From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: Hans de Goede <hdegoede@redhat.com>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
rui.zhang@intel.com, hpa@redhat.com, mgross@linux.intel.com,
alex.hung@canonical.com, sujith.thomas@intel.com,
andriy.shevchenko@linux.intel.com
Cc: linux-pm@vger.kernel.org, platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH] thermal/drivers/intel: Move intel_menlow to thermal drivers
Date: Mon, 16 Aug 2021 10:05:13 +0200 [thread overview]
Message-ID: <144b2a35-bd24-2a88-c538-5c7c4a6c4fd1@linaro.org> (raw)
In-Reply-To: <4d1c20ab-6c81-8e9f-6d0f-180ecaa92812@redhat.com>
Hi Hans,
On 16/08/2021 09:55, Hans de Goede wrote:
> Hi,
>
> On 8/16/21 5:53 AM, Srinivas Pandruvada wrote:
>> Moved drivers/platform/x86/intel_menlow.c to drivers/thermal/intel.
>>
>> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
>
> Thank you.
>
> Rui, with this upcoming patch-series:
>
> https://lore.kernel.org/platform-driver-x86/c6a90704-5080-d479-0022-58e5d106c026@infradead.org/T/#t
>
> drivers/platform/x86/Kconfig + Makefile
>
> Are going to see quite a bit of churn, is it ok if I merge this patch
> through the pdx86 tree to avoid conflicts with all those changes?
>
> Rui, if this is ok, may I have your ack for this then ?
As co-maintainer:
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>> ---
>> MAINTAINERS | 4 ++--
>> drivers/platform/x86/Kconfig | 10 ----------
>> drivers/platform/x86/Makefile | 1 -
>> drivers/thermal/intel/Kconfig | 9 +++++++++
>> drivers/thermal/intel/Makefile | 1 +
>> drivers/{platform/x86 => thermal/intel}/intel_menlow.c | 0
>> 6 files changed, 12 insertions(+), 13 deletions(-)
>> rename drivers/{platform/x86 => thermal/intel}/intel_menlow.c (100%)
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index fd25e4ecf0b9..4231aea31a6f 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -9459,10 +9459,10 @@ F: include/linux/mfd/intel-m10-bmc.h
>>
>> INTEL MENLOW THERMAL DRIVER
>> M: Sujith Thomas <sujith.thomas@intel.com>
>> -L: platform-driver-x86@vger.kernel.org
>> +L: linux-pm@vger.kernel.org
>> S: Supported
>> W: https://01.org/linux-acpi
>> -F: drivers/platform/x86/intel_menlow.c
>> +F: drivers/thermal/intel/intel_menlow.c
>>
>> INTEL P-Unit IPC DRIVER
>> M: Zha Qipeng <qipeng.zha@intel.com>
>> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
>> index d12db6c316ea..da312426b4a5 100644
>> --- a/drivers/platform/x86/Kconfig
>> +++ b/drivers/platform/x86/Kconfig
>> @@ -720,16 +720,6 @@ config INTEL_INT0002_VGPIO
>> To compile this driver as a module, choose M here: the module will
>> be called intel_int0002_vgpio.
>>
>> -config INTEL_MENLOW
>> - tristate "Thermal Management driver for Intel menlow platform"
>> - depends on ACPI_THERMAL
>> - select THERMAL
>> - help
>> - ACPI thermal management enhancement driver on
>> - Intel Menlow platform.
>> -
>> - If unsure, say N.
>> -
>> config INTEL_OAKTRAIL
>> tristate "Intel Oaktrail Platform Extras"
>> depends on ACPI
>> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
>> index 7ee369aab10d..0d3af23f1186 100644
>> --- a/drivers/platform/x86/Makefile
>> +++ b/drivers/platform/x86/Makefile
>> @@ -72,7 +72,6 @@ obj-$(CONFIG_INTEL_ATOMISP2_LED) += intel_atomisp2_led.o
>> obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o
>> obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o
>> obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o
>> -obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
>> obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o
>> obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o
>>
>> diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig
>> index e4299ca3423c..c83ea5d04a1d 100644
>> --- a/drivers/thermal/intel/Kconfig
>> +++ b/drivers/thermal/intel/Kconfig
>> @@ -90,3 +90,12 @@ config INTEL_TCC_COOLING
>> Note that, on different platforms, the behavior might be different
>> on how fast the setting takes effect, and how much the CPU frequency
>> is reduced.
>> +
>> +config INTEL_MENLOW
>> + tristate "Thermal Management driver for Intel menlow platform"
>> + depends on ACPI_THERMAL
>> + help
>> + ACPI thermal management enhancement driver on
>> + Intel Menlow platform.
>> +
>> + If unsure, say N.
>> diff --git a/drivers/thermal/intel/Makefile b/drivers/thermal/intel/Makefile
>> index 5ff2afa388f7..960b56268b4a 100644
>> --- a/drivers/thermal/intel/Makefile
>> +++ b/drivers/thermal/intel/Makefile
>> @@ -12,3 +12,4 @@ obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
>> obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
>> obj-$(CONFIG_INTEL_TCC_COOLING) += intel_tcc_cooling.o
>> obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
>> +obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
>> diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/thermal/intel/intel_menlow.c
>> similarity index 100%
>> rename from drivers/platform/x86/intel_menlow.c
>> rename to drivers/thermal/intel/intel_menlow.c
>>
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
next prev parent reply other threads:[~2021-08-16 8:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-16 3:53 [PATCH] thermal/drivers/intel: Move intel_menlow to thermal drivers Srinivas Pandruvada
2021-08-16 7:55 ` Hans de Goede
2021-08-16 8:05 ` Daniel Lezcano [this message]
2021-08-16 9:42 ` Zhang Rui
2021-08-16 9:41 ` Zhang Rui
2021-08-17 12:20 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=144b2a35-bd24-2a88-c538-5c7c4a6c4fd1@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=alex.hung@canonical.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=hdegoede@redhat.com \
--cc=hpa@redhat.com \
--cc=linux-pm@vger.kernel.org \
--cc=mgross@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rui.zhang@intel.com \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=sujith.thomas@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).