From: Gayatri Kammela <gayatri.kammela@intel.com>
To: platform-driver-x86@vger.kernel.org
Cc: mgross@linux.intel.com, hdegoede@redhat.com,
irenic.rajneesh@gmail.com, andriy.shevchenko@linux.intel.com,
vicamo.yang@canonical.com, srinivas.pandruvada@intel.com,
david.e.box@intel.com, linux-kernel@vger.kernel.org,
tamar.mashiah@intel.com, gregkh@linuxfoundation.org,
rajatja@google.com, Gayatri Kammela <gayatri.kammela@intel.com>
Subject: [PATCH v2 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder
Date: Wed, 7 Jul 2021 19:07:21 -0700 [thread overview]
Message-ID: <ffbbbc22605014d0de6eabaf7f1441a761456cb2.1625709047.git.gayatri.kammela@intel.com> (raw)
In-Reply-To: <cover.1625709047.git.gayatri.kammela@intel.com>
As part of collecting Intel x86 specific drivers in their own
folder, move intel_pmc_core* files to its own subfolder there.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: David Box <david.e.box@intel.com>
Cc: You-Sheng Yang <vicamo.yang@canonical.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
---
drivers/platform/x86/Kconfig | 21 ------------------
drivers/platform/x86/Makefile | 1 -
drivers/platform/x86/intel/Kconfig | 1 +
drivers/platform/x86/intel/Makefile | 1 +
drivers/platform/x86/intel/pmc/Kconfig | 22 +++++++++++++++++++
drivers/platform/x86/intel/pmc/Makefile | 5 +++++
.../x86/{ => intel/pmc}/intel_pmc_core.c | 0
.../x86/{ => intel/pmc}/intel_pmc_core.h | 0
.../{ => intel/pmc}/intel_pmc_core_pltdrv.c | 0
9 files changed, 29 insertions(+), 22 deletions(-)
create mode 100644 drivers/platform/x86/intel/pmc/Kconfig
create mode 100644 drivers/platform/x86/intel/pmc/Makefile
rename drivers/platform/x86/{ => intel/pmc}/intel_pmc_core.c (100%)
rename drivers/platform/x86/{ => intel/pmc}/intel_pmc_core.h (100%)
rename drivers/platform/x86/{ => intel/pmc}/intel_pmc_core_pltdrv.c (100%)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 7d385c3b2239..cae72922f448 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1184,27 +1184,6 @@ config INTEL_MRFLD_PWRBTN
To compile this driver as a module, choose M here: the module
will be called intel_mrfld_pwrbtn.
-config INTEL_PMC_CORE
- tristate "Intel PMC Core driver"
- depends on PCI
- depends on ACPI
- help
- The Intel Platform Controller Hub for Intel Core SoCs provides access
- to Power Management Controller registers via various interfaces. This
- driver can utilize debugging capabilities and supported features as
- exposed by the Power Management Controller. It also may perform some
- tasks in the PMC in order to enable transition into the SLPS0 state.
- It should be selected on all Intel platforms supported by the driver.
-
- Supported features:
- - SLP_S0_RESIDENCY counter
- - PCH IP Power Gating status
- - LTR Ignore / LTR Show
- - MPHY/PLL gating status (Sunrisepoint PCH only)
- - SLPS0 Debug registers (Cannonlake/Icelake PCH)
- - Low Power Mode registers (Tigerlake and beyond)
- - PMC quirks as needed to enable SLPS0/S0ix
-
config INTEL_PMT_CLASS
tristate
help
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 7ee369aab10d..43d36f8c36f1 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -128,7 +128,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-uncore-frequency.o
obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o
obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o
obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o
-obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o intel_pmc_core_pltdrv.o
obj-$(CONFIG_INTEL_PMT_CLASS) += intel_pmt_class.o
obj-$(CONFIG_INTEL_PMT_TELEMETRY) += intel_pmt_telemetry.o
obj-$(CONFIG_INTEL_PMT_CRASHLOG) += intel_pmt_crashlog.o
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index f2eef337eb98..8ca021785f67 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -18,5 +18,6 @@ if X86_PLATFORM_DRIVERS_INTEL
source "drivers/platform/x86/intel/int33fe/Kconfig"
source "drivers/platform/x86/intel/int3472/Kconfig"
+source "drivers/platform/x86/intel/pmc/Kconfig"
endif # X86_PLATFORM_DRIVERS_INTEL
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index 0653055942d5..49962f4dfdec 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -6,3 +6,4 @@
obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/
obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/
+obj-$(CONFIG_INTEL_PMC_CORE) += pmc/
diff --git a/drivers/platform/x86/intel/pmc/Kconfig b/drivers/platform/x86/intel/pmc/Kconfig
new file mode 100644
index 000000000000..b4c955a35674
--- /dev/null
+++ b/drivers/platform/x86/intel/pmc/Kconfig
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config INTEL_PMC_CORE
+ tristate "Intel PMC Core driver"
+ depends on PCI
+ depends on ACPI
+ help
+ The Intel Platform Controller Hub for Intel Core SoCs provides access
+ to Power Management Controller registers via various interfaces. This
+ driver can utilize debugging capabilities and supported features as
+ exposed by the Power Management Controller. It also may perform some
+ tasks in the PMC in order to enable transition into the SLPS0 state.
+ It should be selected on all Intel platforms supported by the driver.
+
+ Supported features:
+ - SLP_S0_RESIDENCY counter
+ - PCH IP Power Gating status
+ - LTR Ignore / LTR Show
+ - MPHY/PLL gating status (Sunrisepoint PCH only)
+ - SLPS0 Debug registers (Cannonlake/Icelake PCH)
+ - Low Power Mode registers (Tigerlake and beyond)
+ - PMC quirks as needed to enable SLPS0/S0ix
diff --git a/drivers/platform/x86/intel/pmc/Makefile b/drivers/platform/x86/intel/pmc/Makefile
new file mode 100644
index 000000000000..633a7598d6d6
--- /dev/null
+++ b/drivers/platform/x86/intel/pmc/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o
+obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core_pltdrv.o
diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel/pmc/intel_pmc_core.c
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core.c
rename to drivers/platform/x86/intel/pmc/intel_pmc_core.c
diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel/pmc/intel_pmc_core.h
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core.h
rename to drivers/platform/x86/intel/pmc/intel_pmc_core.h
diff --git a/drivers/platform/x86/intel_pmc_core_pltdrv.c b/drivers/platform/x86/intel/pmc/intel_pmc_core_pltdrv.c
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core_pltdrv.c
rename to drivers/platform/x86/intel/pmc/intel_pmc_core_pltdrv.c
--
2.25.1
next prev parent reply other threads:[~2021-07-08 2:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-08 2:07 [PATCH v2 0/5] Add Alder Lake PCH-S support to PMC core driver Gayatri Kammela
2021-07-08 2:07 ` Gayatri Kammela [this message]
2021-07-08 7:56 ` [PATCH v2 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder Andy Shevchenko
2021-07-09 17:39 ` Kammela, Gayatri
2021-07-08 2:07 ` [PATCH v2 2/5] platform/x86/intel: intel_pmc_core: Add Alderlake support to pmc_core driver Gayatri Kammela
2021-07-08 2:07 ` [PATCH v2 3/5] platform/x86/intel: intel_pmc_core: Add Latency Tolerance Reporting (LTR) support to Alder Lake Gayatri Kammela
2021-07-08 2:07 ` [PATCH v2 4/5] platform/x86/intel: intel_pmc_core: Add Alder Lake low power mode support for pmc_core Gayatri Kammela
2021-07-08 2:07 ` [PATCH v2 5/5] platform/x86/intel: intel_pmc_core: Add GBE Package C10 fix for Alder Lake PCH Gayatri Kammela
2021-07-08 17:32 ` [PATCH v2 0/5] Add Alder Lake PCH-S support to PMC core driver Rajneesh Bhardwaj
2021-07-09 17:40 ` Kammela, Gayatri
2021-07-09 18:30 ` Limonciello, Mario
2021-07-09 23:01 ` Kammela, Gayatri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ffbbbc22605014d0de6eabaf7f1441a761456cb2.1625709047.git.gayatri.kammela@intel.com \
--to=gayatri.kammela@intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=david.e.box@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=irenic.rajneesh@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgross@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rajatja@google.com \
--cc=srinivas.pandruvada@intel.com \
--cc=tamar.mashiah@intel.com \
--cc=vicamo.yang@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).