* [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes
@ 2021-04-08 16:21 Caleb Connolly
2021-04-14 8:14 ` Felipe Balbi
0 siblings, 1 reply; 3+ messages in thread
From: Caleb Connolly @ 2021-04-08 16:21 UTC (permalink / raw)
To: caleb, Andy Gross, Bjorn Andersson, Rob Herring
Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm,
Vinod Koul, Bhupesh Sharma, devicetree, linux-kernel
Tested on the OnePlus 7 Pro (including DMA).
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 521 +++++++++++++++++++++++++++
1 file changed, 521 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 543417d74216..7207a3689d9d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -588,6 +588,111 @@ qupv3_id_0: geniqup@8c0000 {
#size-cells = <2>;
ranges;
status = "disabled";
+
+ i2c0: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00898000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@89c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0089c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c7_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
};
qupv3_id_1: geniqup@ac0000 {
@@ -602,6 +707,58 @@ qupv3_id_1: geniqup@ac0000 {
ranges;
status = "disabled";
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c9_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c11_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart2: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
@@ -610,6 +767,32 @@ uart2: serial@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c12_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c16: i2c@94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0094000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c16_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
qupv3_id_2: geniqup@cc0000 {
@@ -624,6 +807,84 @@ qupv3_id_2: geniqup@cc0000 {
#size-cells = <2>;
ranges;
status = "disabled";
+
+ i2c17: i2c@c80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c17_default>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c18: i2c@c84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c18_default>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c19: i2c@c88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c19_default>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c13: i2c@c8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c13_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c14: i2c@c90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c14_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@c94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c15_default>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
config_noc: interconnect@1500000 {
@@ -947,6 +1208,266 @@ tlmm: pinctrl@3100000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ qup_i2c0_default: qup-i2c0-default {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "qup0";
+ };
+
+ config {
+ pins = "gpio0", "gpio1";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c1_default: qup-i2c1-default {
+ mux {
+ pins = "gpio114", "gpio115";
+ function = "qup1";
+ };
+
+ config {
+ pins = "gpio114", "gpio115";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c2_default: qup-i2c2-default {
+ mux {
+ pins = "gpio126", "gpio127";
+ function = "qup2";
+ };
+
+ config {
+ pins = "gpio126", "gpio127";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c3_default: qup-i2c3-default {
+ mux {
+ pins = "gpio144", "gpio145";
+ function = "qup3";
+ };
+
+ config {
+ pins = "gpio144", "gpio145";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c4_default: qup-i2c4-default {
+ mux {
+ pins = "gpio51", "gpio52";
+ function = "qup4";
+ };
+
+ config {
+ pins = "gpio51", "gpio52";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c5_default: qup-i2c5-default {
+ mux {
+ pins = "gpio121", "gpio122";
+ function = "qup5";
+ };
+
+ config {
+ pins = "gpio121", "gpio122";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c6_default: qup-i2c6-default {
+ mux {
+ pins = "gpio6", "gpio7";
+ function = "qup6";
+ };
+
+ config {
+ pins = "gpio6", "gpio7";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c7_default: qup-i2c7-default {
+ mux {
+ pins = "gpio98", "gpio99";
+ function = "qup7";
+ };
+
+ config {
+ pins = "gpio98", "gpio99";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c8_default: qup-i2c8-default {
+ mux {
+ pins = "gpio88", "gpio89";
+ function = "qup8";
+ };
+
+ config {
+ pins = "gpio88", "gpio89";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c9_default: qup-i2c9-default {
+ mux {
+ pins = "gpio39", "gpio40";
+ function = "qup9";
+ };
+
+ config {
+ pins = "gpio39", "gpio40";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c10_default: qup-i2c10-default {
+ mux {
+ pins = "gpio9", "gpio10";
+ function = "qup10";
+ };
+
+ config {
+ pins = "gpio9", "gpio10";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c11_default: qup-i2c11-default {
+ mux {
+ pins = "gpio94", "gpio95";
+ function = "qup11";
+ };
+
+ config {
+ pins = "gpio94", "gpio95";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c12_default: qup-i2c12-default {
+ mux {
+ pins = "gpio83", "gpio84";
+ function = "qup12";
+ };
+
+ config {
+ pins = "gpio83", "gpio84";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c13_default: qup-i2c13-default {
+ mux {
+ pins = "gpio43", "gpio44";
+ function = "qup13";
+ };
+
+ config {
+ pins = "gpio43", "gpio44";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c14_default: qup-i2c14-default {
+ mux {
+ pins = "gpio47", "gpio48";
+ function = "qup14";
+ };
+
+ config {
+ pins = "gpio47", "gpio48";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c15_default: qup-i2c15-default {
+ mux {
+ pins = "gpio27", "gpio28";
+ function = "qup15";
+ };
+
+ config {
+ pins = "gpio27", "gpio28";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c16_default: qup-i2c16-default {
+ mux {
+ pins = "gpio86", "gpio85";
+ function = "qup16";
+ };
+
+ config {
+ pins = "gpio86", "gpio85";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c17_default: qup-i2c17-default {
+ mux {
+ pins = "gpio55", "gpio56";
+ function = "qup17";
+ };
+
+ config {
+ pins = "gpio55", "gpio56";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c18_default: qup-i2c18-default {
+ mux {
+ pins = "gpio23", "gpio24";
+ function = "qup18";
+ };
+
+ config {
+ pins = "gpio23", "gpio24";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c19_default: qup-i2c19-default {
+ mux {
+ pins = "gpio57", "gpio58";
+ function = "qup19";
+ };
+
+ config {
+ pins = "gpio57", "gpio58";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
};
remoteproc_mpss: remoteproc@4080000 {
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes
2021-04-08 16:21 [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly
@ 2021-04-14 8:14 ` Felipe Balbi
0 siblings, 0 replies; 3+ messages in thread
From: Felipe Balbi @ 2021-04-14 8:14 UTC (permalink / raw)
To: Caleb Connolly, caleb, Andy Gross, Bjorn Andersson, Rob Herring
Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm,
Vinod Koul, Bhupesh Sharma, devicetree, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 384 bytes --]
Caleb Connolly <caleb@connolly.tech> writes:
> Tested on the OnePlus 7 Pro (including DMA).
>
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> Reviewed-by: Vinod Koul <vkoul@kernel.org>
> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Tested on Microsoft Surface Duo (DTS will be sent after -rc1)
Tested-by: Felipe Balbi <balbi@kernel.org>
--
balbi
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 857 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* (No Subject)
@ 2021-03-21 17:46 Caleb Connolly
2021-03-21 17:46 ` [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly
0 siblings, 1 reply; 3+ messages in thread
From: Caleb Connolly @ 2021-03-21 17:46 UTC (permalink / raw)
To: caleb; +Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm
Subject: v2: arm64: dts: sm8150: start populating qups
The QUPs are rather sparse, lets add the zero-th and second qup nodes,
the iommus properties for all of them and the i2c nodes.
With this it's now possible to bringup the touchscreen on my
device, and without crashing!
Derived from OnePlus 7 Pro downstream kernel sources.
Caleb
---
Of note, I'm only able to properly test i2c17, as that's what my
touchscreen is attached to. Enabling i2c18 causes my device to lockup
during probe, I suspect those pins are used for some other purpose on my
device.
Changes since v1:
* Pick up Reviewed-By's from Vinod and Bhupesh
* Squash second patch into first
* Add iommus property to dt-binding docs for geni
* Fix i2c19 being mistakenly enabled by default
Caleb Connolly (3):
arm64: dts: qcom: sm8150: add other QUP nodes and iommus
arm64: dts: qcom: sm8150: add i2c nodes
dt-bindings: qcom: geni-se: document iommus
arch/arm64/boot/dts/qcom/sm8150.dtsi | 549 +++++++++++++++++++++++++++++++++++
1 file changed, 549 insertions(+)
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes
2021-03-21 17:46 (No Subject) Caleb Connolly
@ 2021-03-21 17:46 ` Caleb Connolly
0 siblings, 0 replies; 3+ messages in thread
From: Caleb Connolly @ 2021-03-21 17:46 UTC (permalink / raw)
To: caleb, Andy Gross, Bjorn Andersson, Rob Herring
Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm,
Vinod Koul, Bhupesh Sharma, devicetree, linux-kernel
Tested on the OnePlus 7 Pro (including DMA).
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 521 +++++++++++++++++++++++++++
1 file changed, 521 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 543417d74216..7207a3689d9d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -588,6 +588,111 @@ qupv3_id_0: geniqup@8c0000 {
#size-cells = <2>;
ranges;
status = "disabled";
+
+ i2c0: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00898000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@89c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0089c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c7_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
};
qupv3_id_1: geniqup@ac0000 {
@@ -602,6 +707,58 @@ qupv3_id_1: geniqup@ac0000 {
ranges;
status = "disabled";
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c9_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c11_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart2: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
@@ -610,6 +767,32 @@ uart2: serial@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c12_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c16: i2c@94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0094000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c16_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
qupv3_id_2: geniqup@cc0000 {
@@ -624,6 +807,84 @@ qupv3_id_2: geniqup@cc0000 {
#size-cells = <2>;
ranges;
status = "disabled";
+
+ i2c17: i2c@c80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c17_default>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c18: i2c@c84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c18_default>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c19: i2c@c88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c19_default>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c13: i2c@c8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c13_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c14: i2c@c90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c14_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@c94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00c94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c15_default>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
config_noc: interconnect@1500000 {
@@ -947,6 +1208,266 @@ tlmm: pinctrl@3100000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ qup_i2c0_default: qup-i2c0-default {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "qup0";
+ };
+
+ config {
+ pins = "gpio0", "gpio1";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c1_default: qup-i2c1-default {
+ mux {
+ pins = "gpio114", "gpio115";
+ function = "qup1";
+ };
+
+ config {
+ pins = "gpio114", "gpio115";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c2_default: qup-i2c2-default {
+ mux {
+ pins = "gpio126", "gpio127";
+ function = "qup2";
+ };
+
+ config {
+ pins = "gpio126", "gpio127";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c3_default: qup-i2c3-default {
+ mux {
+ pins = "gpio144", "gpio145";
+ function = "qup3";
+ };
+
+ config {
+ pins = "gpio144", "gpio145";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c4_default: qup-i2c4-default {
+ mux {
+ pins = "gpio51", "gpio52";
+ function = "qup4";
+ };
+
+ config {
+ pins = "gpio51", "gpio52";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c5_default: qup-i2c5-default {
+ mux {
+ pins = "gpio121", "gpio122";
+ function = "qup5";
+ };
+
+ config {
+ pins = "gpio121", "gpio122";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c6_default: qup-i2c6-default {
+ mux {
+ pins = "gpio6", "gpio7";
+ function = "qup6";
+ };
+
+ config {
+ pins = "gpio6", "gpio7";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c7_default: qup-i2c7-default {
+ mux {
+ pins = "gpio98", "gpio99";
+ function = "qup7";
+ };
+
+ config {
+ pins = "gpio98", "gpio99";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c8_default: qup-i2c8-default {
+ mux {
+ pins = "gpio88", "gpio89";
+ function = "qup8";
+ };
+
+ config {
+ pins = "gpio88", "gpio89";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c9_default: qup-i2c9-default {
+ mux {
+ pins = "gpio39", "gpio40";
+ function = "qup9";
+ };
+
+ config {
+ pins = "gpio39", "gpio40";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c10_default: qup-i2c10-default {
+ mux {
+ pins = "gpio9", "gpio10";
+ function = "qup10";
+ };
+
+ config {
+ pins = "gpio9", "gpio10";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c11_default: qup-i2c11-default {
+ mux {
+ pins = "gpio94", "gpio95";
+ function = "qup11";
+ };
+
+ config {
+ pins = "gpio94", "gpio95";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c12_default: qup-i2c12-default {
+ mux {
+ pins = "gpio83", "gpio84";
+ function = "qup12";
+ };
+
+ config {
+ pins = "gpio83", "gpio84";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c13_default: qup-i2c13-default {
+ mux {
+ pins = "gpio43", "gpio44";
+ function = "qup13";
+ };
+
+ config {
+ pins = "gpio43", "gpio44";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c14_default: qup-i2c14-default {
+ mux {
+ pins = "gpio47", "gpio48";
+ function = "qup14";
+ };
+
+ config {
+ pins = "gpio47", "gpio48";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c15_default: qup-i2c15-default {
+ mux {
+ pins = "gpio27", "gpio28";
+ function = "qup15";
+ };
+
+ config {
+ pins = "gpio27", "gpio28";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c16_default: qup-i2c16-default {
+ mux {
+ pins = "gpio86", "gpio85";
+ function = "qup16";
+ };
+
+ config {
+ pins = "gpio86", "gpio85";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c17_default: qup-i2c17-default {
+ mux {
+ pins = "gpio55", "gpio56";
+ function = "qup17";
+ };
+
+ config {
+ pins = "gpio55", "gpio56";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c18_default: qup-i2c18-default {
+ mux {
+ pins = "gpio23", "gpio24";
+ function = "qup18";
+ };
+
+ config {
+ pins = "gpio23", "gpio24";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c19_default: qup-i2c19-default {
+ mux {
+ pins = "gpio57", "gpio58";
+ function = "qup19";
+ };
+
+ config {
+ pins = "gpio57", "gpio58";
+ drive-strength = <0x02>;
+ bias-disable;
+ };
+ };
};
remoteproc_mpss: remoteproc@4080000 {
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-04-14 8:14 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-08 16:21 [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly
2021-04-14 8:14 ` Felipe Balbi
-- strict thread matches above, loose matches on Subject: below --
2021-03-21 17:46 (No Subject) Caleb Connolly
2021-03-21 17:46 ` [PATCH v2 2/3] arm64: dts: qcom: sm8150: add i2c nodes Caleb Connolly
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).