[PATCH v1 00/14] arm64: dts: imx8mq-librem5: updates and fixes until march 2023

[PATCH v1 00/14] arm64: dts: imx8mq-librem5: updates and fixes until march 2023

[Martin Kepplinger]

hi Shawn and all interested in the Librem 5 phone,

This is another round of updates to the phone DT description. Some are
clear fixes, but some are important updates like the CSI changes
that make the selfie cam work or the powersaving related things like
the ddrc opp table entry and voltage changes.

As previously this is all mixed together because the changes are small.
If you prefer separate, small "topic-patchsets", please say so.

thanks,
                           martin


Angus Ainslie (1):
  arm64: dts: imx8mq-librem5: add the magnetometer mount matrix

Martin Kepplinger (4):
  arm64: dts: imx8mq-librem5: lower the mipi csi 1 frequencies
  arm64: dts: imx8mq-librem5: describe the clock for the csi sensors
  arm64: dts: imx8mq-librem5: fix audio-1v8 regulator name
  arm64: dts: imx8mq-librem5: add brightness levels to led-backlight

Sebastian Krzyszkowiak (9):
  arm64: dts: imx8mq-librem5: Describe MIC_2V4 regulator
  arm64: dts: imx8mq-librem5: Set charger parameters for each batch
  arm64: dts: imx8mq-librem5: Set the DVS voltages lower
  arm64: dts: imx8mq-librem5: Bump usdhc2 frequency to 100MHz
  arm64: dts: imx8mq-librem5: Adjust proximity sensor's near levels
  arm64: dts: imx8mq-librem5: Remove dis_u3_susphy_quirk from usb_dwc3_0
  arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage to 0.81V
  arm64: dts: imx8mq-librem5: Reduce I2C frequency to 384kHz
  arm64: dts: imx8mq-librem5: Add 166MHz to DDRC OPP table

 .../boot/dts/freescale/imx8mq-librem5-r2.dts  | 12 ++--
 .../boot/dts/freescale/imx8mq-librem5-r3.dts  |  2 +-
 .../boot/dts/freescale/imx8mq-librem5-r3.dtsi | 10 ++-
 .../boot/dts/freescale/imx8mq-librem5-r4.dts  |  2 +-
 .../boot/dts/freescale/imx8mq-librem5.dtsi    | 70 ++++++++++++++-----
 5 files changed, 67 insertions(+), 29 deletions(-)

-- 
2.30.2

[PATCH v1 01/14] arm64: dts: imx8mq-librem5: lower the mipi csi 1 frequencies

[Martin Kepplinger]

No frames are streamed when using the default frequencies. I'm not yet
sure why the fastest ones don't work here but we've been using these
frequencies successfully for a long time now.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 6895bcc121651..c81cf3e6582b1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1143,6 +1143,7 @@ &lcdif {
 };
 
 &mipi_csi1 {
+	assigned-clock-rates = <266000000>, <200000000>, <66000000>;
 	status = "okay";
 
 	ports {
-- 
2.30.2

[PATCH v1 02/14] arm64: dts: imx8mq-librem5: describe the clock for the csi sensors

[Martin Kepplinger]

The CLKO2 clock is used for both camera CSI interfaces as the
driving clock for the connected sensors. In order for it to be
available, use this hog. We can't simply add it to 2 different
sensor descriptions.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index c81cf3e6582b1..fd1f6fb6d6f6f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -371,6 +371,16 @@ pmic-5v-hog {
 };
 
 &iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* CLKO2 for cameras on both CSI1 and CSI2 */
+			MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
+		>;
+	};
+
 	pinctrl_audiopwr: audiopwrgrp {
 		fsl,pins = <
 			/* AUDIO_POWER_EN_3V3 */
-- 
2.30.2

[PATCH v1 03/14] arm64: dts: imx8mq-librem5: fix audio-1v8 regulator name

[Martin Kepplinger]

Fix the regulator name for the audio-1v8 regulator.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index fd1f6fb6d6f6f..6c44af94ac02b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -84,7 +84,7 @@ reg_aud_1v8: regulator-audio-1v8 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_audiopwr>;
-		regulator-name = "AUDIO_PWR_EN";
+		regulator-name = "AUD_1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-- 
2.30.2

[PATCH v1 04/14] arm64: dts: imx8mq-librem5: Describe MIC_2V4 regulator

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

No functional change, but it describes the hardware better.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 6c44af94ac02b..9f374da5c18aa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -91,6 +91,14 @@ reg_aud_1v8: regulator-audio-1v8 {
 		enable-active-high;
 	};
 
+	reg_mic_2v4: regulator-mic-2v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "MIC_2V4";
+		regulator-min-microvolt = <2400000>;
+		regulator-max-microvolt = <2400000>;
+		vin-supply = <&reg_aud_1v8>;
+	};
+
 	/*
 	 * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC
 	 * since we can't have it twice in the 2 different regulator nodes.
@@ -1033,7 +1041,7 @@ codec: audio-codec@1a {
 		DBVDD-supply = <&reg_aud_1v8>;
 		AVDD-supply = <&reg_aud_1v8>;
 		CPVDD-supply = <&reg_aud_1v8>;
-		MICVDD-supply = <&reg_aud_1v8>;
+		MICVDD-supply = <&reg_mic_2v4>;
 		PLLVDD-supply = <&reg_aud_1v8>;
 		SPKVDD1-supply = <&reg_vsys_3v4>;
 		SPKVDD2-supply = <&reg_vsys_3v4>;
-- 
2.30.2

[PATCH v1 05/14] arm64: dts: imx8mq-librem5: add brightness levels to led-backlight

[Martin Kepplinger]

Add brightness-levels and default-brightness-level properties to
the librem5 board description that have been used for a long time.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 9f374da5c18aa..f8698b6995343 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -20,6 +20,8 @@ / {
 	backlight_dsi: backlight-dsi {
 		compatible = "led-backlight";
 		leds = <&led_backlight>;
+		brightness-levels = <255>;
+		default-brightness-level = <190>;
 	};
 
 	pmic_osc: clock-pmic {
-- 
2.30.2

[PATCH v1 06/14] arm64: dts: imx8mq-librem5: Set charger parameters for each batch

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

Correctly set regulation-voltage, termination-current and charge-current
for the different librem 5 board revisions.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts  | 10 ++++------
 arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi |  2 --
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi    |  4 +++-
 3 files changed, 7 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
index 73bd431cbd6a8..4f69eb32b1c90 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
@@ -12,18 +12,16 @@ / {
 	compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq";
 };
 
-&bq25895 {
-	ti,battery-regulation-voltage = <4192000>; /* uV */
-	ti,charge-current = <1600000>; /* uA */
-	ti,termination-current = <66000>;  /* uA */
-};
-
 &accel_gyro {
 	mount-matrix =  "1",  "0",  "0",
 			"0", "-1",  "0",
 			"0",  "0",  "1";
 };
 
+&bq25895 {
+	ti,charge-current = <1600000>; /* uA */
+};
+
 &proximity {
 	proximity-near-level = <120>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
index e4f8b47cce4f5..c1279e96effd7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
@@ -22,9 +22,7 @@ &accel_gyro {
 };
 
 &bq25895 {
-	ti,battery-regulation-voltage = <4200000>; /* uV */
 	ti,charge-current = <1500000>; /* uA */
-	ti,termination-current = <144000>;  /* uA */
 };
 
 &camera_front {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index f8698b6995343..509776a63259b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1147,7 +1147,9 @@ bq25895: charger@6a {
 		interrupt-parent = <&gpio3>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 		phys = <&usb3_phy0>;
-		ti,precharge-current = <130000>; /* uA */
+		ti,battery-regulation-voltage = <4208000>; /* uV */
+		ti,termination-current = <128000>;  /* uA */
+		ti,precharge-current = <128000>; /* uA */
 		ti,minimum-sys-voltage = <3700000>; /* uV */
 		ti,boost-voltage = <5000000>; /* uV */
 		ti,boost-max-current = <1500000>; /* uA */
-- 
2.30.2

[PATCH v1 07/14] arm64: dts: imx8mq-librem5: Set the DVS voltages lower

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

They're still in the operating range according to i.MX 8M Quad
datasheet. There's some headroom added over minimal values to
account for voltage drop.

Operational ranges (min - typ - max [selected]):
 - VDD_SOC (BUCK1): 0.81 - 0.9 - 0.99 [0.88]
 - VDD_ARM (BUCK2): 0.81 - 0.9 - 1.05 [0.84] (1000MHz)
                    0.90 - 1.0 - 1.05 [0.93] (1500MHz)
 - VDD_GPU (BUCK3): 0.81 - 0.9 - 1.05 [0.85] (800MHz)
                    0.90 - 1.0 - 1.05 [ -- ] (1000MHz)
 - VDD_VPU (BUCK4): 0.81 - 0.9 - 1.05 [ -- ] (550/500/588MHz)
                    0.90 - 1.0 - 1.05 [0.93] (660/600/800MHz)

Idle power consumption doesn't appear to be influenced much,
but a simple load test (`cat /dev/urandom | pigz - > /dev/null`
combined with running Animatch) seems to show about 0.3W of
difference.

Care is advised, as there may be differences between each
units in how low can they be undervolted - in my experience,
reaching that point usually makes the phone fail to boot.
In my case, it appears that my Birch phone can go down the most.

This is a somewhat conservative set of values that I've seen
working well on all my devices; I haven't tried very hard to
optimize it, so more experiments are welcome.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 .../boot/dts/freescale/imx8mq-librem5-r3.dts  |  2 +-
 .../boot/dts/freescale/imx8mq-librem5.dtsi    | 22 ++++++++++++++-----
 2 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
index 4533a84fb0b95..077c5cd2586f7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -7,7 +7,7 @@
 
 &a53_opp_table {
 	opp-1000000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <950000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 509776a63259b..eaf35cff2f8a6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -839,8 +839,8 @@ buck1_reg: BUCK1 {
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
 				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <900000>;
-				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-run-voltage = <880000>;
+				rohm,dvs-idle-voltage = <820000>;
 				rohm,dvs-suspend-voltage = <800000>;
 				regulator-always-on;
 			};
@@ -851,8 +851,8 @@ buck2_reg: BUCK2 {
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
 				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <1000000>;
-				rohm,dvs-idle-voltage = <900000>;
+				rohm,dvs-run-voltage = <950000>;
+				rohm,dvs-idle-voltage = <850000>;
 				regulator-always-on;
 			};
 
@@ -861,14 +861,14 @@ buck3_reg: BUCK3 {
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
-				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-run-voltage = <850000>;
 			};
 
 			buck4_reg: BUCK4 {
 				regulator-name = "buck4";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
-				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-run-voltage = <930000>;
 			};
 
 			buck5_reg: BUCK5 {
@@ -1403,3 +1403,13 @@ &wdog1 {
 	fsl,ext-reset-output;
 	status = "okay";
 };
+
+&a53_opp_table {
+	opp-1000000000 {
+		opp-microvolt = <850000>;
+	};
+
+	opp-1500000000 {
+		opp-microvolt = <950000>;
+	};
+};
-- 
2.30.2

[PATCH v1 08/14] arm64: dts: imx8mq-librem5: add the magnetometer mount matrix

[Martin Kepplinger]

From: Angus Ainslie <angus@akkea.ca>

Userland needs the mount matrix to know the correct orientation of
the part.

Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi | 6 ++++++
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi    | 2 +-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
index c1279e96effd7..db81ed699de75 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
@@ -38,6 +38,12 @@ MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4		0x83
 	};
 };
 
+&magnetometer {
+	mount-matrix =  "1",  "0",  "0",
+			"0", "-1",  "0",
+			"0",  "0", "-1";
+};
+
 &proximity {
 	proximity-near-level = <25>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index eaf35cff2f8a6..7e470135b86a4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -981,7 +981,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	magnetometer@1e	{
+	magnetometer: magnetometer@1e	{
 		compatible = "st,lsm9ds1-magn";
 		reg = <0x1e>;
 		pinctrl-names = "default";
-- 
2.30.2

[PATCH v1 09/14] arm64: dts: imx8mq-librem5: Bump usdhc2 frequency to 100MHz

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

RS9116 card already limits itself to 50MHz by being a high-speed card,
while AP6275S can work at 100MHz just fine (technically it should work
at 200MHz as well since it's a SDR104 card, but it doesn't appear to be
the case in practice and further research will be needed to find out why).

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 7e470135b86a4..0b4b49fa1392a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1389,7 +1389,7 @@ &usdhc2 {
 	mmc-pwrseq = <&usdhc2_pwrseq>;
 	post-power-on-delay-ms = <1000>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-	max-frequency = <50000000>;
+	max-frequency = <100000000>;
 	disable-wp;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-- 
2.30.2

[PATCH v1 10/14] arm64: dts: imx8mq-librem5: Adjust proximity sensor's near levels

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

Based on tests with my left ear (which appears to require lower levels
than the right one), one Birch, one Dogwood and three Evergreens.

It seems that the sensor reacts very weakly to hair, so let's make
the thresholds rather generous to compensate.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts  | 2 +-
 arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
index 4f69eb32b1c90..2b3d437a642a9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
@@ -23,5 +23,5 @@ &bq25895 {
 };
 
 &proximity {
-	proximity-near-level = <120>;
+	proximity-near-level = <50>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
index db81ed699de75..7fd0176e4bd30 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
@@ -45,5 +45,5 @@ &magnetometer {
 };
 
 &proximity {
-	proximity-near-level = <25>;
+	proximity-near-level = <10>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
index 1056b7981bdbd..97577c0a77158 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
@@ -23,5 +23,5 @@ &lcd_panel {
 };
 
 &proximity {
-	proximity-near-level = <10>;
+	proximity-near-level = <5>;
 };
-- 
2.30.2

[PATCH v1 11/14] arm64: dts: imx8mq-librem5: Remove dis_u3_susphy_quirk from usb_dwc3_0

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

This reduces power consumption in system suspend by about 10%.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 0b4b49fa1392a..f557632f574fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1322,7 +1322,6 @@ &usb_dwc3_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	dr_mode = "otg";
-	snps,dis_u3_susphy_quirk;
 	usb-role-switch;
 	status = "okay";
 
-- 
2.30.2

[PATCH v1 12/14] arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage to 0.81V

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

0.8V is outside of the operating voltage specified for imx8mq, see
chapter 3.1.4 "Operating ranges" of the IMX8MDQLQCEC document.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index f557632f574fa..7e70663cffa30 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -841,7 +841,7 @@ buck1_reg: BUCK1 {
 				regulator-ramp-delay = <1250>;
 				rohm,dvs-run-voltage = <880000>;
 				rohm,dvs-idle-voltage = <820000>;
-				rohm,dvs-suspend-voltage = <800000>;
+				rohm,dvs-suspend-voltage = <810000>;
 				regulator-always-on;
 			};
 
-- 
2.30.2

[PATCH v1 13/14] arm64: dts: imx8mq-librem5: Reduce I2C frequency to 384kHz

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

According to imx8mq errata (ERR007805):

> To meet the clock low period requirement in fast speed mode,
> SCL must be configured to 384KHz or less.

Note that the imx i2c driver already implements this erratum and works
around it. This is only for the description to reflect reality.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 7e70663cffa30..35bde8d41e8e7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -778,7 +778,7 @@ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x1f
 };
 
 &i2c1 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -976,7 +976,7 @@ rtc@68 {
 };
 
 &i2c2 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
@@ -1025,7 +1025,7 @@ accel_gyro: accel-gyro@6a	{
 };
 
 &i2c3 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
@@ -1115,7 +1115,7 @@ touchscreen@38 {
 };
 
 &i2c4 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
-- 
2.30.2

[PATCH v1 14/14] arm64: dts: imx8mq-librem5: Add 166MHz to DDRC OPP table

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

This is the lowest frequency supported by older iMX8MQ SoC
revisions.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 35bde8d41e8e7..ceced6bc4e898 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -329,6 +329,10 @@ opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
+		opp-166000000 {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
-- 
2.30.2

Re: [PATCH v1 11/14] arm64: dts: imx8mq-librem5: Remove dis_u3_susphy_quirk from usb_dwc3_0

[Shawn Guo]

On Thu, Mar 09, 2023 at 09:46:05PM +0100, Martin Kepplinger wrote:
> From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
> 
> This reduces power consumption in system suspend by about 10%.

Is there any other impact than this nice power gain?  Otherwise,
I would wonder why the quirk was enabled in the first place.

Shawn

> 
> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> index 0b4b49fa1392a..f557632f574fa 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> @@ -1322,7 +1322,6 @@ &usb_dwc3_0 {
>  	#address-cells = <1>;
>  	#size-cells = <0>;
>  	dr_mode = "otg";
> -	snps,dis_u3_susphy_quirk;
>  	usb-role-switch;
>  	status = "okay";
>  
> -- 
> 2.30.2
> 

Re: [PATCH v1 11/14] arm64: dts: imx8mq-librem5: Remove dis_u3_susphy_quirk from usb_dwc3_0

[Angus Ainslie]

Hi Shawn,

On 2023-03-14 00:28, Shawn Guo wrote:
> On Thu, Mar 09, 2023 at 09:46:05PM +0100, Martin Kepplinger wrote:
>> From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
>> 
>> This reduces power consumption in system suspend by about 10%.
> 
> Is there any other impact than this nice power gain?  Otherwise,
> I would wonder why the quirk was enabled in the first place.
> 

This comes from the early days of board bring-up and IIRC it seemed to 
stabilize flashing using the mfgtools over USB. Whatever gremlin was in 
those early boards is long gone and this is no longer needed.

Cheers
Angus

> Shawn
> 
>> 
>> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
>> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
>> ---
>>  arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 1 -
>>  1 file changed, 1 deletion(-)
>> 
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi 
>> b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
>> index 0b4b49fa1392a..f557632f574fa 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
>> @@ -1322,7 +1322,6 @@ &usb_dwc3_0 {
>>  	#address-cells = <1>;
>>  	#size-cells = <0>;
>>  	dr_mode = "otg";
>> -	snps,dis_u3_susphy_quirk;
>>  	usb-role-switch;
>>  	status = "okay";
>> 
>> --
>> 2.30.2
>> 

Re: [PATCH v1 00/14] arm64: dts: imx8mq-librem5: updates and fixes until march 2023

[Shawn Guo]

On Thu, Mar 09, 2023 at 09:45:54PM +0100, Martin Kepplinger wrote:
> hi Shawn and all interested in the Librem 5 phone,
> 
> This is another round of updates to the phone DT description. Some are
> clear fixes, but some are important updates like the CSI changes
> that make the selfie cam work or the powersaving related things like
> the ddrc opp table entry and voltage changes.
> 
> As previously this is all mixed together because the changes are small.
> If you prefer separate, small "topic-patchsets", please say so.
> 
> thanks,
>                            martin
> 
> 
> Angus Ainslie (1):
>   arm64: dts: imx8mq-librem5: add the magnetometer mount matrix
> 
> Martin Kepplinger (4):
>   arm64: dts: imx8mq-librem5: lower the mipi csi 1 frequencies
>   arm64: dts: imx8mq-librem5: describe the clock for the csi sensors
>   arm64: dts: imx8mq-librem5: fix audio-1v8 regulator name
>   arm64: dts: imx8mq-librem5: add brightness levels to led-backlight
> 
> Sebastian Krzyszkowiak (9):
>   arm64: dts: imx8mq-librem5: Describe MIC_2V4 regulator
>   arm64: dts: imx8mq-librem5: Set charger parameters for each batch
>   arm64: dts: imx8mq-librem5: Set the DVS voltages lower
>   arm64: dts: imx8mq-librem5: Bump usdhc2 frequency to 100MHz
>   arm64: dts: imx8mq-librem5: Adjust proximity sensor's near levels
>   arm64: dts: imx8mq-librem5: Remove dis_u3_susphy_quirk from usb_dwc3_0
>   arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage to 0.81V
>   arm64: dts: imx8mq-librem5: Reduce I2C frequency to 384kHz
>   arm64: dts: imx8mq-librem5: Add 166MHz to DDRC OPP table

Applied all, thanks!