if (!fuses[i].init_voltage)
> +			return ERR_PTR(-ENOMEM);
> +
> +		snprintf(tbuf, sizeof(tbuf), "cpr%d_quotient%d", tid, i + 1);
> +		fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL);
> +		if (!fuses[i].quotient)
> +			return ERR_PTR(-ENOMEM);
> +
> +		snprintf(tbuf, sizeof(tbuf),
> +			 "cpr%d_quotient_offset%d", tid, i + 1);
> +		fuses[i].quotient_offset = devm_kstrdup(dev, tbuf,
> +							GFP_KERNEL);

Here as well.

> +		if (!fuses[i].quotient_offset)
> +			return ERR_PTR(-ENOMEM);
> +	}
> +
> +	return fuses;
> +}
> +EXPORT_SYMBOL_GPL(cpr_get_fuses);
> +
> +int cpr_populate_fuse_common(struct device *dev,
> +			     struct fuse_corner_data *fdata,
> +			     const struct cpr_fuse *cpr_fuse,
> +			     struct fuse_corner *fuse_corner,
> +			     int step_volt, int init_v_width,
> +			     int init_v_step)
> +{
> +	int uV, ret;
> +
> +	/* Populate uV */
> +	uV = cpr_read_fuse_uV(init_v_width, init_v_step,
> +			      fdata->ref_uV, fdata->volt_oloop_adjust,
> +			      step_volt, cpr_fuse->init_voltage, dev);
> +	if (uV < 0)
> +		return uV;
> +
> +	/*
> +	 * Update SoC voltages: platforms might choose a different
> +	 * regulators than the one used to characterize the algorithms
> +	 * (ie, init_voltage_step).
> +	 */
> +	fdata->min_uV = roundup(fdata->min_uV, step_volt);
> +	fdata->max_uV = roundup(fdata->max_uV, step_volt);
> +
> +	fuse_corner->min_uV = fdata->min_uV;
> +	fuse_corner->max_uV = fdata->max_uV;
> +	fuse_corner->uV = clamp(uV, fuse_corner->min_uV, fuse_corner->max_uV);
> +
> +	/* Populate target quotient by scaling */
> +	ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->quotient, &fuse_corner->quot);
> +	if (ret)
> +		return ret;
> +
> +	fuse_corner->quot *= fdata->quot_scale;
> +	fuse_corner->quot += fdata->quot_offset;
> +	fuse_corner->quot += fdata->quot_adjust;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(cpr_populate_fuse_common);
> +
> +/*
> + * Returns: Index of the initial corner or negative number for error.
> + */
> +int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
> +			    struct corner *corners, int num_corners)
> +{
> +	unsigned long rate;
> +	struct corner *iter, *corner;
> +	const struct corner *end;
> +	unsigned int ret = 0;
> +
> +	if (!cpu_clk)
> +		return -EINVAL;
> +
> +	end = &corners[num_corners - 1];
> +	rate = clk_get_rate(cpu_clk);
> +
> +	/*
> +	 * Some bootloaders set a CPU clock frequency that is not defined
> +	 * in the OPP table. When running at an unlisted frequency,
> +	 * cpufreq_online() will change to the OPP which has the lowest
> +	 * frequency, at or above the unlisted frequency.
> +	 * Since cpufreq_online() always "rounds up" in the case of an
> +	 * unlisted frequency, this function always "rounds down" in case
> +	 * of an unlisted frequency. That way, when cpufreq_online()
> +	 * triggers the first ever call to cpr_set_performance_state(),
> +	 * it will correctly determine the direction as UP.
> +	 */
> +	for (iter = corners; iter <= end; iter++) {
> +		if (iter->freq > rate)
> +			break;
> +		ret++;
> +		if (iter->freq == rate) {
> +			corner = iter;
> +			break;
> +		}
> +		if (iter->freq < rate)
> +			corner = iter;
> +	}
> +
> +	if (!corner) {
> +		dev_err(dev, "boot up corner not found\n");
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(dev, "boot up perf state: %u\n", ret);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(cpr_find_initial_corner);
> +
> +u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid)
> +{
> +	struct device_node *np;
> +	u32 fc;
> +
> +	np = dev_pm_opp_get_of_node(opp);
> +	if (of_property_read_u32_index(np, "qcom,opp-fuse-level", tid, &fc)) {
> +		pr_debug("%s: missing 'qcom,opp-fuse-level' property\n",
> +			 __func__);
> +		fc = 0;
> +	}
> +
> +	of_node_put(np);
> +
> +	return fc;
> +}
> +EXPORT_SYMBOL_GPL(cpr_get_fuse_corner);
> +
> +unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
> +				     struct device *cpu_dev)
> +{
> +	u64 rate = 0;
> +	struct device_node *ref_np;
> +	struct device_node *desc_np;
> +	struct device_node *child_np = NULL;
> +	struct device_node *child_req_np = NULL;
> +
> +	desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
> +	if (!desc_np)
> +		return 0;
> +
> +	ref_np = dev_pm_opp_get_of_node(ref);
> +	if (!ref_np)
> +		goto out_ref;
> +
> +	do {
> +		of_node_put(child_req_np);
> +		child_np = of_get_next_available_child(desc_np, child_np);
> +		child_req_np = of_parse_phandle(child_np, "required-opps", 0);
> +	} while (child_np && child_req_np != ref_np);

There is a potential to reuse for_each_available_child_of_node() helper.

> +
> +	if (child_np && child_req_np == ref_np)
> +		of_property_read_u64(child_np, "opp-hz", &rate);
> +
> +	of_node_put(child_req_np);
> +	of_node_put(child_np);
> +	of_node_put(ref_np);
> +out_ref:
> +	of_node_put(desc_np);
> +
> +	return (unsigned long) rate;
> +}
> +EXPORT_SYMBOL_GPL(cpr_get_opp_hz_for_req);
> +
> +int cpr_calculate_scaling(const char *quot_offset,
> +			  struct device *dev,

Please consider to make 'dev' argument as the first one in the list.

> +			  const struct fuse_corner_data *fdata,
> +			  const struct corner *corner)
> +{
> +	u32 quot_diff = 0;
> +	unsigned long freq_diff;
> +	int scaling;
> +	const struct fuse_corner *fuse, *prev_fuse;
> +	int ret;

I personally prefer a Reverse Christmas Tree Format ordering of local
variable declarations (see https://lwn.net/Articles/758552), not sure
if you'd prefer to follow it...

> +
> +	fuse = corner->fuse_corner;
> +	prev_fuse = fuse - 1;
> +
> +	if (quot_offset) {
> +		ret = nvmem_cell_read_variable_le_u32(dev, quot_offset, &quot_diff);
> +		if (ret)
> +			return ret;
> +
> +		quot_diff *= fdata->quot_offset_scale;
> +		quot_diff += fdata->quot_offset_adjust;
> +	} else {
> +		quot_diff = fuse->quot - prev_fuse->quot;
> +	}
> +
> +	freq_diff = fuse->max_freq - prev_fuse->max_freq;
> +	freq_diff /= 1000000; /* Convert to MHz */
> +	scaling = 1000 * quot_diff / freq_diff;
> +	return min(scaling, fdata->max_quot_scale);
> +}
> +EXPORT_SYMBOL_GPL(cpr_calculate_scaling);
> +
> +int cpr_interpolate(const struct corner *corner, int step_volt,
> +		    const struct fuse_corner_data *fdata)
> +{
> +	unsigned long f_high, f_low, f_diff;
> +	int uV_high, uV_low, uV;
> +	u64 temp, temp_limit;
> +	const struct fuse_corner *fuse, *prev_fuse;
> +
> +	fuse = corner->fuse_corner;
> +	prev_fuse = fuse - 1;
> +
> +	f_high = fuse->max_freq;
> +	f_low = prev_fuse->max_freq;
> +	uV_high = fuse->uV;
> +	uV_low = prev_fuse->uV;
> +	f_diff = fuse->max_freq - corner->freq;
> +
> +	/*
> +	 * Don't interpolate in the wrong direction. This could happen
> +	 * if the adjusted fuse voltage overlaps with the previous fuse's
> +	 * adjusted voltage.
> +	 */
> +	if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq)
> +		return corner->uV;
> +
> +	temp = f_diff * (uV_high - uV_low);
> +	do_div(temp, f_high - f_low);
> +
> +	/*
> +	 * max_volt_scale has units of uV/MHz while freq values
> +	 * have units of Hz.  Divide by 1000000 to convert to.
> +	 */
> +	temp_limit = f_diff * fdata->max_volt_scale;
> +	do_div(temp_limit, 1000000);
> +
> +	uV = uV_high - min(temp, temp_limit);
> +	return roundup(uV, step_volt);
> +}
> +EXPORT_SYMBOL_GPL(cpr_interpolate);
> +
> +int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg,
> +			       struct fuse_corner *f)
> +{
> +	int ret;
> +
> +	ret = regulator_is_supported_voltage(vreg, f->min_uV, f->min_uV);
> +	if (!ret) {
> +		dev_err(dev, "min uV: %d not supported by regulator\n",
> +			f->min_uV);
> +		return -EINVAL;
> +	}
> +
> +	ret = regulator_is_supported_voltage(vreg, f->max_uV, f->max_uV);
> +	if (!ret) {
> +		dev_err(dev, "max uV: %d not supported by regulator\n",
> +			f->max_uV);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(cpr_check_vreg_constraints);
> +
> +MODULE_DESCRIPTION("Core Power Reduction (CPR) common");
> +MODULE_LICENSE("GPL v2");

--
Best wishes,
Vladimir

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2021-10-15 11:15 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-01 15:57 [PATCH v7 0/6] Add support for Core Power Reduction v3, v4 and Hardened AngeloGioacchino Del Regno
2021-09-01 15:57 ` [PATCH v7 1/6] soc: qcom: cpr: Move common functions to new file AngeloGioacchino Del Regno
2021-10-15 11:15   ` Vladimir Zapolskiy
2021-09-01 15:57 ` [PATCH v7 2/6] dt-bindings: avs: cpr: Convert binding to YAML schema AngeloGioacchino Del Regno
2021-09-07 18:28   ` Rob Herring
2021-09-20  0:51   ` Bjorn Andersson
2021-09-01 15:57 ` [PATCH v7 3/6] arm64: qcom: qcs404: Change CPR nvmem-names AngeloGioacchino Del Regno
2021-09-01 15:57 ` [PATCH v7 4/6] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened AngeloGioacchino Del Regno
2021-09-01 15:57 ` [PATCH v7 5/6] MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver AngeloGioacchino Del Regno
2021-09-01 15:57 ` [PATCH v7 6/6] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver AngeloGioacchino Del Regno

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).