From: Aleksandar Markovic <aleksandar.markovic@rt-rk.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, laurent@vivier.eu, riku.voipio@iki.fi,
philippe.mathieu.daude@gmail.com, aurelien@aurel32.net,
richard.henderson@linaro.org, amarkovic@wavecomp.com,
smarkovic@wavecomp.com, pjovanovic@wavecomp.com,
pburton@wavecomp.com
Subject: [Qemu-devel] [PATCH v8 00/87] Add nanoMIPS support to QEMU
Date: Mon, 13 Aug 2018 19:52:25 +0200 [thread overview]
Message-ID: <1534182832-554-1-git-send-email-aleksandar.markovic@rt-rk.com> (raw)
From: Aleksandar Markovic <amarkovic@wavecomp.com>
v7->v8:
- the series is slightly reorganized so that:
- patches 1-19 are fixes and improvements that are not
dependent on the existence of nanoMIPS (even though most
of them are logicaly connected to (and necessary for)
nanoMIPS support) - they fix and improve pre-nanoMIPS code
- patches 20-65 introduce core nanoMIPS functionality, but
do not contain any dependence on or reference to nanoMIPS
Linux ABI
- patches 66-87 mostly deal with Linux user mode-related
nanoMIPS functionality, therefore dependent on nanoMIPS
Linux ABI
- the series will probably be split into three (corresponding
to the organization mentioned above) in near future
- added support for availability control via bit config XNP
- fixed availabitily control for LLWP/SCWP
- added support for availability control via bit config MT
- fixed availabitily control for pre-nanoMIPS MT ASE
- fixed availabitily control for nanoMIPS MT ASE
- completely removed case-statements defined by integer range
from translate.c
- patch on nanoMIPS specifics in ELF headers split into two
- patch on GT64120-related functionality in nanoMIPS bootloader
updated with comments and reorganizes with respect to
endianness
- replaced one instance of shift/mask with extract32()
- fixed one instance of missing default case in decoding engine
- removed several instances of unnecessary default case in
decoding engine
- minor tweaks related to variable scope and naming
- fixed several spelling mistakes in commit messages
- rebased to the latest code
v6->v7:
- found a better place for MIPS_ARCH in elf.h
- improved patch for LLWP and SCWP
- fixed missing availability control, alignment, usage
of extract32() in DSP patches
- added disassembler support for microMIPS and nanoMIPS
- removed unnecessary addition of one empty line in the
patch on WR bit
- improved statx() syscall translation
- improved nanoMIPS items in binfmt script
- amended pre-nanoMIPS items in qemu-doc.texi
- added nanoMIPS items in qemu-doc.texi
- changed slightly patch order to be logicaly more
comprehensive
- rebased to the latest code
- NOTE: there will be some sheckpatch.pl errors and warning
for this series; however, we think those are flase positives
in these particular circumstances - therefore we will not
change any patch related to these checkpatch.pl messages
v5->v6:
- used names offset and imm instead of rd and rs when
appropriate
- used gen_op_addr_addi when appropriate in one more place
- avoided usage of tcg_temp_local_new
- avoided unnecessary sign extension related to addr_add
- fixed unprotected storing to cpu_gpr[0]
- removed some unnecessary testing for ISA_NANOMIPS
- updated patch for LLWP and SCWP
- extract32 inserted instead of shift/mask in DSP patches
- removed useless casts from DSP patches
- reorganized functions to eliminated duplicated loading of
gpr values into tcg variables in DSP patches
- check Config1.WR bit for Watch registers only when using
in runtime
- removed duplicated check for bad address in PC register
- added support for statx system call
- updated script qemu-binfmt-conf.sh for nanoMIPS
- rebased to the latest code
v4->v5:
- merged series "Mips maintenance and misc fixes and improvements"
and this one for easier handling (there are build dependencies)
- eliminated shadow variables from translate.c
- replaced shift/mask combination with extract32()
- added new function gen_op_addr_addi()
- added patch for LLWP and SCWP
- added "fall through" comments at appropriate places
- eliminated micromips flag from I7200 definition
- numerous other enhancements originating from reviewer's
comments
- some of the patches split into two or more for easier
handling and review
- rebased to the latest code
v3->v4:
- added support for nanoMIPS user mode functionality and
configuration
- DSP patch split into three for easier review and handling
- corrected indentation in all decoding engine patches
- shift/mask replaced with equivalent extract32() in some
patches
- added missing default cases in some patches
- refactored invocation logic aroung decode_nanomips_opc()
- improved comments before decode_gpr_XXX() utilities
- all four decode_gpr_XXX() are now in a single patch
- two patches on updating BadInstr and related registers
are now merged, and execution logic improved
- minor formatting corrections
- rebased to the latest code
v2->v3:
- added support for nanoMIPS-specifics in ELF headers
- added support for CP0 Config0.WR bit
- updated I7200 definition
- improved indentation of some switch statements
- slight reorganization of patches (splitting, order)
- rebased to the latest code
v1->v2:
- added DSP ASE support
- added MT ASE support
- added GDB XML support
- order of patches changed
- commit messages and patch title improved across the board
- obsolete email addresses for authors and cosigners replaced
with the right ones
- some functions renamed to reflect better the documentation
- some macros renamed to reflect better their nanoMIPS nature
- streamlined formatting
- some of other reviewer's comments addressed, but the majority
was not; this is because the focus of this version was on
completing the functionality as much as possible; remaining
comments will be addressed in the subsequent versions of this
series
This series of patches implements recently announced nanoMIPS on QEMU.
nanoMIPS is a variable length ISA containing 16, 32 and 48-bit wide
instructions. It is designed to be portable at assembly level with
other MIPS and microMIPS code, but contains a number of changes that
enhance code density and efficiency. The largest portion of patches
is nanoMIPS decoding engine.
For more information, please refer to the following link:
https://www.mips.com/products/architectures/nanomips/
Aleksandar Markovic (16):
MAINTAINERS: Update target/mips maintainer's email addresses
target/mips: Avoid case statements formulated by ranges - part 1
target/mips: Mark switch fallthroughs with interpretable comments
target/mips: Fix two instances of shadow variables
target/mips: Update some CP0 registers bit definitions
elf: Remove duplicate preprocessor constant definition
elf: Add ELF flags for MIPS machine variants
linux-user: Update MIPS syscall numbers up to kernel 4.18 headers
qemu-doc: Amend MIPS-related items
target/mips: Add preprocessor constants for nanoMIPS
target/mips: Add placeholder and invocation of decode_nanomips_opc()
target/mips: Add nanoMIPS decoding and extraction utilities
elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too
elf: Don't check FCR31_NAN2008 bit for nanoMIPS
linux-user: Update syscall_defs.h header for nanoMIPS
qemu-doc: Add nanoMIPS-related items
Aleksandar Rikalo (20):
target/mips: Avoid case statements formulated by ranges - part 2
target/mips: Add support for availability control via bit XNP
target/mips: Add support for availability control via bit MT
target/mips: Fix MT ASE instructions' availability control
linux-user: Add preprocessor availability control to some syscalls
target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair
elf: Add EM_NANOMIPS value as a valid one for e_machine field
elf: On elf loading, treat both EM_MIPS and EM_NANOMIPS as legal for
MIPS
elf: Add nanoMIPS specific variations in ELF header fields
linux-user: Add syscall numbers for nanoMIPS
linux-user: Add target_signal.h header for nanoMIPS
linux-user: Add termbits.h header for nanoMIPS
linux-user: Add target_fcntl.h header for nanoMIPS
linux-user: Add sockbits.h header for nanoMIPS
linux-user: Add target_syscall.h header for nanoMIPS
linux-user: Add support for nanoMIPS signal trampoline
linux-user: Amend support for sigaction() syscall for nanoMIPS
linux-user: Add support for statx() syscall for all platforms
linux-user: Add support for nanoMIPS core files
linux-user: Add nanoMIPS support in scripts/qemu-binfmt-conf.sh
Dimitrije Nikolic (5):
linux-user: Add target_cpu.h header for nanoMIPS
linux-user: Add target_structs.h header for nanoMIPS
linux-user: Add target_elf.h header for nanoMIPS
linux-user: Add signal.c for nanoMIPS
linux-user: Add cpu_loop.c for nanoMIPS
James Hogan (5):
target/mips: Implement emulation of nanoMIPS EXTW instruction
target/mips: Adjust exception_resume_pc() for nanoMIPS
target/mips: Adjust set_hflags_for_handler() for nanoMIPS
target/mips: Adjust set_pc() for nanoMIPS
gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub
Matthew Fortune (5):
target/mips: Add emulation of nanoMIPS 16-bit save and restore
instructions
target/mips: Implement emulation of nanoMIPS ROTX instruction
disas: Add support for microMIPS and nanoMIPS
target/mips: Add handling of branch delay slots for nanoMIPS
mips_malta: Add basic nanoMIPS boot code for Malta board
Paul Burton (1):
mips_malta: Add setting up GT64120 BARs to the nanoMIPS bootloader
Stefan Markovic (16):
target/mips: Add CP0 BadInstrX register
target/mips: Implement CP0 Config1.WR bit functionality
target/mips: Add gen_op_addr_addi()
target/mips: Add nanoMIPS DSP ASE opcodes
target/mips: Implement MT ASE support for nanoMIPS
target/mips: Add emulation of DSP ASE for nanoMIPS - part 1
target/mips: Add emulation of DSP ASE for nanoMIPS - part 2
target/mips: Add emulation of DSP ASE for nanoMIPS - part 3
target/mips: Add emulation of DSP ASE for nanoMIPS - part 4
target/mips: Add emulation of DSP ASE for nanoMIPS - part 5
target/mips: Add emulation of DSP ASE for nanoMIPS - part 6
target/mips: Add updating BadInstr, BadInstrP, BadInstrX for nanoMIPS
mips_malta: Fix semihosting argument passing for nanoMIPS bare metal
target/mips: Add definition of nanoMIPS I7200 CPU
linux-user: Add nanoMIPS linux user mode configuration support
gdbstub: Add XML support for GDB for nanoMIPS
Yongbok Kim (19):
target/mips: Don't update BadVAddr register in Debug Mode
target/mips: Check ELPA flag only in some cases of MFHC0 and MTHC0
target/mips: Add nanoMIPS base instruction set opcodes
target/mips: Add emulation of nanoMIPS 16-bit arithmetic instructions
target/mips: Add emulation of nanoMIPS 16-bit branch instructions
target/mips: Add emulation of nanoMIPS 16-bit shift instructions
target/mips: Add emulation of nanoMIPS 16-bit misc instructions
target/mips: Add emulation of nanoMIPS 16-bit load and store
instructions
target/mips: Add emulation of nanoMIPS 16-bit logic instructions
target/mips: Add emulation of some common nanoMIPS 32-bit instructions
target/mips: Add emulation of nanoMIPS instructions MOVE.P and
MOVE.PREV
target/mips: Add emulation of nanoMIPS 48-bit instructions
target/mips: Add emulation of nanoMIPS FP instructions
target/mips: Add emulation of misc nanoMIPS instructions (pool32a0)
target/mips: Add emulation of misc nanoMIPS instructions (pool32axf)
target/mips: Add emulation of misc nanoMIPS instructions (p_lsx)
target/mips: Add emulation of nanoMIPS 32-bit load and store
instructions
target/mips: Add emulation of nanoMIPS 32-bit branch instructions
target/mips: Fix ERET/ERETNC behavior related to ADEL exception
.mailmap | 7 +-
MAINTAINERS | 12 +-
configure | 13 +-
default-configs/nanomips-linux-user.mak | 1 +
disas/Makefile.objs | 1 +
disas/mips.c | 358 +-
disas/nanomips.cpp | 15752 ++++++++++++++++++++++++++++++
disas/nanomips.h | 1208 +++
gdb-xml/nanomips-cp0.xml | 13 +
gdb-xml/nanomips-cpu.xml | 44 +
gdb-xml/nanomips-dsp.xml | 20 +
gdb-xml/nanomips-fpu.xml | 45 +
gdb-xml/nanomips-linux.xml | 20 +
hw/mips/mips_malta.c | 212 +-
include/disas/bfd.h | 1 +
include/elf.h | 44 +-
include/hw/elf_ops.h | 8 +
linux-user/elfload.c | 12 +-
linux-user/mips/cpu_loop.c | 36 +-
linux-user/mips/signal.c | 36 +-
linux-user/mips/syscall_nr.h | 9 +
linux-user/mips/termbits.h | 4 +
linux-user/mips64/syscall_nr.h | 18 +
linux-user/nanomips/cpu_loop.c | 1 +
linux-user/nanomips/signal.c | 1 +
linux-user/nanomips/sockbits.h | 1 +
linux-user/nanomips/syscall_nr.h | 275 +
linux-user/nanomips/target_cpu.h | 21 +
linux-user/nanomips/target_elf.h | 14 +
linux-user/nanomips/target_fcntl.h | 38 +
linux-user/nanomips/target_signal.h | 22 +
linux-user/nanomips/target_structs.h | 1 +
linux-user/nanomips/target_syscall.h | 30 +
linux-user/nanomips/termbits.h | 1 +
linux-user/strace.c | 14 +-
linux-user/syscall.c | 150 +-
linux-user/syscall_defs.h | 95 +-
qemu-doc.texi | 15 +-
scripts/qemu-binfmt-conf.sh | 16 +-
target/mips/cpu.c | 12 +-
target/mips/cpu.h | 164 +-
target/mips/gdbstub.c | 13 +-
target/mips/helper.c | 35 +-
target/mips/helper.h | 2 +
target/mips/internal.h | 9 +-
target/mips/machine.c | 5 +-
target/mips/mips-defs.h | 4 +
target/mips/op_helper.c | 113 +-
target/mips/translate.c | 4997 +++++++++-
target/mips/translate_init.inc.c | 39 +
50 files changed, 23718 insertions(+), 244 deletions(-)
create mode 100644 default-configs/nanomips-linux-user.mak
create mode 100644 disas/nanomips.cpp
create mode 100644 disas/nanomips.h
create mode 100644 gdb-xml/nanomips-cp0.xml
create mode 100644 gdb-xml/nanomips-cpu.xml
create mode 100644 gdb-xml/nanomips-dsp.xml
create mode 100644 gdb-xml/nanomips-fpu.xml
create mode 100644 gdb-xml/nanomips-linux.xml
create mode 100644 linux-user/nanomips/cpu_loop.c
create mode 100644 linux-user/nanomips/signal.c
create mode 100644 linux-user/nanomips/sockbits.h
create mode 100644 linux-user/nanomips/syscall_nr.h
create mode 100644 linux-user/nanomips/target_cpu.h
create mode 100644 linux-user/nanomips/target_elf.h
create mode 100644 linux-user/nanomips/target_fcntl.h
create mode 100644 linux-user/nanomips/target_signal.h
create mode 100644 linux-user/nanomips/target_structs.h
create mode 100644 linux-user/nanomips/target_syscall.h
create mode 100644 linux-user/nanomips/termbits.h
--
2.7.4
next reply other threads:[~2018-08-13 17:54 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-13 17:52 Aleksandar Markovic [this message]
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 01/87] MAINTAINERS: Update target/mips maintainer's email addresses Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 02/87] target/mips: Avoid case statements formulated by ranges - part 1 Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 03/87] target/mips: Avoid case statements formulated by ranges - part 2 Aleksandar Markovic
2018-08-14 11:13 ` Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 04/87] target/mips: Mark switch fallthroughs with interpretable comments Aleksandar Markovic
2019-07-07 20:26 ` [Qemu-devel] Handling of fall through code (was: " Stefan Weil
2019-07-08 4:40 ` Markus Armbruster
2019-07-08 4:52 ` [Qemu-devel] Handling of fall through code Stefan Weil
2019-07-09 5:40 ` Markus Armbruster
2019-07-08 8:14 ` [Qemu-devel] Handling of fall through code (was: [PATCH v8 04/87] target/mips: Mark switch fallthroughs with interpretable comments Aleksandar Markovic
2019-07-08 12:04 ` Stefan Weil
2019-07-08 12:08 ` Daniel P. Berrangé
2019-07-08 19:39 ` Aleksandar Markovic
2019-07-09 8:25 ` Peter Maydell
2019-07-21 16:39 ` [Qemu-devel] Handling of fall through code Stefan Weil
2019-07-22 9:09 ` Peter Maydell
2019-07-08 8:42 ` [Qemu-devel] Handling of fall through code (was: [PATCH v8 04/87] target/mips: Mark switch fallthroughs with interpretable comments Peter Maydell
2019-07-09 5:42 ` Markus Armbruster
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 05/87] target/mips: Fix two instances of shadow variables Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 06/87] target/mips: Update some CP0 registers bit definitions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 07/87] target/mips: Add CP0 BadInstrX register Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 08/87] target/mips: Add support for availability control via bit XNP Aleksandar Markovic
2018-08-14 12:23 ` Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 09/87] target/mips: Add support for availability control via bit MT Aleksandar Markovic
2018-08-13 18:13 ` Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 10/87] target/mips: Fix MT ASE instructions' availability control Aleksandar Markovic
2018-08-13 18:23 ` Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 11/87] target/mips: Implement CP0 Config1.WR bit functionality Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 12/87] target/mips: Don't update BadVAddr register in Debug Mode Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 13/87] target/mips: Check ELPA flag only in some cases of MFHC0 and MTHC0 Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 14/87] target/mips: Add gen_op_addr_addi() Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 15/87] elf: Remove duplicate preprocessor constant definition Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 16/87] elf: Add ELF flags for MIPS machine variants Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 17/87] linux-user: Update MIPS syscall numbers up to kernel 4.18 headers Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 18/87] linux-user: Add preprocessor availability control to some syscalls Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 19/87] qemu-doc: Amend MIPS-related items Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 20/87] target/mips: Add preprocessor constants for nanoMIPS Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 21/87] target/mips: Add nanoMIPS base instruction set opcodes Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 22/87] target/mips: Add nanoMIPS DSP ASE opcodes Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 23/87] target/mips: Add placeholder and invocation of decode_nanomips_opc() Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 24/87] target/mips: Add nanoMIPS decoding and extraction utilities Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 25/87] target/mips: Add emulation of nanoMIPS 16-bit arithmetic instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 26/87] target/mips: Add emulation of nanoMIPS 16-bit branch instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 27/87] target/mips: Add emulation of nanoMIPS 16-bit shift instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 28/87] target/mips: Add emulation of nanoMIPS 16-bit misc instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 29/87] target/mips: Add emulation of nanoMIPS 16-bit load and store instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 30/87] target/mips: Add emulation of nanoMIPS 16-bit logic instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 31/87] target/mips: Add emulation of nanoMIPS 16-bit save and restore instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 32/87] target/mips: Add emulation of some common nanoMIPS 32-bit instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 33/87] target/mips: Add emulation of nanoMIPS instructions MOVE.P and MOVE.PREV Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 34/87] target/mips: Add emulation of nanoMIPS 48-bit instructions Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 35/87] target/mips: Add emulation of nanoMIPS FP instructions Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 36/87] target/mips: Add emulation of misc nanoMIPS instructions (pool32a0) Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 37/87] target/mips: Add emulation of misc nanoMIPS instructions (pool32axf) Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 38/87] target/mips: Add emulation of misc nanoMIPS instructions (p_lsx) Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 39/87] target/mips: Implement emulation of nanoMIPS ROTX instruction Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 40/87] target/mips: Implement emulation of nanoMIPS EXTW instruction Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 41/87] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 42/87] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair Aleksandar Markovic
2018-08-14 12:20 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 43/87] target/mips: Add emulation of nanoMIPS 32-bit branch instructions Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 44/87] target/mips: Implement MT ASE support for nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 45/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 1 Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 46/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 2 Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 47/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 3 Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 48/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 4 Aleksandar Markovic
2018-08-16 12:31 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 49/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 5 Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 50/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 6 Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 51/87] disas: Add support for microMIPS and nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 52/87] target/mips: Add handling of branch delay slots for nanoMIPS Aleksandar Markovic
2018-08-16 13:01 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 53/87] target/mips: Add updating BadInstr, BadInstrP, BadInstrX " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 54/87] target/mips: Adjust exception_resume_pc() " Aleksandar Markovic
2018-08-16 12:56 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 55/87] target/mips: Adjust set_hflags_for_handler() " Aleksandar Markovic
2018-08-16 12:05 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 56/87] target/mips: Adjust set_pc() " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 57/87] target/mips: Fix ERET/ERETNC behavior related to ADEL exception Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 58/87] elf: Add EM_NANOMIPS value as a valid one for e_machine field Aleksandar Markovic
2018-08-16 12:55 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 59/87] elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 60/87] elf: Don't check FCR31_NAN2008 bit for nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 61/87] elf: On elf loading, treat both EM_MIPS and EM_NANOMIPS as legal for MIPS Aleksandar Markovic
2018-08-16 12:28 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 62/87] mips_malta: Add basic nanoMIPS boot code for Malta board Aleksandar Markovic
2018-08-16 11:59 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 63/87] mips_malta: Add setting up GT64120 BARs to the nanoMIPS bootloader Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 64/87] mips_malta: Fix semihosting argument passing for nanoMIPS bare metal Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 65/87] target/mips: Add definition of nanoMIPS I7200 CPU Aleksandar Markovic
2018-08-16 12:26 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 66/87] elf: Add nanoMIPS specific variations in ELF header fields Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 67/87] linux-user: Add syscall numbers for nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 68/87] linux-user: Add target_signal.h header " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 69/87] linux-user: Add termbits.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 70/87] linux-user: Update syscall_defs.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 71/87] linux-user: Add target_fcntl.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 72/87] linux-user: Add sockbits.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 73/87] linux-user: Add target_syscall.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 74/87] linux-user: Add target_cpu.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 75/87] linux-user: Add target_structs.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 76/87] linux-user: Add target_elf.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 77/87] linux-user: Add signal.c " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 78/87] linux-user: Add support for nanoMIPS signal trampoline Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 79/87] linux-user: Add cpu_loop.c for nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 80/87] linux-user: Amend support for sigaction() syscall " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 81/87] linux-user: Add support for statx() syscall for all platforms Aleksandar Markovic
2018-08-20 7:48 ` Timothy Baldwin
2018-08-20 9:45 ` Aleksandar Markovic
2018-08-29 15:38 ` Timothy Baldwin
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 82/87] linux-user: Add support for nanoMIPS core files Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 83/87] linux-user: Add nanoMIPS linux user mode configuration support Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 84/87] linux-user: Add nanoMIPS support in scripts/qemu-binfmt-conf.sh Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 85/87] gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 86/87] gdbstub: Add XML support for GDB for nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 87/87] qemu-doc: Add nanoMIPS-related items Aleksandar Markovic
2018-08-14 15:52 ` [Qemu-devel] [PATCH v8 00/87] Add nanoMIPS support to QEMU Aleksandar Markovic
2018-08-16 8:16 ` no-reply
2018-08-16 11:43 ` Aleksandar Markovic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1534182832-554-1-git-send-email-aleksandar.markovic@rt-rk.com \
--to=aleksandar.markovic@rt-rk.com \
--cc=amarkovic@wavecomp.com \
--cc=aurelien@aurel32.net \
--cc=laurent@vivier.eu \
--cc=pburton@wavecomp.com \
--cc=peter.maydell@linaro.org \
--cc=philippe.mathieu.daude@gmail.com \
--cc=pjovanovic@wavecomp.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=riku.voipio@iki.fi \
--cc=smarkovic@wavecomp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).