platform-driver-x86.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Luke D. Jones" <luke@ljones.dev>
To: linux-kernel@vger.kernel.org
Cc: hdegoede@redhat.com, hadess@hadess.net,
	platform-driver-x86@vger.kernel.org,
	"Luke D. Jones" <luke@ljones.dev>
Subject: [PATCH v4 1/1] asus-wmi: Add support for platform_profile
Date: Mon, 16 Aug 2021 11:05:58 +1200	[thread overview]
Message-ID: <20210815230558.5860-2-luke@ljones.dev> (raw)
In-Reply-To: <20210815230558.5860-1-luke@ljones.dev>

Add initial support for platform_profile where the support is
based on availability of ASUS_THROTTLE_THERMAL_POLICY.

Because throttle_thermal_policy is used by platform_profile and is
writeable separately to platform_profile any userspace changes to
throttle_thermal_policy need to notify platform_profile.

In future throttle_thermal_policy sysfs should be removed so that
only one method controls the laptop power profile.

Signed-off-by: Luke D. Jones <luke@ljones.dev>
---
 drivers/platform/x86/Kconfig    |   1 +
 drivers/platform/x86/asus-wmi.c | 138 +++++++++++++++++++++++++++++++-
 2 files changed, 135 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index d12db6c316ea..46dec48a36c1 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -281,6 +281,7 @@ config ASUS_WMI
 	select INPUT_SPARSEKMAP
 	select LEDS_CLASS
 	select NEW_LEDS
+	select ACPI_PLATFORM_PROFILE
 	help
 	  Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new
 	  Asus Notebooks).
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 90a6a0d00deb..c11ce06073d1 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -11,6 +11,7 @@
  * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru>
  */
 
+#include <asm-generic/errno.h>
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
@@ -26,6 +27,7 @@
 #include <linux/rfkill.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
+#include <linux/platform_profile.h>
 #include <linux/power_supply.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
@@ -219,6 +221,9 @@ struct asus_wmi {
 	bool throttle_thermal_policy_available;
 	u8 throttle_thermal_policy_mode;
 
+	struct platform_profile_handler platform_profile_handler;
+	bool platform_profile_support;
+
 	// The RSOC controls the maximum charging percentage.
 	bool battery_rsoc_available;
 
@@ -2103,12 +2108,23 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus)
 static int throttle_thermal_policy_switch_next(struct asus_wmi *asus)
 {
 	u8 new_mode = asus->throttle_thermal_policy_mode + 1;
+	int err;
 
 	if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
 		new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
 
 	asus->throttle_thermal_policy_mode = new_mode;
-	return throttle_thermal_policy_write(asus);
+	err = throttle_thermal_policy_write(asus);
+	if (err)
+		return err;
+
+	/*
+	 * Ensure that platform_profile updates userspace with the change to ensure
+	 * that platform_profile and throttle_thermal_policy_mode are in sync.
+	 */
+	platform_profile_notify();
+
+	return 0;
 }
 
 static ssize_t throttle_thermal_policy_show(struct device *dev,
@@ -2124,9 +2140,10 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,
 				    struct device_attribute *attr,
 				    const char *buf, size_t count)
 {
-	int result;
-	u8 new_mode;
 	struct asus_wmi *asus = dev_get_drvdata(dev);
+	u8 new_mode;
+	int result;
+	int err;
 
 	result = kstrtou8(buf, 10, &new_mode);
 	if (result < 0)
@@ -2136,7 +2153,15 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,
 		return -EINVAL;
 
 	asus->throttle_thermal_policy_mode = new_mode;
-	throttle_thermal_policy_write(asus);
+	err = throttle_thermal_policy_write(asus);
+	if (err)
+		return err;
+
+	/*
+	 * Ensure that platform_profile updates userspace with the change to ensure
+	 * that platform_profile and throttle_thermal_policy_mode are in sync.
+	 */
+	platform_profile_notify();
 
 	return count;
 }
@@ -2144,6 +2169,101 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,
 // Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent
 static DEVICE_ATTR_RW(throttle_thermal_policy);
 
+/* Platform profile ***********************************************************/
+static int platform_profile_get(struct platform_profile_handler *pprof,
+				enum platform_profile_option *profile)
+{
+	struct asus_wmi *asus;
+	int tp;
+
+	asus = container_of(pprof, struct asus_wmi, platform_profile_handler);
+
+	if (!asus->throttle_thermal_policy_available) {
+		return -ENODATA;
+	}
+	tp = asus->throttle_thermal_policy_mode;
+
+	if (tp < 0)
+		return tp;
+
+	switch (tp) {
+	case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT:
+		*profile = PLATFORM_PROFILE_BALANCED;
+		break;
+	case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST:
+		*profile = PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	case ASUS_THROTTLE_THERMAL_POLICY_SILENT:
+		*profile = PLATFORM_PROFILE_QUIET;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int platform_profile_set(struct platform_profile_handler *pprof,
+				enum platform_profile_option profile)
+{
+	struct asus_wmi *asus;
+	int tp;
+
+	asus = container_of(pprof, struct asus_wmi, platform_profile_handler);
+
+	/* All possible toggles like throttle_thermal_policy here */
+	if (!asus->throttle_thermal_policy_available) {
+		return -ENODATA;
+	}
+
+	switch (profile) {
+	case PLATFORM_PROFILE_PERFORMANCE:
+		tp = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		tp = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
+		break;
+	case PLATFORM_PROFILE_QUIET:
+		tp = ASUS_THROTTLE_THERMAL_POLICY_SILENT;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	asus->throttle_thermal_policy_mode = tp;
+	return throttle_thermal_policy_write(asus);
+}
+
+static int platform_profile_setup(struct asus_wmi *asus)
+{
+	int err;
+
+	if (!asus->throttle_thermal_policy_available) {
+		/*
+		 * Not an error if a component platform_profile relies on is unavailable
+		 * so early return, skipping the setup of platform_profile.
+		*/
+		return 0;
+	}
+	dev_info("Using throttle_thermal_policy for platform_profile support\n");
+
+	asus->platform_profile_handler.profile_get = platform_profile_get;
+	asus->platform_profile_handler.profile_set = platform_profile_set;
+
+	set_bit(PLATFORM_PROFILE_QUIET, asus->platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED,
+		asus->platform_profile_handler.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE,
+		asus->platform_profile_handler.choices);
+
+	err = platform_profile_register(&asus->platform_profile_handler);
+	if (err)
+		return err;
+
+	asus->platform_profile_support = true;
+	return 0;
+}
+
 /* Backlight ******************************************************************/
 
 static int read_backlight_power(struct asus_wmi *asus)
@@ -2904,6 +3024,10 @@ static int asus_wmi_add(struct platform_device *pdev)
 	else
 		throttle_thermal_policy_set_default(asus);
 
+	err = platform_profile_setup(asus);
+	if (err)
+		goto fail_platform_profile_setup;
+
 	err = panel_od_check_present(asus);
 	if (err)
 		goto fail_panel_od;
@@ -2993,6 +3117,9 @@ static int asus_wmi_add(struct platform_device *pdev)
 	asus_wmi_sysfs_exit(asus->platform_device);
 fail_sysfs:
 fail_throttle_thermal_policy:
+fail_platform_profile_setup:
+	if (asus->platform_profile_support)
+		platform_profile_remove();
 fail_fan_boost_mode:
 fail_egpu_enable:
 fail_dgpu_disable:
@@ -3017,6 +3144,9 @@ static int asus_wmi_remove(struct platform_device *device)
 	asus_fan_set_auto(asus);
 	asus_wmi_battery_exit(asus);
 
+	if (asus->platform_profile_support)
+		platform_profile_remove();
+
 	kfree(asus);
 	return 0;
 }
-- 
2.31.1


  reply	other threads:[~2021-08-15 23:06 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-15 23:05 [PATCH v4 0/1] asus-wmi: add platform_profile support Luke D. Jones
2021-08-15 23:05 ` Luke D. Jones [this message]
2021-08-16  8:32   ` [PATCH v4 1/1] asus-wmi: Add support for platform_profile Hans de Goede
2021-08-18 13:01     ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210815230558.5860-2-luke@ljones.dev \
    --to=luke@ljones.dev \
    --cc=hadess@hadess.net \
    --cc=hdegoede@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).