qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	Eduardo Habkost <ehabkost@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PULL v2 05/45] virtio: move VirtQueueElement at the beginning of the structs
Date: Sat, 6 Feb 2016 21:12:26 +0200	[thread overview]
Message-ID: <1454784308-21177-6-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1454784308-21177-1-git-send-email-mst@redhat.com>

From: Paolo Bonzini <pbonzini@redhat.com>

The next patch will make virtqueue_pop/vring_pop allocate memory for
the VirtQueueElement. In some cases (blk, scsi, gpu) the device wants
to extend VirtQueueElement with device-specific fields and, until now,
the place of the VirtQueueElement within the containing struct didn't
matter. When allocating the entire block in virtqueue_pop/vring_pop,
however, the containing struct must basically be a "subclass" of
VirtQueueElement, with the VirtQueueElement as the first field. Make
that the case for blk and scsi; gpu is already doing it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
---
 include/hw/virtio/virtio-blk.h  |  2 +-
 include/hw/virtio/virtio-scsi.h | 13 ++++++-------
 hw/scsi/virtio-scsi.c           |  3 +--
 3 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index ae11a63..403ab86 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -60,9 +60,9 @@ typedef struct VirtIOBlock {
 } VirtIOBlock;
 
 typedef struct VirtIOBlockReq {
+    VirtQueueElement elem;
     int64_t sector_num;
     VirtIOBlock *dev;
-    VirtQueueElement elem;
     struct virtio_blk_inhdr *in;
     struct virtio_blk_outhdr out;
     QEMUIOVector qiov;
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 0394eb2..eb9d25b 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -112,18 +112,17 @@ typedef struct VirtIOSCSI {
 } VirtIOSCSI;
 
 typedef struct VirtIOSCSIReq {
+    /* Note:
+     * - fields up to resp_iov are initialized by virtio_scsi_init_req;
+     * - fields starting at vring are zeroed by virtio_scsi_init_req.
+     * */
+    VirtQueueElement elem;
+
     VirtIOSCSI *dev;
     VirtQueue *vq;
     QEMUSGList qsgl;
     QEMUIOVector resp_iov;
 
-    /* Note:
-     * - fields before elem are initialized by virtio_scsi_init_req;
-     * - elem is uninitialized at the time of allocation.
-     * - fields after elem are zeroed by virtio_scsi_init_req.
-     * */
-
-    VirtQueueElement elem;
     /* Set by dataplane code. */
     VirtIOSCSIVring *vring;
 
diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 1500c42..7fdf6ad 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -45,8 +45,7 @@ VirtIOSCSIReq *virtio_scsi_init_req(VirtIOSCSI *s, VirtQueue *vq)
 {
     VirtIOSCSIReq *req;
     VirtIOSCSICommon *vs = (VirtIOSCSICommon *)s;
-    const size_t zero_skip = offsetof(VirtIOSCSIReq, elem)
-                             + sizeof(VirtQueueElement);
+    const size_t zero_skip = offsetof(VirtIOSCSIReq, vring);
 
     req = g_malloc(sizeof(*req) + vs->cdb_size);
     req->vq = vq;
-- 
MST

  parent reply	other threads:[~2016-02-06 19:12 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-06 19:12 [Qemu-devel] [PULL v2 00/45] pc and misc cleanups and fixes, virtio optimizations Michael S. Tsirkin
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 01/45] Fix virtio migration Michael S. Tsirkin
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 02/45] pc: acpi: merge SSDT into DSDT Michael S. Tsirkin
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 03/45] tests: pc: acpi: drop not needed 'expected SSDT' blobs Michael S. Tsirkin
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 04/45] tests: pc: acpi: add expected DSDT.bridge blobs and update DSDT blobs Michael S. Tsirkin
2016-02-06 19:12 ` Michael S. Tsirkin [this message]
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 06/45] virtio: move allocation to virtqueue_pop/vring_pop Michael S. Tsirkin
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 07/45] virtio: introduce qemu_get/put_virtqueue_element Michael S. Tsirkin
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 08/45] virtio: introduce virtqueue_alloc_element Michael S. Tsirkin
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 09/45] virtio: slim down allocation of VirtQueueElements Michael S. Tsirkin
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 10/45] vring: " Michael S. Tsirkin
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 11/45] virtio: combine the read of a descriptor Michael S. Tsirkin
2016-02-06 19:12 ` [Qemu-devel] [PULL v2 12/45] virtio: cache used_idx in a VirtQueue field Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 13/45] virtio: read avail_idx from VQ only when necessary Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 14/45] virtio: combine write of an entry into used ring Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 15/45] hw/pxb: add pxb devices to the bridge category Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 16/45] vhost-user-test: use correct ROM to speed up and avoid spurious failures Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 17/45] hw/pci: ensure that only PCI/PCIe bridges can be attached to pxb/pxb-pcie devices Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 18/45] ipmi: replace goto by a return statement Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 19/45] ipmi: replace *_MAXCMD defines Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 20/45] ipmi: cleanup error_report messages Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 21/45] ipmi: fix SDR length value Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 22/45] ipmi: introduce a struct ipmi_sdr_compact Michael S. Tsirkin
2016-02-16  7:45   ` Paolo Bonzini
2016-02-16  8:11     ` Cédric Le Goater
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 23/45] ipmi: add get and set SENSOR_TYPE commands Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 24/45] ipmi: add GET_SYS_RESTART_CAUSE chassis command Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 25/45] ipmi: add ACPI power and GUID commands Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 26/45] pc: Move PcGuestInfo declaration to top of file Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 27/45] pc: Eliminate struct PcGuestInfoState Michael S. Tsirkin
2016-02-06 19:13 ` [Qemu-devel] [PULL v2 28/45] pc: Simplify pc_memory_init() signature Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 29/45] pc: Simplify xen_load_linux() signature Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 30/45] acpi: Remove guest_info parameters from functions Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 31/45] acpi: Don't save PcGuestInfo on AcpiBuildState Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 32/45] pc: Remove compat fields from PcGuestInfo Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 33/45] pc: Remove RAM size " Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 34/45] pc: Remove PcGuestInfo.isapc_ram_fw field Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 35/45] pc: Move PcGuestInfo.fw_cfg to PCMachineState Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 36/45] pc: Move APIC and NUMA data from PcGuestInfo " Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 37/45] pc: Eliminate PcGuestInfo struct Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 38/45] acpi: take oem_id in build_header(), optionally Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 39/45] acpi: expose oem_id and oem_table_id in build_rsdt() Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 40/45] acpi: add function to extract oem_id and oem_table_id from the user's SLIC Michael S. Tsirkin
2016-02-06 19:14 ` [Qemu-devel] [PULL v2 41/45] pc: set the OEM fields in the RSDT and the FADT from the SLIC Michael S. Tsirkin
2016-02-06 19:15 ` [Qemu-devel] [PULL v2 42/45] dimm: Correct type of MemoryHotplugState->base Michael S. Tsirkin
2016-02-06 19:15 ` [Qemu-devel] [PULL v2 43/45] intel_iommu: large page support Michael S. Tsirkin
2016-02-06 19:15 ` [Qemu-devel] [PULL v2 44/45] fix MSI injection on Xen Michael S. Tsirkin
2016-02-12 21:55   ` Daniel P. Berrange
2016-02-06 19:15 ` [Qemu-devel] [PULL v2 45/45] net: set endianness on all backend devices Michael S. Tsirkin
2016-02-08 12:32 ` [Qemu-devel] [PULL v2 00/45] pc and misc cleanups and fixes, virtio optimizations Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454784308-21177-6-git-send-email-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=cornelia.huck@de.ibm.com \
    --cc=ehabkost@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).