platform-driver-x86.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Hans de Goede <hdegoede@redhat.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Kate Hsuan <hpa@redhat.com>,
	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
	linux-kernel@vger.kernel.org,
	platform-driver-x86@vger.kernel.org, Dell.Client.Kernel@dell.com
Cc: Mark Gross <mgross@linux.intel.com>,
	Alex Hung <alex.hung@canonical.com>,
	Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>,
	David E Box <david.e.box@intel.com>,
	Zha Qipeng <qipeng.zha@intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	"David E. Box" <david.e.box@linux.intel.com>,
	AceLan Kao <acelan.kao@canonical.com>,
	Jithu Joseph <jithu.joseph@intel.com>,
	Maurice Ma <maurice.ma@intel.com>
Subject: [PATCH v4 14/21] platform/x86: intel_atomisp2: Move to intel sub-directory
Date: Thu, 19 Aug 2021 19:37:28 +0300	[thread overview]
Message-ID: <20210819163735.81803-15-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20210819163735.81803-1-andriy.shevchenko@linux.intel.com>

From: Kate Hsuan <hpa@redhat.com>

Move Intel AtomISP v2 drivers to intel sub-directory
to improve readability.

Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 MAINTAINERS                                   |  4 +-
 drivers/platform/x86/Kconfig                  | 34 ---------------
 drivers/platform/x86/Makefile                 |  2 -
 drivers/platform/x86/intel/Kconfig            |  1 +
 drivers/platform/x86/intel/Makefile           |  1 +
 drivers/platform/x86/intel/atomisp2/Kconfig   | 43 +++++++++++++++++++
 drivers/platform/x86/intel/atomisp2/Makefile  |  9 ++++
 .../atomisp2/led.c}                           |  0
 .../atomisp2/pm.c}                            |  0
 9 files changed, 56 insertions(+), 38 deletions(-)
 create mode 100644 drivers/platform/x86/intel/atomisp2/Kconfig
 create mode 100644 drivers/platform/x86/intel/atomisp2/Makefile
 rename drivers/platform/x86/{intel_atomisp2_led.c => intel/atomisp2/led.c} (100%)
 rename drivers/platform/x86/{intel_atomisp2_pm.c => intel/atomisp2/pm.c} (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index bb8e848a0f83..ce79ad253afe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9212,13 +9212,13 @@ INTEL ATOMISP2 DUMMY / POWER-MANAGEMENT DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/platform/x86/intel_atomisp2_pm.c
+F:	drivers/platform/x86/intel/atomisp2/pm.c
 
 INTEL ATOMISP2 LED DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/platform/x86/intel_atomisp2_led.c
+F:	drivers/platform/x86/intel/atomisp2/led.c
 
 INTEL BIOS SAR INT1092 DRIVER
 M:	Shravan S <s.shravan@intel.com>
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 2c80597cfa4d..feca8ae551a1 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -668,40 +668,6 @@ config THINKPAD_LMI
 
 source "drivers/platform/x86/intel/Kconfig"
 
-config INTEL_ATOMISP2_LED
-	tristate "Intel AtomISP2 camera LED driver"
-	depends on GPIOLIB && LEDS_GPIO
-	help
-	  Many Bay Trail and Cherry Trail devices come with a camera attached
-	  to Intel's Image Signal Processor. Linux currently does not have a
-	  driver for these, so they do not work as a camera. Some of these
-	  camera's have a LED which is controlled through a GPIO.
-
-	  Some of these devices have a firmware issue where the LED gets turned
-	  on at boot. This driver will turn the LED off at boot and also allows
-	  controlling the LED (repurposing it) through the sysfs LED interface.
-
-	  Which GPIO is attached to the LED is usually not described in the
-	  ACPI tables, so this driver contains per-system info about the GPIO
-	  inside the driver, this means that this driver only works on systems
-	  the driver knows about.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel_atomisp2_led.
-
-config INTEL_ATOMISP2_PM
-	tristate "Intel AtomISP2 dummy / power-management driver"
-	depends on PCI && IOSF_MBI && PM
-	depends on !INTEL_ATOMISP
-	help
-	  Power-management driver for Intel's Image Signal Processor found on
-	  Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
-	  is to turn the ISP off (put it in D3) to save power and to allow
-	  entering of S0ix modes.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel_atomisp2_pm.
-
 config INTEL_HID_EVENT
 	tristate "INTEL HID Event"
 	depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 6fd63ff22e38..1f3e48a1721f 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -71,8 +71,6 @@ obj-$(CONFIG_THINKPAD_LMI)	+= think-lmi.o
 # Intel
 obj-$(CONFIG_X86_PLATFORM_DRIVERS_INTEL)		+= intel/
 
-obj-$(CONFIG_INTEL_ATOMISP2_LED)	+= intel_atomisp2_led.o
-obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= intel_atomisp2_pm.o
 obj-$(CONFIG_INTEL_HID_EVENT)		+= intel-hid.o
 obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
 obj-$(CONFIG_INTEL_OAKTRAIL)		+= intel_oaktrail.o
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 02a2161894d2..351640511eee 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -16,6 +16,7 @@ menuconfig X86_PLATFORM_DRIVERS_INTEL
 
 if X86_PLATFORM_DRIVERS_INTEL
 
+source "drivers/platform/x86/intel/atomisp2/Kconfig"
 source "drivers/platform/x86/intel/int1092/Kconfig"
 source "drivers/platform/x86/intel/int33fe/Kconfig"
 source "drivers/platform/x86/intel/int3472/Kconfig"
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index 5b45acd32591..e5ea0e8ba516 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -4,6 +4,7 @@
 # Intel x86 Platform-Specific Drivers
 #
 
+obj-$(CONFIG_INTEL_ATOMISP2_PDX86)	+= atomisp2/
 obj-$(CONFIG_INTEL_SAR_INT1092)		+= int1092/
 obj-$(CONFIG_INTEL_CHT_INT33FE)		+= int33fe/
 obj-$(CONFIG_INTEL_SKL_INT3472)		+= int3472/
diff --git a/drivers/platform/x86/intel/atomisp2/Kconfig b/drivers/platform/x86/intel/atomisp2/Kconfig
new file mode 100644
index 000000000000..35dd2be9d2a1
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Kconfig
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+config INTEL_ATOMISP2_PDX86
+	bool
+
+config INTEL_ATOMISP2_LED
+	tristate "Intel AtomISP v2 camera LED driver"
+	depends on GPIOLIB && LEDS_GPIO
+	select INTEL_ATOMISP2_PDX86
+	help
+	  Many Bay Trail and Cherry Trail devices come with a camera attached
+	  to Intel's Image Signal Processor. Linux currently does not have a
+	  driver for these, so they do not work as a camera. Some of these
+	  camera's have a LED which is controlled through a GPIO.
+
+	  Some of these devices have a firmware issue where the LED gets turned
+	  on at boot. This driver will turn the LED off at boot and also allows
+	  controlling the LED (repurposing it) through the sysfs LED interface.
+
+	  Which GPIO is attached to the LED is usually not described in the
+	  ACPI tables, so this driver contains per-system info about the GPIO
+	  inside the driver, this means that this driver only works on systems
+	  the driver knows about.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_atomisp2_led.
+
+config INTEL_ATOMISP2_PM
+	tristate "Intel AtomISP v2 dummy / power-management driver"
+	depends on PCI && IOSF_MBI && PM
+	depends on !INTEL_ATOMISP
+	select INTEL_ATOMISP2_PDX86
+	help
+	  Power-management driver for Intel's Image Signal Processor found on
+	  Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
+	  is to turn the ISP off (put it in D3) to save power and to allow
+	  entering of S0ix modes.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_atomisp2_pm.
diff --git a/drivers/platform/x86/intel/atomisp2/Makefile b/drivers/platform/x86/intel/atomisp2/Makefile
new file mode 100644
index 000000000000..96b1e877d1f1
--- /dev/null
+++ b/drivers/platform/x86/intel/atomisp2/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+intel_atomisp2_led-y			:= led.o
+obj-$(CONFIG_INTEL_ATOMISP2_LED)	+= intel_atomisp2_led.o
+intel_atomisp2_pm-y			+= pm.o
+obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= intel_atomisp2_pm.o
diff --git a/drivers/platform/x86/intel_atomisp2_led.c b/drivers/platform/x86/intel/atomisp2/led.c
similarity index 100%
rename from drivers/platform/x86/intel_atomisp2_led.c
rename to drivers/platform/x86/intel/atomisp2/led.c
diff --git a/drivers/platform/x86/intel_atomisp2_pm.c b/drivers/platform/x86/intel/atomisp2/pm.c
similarity index 100%
rename from drivers/platform/x86/intel_atomisp2_pm.c
rename to drivers/platform/x86/intel/atomisp2/pm.c
-- 
2.32.0


  parent reply	other threads:[~2021-08-19 16:38 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-19 16:37 [PATCH v4 00/21] platform/x86: Intel platform driver code movement Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 01/21] platform/x86: intel_bxtwc_tmu: Move to intel sub-directory Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 02/21] platform/x86: intel_chtdc_ti_pwrbtn: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 03/21] platform/x86: intel_mrfld_pwrbtn: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 04/21] platform/x86: intel_punit_ipc: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 05/21] platform/x86: intel_pmc_core: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 06/21] platform/x86: intel_scu: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 07/21] platform/x86: intel_telemetry: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 08/21] platform/x86: intel_ips: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 09/21] platform/x86: intel-rst: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 10/21] platform/x86: intel-smartconnect: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 11/21] platform/x86: intel_turbo_max_3: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 12/21] platform/x86: intel-uncore-frequency: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 13/21] platform/x86: intel_speed_select_if: " Andy Shevchenko
2021-08-19 16:37 ` Andy Shevchenko [this message]
2021-08-19 16:37 ` [PATCH v4 15/21] platform/x86: intel-hid: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 16/21] platform/x86: intel_int0002_vgpio: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 17/21] platform/x86: intel_oaktrail: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 18/21] platform/x86: intel-vbtn: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 19/21] platform/x86: intel-wmi-sbl-fw-update: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 20/21] platform/x86: intel-wmi-thunderbolt: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 21/21] platform/x86/intel: scu: Fix doc of intel_scu_ipc_dev_command_with_size() Andy Shevchenko
2021-08-19 17:46 ` [PATCH v4 00/21] platform/x86: Intel platform driver code movement Andy Shevchenko
2021-08-19 18:46 ` Hans de Goede
2021-08-20 10:12   ` Andy Shevchenko
2021-08-20 10:22     ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210819163735.81803-15-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=Dell.Client.Kernel@dell.com \
    --cc=acelan.kao@canonical.com \
    --cc=alex.hung@canonical.com \
    --cc=david.e.box@intel.com \
    --cc=david.e.box@linux.intel.com \
    --cc=hdegoede@redhat.com \
    --cc=hpa@redhat.com \
    --cc=irenic.rajneesh@gmail.com \
    --cc=jithu.joseph@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maurice.ma@intel.com \
    --cc=mgross@linux.intel.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=qipeng.zha@intel.com \
    --cc=srinivas.pandruvada@linux.intel.com \
    --subject='Re: [PATCH v4 14/21] platform/x86: intel_atomisp2: Move to intel sub-directory' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).