qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
* [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine
@ 2019-08-19  5:11 Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 01/28] riscv: hw: Remove superfluous "linux, phandle" property Bin Meng
                   ` (26 more replies)
  0 siblings, 27 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

As of today, the QEMU 'sifive_u' machine is a special target that does
not boot the upstream OpenSBI/U-Boot firmware images built for the real
SiFive HiFive Unleashed board. Hence OpenSBI supports a special platform
"qemu/sifive_u". For U-Boot, the sifive_fu540_defconfig is referenced
in the OpenSBI doc as its payload, but that does not boot at all due
to various issues in current QEMU 'sifive_u' machine codes.

This series aims to improve the emulation fidelity of sifive_u machine,
so that the upstream OpenSBI, U-Boot and kernel images built for the
SiFive HiFive Unleashed board can be used out of the box without any
special hack.

The major changes include:
- Heterogeneous harts creation supported, so that we can create a CPU
  that exactly mirrors the real hardware: 1 E51 + 4 U54.
- Implemented a PRCI model for FU540
- Implemented an OTP model for FU540, primarily used for storing serial
  number of the board
- Fixed GEM support that was seriously broken on sifive_u
- Synced device tree with upstream Linux kernel on sifive_u

OpenSBI v0.4 image built for sifive/fu540 is included as the default
bios image for 'sifive_u' machine.

The series is tested against OpenSBI v0.4 image for sifive/fu540
paltform, U-Boot v2019.10-rc1 image for sifive_fu540_defconfig,
and Linux kernel v5.3-rc3 image with the following patch:

macb: Update compatibility string for SiFive FU540-C000 [1]

OpenSBI + U-Boot, ping/tftpboot with U-Boot MACB driver works well.
Boot Linux 64-bit defconfig image, verified that system console on
the serial 0 and ping host work pretty well.

An OpenSBI patch [2] was sent to drop the special "qemu/sifive_u" platform
support in OpenSBI. The original plan was to get the drop patch applied
after this QEMU series is merged. However after discussion in the OpenSBI
mailing list, it seems the best option for us is to let OpenSBI continue
shipping the special "qemu/sifive_u" platform support to work with QEMU
version <= 4.1 and deprecate the support sometime in the future. A patch
will need to be sent to OpenSBI mailing list to update its document.

v4 is now rebased on Palmer's QEMU RISC-V repo "for-master" branch.
Dropped the following v3 patch that was already done by someone else.
- riscv: sifive_u: Generate an aliases node in the device tree
- riscv: sifive_u: Support loading initramfs

The following v3 patch was dropped too due to a different cluster approach
suggested by Richard Henderson is used in v4:
- riscv: hart: Support heterogeneous harts population

[1]: https://patchwork.kernel.org/patch/11050003/
[2]: http://lists.infradead.org/pipermail/opensbi/2019-August/000335.html

Changes in v4:
- remove 2 more "linux,phandle" instances in sifive_u.c and spike.c
  after rebasing on Palmer's QEMU RISC-V tree
- change create_fdt() to return void in sifive_u.c too, after rebasing
  on Palmer's QEMU RISC-V tree
- new patch to remove executable attribute of opensbi images
- prefix all macros/variables/functions with SIFIVE_E/sifive_e
  in the sifive_e_prci driver
- new patch to add a "hartid-base" property to RISC-V hart array
- changed to create clusters for each cpu type
- prefix all macros/variables/functions with SIFIVE_U/sifive_u
  in the sifive_u_prci driver
- prefix all macros/variables/functions with SIFIVE_U/sifive_u
  in the sifive_u_otp driver
- new patch to remove handcrafted clock nodes for UART and ethernet

Changes in v3:
- changed to use macros for management and compute cpu count
- use management cpu count + 1 for the min_cpus
- update IRQ numbers of both UARTs to match hardware as well

Changes in v2:
- keep the PLIC compatible string unchanged as OpenSBI uses that
  for DT fix up
- drop patch "riscv: sifive: Move sifive_mmio_emulate() to a common place"
- new patch "riscv: sifive_e: Drop sifive_mmio_emulate()"
- fixed the "interrupts-extended" property size
- update the file header to indicate at least 2 harts are created
- use create_unimplemented_device() to create the GEM management
  block instead of sifive_mmio_emulate()
- add "phy-handle" property to the ethernet node

Bin Meng (28):
  riscv: hw: Remove superfluous "linux,phandle" property
  riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell
  riscv: hw: Remove not needed PLIC properties in device tree
  riscv: hw: Change create_fdt() to return void
  riscv: roms: Remove executable attribute of opensbi images
  riscv: sifive_u: Remove the unnecessary include of prci header
  riscv: sifive: Rename sifive_prci.{c,h} to sifive_e_prci.{c,h}
  riscv: sifive_e: prci: Fix a typo of hfxosccfg register programming
  riscv: sifive_e: prci: Update the PRCI register block size
  riscv: sifive_e: Drop sifive_mmio_emulate()
  riscv: Add a sifive_cpu.h to include both E and U cpu type defines
  riscv: hart: Extract hart realize to a separate routine
  riscv: hart: Add a "hartid-base" property to RISC-V hart array
  riscv: sifive_u: Update hart configuration to reflect the real FU540
    SoC
  riscv: sifive_u: Set the minimum number of cpus to 2
  riscv: sifive_u: Update PLIC hart topology configuration string
  riscv: sifive: Implement PRCI model for FU540
  riscv: sifive_u: Generate hfclk and rtcclk nodes
  riscv: sifive_u: Add PRCI block to the SoC
  riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes
  riscv: sifive_u: Update UART base addresses and IRQs
  riscv: sifive_u: Change UART node name in device tree
  riscv: roms: Update default bios for sifive_u machine
  riscv: sifive: Implement a model for SiFive FU540 OTP
  riscv: sifive_u: Instantiate OTP memory with a serial number
  riscv: sifive_u: Fix broken GEM support
  riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet
  riscv: sifive_u: Update model and compatible strings in device tree

 hw/riscv/Makefile.objs                       |   4 +-
 hw/riscv/riscv_hart.c                        |  35 ++--
 hw/riscv/sifive_e.c                          |  27 ++-
 hw/riscv/{sifive_prci.c => sifive_e_prci.c}  |  79 +++++----
 hw/riscv/sifive_u.c                          | 252 ++++++++++++++++++---------
 hw/riscv/sifive_u_otp.c                      | 194 +++++++++++++++++++++
 hw/riscv/sifive_u_prci.c                     | 165 ++++++++++++++++++
 hw/riscv/spike.c                             |   1 -
 hw/riscv/virt.c                              |  40 ++---
 include/hw/riscv/riscv_hart.h                |   1 +
 include/hw/riscv/sifive_cpu.h                |  31 ++++
 include/hw/riscv/sifive_e.h                  |   7 +-
 include/hw/riscv/sifive_e_prci.h             |  71 ++++++++
 include/hw/riscv/sifive_prci.h               |  69 --------
 include/hw/riscv/sifive_u.h                  |  27 +--
 include/hw/riscv/sifive_u_otp.h              |  90 ++++++++++
 include/hw/riscv/sifive_u_prci.h             | 100 +++++++++++
 pc-bios/opensbi-riscv32-virt-fw_jump.bin     | Bin
 pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin | Bin 40968 -> 45064 bytes
 pc-bios/opensbi-riscv64-virt-fw_jump.bin     | Bin
 roms/Makefile                                |   4 +-
 21 files changed, 929 insertions(+), 268 deletions(-)
 rename hw/riscv/{sifive_prci.c => sifive_e_prci.c} (50%)
 create mode 100644 hw/riscv/sifive_u_otp.c
 create mode 100644 hw/riscv/sifive_u_prci.c
 create mode 100644 include/hw/riscv/sifive_cpu.h
 create mode 100644 include/hw/riscv/sifive_e_prci.h
 delete mode 100644 include/hw/riscv/sifive_prci.h
 create mode 100644 include/hw/riscv/sifive_u_otp.h
 create mode 100644 include/hw/riscv/sifive_u_prci.h
 mode change 100755 => 100644 pc-bios/opensbi-riscv32-virt-fw_jump.bin
 mode change 100755 => 100644 pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin
 mode change 100755 => 100644 pc-bios/opensbi-riscv64-virt-fw_jump.bin

-- 
2.7.4



^ permalink raw reply	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 01/28] riscv: hw: Remove superfluous "linux, phandle" property
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 02/28] riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Bin Meng
                   ` (25 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

"linux,phandle" property is optional. Remove all instances in the
sifive_u, virt and spike machine device trees.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

---

Changes in v4:
- remove 2 more "linux,phandle" instances in sifive_u.c and spike.c
  after rebasing on Palmer's QEMU RISC-V tree

Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c | 4 ----
 hw/riscv/spike.c    | 1 -
 hw/riscv/virt.c     | 3 ---
 3 files changed, 8 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 64e233d..afe304f 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -126,7 +126,6 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
         qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu");
         qemu_fdt_add_subnode(fdt, intc);
         qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle);
-        qemu_fdt_setprop_cell(fdt, intc, "linux,phandle", cpu_phandle);
         qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc");
         qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
         qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1);
@@ -185,7 +184,6 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cell(fdt, nodename, "riscv,max-priority", 7);
     qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", 0x35);
     qemu_fdt_setprop_cells(fdt, nodename, "phandle", plic_phandle);
-    qemu_fdt_setprop_cells(fdt, nodename, "linux,phandle", plic_phandle);
     plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
     g_free(cells);
     g_free(nodename);
@@ -198,7 +196,6 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
         SIFIVE_U_GEM_CLOCK_FREQ);
     qemu_fdt_setprop_cell(fdt, nodename, "phandle", ethclk_phandle);
-    qemu_fdt_setprop_cell(fdt, nodename, "linux,phandle", ethclk_phandle);
     ethclk_phandle = qemu_fdt_get_phandle(fdt, nodename);
     g_free(nodename);
 
@@ -234,7 +231,6 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
     qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 3686400);
     qemu_fdt_setprop_cell(fdt, nodename, "phandle", uartclk_phandle);
-    qemu_fdt_setprop_cell(fdt, nodename, "linux,phandle", uartclk_phandle);
     uartclk_phandle = qemu_fdt_get_phandle(fdt, nodename);
     g_free(nodename);
 
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index 2991b34..14acaef 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -112,7 +112,6 @@ static void create_fdt(SpikeState *s, const struct MemmapEntry *memmap,
         qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu");
         qemu_fdt_add_subnode(fdt, intc);
         qemu_fdt_setprop_cell(fdt, intc, "phandle", 1);
-        qemu_fdt_setprop_cell(fdt, intc, "linux,phandle", 1);
         qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc");
         qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
         qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1);
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 25faf3b..00be05a 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -170,11 +170,9 @@ static void *create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
         qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu);
         qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu");
         qemu_fdt_setprop_cell(fdt, nodename, "phandle", cpu_phandle);
-        qemu_fdt_setprop_cell(fdt, nodename, "linux,phandle", cpu_phandle);
         intc_phandle = phandle++;
         qemu_fdt_add_subnode(fdt, intc);
         qemu_fdt_setprop_cell(fdt, intc, "phandle", intc_phandle);
-        qemu_fdt_setprop_cell(fdt, intc, "linux,phandle", intc_phandle);
         qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc");
         qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
         qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1);
@@ -250,7 +248,6 @@ static void *create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cell(fdt, nodename, "riscv,max-priority", 7);
     qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", VIRTIO_NDEV);
     qemu_fdt_setprop_cells(fdt, nodename, "phandle", plic_phandle);
-    qemu_fdt_setprop_cells(fdt, nodename, "linux,phandle", plic_phandle);
     plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
     g_free(cells);
     g_free(nodename);
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 02/28] riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 01/28] riscv: hw: Remove superfluous "linux, phandle" property Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 03/28] riscv: hw: Remove not needed PLIC properties in device tree Bin Meng
                   ` (24 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

Some of the properties only have 1 cell so we should use
qemu_fdt_setprop_cell() instead of qemu_fdt_setprop_cells().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c | 18 +++++++++---------
 hw/riscv/virt.c     | 24 ++++++++++++------------
 2 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index afe304f..3f9284e 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -183,7 +183,7 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
     qemu_fdt_setprop_cell(fdt, nodename, "riscv,max-priority", 7);
     qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", 0x35);
-    qemu_fdt_setprop_cells(fdt, nodename, "phandle", plic_phandle);
+    qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle);
     plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
     g_free(cells);
     g_free(nodename);
@@ -208,20 +208,20 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
         0x0, memmap[SIFIVE_U_GEM].size);
     qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
     qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii");
-    qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle);
-    qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
+    qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
+    qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
         ethclk_phandle, ethclk_phandle, ethclk_phandle);
     qemu_fdt_setprop(fdt, nodename, "clock-names", ethclk_names,
         sizeof(ethclk_names));
-    qemu_fdt_setprop_cells(fdt, nodename, "#address-cells", 1);
-    qemu_fdt_setprop_cells(fdt, nodename, "#size-cells", 0);
+    qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
+    qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
     g_free(nodename);
 
     nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0",
         (long)memmap[SIFIVE_U_GEM].base);
     qemu_fdt_add_subnode(fdt, nodename);
-    qemu_fdt_setprop_cells(fdt, nodename, "reg", 0x0);
+    qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
     g_free(nodename);
 
     uartclk_phandle = phandle++;
@@ -241,9 +241,9 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cells(fdt, nodename, "reg",
         0x0, memmap[SIFIVE_U_UART0].base,
         0x0, memmap[SIFIVE_U_UART0].size);
-    qemu_fdt_setprop_cells(fdt, nodename, "clocks", uartclk_phandle);
-    qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle);
-    qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ);
+    qemu_fdt_setprop_cell(fdt, nodename, "clocks", uartclk_phandle);
+    qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
+    qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ);
 
     qemu_fdt_add_subnode(fdt, "/chosen");
     qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename);
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 00be05a..127f005 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -233,8 +233,8 @@ static void *create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
     nodename = g_strdup_printf("/soc/interrupt-controller@%lx",
         (long)memmap[VIRT_PLIC].base);
     qemu_fdt_add_subnode(fdt, nodename);
-    qemu_fdt_setprop_cells(fdt, nodename, "#address-cells",
-                           FDT_PLIC_ADDR_CELLS);
+    qemu_fdt_setprop_cell(fdt, nodename, "#address-cells",
+                          FDT_PLIC_ADDR_CELLS);
     qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells",
                           FDT_PLIC_INT_CELLS);
     qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0");
@@ -247,7 +247,7 @@ static void *create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
     qemu_fdt_setprop_cell(fdt, nodename, "riscv,max-priority", 7);
     qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", VIRTIO_NDEV);
-    qemu_fdt_setprop_cells(fdt, nodename, "phandle", plic_phandle);
+    qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle);
     plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
     g_free(cells);
     g_free(nodename);
@@ -260,19 +260,19 @@ static void *create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
         qemu_fdt_setprop_cells(fdt, nodename, "reg",
             0x0, memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size,
             0x0, memmap[VIRT_VIRTIO].size);
-        qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle);
-        qemu_fdt_setprop_cells(fdt, nodename, "interrupts", VIRTIO_IRQ + i);
+        qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
+        qemu_fdt_setprop_cell(fdt, nodename, "interrupts", VIRTIO_IRQ + i);
         g_free(nodename);
     }
 
     nodename = g_strdup_printf("/soc/pci@%lx",
         (long) memmap[VIRT_PCIE_ECAM].base);
     qemu_fdt_add_subnode(fdt, nodename);
-    qemu_fdt_setprop_cells(fdt, nodename, "#address-cells",
-                           FDT_PCI_ADDR_CELLS);
-    qemu_fdt_setprop_cells(fdt, nodename, "#interrupt-cells",
-                           FDT_PCI_INT_CELLS);
-    qemu_fdt_setprop_cells(fdt, nodename, "#size-cells", 0x2);
+    qemu_fdt_setprop_cell(fdt, nodename, "#address-cells",
+                          FDT_PCI_ADDR_CELLS);
+    qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells",
+                          FDT_PCI_INT_CELLS);
+    qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0x2);
     qemu_fdt_setprop_string(fdt, nodename, "compatible",
                             "pci-host-ecam-generic");
     qemu_fdt_setprop_string(fdt, nodename, "device_type", "pci");
@@ -309,8 +309,8 @@ static void *create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
         0x0, memmap[VIRT_UART0].base,
         0x0, memmap[VIRT_UART0].size);
     qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 3686400);
-        qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle);
-        qemu_fdt_setprop_cells(fdt, nodename, "interrupts", UART0_IRQ);
+    qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
+    qemu_fdt_setprop_cell(fdt, nodename, "interrupts", UART0_IRQ);
 
     qemu_fdt_add_subnode(fdt, "/chosen");
     qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename);
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 03/28] riscv: hw: Remove not needed PLIC properties in device tree
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 01/28] riscv: hw: Remove superfluous "linux, phandle" property Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 02/28] riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 04/28] riscv: hw: Change create_fdt() to return void Bin Meng
                   ` (23 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

This removes "reg-names" and "riscv,max-priority" properties of the
PLIC node from device tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jonathan Behrens <fintelia@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

---

Changes in v4: None
Changes in v3: None
Changes in v2:
- keep the PLIC compatible string unchanged as OpenSBI uses that
  for DT fix up

 hw/riscv/sifive_u.c | 2 --
 hw/riscv/virt.c     | 2 --
 2 files changed, 4 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 3f9284e..5fe0033 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -180,8 +180,6 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cells(fdt, nodename, "reg",
         0x0, memmap[SIFIVE_U_PLIC].base,
         0x0, memmap[SIFIVE_U_PLIC].size);
-    qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
-    qemu_fdt_setprop_cell(fdt, nodename, "riscv,max-priority", 7);
     qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", 0x35);
     qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle);
     plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 127f005..2f75195 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -244,8 +244,6 @@ static void *create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cells(fdt, nodename, "reg",
         0x0, memmap[VIRT_PLIC].base,
         0x0, memmap[VIRT_PLIC].size);
-    qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
-    qemu_fdt_setprop_cell(fdt, nodename, "riscv,max-priority", 7);
     qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", VIRTIO_NDEV);
     qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle);
     plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 04/28] riscv: hw: Change create_fdt() to return void
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (2 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 03/28] riscv: hw: Remove not needed PLIC properties in device tree Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 05/28] riscv: roms: Remove executable attribute of opensbi images Bin Meng
                   ` (22 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

There is no need to return fdt at the end of create_fdt() because
it's already saved in s->fdt.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

---

Changes in v4:
- change create_fdt() to return void in sifive_u.c too, after rebasing
  on Palmer's QEMU RISC-V tree

Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c | 11 ++++-------
 hw/riscv/virt.c     | 11 ++++-------
 2 files changed, 8 insertions(+), 14 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 5fe0033..e22803b 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -67,7 +67,7 @@ static const struct MemmapEntry {
 
 #define GEM_REVISION        0x10070109
 
-static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
+static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     uint64_t mem_size, const char *cmdline)
 {
     void *fdt;
@@ -253,14 +253,11 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename);
 
     g_free(nodename);
-
-    return fdt;
 }
 
 static void riscv_sifive_u_init(MachineState *machine)
 {
     const struct MemmapEntry *memmap = sifive_u_memmap;
-    void *fdt;
 
     SiFiveUState *s = g_new0(SiFiveUState, 1);
     MemoryRegion *system_memory = get_system_memory();
@@ -281,7 +278,7 @@ static void riscv_sifive_u_init(MachineState *machine)
                                 main_mem);
 
     /* create device tree */
-    fdt = create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
+    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
 
     riscv_find_and_load_firmware(machine, BIOS_FILENAME,
                                  memmap[SIFIVE_U_DRAM].base);
@@ -294,9 +291,9 @@ static void riscv_sifive_u_init(MachineState *machine)
             hwaddr end = riscv_load_initrd(machine->initrd_filename,
                                            machine->ram_size, kernel_entry,
                                            &start);
-            qemu_fdt_setprop_cell(fdt, "/chosen",
+            qemu_fdt_setprop_cell(s->fdt, "/chosen",
                                   "linux,initrd-start", start);
-            qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
+            qemu_fdt_setprop_cell(s->fdt, "/chosen", "linux,initrd-end",
                                   end);
         }
     }
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 2f75195..6bfa721 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -112,7 +112,7 @@ static void create_pcie_irq_map(void *fdt, char *nodename,
                            0x1800, 0, 0, 0x7);
 }
 
-static void *create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
+static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
     uint64_t mem_size, const char *cmdline)
 {
     void *fdt;
@@ -316,8 +316,6 @@ static void *create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
         qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline);
     }
     g_free(nodename);
-
-    return fdt;
 }
 
 
@@ -373,7 +371,6 @@ static void riscv_virt_board_init(MachineState *machine)
     size_t plic_hart_config_len;
     int i;
     unsigned int smp_cpus = machine->smp.cpus;
-    void *fdt;
 
     /* Initialize SOC */
     object_initialize_child(OBJECT(machine), "soc", &s->soc, sizeof(s->soc),
@@ -392,7 +389,7 @@ static void riscv_virt_board_init(MachineState *machine)
         main_mem);
 
     /* create device tree */
-    fdt = create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
+    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
 
     /* boot rom */
     memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom",
@@ -411,9 +408,9 @@ static void riscv_virt_board_init(MachineState *machine)
             hwaddr end = riscv_load_initrd(machine->initrd_filename,
                                            machine->ram_size, kernel_entry,
                                            &start);
-            qemu_fdt_setprop_cell(fdt, "/chosen",
+            qemu_fdt_setprop_cell(s->fdt, "/chosen",
                                   "linux,initrd-start", start);
-            qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
+            qemu_fdt_setprop_cell(s->fdt, "/chosen", "linux,initrd-end",
                                   end);
         }
     }
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 05/28] riscv: roms: Remove executable attribute of opensbi images
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (3 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 04/28] riscv: hw: Change create_fdt() to return void Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19 20:08   ` Alistair Francis
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 06/28] riscv: sifive_u: Remove the unnecessary include of prci header Bin Meng
                   ` (21 subsequent siblings)
  26 siblings, 1 reply; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

Like other binary files, the executable attribute of opensbi images
should not be set.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

---

Changes in v4:
- new patch to remove executable attribute of opensbi images

Changes in v3: None
Changes in v2: None

 pc-bios/opensbi-riscv32-virt-fw_jump.bin     | Bin
 pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin | Bin
 pc-bios/opensbi-riscv64-virt-fw_jump.bin     | Bin
 3 files changed, 0 insertions(+), 0 deletions(-)
 mode change 100755 => 100644 pc-bios/opensbi-riscv32-virt-fw_jump.bin
 mode change 100755 => 100644 pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin
 mode change 100755 => 100644 pc-bios/opensbi-riscv64-virt-fw_jump.bin

diff --git a/pc-bios/opensbi-riscv32-virt-fw_jump.bin b/pc-bios/opensbi-riscv32-virt-fw_jump.bin
old mode 100755
new mode 100644
diff --git a/pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin b/pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin
old mode 100755
new mode 100644
diff --git a/pc-bios/opensbi-riscv64-virt-fw_jump.bin b/pc-bios/opensbi-riscv64-virt-fw_jump.bin
old mode 100755
new mode 100644
-- 
2.7.4



^ permalink raw reply	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 06/28] riscv: sifive_u: Remove the unnecessary include of prci header
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (4 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 05/28] riscv: roms: Remove executable attribute of opensbi images Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 07/28] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h} Bin Meng
                   ` (20 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

sifive_u machine does not use PRCI as of today. Remove the prci
header inclusion.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index e22803b..3f58f61 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -39,7 +39,6 @@
 #include "hw/riscv/sifive_plic.h"
 #include "hw/riscv/sifive_clint.h"
 #include "hw/riscv/sifive_uart.h"
-#include "hw/riscv/sifive_prci.h"
 #include "hw/riscv/sifive_u.h"
 #include "hw/riscv/boot.h"
 #include "chardev/char.h"
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 07/28] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h}
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (5 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 06/28] riscv: sifive_u: Remove the unnecessary include of prci header Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 08/28] riscv: sifive_e: prci: Fix a typo of hfxosccfg register programming Bin Meng
                   ` (19 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

Current SiFive PRCI model only works with sifive_e machine, as it
only emulates registers or PRCI block in the FE310 SoC.

Rename the file name to make it clear that it is for sifive_e.
This also prefix "sifive_e"/"SIFIVE_E" for all macros, variables
and functions.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>

---

Changes in v4:
- prefix all macros/variables/functions with SIFIVE_E/sifive_e
  in the sifive_e_prci driver

Changes in v3: None
Changes in v2: None

 hw/riscv/Makefile.objs                      |  2 +-
 hw/riscv/sifive_e.c                         |  4 +-
 hw/riscv/{sifive_prci.c => sifive_e_prci.c} | 79 ++++++++++++++---------------
 include/hw/riscv/sifive_e_prci.h            | 69 +++++++++++++++++++++++++
 include/hw/riscv/sifive_prci.h              | 69 -------------------------
 5 files changed, 111 insertions(+), 112 deletions(-)
 rename hw/riscv/{sifive_prci.c => sifive_e_prci.c} (50%)
 create mode 100644 include/hw/riscv/sifive_e_prci.h
 delete mode 100644 include/hw/riscv/sifive_prci.h

diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs
index eb9d4f9..c859697 100644
--- a/hw/riscv/Makefile.objs
+++ b/hw/riscv/Makefile.objs
@@ -2,9 +2,9 @@ obj-y += boot.o
 obj-$(CONFIG_SPIKE) += riscv_htif.o
 obj-$(CONFIG_HART) += riscv_hart.o
 obj-$(CONFIG_SIFIVE_E) += sifive_e.o
+obj-$(CONFIG_SIFIVE_E) += sifive_e_prci.o
 obj-$(CONFIG_SIFIVE) += sifive_clint.o
 obj-$(CONFIG_SIFIVE) += sifive_gpio.o
-obj-$(CONFIG_SIFIVE) += sifive_prci.o
 obj-$(CONFIG_SIFIVE) += sifive_plic.o
 obj-$(CONFIG_SIFIVE) += sifive_test.o
 obj-$(CONFIG_SIFIVE_U) += sifive_u.o
diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
index 2a499d8..2d67670 100644
--- a/hw/riscv/sifive_e.c
+++ b/hw/riscv/sifive_e.c
@@ -41,9 +41,9 @@
 #include "hw/riscv/riscv_hart.h"
 #include "hw/riscv/sifive_plic.h"
 #include "hw/riscv/sifive_clint.h"
-#include "hw/riscv/sifive_prci.h"
 #include "hw/riscv/sifive_uart.h"
 #include "hw/riscv/sifive_e.h"
+#include "hw/riscv/sifive_e_prci.h"
 #include "hw/riscv/boot.h"
 #include "chardev/char.h"
 #include "sysemu/arch_init.h"
@@ -174,7 +174,7 @@ static void riscv_sifive_e_soc_realize(DeviceState *dev, Error **errp)
         SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE);
     sifive_mmio_emulate(sys_mem, "riscv.sifive.e.aon",
         memmap[SIFIVE_E_AON].base, memmap[SIFIVE_E_AON].size);
-    sifive_prci_create(memmap[SIFIVE_E_PRCI].base);
+    sifive_e_prci_create(memmap[SIFIVE_E_PRCI].base);
 
     /* GPIO */
 
diff --git a/hw/riscv/sifive_prci.c b/hw/riscv/sifive_e_prci.c
similarity index 50%
rename from hw/riscv/sifive_prci.c
rename to hw/riscv/sifive_e_prci.c
index f406682..e87a3ce 100644
--- a/hw/riscv/sifive_prci.c
+++ b/hw/riscv/sifive_e_prci.c
@@ -1,5 +1,5 @@
 /*
- * QEMU SiFive PRCI (Power, Reset, Clock, Interrupt)
+ * QEMU SiFive E PRCI (Power, Reset, Clock, Interrupt)
  *
  * Copyright (c) 2017 SiFive, Inc.
  *
@@ -22,46 +22,46 @@
 #include "hw/sysbus.h"
 #include "qemu/module.h"
 #include "target/riscv/cpu.h"
-#include "hw/riscv/sifive_prci.h"
+#include "hw/riscv/sifive_e_prci.h"
 
-static uint64_t sifive_prci_read(void *opaque, hwaddr addr, unsigned int size)
+static uint64_t sifive_e_prci_read(void *opaque, hwaddr addr, unsigned int size)
 {
-    SiFivePRCIState *s = opaque;
+    SiFiveEPRCIState *s = opaque;
     switch (addr) {
-    case SIFIVE_PRCI_HFROSCCFG:
+    case SIFIVE_E_PRCI_HFROSCCFG:
         return s->hfrosccfg;
-    case SIFIVE_PRCI_HFXOSCCFG:
+    case SIFIVE_E_PRCI_HFXOSCCFG:
         return s->hfxosccfg;
-    case SIFIVE_PRCI_PLLCFG:
+    case SIFIVE_E_PRCI_PLLCFG:
         return s->pllcfg;
-    case SIFIVE_PRCI_PLLOUTDIV:
+    case SIFIVE_E_PRCI_PLLOUTDIV:
         return s->plloutdiv;
     }
     hw_error("%s: read: addr=0x%x\n", __func__, (int)addr);
     return 0;
 }
 
-static void sifive_prci_write(void *opaque, hwaddr addr,
-           uint64_t val64, unsigned int size)
+static void sifive_e_prci_write(void *opaque, hwaddr addr,
+                                uint64_t val64, unsigned int size)
 {
-    SiFivePRCIState *s = opaque;
+    SiFiveEPRCIState *s = opaque;
     switch (addr) {
-    case SIFIVE_PRCI_HFROSCCFG:
+    case SIFIVE_E_PRCI_HFROSCCFG:
         s->hfrosccfg = (uint32_t) val64;
         /* OSC stays ready */
-        s->hfrosccfg |= SIFIVE_PRCI_HFROSCCFG_RDY;
+        s->hfrosccfg |= SIFIVE_E_PRCI_HFROSCCFG_RDY;
         break;
-    case SIFIVE_PRCI_HFXOSCCFG:
+    case SIFIVE_E_PRCI_HFXOSCCFG:
         s->hfxosccfg = (uint32_t) val64;
         /* OSC stays ready */
-        s->hfxosccfg |= SIFIVE_PRCI_HFXOSCCFG_RDY;
+        s->hfxosccfg |= SIFIVE_E_PRCI_HFXOSCCFG_RDY;
         break;
-    case SIFIVE_PRCI_PLLCFG:
+    case SIFIVE_E_PRCI_PLLCFG:
         s->pllcfg = (uint32_t) val64;
         /* PLL stays locked */
-        s->pllcfg |= SIFIVE_PRCI_PLLCFG_LOCK;
+        s->pllcfg |= SIFIVE_E_PRCI_PLLCFG_LOCK;
         break;
-    case SIFIVE_PRCI_PLLOUTDIV:
+    case SIFIVE_E_PRCI_PLLOUTDIV:
         s->plloutdiv = (uint32_t) val64;
         break;
     default:
@@ -70,9 +70,9 @@ static void sifive_prci_write(void *opaque, hwaddr addr,
     }
 }
 
-static const MemoryRegionOps sifive_prci_ops = {
-    .read = sifive_prci_read,
-    .write = sifive_prci_write,
+static const MemoryRegionOps sifive_e_prci_ops = {
+    .read = sifive_e_prci_read,
+    .write = sifive_e_prci_write,
     .endianness = DEVICE_NATIVE_ENDIAN,
     .valid = {
         .min_access_size = 4,
@@ -80,43 +80,42 @@ static const MemoryRegionOps sifive_prci_ops = {
     }
 };
 
-static void sifive_prci_init(Object *obj)
+static void sifive_e_prci_init(Object *obj)
 {
-    SiFivePRCIState *s = SIFIVE_PRCI(obj);
+    SiFiveEPRCIState *s = SIFIVE_E_PRCI(obj);
 
-    memory_region_init_io(&s->mmio, obj, &sifive_prci_ops, s,
-                          TYPE_SIFIVE_PRCI, 0x8000);
+    memory_region_init_io(&s->mmio, obj, &sifive_e_prci_ops, s,
+                          TYPE_SIFIVE_E_PRCI, 0x8000);
     sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
 
-    s->hfrosccfg = (SIFIVE_PRCI_HFROSCCFG_RDY | SIFIVE_PRCI_HFROSCCFG_EN);
-    s->hfxosccfg = (SIFIVE_PRCI_HFROSCCFG_RDY | SIFIVE_PRCI_HFROSCCFG_EN);
-    s->pllcfg = (SIFIVE_PRCI_PLLCFG_REFSEL | SIFIVE_PRCI_PLLCFG_BYPASS |
-                SIFIVE_PRCI_PLLCFG_LOCK);
-    s->plloutdiv = SIFIVE_PRCI_PLLOUTDIV_DIV1;
-
+    s->hfrosccfg = (SIFIVE_E_PRCI_HFROSCCFG_RDY | SIFIVE_E_PRCI_HFROSCCFG_EN);
+    s->hfxosccfg = (SIFIVE_E_PRCI_HFROSCCFG_RDY | SIFIVE_E_PRCI_HFROSCCFG_EN);
+    s->pllcfg = (SIFIVE_E_PRCI_PLLCFG_REFSEL | SIFIVE_E_PRCI_PLLCFG_BYPASS |
+                 SIFIVE_E_PRCI_PLLCFG_LOCK);
+    s->plloutdiv = SIFIVE_E_PRCI_PLLOUTDIV_DIV1;
 }
 
-static const TypeInfo sifive_prci_info = {
-    .name          = TYPE_SIFIVE_PRCI,
+static const TypeInfo sifive_e_prci_info = {
+    .name          = TYPE_SIFIVE_E_PRCI,
     .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(SiFivePRCIState),
-    .instance_init = sifive_prci_init,
+    .instance_size = sizeof(SiFiveEPRCIState),
+    .instance_init = sifive_e_prci_init,
 };
 
-static void sifive_prci_register_types(void)
+static void sifive_e_prci_register_types(void)
 {
-    type_register_static(&sifive_prci_info);
+    type_register_static(&sifive_e_prci_info);
 }
 
-type_init(sifive_prci_register_types)
+type_init(sifive_e_prci_register_types)
 
 
 /*
  * Create PRCI device.
  */
-DeviceState *sifive_prci_create(hwaddr addr)
+DeviceState *sifive_e_prci_create(hwaddr addr)
 {
-    DeviceState *dev = qdev_create(NULL, TYPE_SIFIVE_PRCI);
+    DeviceState *dev = qdev_create(NULL, TYPE_SIFIVE_E_PRCI);
     qdev_init_nofail(dev);
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
     return dev;
diff --git a/include/hw/riscv/sifive_e_prci.h b/include/hw/riscv/sifive_e_prci.h
new file mode 100644
index 0000000..c4b76aa
--- /dev/null
+++ b/include/hw/riscv/sifive_e_prci.h
@@ -0,0 +1,69 @@
+/*
+ * QEMU SiFive E PRCI (Power, Reset, Clock, Interrupt) interface
+ *
+ * Copyright (c) 2017 SiFive, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_SIFIVE_E_PRCI_H
+#define HW_SIFIVE_E_PRCI_H
+
+enum {
+    SIFIVE_E_PRCI_HFROSCCFG = 0x0,
+    SIFIVE_E_PRCI_HFXOSCCFG = 0x4,
+    SIFIVE_E_PRCI_PLLCFG    = 0x8,
+    SIFIVE_E_PRCI_PLLOUTDIV = 0xC
+};
+
+enum {
+    SIFIVE_E_PRCI_HFROSCCFG_RDY = (1 << 31),
+    SIFIVE_E_PRCI_HFROSCCFG_EN  = (1 << 30)
+};
+
+enum {
+    SIFIVE_E_PRCI_HFXOSCCFG_RDY = (1 << 31),
+    SIFIVE_E_PRCI_HFXOSCCFG_EN  = (1 << 30)
+};
+
+enum {
+    SIFIVE_E_PRCI_PLLCFG_PLLSEL = (1 << 16),
+    SIFIVE_E_PRCI_PLLCFG_REFSEL = (1 << 17),
+    SIFIVE_E_PRCI_PLLCFG_BYPASS = (1 << 18),
+    SIFIVE_E_PRCI_PLLCFG_LOCK   = (1 << 31)
+};
+
+enum {
+    SIFIVE_E_PRCI_PLLOUTDIV_DIV1 = (1 << 8)
+};
+
+#define TYPE_SIFIVE_E_PRCI      "riscv.sifive.e.prci"
+
+#define SIFIVE_E_PRCI(obj) \
+    OBJECT_CHECK(SiFiveEPRCIState, (obj), TYPE_SIFIVE_E_PRCI)
+
+typedef struct SiFiveEPRCIState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion mmio;
+    uint32_t hfrosccfg;
+    uint32_t hfxosccfg;
+    uint32_t pllcfg;
+    uint32_t plloutdiv;
+} SiFiveEPRCIState;
+
+DeviceState *sifive_e_prci_create(hwaddr addr);
+
+#endif
diff --git a/include/hw/riscv/sifive_prci.h b/include/hw/riscv/sifive_prci.h
deleted file mode 100644
index bd51c4a..0000000
--- a/include/hw/riscv/sifive_prci.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * QEMU SiFive PRCI (Power, Reset, Clock, Interrupt) interface
- *
- * Copyright (c) 2017 SiFive, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2 or later, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef HW_SIFIVE_PRCI_H
-#define HW_SIFIVE_PRCI_H
-
-enum {
-    SIFIVE_PRCI_HFROSCCFG   = 0x0,
-    SIFIVE_PRCI_HFXOSCCFG   = 0x4,
-    SIFIVE_PRCI_PLLCFG      = 0x8,
-    SIFIVE_PRCI_PLLOUTDIV   = 0xC
-};
-
-enum {
-    SIFIVE_PRCI_HFROSCCFG_RDY   = (1 << 31),
-    SIFIVE_PRCI_HFROSCCFG_EN    = (1 << 30)
-};
-
-enum {
-    SIFIVE_PRCI_HFXOSCCFG_RDY   = (1 << 31),
-    SIFIVE_PRCI_HFXOSCCFG_EN    = (1 << 30)
-};
-
-enum {
-    SIFIVE_PRCI_PLLCFG_PLLSEL   = (1 << 16),
-    SIFIVE_PRCI_PLLCFG_REFSEL   = (1 << 17),
-    SIFIVE_PRCI_PLLCFG_BYPASS   = (1 << 18),
-    SIFIVE_PRCI_PLLCFG_LOCK     = (1 << 31)
-};
-
-enum {
-    SIFIVE_PRCI_PLLOUTDIV_DIV1  = (1 << 8)
-};
-
-#define TYPE_SIFIVE_PRCI "riscv.sifive.prci"
-
-#define SIFIVE_PRCI(obj) \
-    OBJECT_CHECK(SiFivePRCIState, (obj), TYPE_SIFIVE_PRCI)
-
-typedef struct SiFivePRCIState {
-    /*< private >*/
-    SysBusDevice parent_obj;
-
-    /*< public >*/
-    MemoryRegion mmio;
-    uint32_t hfrosccfg;
-    uint32_t hfxosccfg;
-    uint32_t pllcfg;
-    uint32_t plloutdiv;
-} SiFivePRCIState;
-
-DeviceState *sifive_prci_create(hwaddr addr);
-
-#endif
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 08/28] riscv: sifive_e: prci: Fix a typo of hfxosccfg register programming
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (6 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 07/28] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h} Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 09/28] riscv: sifive_e: prci: Update the PRCI register block size Bin Meng
                   ` (18 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

For hfxosccfg register programming, SIFIVE_E_PRCI_HFXOSCCFG_RDY and
SIFIVE_E_PRCI_HFXOSCCFG_EN should be used.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_e_prci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/riscv/sifive_e_prci.c b/hw/riscv/sifive_e_prci.c
index e87a3ce..603a54b 100644
--- a/hw/riscv/sifive_e_prci.c
+++ b/hw/riscv/sifive_e_prci.c
@@ -89,7 +89,7 @@ static void sifive_e_prci_init(Object *obj)
     sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
 
     s->hfrosccfg = (SIFIVE_E_PRCI_HFROSCCFG_RDY | SIFIVE_E_PRCI_HFROSCCFG_EN);
-    s->hfxosccfg = (SIFIVE_E_PRCI_HFROSCCFG_RDY | SIFIVE_E_PRCI_HFROSCCFG_EN);
+    s->hfxosccfg = (SIFIVE_E_PRCI_HFXOSCCFG_RDY | SIFIVE_E_PRCI_HFXOSCCFG_EN);
     s->pllcfg = (SIFIVE_E_PRCI_PLLCFG_REFSEL | SIFIVE_E_PRCI_PLLCFG_BYPASS |
                  SIFIVE_E_PRCI_PLLCFG_LOCK);
     s->plloutdiv = SIFIVE_E_PRCI_PLLOUTDIV_DIV1;
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 09/28] riscv: sifive_e: prci: Update the PRCI register block size
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (7 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 08/28] riscv: sifive_e: prci: Fix a typo of hfxosccfg register programming Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 11/28] riscv: Add a sifive_cpu.h to include both E and U cpu type defines Bin Meng
                   ` (17 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

Currently the PRCI register block size is set to 0x8000, but in fact
0x1000 is enough, which is also what the manual says.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_e_prci.c         | 2 +-
 include/hw/riscv/sifive_e_prci.h | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/hw/riscv/sifive_e_prci.c b/hw/riscv/sifive_e_prci.c
index 603a54b..3afcb84 100644
--- a/hw/riscv/sifive_e_prci.c
+++ b/hw/riscv/sifive_e_prci.c
@@ -85,7 +85,7 @@ static void sifive_e_prci_init(Object *obj)
     SiFiveEPRCIState *s = SIFIVE_E_PRCI(obj);
 
     memory_region_init_io(&s->mmio, obj, &sifive_e_prci_ops, s,
-                          TYPE_SIFIVE_E_PRCI, 0x8000);
+                          TYPE_SIFIVE_E_PRCI, SIFIVE_E_PRCI_REG_SIZE);
     sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
 
     s->hfrosccfg = (SIFIVE_E_PRCI_HFROSCCFG_RDY | SIFIVE_E_PRCI_HFROSCCFG_EN);
diff --git a/include/hw/riscv/sifive_e_prci.h b/include/hw/riscv/sifive_e_prci.h
index c4b76aa..698b0b4 100644
--- a/include/hw/riscv/sifive_e_prci.h
+++ b/include/hw/riscv/sifive_e_prci.h
@@ -47,6 +47,8 @@ enum {
     SIFIVE_E_PRCI_PLLOUTDIV_DIV1 = (1 << 8)
 };
 
+#define SIFIVE_E_PRCI_REG_SIZE  0x1000
+
 #define TYPE_SIFIVE_E_PRCI      "riscv.sifive.e.prci"
 
 #define SIFIVE_E_PRCI(obj) \
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 11/28] riscv: Add a sifive_cpu.h to include both E and U cpu type defines
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (8 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 09/28] riscv: sifive_e: prci: Update the PRCI register block size Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 12/28] riscv: hart: Extract hart realize to a separate routine Bin Meng
                   ` (16 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

Group SiFive E and U cpu type defines into one header file.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 include/hw/riscv/sifive_cpu.h | 31 +++++++++++++++++++++++++++++++
 include/hw/riscv/sifive_e.h   |  7 +------
 include/hw/riscv/sifive_u.h   |  7 +------
 3 files changed, 33 insertions(+), 12 deletions(-)
 create mode 100644 include/hw/riscv/sifive_cpu.h

diff --git a/include/hw/riscv/sifive_cpu.h b/include/hw/riscv/sifive_cpu.h
new file mode 100644
index 0000000..1367996
--- /dev/null
+++ b/include/hw/riscv/sifive_cpu.h
@@ -0,0 +1,31 @@
+/*
+ * SiFive CPU types
+ *
+ * Copyright (c) 2017 SiFive, Inc.
+ * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_SIFIVE_CPU_H
+#define HW_SIFIVE_CPU_H
+
+#if defined(TARGET_RISCV32)
+#define SIFIVE_E_CPU TYPE_RISCV_CPU_SIFIVE_E31
+#define SIFIVE_U_CPU TYPE_RISCV_CPU_SIFIVE_U34
+#elif defined(TARGET_RISCV64)
+#define SIFIVE_E_CPU TYPE_RISCV_CPU_SIFIVE_E51
+#define SIFIVE_U_CPU TYPE_RISCV_CPU_SIFIVE_U54
+#endif
+
+#endif /* HW_SIFIVE_CPU_H */
diff --git a/include/hw/riscv/sifive_e.h b/include/hw/riscv/sifive_e.h
index d175b24..e17cdfd 100644
--- a/include/hw/riscv/sifive_e.h
+++ b/include/hw/riscv/sifive_e.h
@@ -19,6 +19,7 @@
 #ifndef HW_SIFIVE_E_H
 #define HW_SIFIVE_E_H
 
+#include "hw/riscv/sifive_cpu.h"
 #include "hw/riscv/sifive_gpio.h"
 
 #define TYPE_RISCV_E_SOC "riscv.sifive.e.soc"
@@ -83,10 +84,4 @@ enum {
 #define SIFIVE_E_PLIC_CONTEXT_BASE 0x200000
 #define SIFIVE_E_PLIC_CONTEXT_STRIDE 0x1000
 
-#if defined(TARGET_RISCV32)
-#define SIFIVE_E_CPU TYPE_RISCV_CPU_SIFIVE_E31
-#elif defined(TARGET_RISCV64)
-#define SIFIVE_E_CPU TYPE_RISCV_CPU_SIFIVE_E51
-#endif
-
 #endif
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 892f0ee..4abc621 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -20,6 +20,7 @@
 #define HW_SIFIVE_U_H
 
 #include "hw/net/cadence_gem.h"
+#include "hw/riscv/sifive_cpu.h"
 
 #define TYPE_RISCV_U_SOC "riscv.sifive.u.soc"
 #define RISCV_U_SOC(obj) \
@@ -77,10 +78,4 @@ enum {
 #define SIFIVE_U_PLIC_CONTEXT_BASE 0x200000
 #define SIFIVE_U_PLIC_CONTEXT_STRIDE 0x1000
 
-#if defined(TARGET_RISCV32)
-#define SIFIVE_U_CPU TYPE_RISCV_CPU_SIFIVE_U34
-#elif defined(TARGET_RISCV64)
-#define SIFIVE_U_CPU TYPE_RISCV_CPU_SIFIVE_U54
-#endif
-
 #endif
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 12/28] riscv: hart: Extract hart realize to a separate routine
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (9 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 11/28] riscv: Add a sifive_cpu.h to include both E and U cpu type defines Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 13/28] riscv: hart: Add a "hartid-base" property to RISC-V hart array Bin Meng
                   ` (15 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

Currently riscv_harts_realize() creates all harts based on the
same cpu type given in the hart array property. With current
implementation it can only create homogeneous harts. Exact the
hart realize to a separate routine in preparation for supporting
multiple hart arrays.

Note the file header says the RISC-V hart array holds the state
of a heterogeneous array of RISC-V harts, which is not true.
Update the comment to mention homogeneous array of RISC-V harts.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/riscv_hart.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/hw/riscv/riscv_hart.c b/hw/riscv/riscv_hart.c
index ca69a1b..9deef869 100644
--- a/hw/riscv/riscv_hart.c
+++ b/hw/riscv/riscv_hart.c
@@ -3,7 +3,7 @@
  *
  * Copyright (c) 2017 SiFive, Inc.
  *
- * Holds the state of a heterogenous array of RISC-V harts
+ * Holds the state of a homogeneous array of RISC-V harts
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -37,26 +37,33 @@ static void riscv_harts_cpu_reset(void *opaque)
     cpu_reset(CPU(cpu));
 }
 
+static void riscv_hart_realize(RISCVHartArrayState *s, int idx,
+                               char *cpu_type, Error **errp)
+{
+    Error *err = NULL;
+
+    object_initialize_child(OBJECT(s), "harts[*]", &s->harts[idx],
+                            sizeof(RISCVCPU), cpu_type,
+                            &error_abort, NULL);
+    s->harts[idx].env.mhartid = idx;
+    qemu_register_reset(riscv_harts_cpu_reset, &s->harts[idx]);
+    object_property_set_bool(OBJECT(&s->harts[idx]), true,
+                             "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+}
+
 static void riscv_harts_realize(DeviceState *dev, Error **errp)
 {
     RISCVHartArrayState *s = RISCV_HART_ARRAY(dev);
-    Error *err = NULL;
     int n;
 
     s->harts = g_new0(RISCVCPU, s->num_harts);
 
     for (n = 0; n < s->num_harts; n++) {
-        object_initialize_child(OBJECT(s), "harts[*]", &s->harts[n],
-                                sizeof(RISCVCPU), s->cpu_type,
-                                &error_abort, NULL);
-        s->harts[n].env.mhartid = n;
-        qemu_register_reset(riscv_harts_cpu_reset, &s->harts[n]);
-        object_property_set_bool(OBJECT(&s->harts[n]), true,
-                                 "realized", &err);
-        if (err) {
-            error_propagate(errp, err);
-            return;
-        }
+        riscv_hart_realize(s, n, s->cpu_type, errp);
     }
 }
 
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 13/28] riscv: hart: Add a "hartid-base" property to RISC-V hart array
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (10 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 12/28] riscv: hart: Extract hart realize to a separate routine Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-22 22:40   ` Alistair Francis
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 14/28] riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC Bin Meng
                   ` (14 subsequent siblings)
  26 siblings, 1 reply; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

At present each hart's hartid in a RISC-V hart array is assigned
the same value of its index in the hart array. But for a system
that has multiple hart arrays, this is not the case any more.

Add a new "hartid-base" property so that hartid number can be
assigned based on the property value.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

---

Changes in v4:
- new patch to add a "hartid-base" property to RISC-V hart array

Changes in v3: None
Changes in v2: None

 hw/riscv/riscv_hart.c         | 8 +++++---
 include/hw/riscv/riscv_hart.h | 1 +
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/hw/riscv/riscv_hart.c b/hw/riscv/riscv_hart.c
index 9deef869..52ab86a 100644
--- a/hw/riscv/riscv_hart.c
+++ b/hw/riscv/riscv_hart.c
@@ -27,6 +27,7 @@
 
 static Property riscv_harts_props[] = {
     DEFINE_PROP_UINT32("num-harts", RISCVHartArrayState, num_harts, 1),
+    DEFINE_PROP_UINT32("hartid-base", RISCVHartArrayState, hartid_base, 0),
     DEFINE_PROP_STRING("cpu-type", RISCVHartArrayState, cpu_type),
     DEFINE_PROP_END_OF_LIST(),
 };
@@ -37,7 +38,7 @@ static void riscv_harts_cpu_reset(void *opaque)
     cpu_reset(CPU(cpu));
 }
 
-static void riscv_hart_realize(RISCVHartArrayState *s, int idx,
+static void riscv_hart_realize(RISCVHartArrayState *s, int idx, uint32_t hartid,
                                char *cpu_type, Error **errp)
 {
     Error *err = NULL;
@@ -45,7 +46,7 @@ static void riscv_hart_realize(RISCVHartArrayState *s, int idx,
     object_initialize_child(OBJECT(s), "harts[*]", &s->harts[idx],
                             sizeof(RISCVCPU), cpu_type,
                             &error_abort, NULL);
-    s->harts[idx].env.mhartid = idx;
+    s->harts[idx].env.mhartid = hartid;
     qemu_register_reset(riscv_harts_cpu_reset, &s->harts[idx]);
     object_property_set_bool(OBJECT(&s->harts[idx]), true,
                              "realized", &err);
@@ -58,12 +59,13 @@ static void riscv_hart_realize(RISCVHartArrayState *s, int idx,
 static void riscv_harts_realize(DeviceState *dev, Error **errp)
 {
     RISCVHartArrayState *s = RISCV_HART_ARRAY(dev);
+    uint32_t hartid = s->hartid_base;
     int n;
 
     s->harts = g_new0(RISCVCPU, s->num_harts);
 
     for (n = 0; n < s->num_harts; n++) {
-        riscv_hart_realize(s, n, s->cpu_type, errp);
+        riscv_hart_realize(s, n, hartid + n, s->cpu_type, errp);
     }
 }
 
diff --git a/include/hw/riscv/riscv_hart.h b/include/hw/riscv/riscv_hart.h
index 0671d88..1984e30 100644
--- a/include/hw/riscv/riscv_hart.h
+++ b/include/hw/riscv/riscv_hart.h
@@ -32,6 +32,7 @@ typedef struct RISCVHartArrayState {
 
     /*< public >*/
     uint32_t num_harts;
+    uint32_t hartid_base;
     char *cpu_type;
     RISCVCPU *harts;
 } RISCVHartArrayState;
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 14/28] riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (11 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 13/28] riscv: hart: Add a "hartid-base" property to RISC-V hart array Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 15/28] riscv: sifive_u: Set the minimum number of cpus to 2 Bin Meng
                   ` (13 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54
RISC-V cores. Currently the sifive_u machine only populates 4 U54
cores. Update the max cpu number to 5 to reflect the real hardware,
by creating 2 CPU clusters as containers for RISC-V hart arrays to
populate heterogeneous harts.

The cpu nodes in the generated DTS have been updated as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

---

Changes in v4:
- changed to create clusters for each cpu type

Changes in v3:
- changed to use macros for management and compute cpu count

Changes in v2:
- fixed the "interrupts-extended" property size

 hw/riscv/sifive_u.c         | 102 +++++++++++++++++++++++++++++++++-----------
 include/hw/riscv/sifive_u.h |   8 +++-
 2 files changed, 84 insertions(+), 26 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 3f58f61..0e5bbe7 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -10,7 +10,8 @@
  * 1) CLINT (Core Level Interruptor)
  * 2) PLIC (Platform Level Interrupt Controller)
  *
- * This board currently uses a hardcoded devicetree that indicates one hart.
+ * This board currently generates devicetree dynamically that indicates at most
+ * five harts.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -26,6 +27,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/cutils.h"
 #include "qemu/log.h"
 #include "qemu/error-report.h"
 #include "qapi/error.h"
@@ -34,6 +36,7 @@
 #include "hw/loader.h"
 #include "hw/sysbus.h"
 #include "hw/char/serial.h"
+#include "hw/cpu/cluster.h"
 #include "target/riscv/cpu.h"
 #include "hw/riscv/riscv_hart.h"
 #include "hw/riscv/sifive_plic.h"
@@ -69,6 +72,7 @@ static const struct MemmapEntry {
 static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     uint64_t mem_size, const char *cmdline)
 {
+    MachineState *ms = MACHINE(qdev_get_machine());
     void *fdt;
     int cpu;
     uint32_t *cells;
@@ -109,15 +113,21 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
     qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
 
-    for (cpu = s->soc.cpus.num_harts - 1; cpu >= 0; cpu--) {
+    for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) {
         int cpu_phandle = phandle++;
         nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
         char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
-        char *isa = riscv_isa_string(&s->soc.cpus.harts[cpu]);
+        char *isa;
         qemu_fdt_add_subnode(fdt, nodename);
         qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
                               SIFIVE_U_CLOCK_FREQ);
-        qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
+        /* cpu 0 is the management hart that does not have mmu */
+        if (cpu != 0) {
+            qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
+            isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]);
+        } else {
+            isa = riscv_isa_string(&s->soc.e_cpus.harts[0]);
+        }
         qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa);
         qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv");
         qemu_fdt_setprop_string(fdt, nodename, "status", "okay");
@@ -133,8 +143,8 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
         g_free(nodename);
     }
 
-    cells =  g_new0(uint32_t, s->soc.cpus.num_harts * 4);
-    for (cpu = 0; cpu < s->soc.cpus.num_harts; cpu++) {
+    cells =  g_new0(uint32_t, ms->smp.cpus * 4);
+    for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
         nodename =
             g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
         uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
@@ -152,20 +162,26 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
         0x0, memmap[SIFIVE_U_CLINT].base,
         0x0, memmap[SIFIVE_U_CLINT].size);
     qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
-        cells, s->soc.cpus.num_harts * sizeof(uint32_t) * 4);
+        cells, ms->smp.cpus * sizeof(uint32_t) * 4);
     g_free(cells);
     g_free(nodename);
 
     plic_phandle = phandle++;
-    cells =  g_new0(uint32_t, s->soc.cpus.num_harts * 4);
-    for (cpu = 0; cpu < s->soc.cpus.num_harts; cpu++) {
+    cells =  g_new0(uint32_t, ms->smp.cpus * 4 - 2);
+    for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
         nodename =
             g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
         uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
-        cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
-        cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT);
-        cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle);
-        cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT);
+        /* cpu 0 is the management hart that does not have S-mode */
+        if (cpu == 0) {
+            cells[0] = cpu_to_be32(intc_phandle);
+            cells[1] = cpu_to_be32(IRQ_M_EXT);
+        } else {
+            cells[cpu * 4 - 2] = cpu_to_be32(intc_phandle);
+            cells[cpu * 4 - 1] = cpu_to_be32(IRQ_M_EXT);
+            cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
+            cells[cpu * 4 + 1] = cpu_to_be32(IRQ_S_EXT);
+        }
         g_free(nodename);
     }
     nodename = g_strdup_printf("/soc/interrupt-controller@%lx",
@@ -175,7 +191,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0");
     qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
     qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
-        cells, s->soc.cpus.num_harts * sizeof(uint32_t) * 4);
+        cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t));
     qemu_fdt_setprop_cells(fdt, nodename, "reg",
         0x0, memmap[SIFIVE_U_PLIC].base,
         0x0, memmap[SIFIVE_U_PLIC].size);
@@ -338,12 +354,39 @@ static void riscv_sifive_u_soc_init(Object *obj)
     MachineState *ms = MACHINE(qdev_get_machine());
     SiFiveUSoCState *s = RISCV_U_SOC(obj);
 
-    object_initialize_child(obj, "cpus", &s->cpus, sizeof(s->cpus),
-                            TYPE_RISCV_HART_ARRAY, &error_abort, NULL);
-    object_property_set_str(OBJECT(&s->cpus), SIFIVE_U_CPU, "cpu-type",
-                            &error_abort);
-    object_property_set_int(OBJECT(&s->cpus), ms->smp.cpus, "num-harts",
-                            &error_abort);
+    object_initialize_child(obj, "e-cluster", &s->e_cluster,
+                            sizeof(s->e_cluster), TYPE_CPU_CLUSTER,
+                            &error_abort, NULL);
+    qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0);
+
+    object_initialize_child(OBJECT(&s->e_cluster), "e-cpus",
+                            &s->e_cpus, sizeof(s->e_cpus),
+                            TYPE_RISCV_HART_ARRAY, &error_abort,
+                            NULL);
+    object_property_set_uint(OBJECT(&s->e_cpus), 1,
+                             "num-harts", &error_abort);
+    object_property_set_uint(OBJECT(&s->e_cpus), 0,
+                             "hartid-base", &error_abort);
+    object_property_set_str(OBJECT(&s->e_cpus), SIFIVE_E_CPU,
+                            "cpu-type", &error_abort);
+
+    if (ms->smp.cpus > 1) {
+        object_initialize_child(obj, "u-cluster", &s->u_cluster,
+                                sizeof(s->u_cluster), TYPE_CPU_CLUSTER,
+                                &error_abort, NULL);
+        qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1);
+
+        object_initialize_child(OBJECT(&s->u_cluster), "u-cpus",
+                                &s->u_cpus, sizeof(s->u_cpus),
+                                TYPE_RISCV_HART_ARRAY, &error_abort,
+                                NULL);
+        object_property_set_uint(OBJECT(&s->u_cpus), ms->smp.cpus - 1,
+                                 "num-harts", &error_abort);
+        object_property_set_uint(OBJECT(&s->u_cpus), 1,
+                                 "hartid-base", &error_abort);
+        object_property_set_str(OBJECT(&s->u_cpus), SIFIVE_U_CPU,
+                                "cpu-type", &error_abort);
+    }
 
     sysbus_init_child_obj(obj, "gem", &s->gem, sizeof(s->gem),
                           TYPE_CADENCE_GEM);
@@ -363,7 +406,19 @@ static void riscv_sifive_u_soc_realize(DeviceState *dev, Error **errp)
     Error *err = NULL;
     NICInfo *nd = &nd_table[0];
 
-    object_property_set_bool(OBJECT(&s->cpus), true, "realized",
+    object_property_set_bool(OBJECT(&s->e_cpus), true, "realized",
+                             &error_abort);
+    object_property_set_bool(OBJECT(&s->u_cpus), true, "realized",
+                             &error_abort);
+    /*
+     * The cluster must be realized after the RISC-V hart array container,
+     * as the container's CPU object is only created on realize, and the
+     * CPU must exist and have been parented into the cluster before the
+     * cluster is realized.
+     */
+    object_property_set_bool(OBJECT(&s->e_cluster), true, "realized",
+                             &error_abort);
+    object_property_set_bool(OBJECT(&s->u_cluster), true, "realized",
                              &error_abort);
 
     /* boot rom */
@@ -429,10 +484,7 @@ static void riscv_sifive_u_machine_init(MachineClass *mc)
 {
     mc->desc = "RISC-V Board compatible with SiFive U SDK";
     mc->init = riscv_sifive_u_init;
-    /* The real hardware has 5 CPUs, but one of them is a small embedded power
-     * management CPU.
-     */
-    mc->max_cpus = 4;
+    mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT;
 }
 
 DEFINE_MACHINE("sifive_u", riscv_sifive_u_machine_init)
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 4abc621..7a1a4f3 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -31,7 +31,10 @@ typedef struct SiFiveUSoCState {
     SysBusDevice parent_obj;
 
     /*< public >*/
-    RISCVHartArrayState cpus;
+    CPUClusterState e_cluster;
+    CPUClusterState u_cluster;
+    RISCVHartArrayState e_cpus;
+    RISCVHartArrayState u_cpus;
     DeviceState *plic;
     CadenceGEMState gem;
 } SiFiveUSoCState;
@@ -68,6 +71,9 @@ enum {
     SIFIVE_U_GEM_CLOCK_FREQ = 125000000
 };
 
+#define SIFIVE_U_MANAGEMENT_CPU_COUNT   1
+#define SIFIVE_U_COMPUTE_CPU_COUNT      4
+
 #define SIFIVE_U_PLIC_HART_CONFIG "MS"
 #define SIFIVE_U_PLIC_NUM_SOURCES 54
 #define SIFIVE_U_PLIC_NUM_PRIORITIES 7
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 15/28] riscv: sifive_u: Set the minimum number of cpus to 2
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (12 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 14/28] riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 16/28] riscv: sifive_u: Update PLIC hart topology configuration string Bin Meng
                   ` (12 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

It is not useful if we only have one management CPU.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

---

Changes in v4: None
Changes in v3:
- use management cpu count + 1 for the min_cpus

Changes in v2:
- update the file header to indicate at least 2 harts are created

 hw/riscv/sifive_u.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 0e5bbe7..a36cd77 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -10,8 +10,8 @@
  * 1) CLINT (Core Level Interruptor)
  * 2) PLIC (Platform Level Interrupt Controller)
  *
- * This board currently generates devicetree dynamically that indicates at most
- * five harts.
+ * This board currently generates devicetree dynamically that indicates at least
+ * two harts and up to five harts.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -485,6 +485,7 @@ static void riscv_sifive_u_machine_init(MachineClass *mc)
     mc->desc = "RISC-V Board compatible with SiFive U SDK";
     mc->init = riscv_sifive_u_init;
     mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT;
+    mc->min_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + 1;
 }
 
 DEFINE_MACHINE("sifive_u", riscv_sifive_u_machine_init)
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 16/28] riscv: sifive_u: Update PLIC hart topology configuration string
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (13 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 15/28] riscv: sifive_u: Set the minimum number of cpus to 2 Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 17/28] riscv: sifive: Implement PRCI model for FU540 Bin Meng
                   ` (11 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

With heterogeneous harts config, the PLIC hart topology configuration
string are "M,MS,.." because of the monitor hart #0.

Suggested-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index a36cd77..284f7a5 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -433,10 +433,11 @@ static void riscv_sifive_u_soc_realize(DeviceState *dev, Error **errp)
     plic_hart_config = g_malloc0(plic_hart_config_len);
     for (i = 0; i < ms->smp.cpus; i++) {
         if (i != 0) {
-            strncat(plic_hart_config, ",", plic_hart_config_len);
+            strncat(plic_hart_config, "," SIFIVE_U_PLIC_HART_CONFIG,
+                    plic_hart_config_len);
+        } else {
+            strncat(plic_hart_config, "M", plic_hart_config_len);
         }
-        strncat(plic_hart_config, SIFIVE_U_PLIC_HART_CONFIG,
-                plic_hart_config_len);
         plic_hart_config_len -= (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1);
     }
 
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 17/28] riscv: sifive: Implement PRCI model for FU540
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (14 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 16/28] riscv: sifive_u: Update PLIC hart topology configuration string Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19 20:21   ` Alistair Francis
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 18/28] riscv: sifive_u: Generate hfclk and rtcclk nodes Bin Meng
                   ` (10 subsequent siblings)
  26 siblings, 1 reply; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

This adds a simple PRCI model for FU540 (sifive_u). It has different
register layout from the existing PRCI model for FE310 (sifive_e).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

---

Changes in v4:
- prefix all macros/variables/functions with SIFIVE_U/sifive_u
  in the sifive_u_prci driver

Changes in v3: None
Changes in v2: None

 hw/riscv/Makefile.objs           |   1 +
 hw/riscv/sifive_u_prci.c         | 165 +++++++++++++++++++++++++++++++++++++++
 include/hw/riscv/sifive_u_prci.h |  90 +++++++++++++++++++++
 3 files changed, 256 insertions(+)
 create mode 100644 hw/riscv/sifive_u_prci.c
 create mode 100644 include/hw/riscv/sifive_u_prci.h

diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs
index c859697..b95bbd5 100644
--- a/hw/riscv/Makefile.objs
+++ b/hw/riscv/Makefile.objs
@@ -8,6 +8,7 @@ obj-$(CONFIG_SIFIVE) += sifive_gpio.o
 obj-$(CONFIG_SIFIVE) += sifive_plic.o
 obj-$(CONFIG_SIFIVE) += sifive_test.o
 obj-$(CONFIG_SIFIVE_U) += sifive_u.o
+obj-$(CONFIG_SIFIVE_U) += sifive_u_prci.o
 obj-$(CONFIG_SIFIVE) += sifive_uart.o
 obj-$(CONFIG_SPIKE) += spike.o
 obj-$(CONFIG_RISCV_VIRT) += virt.o
diff --git a/hw/riscv/sifive_u_prci.c b/hw/riscv/sifive_u_prci.c
new file mode 100644
index 0000000..578c643
--- /dev/null
+++ b/hw/riscv/sifive_u_prci.c
@@ -0,0 +1,165 @@
+/*
+ * QEMU SiFive U PRCI (Power, Reset, Clock, Interrupt)
+ *
+ * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Simple model of the PRCI to emulate register reads made by the SDK BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "qemu/module.h"
+#include "target/riscv/cpu.h"
+#include "hw/riscv/sifive_u_prci.h"
+
+static uint64_t sifive_u_prci_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    SiFiveUPRCIState *s = opaque;
+
+    switch (addr) {
+    case SIFIVE_U_PRCI_HFXOSCCFG:
+        return s->hfxosccfg;
+    case SIFIVE_U_PRCI_COREPLLCFG0:
+        return s->corepllcfg0;
+    case SIFIVE_U_PRCI_DDRPLLCFG0:
+        return s->ddrpllcfg0;
+    case SIFIVE_U_PRCI_DDRPLLCFG1:
+        return s->ddrpllcfg1;
+    case SIFIVE_U_PRCI_GEMGXLPLLCFG0:
+        return s->gemgxlpllcfg0;
+    case SIFIVE_U_PRCI_GEMGXLPLLCFG1:
+        return s->gemgxlpllcfg1;
+    case SIFIVE_U_PRCI_CORECLKSEL:
+        return s->coreclksel;
+    case SIFIVE_U_PRCI_DEVICESRESET:
+        return s->devicesreset;
+    case SIFIVE_U_PRCI_CLKMUXSTATUS:
+        return s->clkmuxstatus;
+    }
+
+    hw_error("%s: read: addr=0x%x\n", __func__, (int)addr);
+    return 0;
+}
+
+static void sifive_u_prci_write(void *opaque, hwaddr addr,
+                                uint64_t val64, unsigned int size)
+{
+    SiFiveUPRCIState *s = opaque;
+
+    switch (addr) {
+    case SIFIVE_U_PRCI_HFXOSCCFG:
+        s->hfxosccfg = (uint32_t) val64;
+        /* OSC stays ready */
+        s->hfxosccfg |= SIFIVE_U_PRCI_HFXOSCCFG_RDY;
+        break;
+    case SIFIVE_U_PRCI_COREPLLCFG0:
+        s->corepllcfg0 = (uint32_t) val64;
+        /* internal feedback */
+        s->corepllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_FSE;
+        /* PLL stays locked */
+        s->corepllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_LOCK;
+        break;
+    case SIFIVE_U_PRCI_DDRPLLCFG0:
+        s->ddrpllcfg0 = (uint32_t) val64;
+        /* internal feedback */
+        s->ddrpllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_FSE;
+        /* PLL stays locked */
+        s->ddrpllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_LOCK;
+        break;
+    case SIFIVE_U_PRCI_DDRPLLCFG1:
+        s->ddrpllcfg1 = (uint32_t) val64;
+        break;
+    case SIFIVE_U_PRCI_GEMGXLPLLCFG0:
+        s->gemgxlpllcfg0 = (uint32_t) val64;
+         /* internal feedback */
+        s->gemgxlpllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_FSE;
+       /* PLL stays locked */
+        s->gemgxlpllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_LOCK;
+        break;
+    case SIFIVE_U_PRCI_GEMGXLPLLCFG1:
+        s->gemgxlpllcfg1 = (uint32_t) val64;
+        break;
+    case SIFIVE_U_PRCI_CORECLKSEL:
+        s->coreclksel = (uint32_t) val64;
+        break;
+    case SIFIVE_U_PRCI_DEVICESRESET:
+        s->devicesreset = (uint32_t) val64;
+        break;
+    case SIFIVE_U_PRCI_CLKMUXSTATUS:
+        s->clkmuxstatus = (uint32_t) val64;
+        break;
+    default:
+        hw_error("%s: bad write: addr=0x%x v=0x%x\n",
+                 __func__, (int)addr, (int)val64);
+    }
+}
+
+static const MemoryRegionOps sifive_u_prci_ops = {
+    .read = sifive_u_prci_read,
+    .write = sifive_u_prci_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4
+    }
+};
+
+static void sifive_u_prci_init(Object *obj)
+{
+    SiFiveUPRCIState *s = SIFIVE_U_PRCI(obj);
+
+    memory_region_init_io(&s->mmio, obj, &sifive_u_prci_ops, s,
+                          TYPE_SIFIVE_U_PRCI, SIFIVE_U_PRCI_REG_SIZE);
+    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+
+    /* Initialize register to power-on-reset values */
+    s->hfxosccfg = (SIFIVE_U_PRCI_HFXOSCCFG_RDY | SIFIVE_U_PRCI_HFXOSCCFG_EN);
+    s->corepllcfg0 = (SIFIVE_U_PRCI_PLLCFG0_DIVR | SIFIVE_U_PRCI_PLLCFG0_DIVF |
+                      SIFIVE_U_PRCI_PLLCFG0_DIVQ | SIFIVE_U_PRCI_PLLCFG0_FSE |
+                      SIFIVE_U_PRCI_PLLCFG0_LOCK);
+    s->ddrpllcfg0 = (SIFIVE_U_PRCI_PLLCFG0_DIVR | SIFIVE_U_PRCI_PLLCFG0_DIVF |
+                     SIFIVE_U_PRCI_PLLCFG0_DIVQ | SIFIVE_U_PRCI_PLLCFG0_FSE |
+                     SIFIVE_U_PRCI_PLLCFG0_LOCK);
+    s->gemgxlpllcfg0 = (SIFIVE_U_PRCI_PLLCFG0_DIVR |
+                        SIFIVE_U_PRCI_PLLCFG0_DIVF |
+                        SIFIVE_U_PRCI_PLLCFG0_DIVQ |
+                        SIFIVE_U_PRCI_PLLCFG0_FSE |
+                        SIFIVE_U_PRCI_PLLCFG0_LOCK);
+    s->coreclksel = SIFIVE_U_PRCI_CORECLKSEL_HFCLK;
+}
+
+static const TypeInfo sifive_u_prci_info = {
+    .name          = TYPE_SIFIVE_U_PRCI,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(SiFiveUPRCIState),
+    .instance_init = sifive_u_prci_init,
+};
+
+static void sifive_u_prci_register_types(void)
+{
+    type_register_static(&sifive_u_prci_info);
+}
+
+type_init(sifive_u_prci_register_types)
+
+
+/* Create PRCI device */
+DeviceState *sifive_u_prci_create(hwaddr addr)
+{
+    DeviceState *dev = qdev_create(NULL, TYPE_SIFIVE_U_PRCI);
+    qdev_init_nofail(dev);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
+    return dev;
+}
diff --git a/include/hw/riscv/sifive_u_prci.h b/include/hw/riscv/sifive_u_prci.h
new file mode 100644
index 0000000..66eacb5
--- /dev/null
+++ b/include/hw/riscv/sifive_u_prci.h
@@ -0,0 +1,90 @@
+/*
+ * QEMU SiFive U PRCI (Power, Reset, Clock, Interrupt) interface
+ *
+ * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_SIFIVE_U_PRCI_H
+#define HW_SIFIVE_U_PRCI_H
+
+enum {
+    SIFIVE_U_PRCI_HFXOSCCFG     = 0x00,
+    SIFIVE_U_PRCI_COREPLLCFG0   = 0x04,
+    SIFIVE_U_PRCI_DDRPLLCFG0    = 0x0C,
+    SIFIVE_U_PRCI_DDRPLLCFG1    = 0x10,
+    SIFIVE_U_PRCI_GEMGXLPLLCFG0 = 0x1C,
+    SIFIVE_U_PRCI_GEMGXLPLLCFG1 = 0x20,
+    SIFIVE_U_PRCI_CORECLKSEL    = 0x24,
+    SIFIVE_U_PRCI_DEVICESRESET  = 0x28,
+    SIFIVE_U_PRCI_CLKMUXSTATUS  = 0x2C
+};
+
+/*
+ * Current FU540-C000 manual says ready bit is at bit 29, but
+ * freedom-u540-c000-bootloader codes (ux00prci.h) says it is at bit 31.
+ * We have to trust the actual codes that worked.
+ *
+ * see https://github.com/sifive/freedom-u540-c000-bootloader
+ */
+enum {
+    SIFIVE_U_PRCI_HFXOSCCFG_EN  = (1 << 30),
+    SIFIVE_U_PRCI_HFXOSCCFG_RDY = (1 << 31),
+};
+
+/* xxxPLLCFG0 register bits */
+enum {
+    SIFIVE_U_PRCI_PLLCFG0_DIVR  = (1 << 0),
+    SIFIVE_U_PRCI_PLLCFG0_DIVF  = (31 << 6),
+    SIFIVE_U_PRCI_PLLCFG0_DIVQ  = (3 << 15),
+    SIFIVE_U_PRCI_PLLCFG0_FSE   = (1 << 25),
+    SIFIVE_U_PRCI_PLLCFG0_LOCK  = (1 << 31)
+};
+
+/* xxxPLLCFG1 register bits */
+enum {
+    SIFIVE_U_PRCI_PLLCFG1_CKE   = (1 << 24)
+};
+
+enum {
+    SIFIVE_U_PRCI_CORECLKSEL_HFCLK = (1 << 0)
+};
+
+#define SIFIVE_U_PRCI_REG_SIZE  0x1000
+
+#define TYPE_SIFIVE_U_PRCI      "riscv.sifive.u.prci"
+
+#define SIFIVE_U_PRCI(obj) \
+    OBJECT_CHECK(SiFiveUPRCIState, (obj), TYPE_SIFIVE_U_PRCI)
+
+typedef struct SiFiveUPRCIState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion mmio;
+    uint32_t hfxosccfg;
+    uint32_t corepllcfg0;
+    uint32_t ddrpllcfg0;
+    uint32_t ddrpllcfg1;
+    uint32_t gemgxlpllcfg0;
+    uint32_t gemgxlpllcfg1;
+    uint32_t coreclksel;
+    uint32_t devicesreset;
+    uint32_t clkmuxstatus;
+} SiFiveUPRCIState;
+
+DeviceState *sifive_u_prci_create(hwaddr addr);
+
+#endif /* HW_SIFIVE_U_PRCI_H */
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 18/28] riscv: sifive_u: Generate hfclk and rtcclk nodes
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (15 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 17/28] riscv: sifive: Implement PRCI model for FU540 Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19 20:22   ` Alistair Francis
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 19/28] riscv: sifive_u: Add PRCI block to the SoC Bin Meng
                   ` (9 subsequent siblings)
  26 siblings, 1 reply; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

To keep in sync with Linux kernel device tree, generate hfclk and
rtcclk nodes in the device tree, to be referenced by PRCI node.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c         | 23 +++++++++++++++++++++++
 include/hw/riscv/sifive_u.h |  2 ++
 2 files changed, 25 insertions(+)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 284f7a5..08db741 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -80,6 +80,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     char ethclk_names[] = "pclk\0hclk\0tx_clk";
     uint32_t plic_phandle, ethclk_phandle, phandle = 1;
     uint32_t uartclk_phandle;
+    uint32_t hfclk_phandle, rtcclk_phandle;
 
     fdt = s->fdt = create_device_tree(&s->fdt_size);
     if (!fdt) {
@@ -98,6 +99,28 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2);
     qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2);
 
+    hfclk_phandle = phandle++;
+    nodename = g_strdup_printf("/hfclk");
+    qemu_fdt_add_subnode(fdt, nodename);
+    qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle);
+    qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk");
+    qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
+        SIFIVE_U_HFCLK_FREQ);
+    qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
+    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
+    g_free(nodename);
+
+    rtcclk_phandle = phandle++;
+    nodename = g_strdup_printf("/rtcclk");
+    qemu_fdt_add_subnode(fdt, nodename);
+    qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle);
+    qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk");
+    qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
+        SIFIVE_U_RTCCLK_FREQ);
+    qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
+    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
+    g_free(nodename);
+
     nodename = g_strdup_printf("/memory@%lx",
         (long)memmap[SIFIVE_U_DRAM].base);
     qemu_fdt_add_subnode(fdt, nodename);
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 7a1a4f3..debbf28 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -68,6 +68,8 @@ enum {
 
 enum {
     SIFIVE_U_CLOCK_FREQ = 1000000000,
+    SIFIVE_U_HFCLK_FREQ = 33333333,
+    SIFIVE_U_RTCCLK_FREQ = 1000000,
     SIFIVE_U_GEM_CLOCK_FREQ = 125000000
 };
 
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 19/28] riscv: sifive_u: Add PRCI block to the SoC
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (16 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 18/28] riscv: sifive_u: Generate hfclk and rtcclk nodes Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 20/28] riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes Bin Meng
                   ` (8 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

Add PRCI mmio base address and size mappings to sifive_u machine,
and generate the corresponding device tree node.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c         | 21 ++++++++++++++++++++-
 include/hw/riscv/sifive_u.h |  1 +
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 08db741..bd5551c 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -9,6 +9,7 @@
  * 0) UART
  * 1) CLINT (Core Level Interruptor)
  * 2) PLIC (Platform Level Interrupt Controller)
+ * 3) PRCI (Power, Reset, Clock, Interrupt)
  *
  * This board currently generates devicetree dynamically that indicates at least
  * two harts and up to five harts.
@@ -43,6 +44,7 @@
 #include "hw/riscv/sifive_clint.h"
 #include "hw/riscv/sifive_uart.h"
 #include "hw/riscv/sifive_u.h"
+#include "hw/riscv/sifive_u_prci.h"
 #include "hw/riscv/boot.h"
 #include "chardev/char.h"
 #include "sysemu/arch_init.h"
@@ -61,6 +63,7 @@ static const struct MemmapEntry {
     [SIFIVE_U_MROM] =     {     0x1000,    0x11000 },
     [SIFIVE_U_CLINT] =    {  0x2000000,    0x10000 },
     [SIFIVE_U_PLIC] =     {  0xc000000,  0x4000000 },
+    [SIFIVE_U_PRCI] =     { 0x10000000,     0x1000 },
     [SIFIVE_U_UART0] =    { 0x10013000,     0x1000 },
     [SIFIVE_U_UART1] =    { 0x10023000,     0x1000 },
     [SIFIVE_U_DRAM] =     { 0x80000000,        0x0 },
@@ -78,7 +81,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     uint32_t *cells;
     char *nodename;
     char ethclk_names[] = "pclk\0hclk\0tx_clk";
-    uint32_t plic_phandle, ethclk_phandle, phandle = 1;
+    uint32_t plic_phandle, prci_phandle, ethclk_phandle, phandle = 1;
     uint32_t uartclk_phandle;
     uint32_t hfclk_phandle, rtcclk_phandle;
 
@@ -189,6 +192,21 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     g_free(cells);
     g_free(nodename);
 
+    prci_phandle = phandle++;
+    nodename = g_strdup_printf("/soc/clock-controller@%lx",
+        (long)memmap[SIFIVE_U_PRCI].base);
+    qemu_fdt_add_subnode(fdt, nodename);
+    qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle);
+    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1);
+    qemu_fdt_setprop_cells(fdt, nodename, "clocks",
+        hfclk_phandle, rtcclk_phandle);
+    qemu_fdt_setprop_cells(fdt, nodename, "reg",
+        0x0, memmap[SIFIVE_U_PRCI].base,
+        0x0, memmap[SIFIVE_U_PRCI].size);
+    qemu_fdt_setprop_string(fdt, nodename, "compatible",
+        "sifive,fu540-c000-prci");
+    g_free(nodename);
+
     plic_phandle = phandle++;
     cells =  g_new0(uint32_t, ms->smp.cpus * 4 - 2);
     for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
@@ -483,6 +501,7 @@ static void riscv_sifive_u_soc_realize(DeviceState *dev, Error **errp)
     sifive_clint_create(memmap[SIFIVE_U_CLINT].base,
         memmap[SIFIVE_U_CLINT].size, ms->smp.cpus,
         SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE);
+    sifive_u_prci_create(memmap[SIFIVE_U_PRCI].base);
 
     for (i = 0; i < SIFIVE_U_PLIC_NUM_SOURCES; i++) {
         plic_gpios[i] = qdev_get_gpio_in(DEVICE(s->plic), i);
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index debbf28..0ec04df 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -54,6 +54,7 @@ enum {
     SIFIVE_U_MROM,
     SIFIVE_U_CLINT,
     SIFIVE_U_PLIC,
+    SIFIVE_U_PRCI,
     SIFIVE_U_UART0,
     SIFIVE_U_UART1,
     SIFIVE_U_DRAM,
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 20/28] riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (17 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 19/28] riscv: sifive_u: Add PRCI block to the SoC Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-20 18:26   ` Alistair Francis
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 21/28] riscv: sifive_u: Update UART base addresses and IRQs Bin Meng
                   ` (7 subsequent siblings)
  26 siblings, 1 reply; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

Now that we have added a PRCI node, update existing UART and ethernet
nodes to reference PRCI as their clock sources, to keep in sync with
the Linux kernel device tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c              |  7 ++++---
 include/hw/riscv/sifive_u_prci.h | 10 ++++++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index bd5551c..8818fd6 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -80,7 +80,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     int cpu;
     uint32_t *cells;
     char *nodename;
-    char ethclk_names[] = "pclk\0hclk\0tx_clk";
+    char ethclk_names[] = "pclk\0hclk";
     uint32_t plic_phandle, prci_phandle, ethclk_phandle, phandle = 1;
     uint32_t uartclk_phandle;
     uint32_t hfclk_phandle, rtcclk_phandle;
@@ -265,7 +265,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
-        ethclk_phandle, ethclk_phandle, ethclk_phandle);
+        prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL);
     qemu_fdt_setprop(fdt, nodename, "clock-names", ethclk_names,
         sizeof(ethclk_names));
     qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
@@ -295,7 +295,8 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cells(fdt, nodename, "reg",
         0x0, memmap[SIFIVE_U_UART0].base,
         0x0, memmap[SIFIVE_U_UART0].size);
-    qemu_fdt_setprop_cell(fdt, nodename, "clocks", uartclk_phandle);
+    qemu_fdt_setprop_cells(fdt, nodename, "clocks",
+        prci_phandle, PRCI_CLK_TLCLK);
     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ);
 
diff --git a/include/hw/riscv/sifive_u_prci.h b/include/hw/riscv/sifive_u_prci.h
index 66eacb5..cdf1d33 100644
--- a/include/hw/riscv/sifive_u_prci.h
+++ b/include/hw/riscv/sifive_u_prci.h
@@ -87,4 +87,14 @@ typedef struct SiFiveUPRCIState {
 
 DeviceState *sifive_u_prci_create(hwaddr addr);
 
+/*
+ * Clock indexes for use by Device Tree data and the PRCI driver.
+ *
+ * These values are from sifive-fu540-prci.h in the Linux kernel.
+ */
+#define PRCI_CLK_COREPLL        0
+#define PRCI_CLK_DDRPLL         1
+#define PRCI_CLK_GEMGXLPLL      2
+#define PRCI_CLK_TLCLK          3
+
 #endif /* HW_SIFIVE_U_PRCI_H */
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 21/28] riscv: sifive_u: Update UART base addresses and IRQs
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (18 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 20/28] riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 22/28] riscv: sifive_u: Change UART node name in device tree Bin Meng
                   ` (6 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

This updates the UART base address and IRQs to match the hardware.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jonathan Behrens <fintelia@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>

---

Changes in v4: None
Changes in v3:
- update IRQ numbers of both UARTs to match hardware as well

Changes in v2: None

 hw/riscv/sifive_u.c         | 4 ++--
 include/hw/riscv/sifive_u.h | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 8818fd6..a85db77 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -64,8 +64,8 @@ static const struct MemmapEntry {
     [SIFIVE_U_CLINT] =    {  0x2000000,    0x10000 },
     [SIFIVE_U_PLIC] =     {  0xc000000,  0x4000000 },
     [SIFIVE_U_PRCI] =     { 0x10000000,     0x1000 },
-    [SIFIVE_U_UART0] =    { 0x10013000,     0x1000 },
-    [SIFIVE_U_UART1] =    { 0x10023000,     0x1000 },
+    [SIFIVE_U_UART0] =    { 0x10010000,     0x1000 },
+    [SIFIVE_U_UART1] =    { 0x10011000,     0x1000 },
     [SIFIVE_U_DRAM] =     { 0x80000000,        0x0 },
     [SIFIVE_U_GEM] =      { 0x100900FC,     0x2000 },
 };
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 0ec04df..9acb69e 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -62,8 +62,8 @@ enum {
 };
 
 enum {
-    SIFIVE_U_UART0_IRQ = 3,
-    SIFIVE_U_UART1_IRQ = 4,
+    SIFIVE_U_UART0_IRQ = 4,
+    SIFIVE_U_UART1_IRQ = 5,
     SIFIVE_U_GEM_IRQ = 0x35
 };
 
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 22/28] riscv: sifive_u: Change UART node name in device tree
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (19 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 21/28] riscv: sifive_u: Update UART base addresses and IRQs Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 23/28] riscv: roms: Update default bios for sifive_u machine Bin Meng
                   ` (5 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

OpenSBI for fu540 does DT fix up (see fu540_modify_dt()) by updating
chosen "stdout-path" to point to "/soc/serial@...", and U-Boot will
use this information to locate the serial node and probe its driver.
However currently we generate the UART node name as "/soc/uart@...",
causing U-Boot fail to find the serial node in DT.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index a85db77..8f16028 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -288,7 +288,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     uartclk_phandle = qemu_fdt_get_phandle(fdt, nodename);
     g_free(nodename);
 
-    nodename = g_strdup_printf("/soc/uart@%lx",
+    nodename = g_strdup_printf("/soc/serial@%lx",
         (long)memmap[SIFIVE_U_UART0].base);
     qemu_fdt_add_subnode(fdt, nodename);
     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0");
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 23/28] riscv: roms: Update default bios for sifive_u machine
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (20 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 22/28] riscv: sifive_u: Change UART node name in device tree Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 24/28] riscv: sifive: Implement a model for SiFive FU540 OTP Bin Meng
                   ` (4 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

With the support of heterogeneous harts and PRCI model, it's now
possible to use the OpenSBI image (PLATFORM=sifive/fu540) built
for the real hardware.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin | Bin 40968 -> 45064 bytes
 roms/Makefile                                |   4 ++--
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin b/pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin
index 5d7a1ef6818994bac4a36818ad36043b592ce309..eb22aefdfb468cfe2804cb4b0bc422d8ebcae93b 100644
GIT binary patch
delta 10830
zcmcI~eOOf0_WwTTaAp|5zy=s$G)G2;B$Y8xQwsqZMktj?Fen8a(7-p07sHnZ7-n!l
zMBCydW6I@gkn_7&ttq)_3KlO(VP<LRlZm{D8adOwpdcXMwa*M>J-_F<-9NtbxZHEj
z{_M5aUTf{O*51R;dU|IYeF9VCYY-ChyTdf=_$;$t$%-!FBh)PF2YiLnP&GJ#RtlO4
zf`7%(Y&Ovh1uu^=BI*)uVqWvTi1HA8ri}M#lXXVj799nsK;XrsM6yhpfDIJrX~XyC
z2!|6CowN*ZcY7WO@m?9<2q^Y_gGC}=pjE1PeV*?)24lA+F1Veyny!q&5qy)IT&z**
z9rPutBL0(>5I47X9AAARDRjwiGOa}(Juz}vMdK*G692<-3vK0Nnc&)lwu}o}=nauO
zcZ?TY@G#q+qP_71r*$d=x5^cU{Rm;*npek1<SRtwoEWc4kt4Fm^WL;S$6Ms}n^g`@
zPhz$h+1_=fLx0A<{oLf3MGmS4K7y7O@*D;p>)(iPIr(~VJW~mN-36_!SG&$4uS~~N
zonLU~df7CKT(SnQcb*l>JuB8)<VmYxM7DpiMUHaBJQf*QC;Qx~(3_X^m~4qe1J<k;
zPUkBI&ft(3cl<BsYFXv$M*jJcUyY(#ve2SA`F{Q-n)!T0)MsX2qoTAHNoAt>tV<j<
zAt}_Px5(v7#4ap4@MV<l5>cB(J|0hh;{4>3FrF7NUbBFQV#_`kT`g;OzrM@A#ALL{
zFTU_?J&qa|jALA1rVijEu5Z$42A<$HLllzdOpW)s4KC2e>p^Za^`^qUJBC{Py4!EA
zutuzHbf2QIpb(0@8y_(H6QcRl+ZIXQ6a)AlE~>f3d<t6SBT36XRfmBlZ>6UUogxm|
z*kzH_OU(7-Ptx?B#rQ4vb~<{#`E`#i4&aR6drkM2ziH&Nh*hXk`_T9gC`6$aZcQh)
zV{dOMfP%ff7<nGT3Em-e#&&$ryJ#FYZ}+l;sxx1SYOq}F9hUJTrD#tIOQ}ks)7a#K
zJcE{q-j$WCuvj;>aUy+I6J_`D7soZ)`!j_sa<o{N{cNZ)?-K8%Chl2jbYfBFG)YkA
zGx8u+h=4w$Y|(dg`K>hQuzb>@g*xD?yR~LRZ00n1kc|r)?_U(B6Tyr^792v7v?!|R
zf-X*H>-Ak>>v<n~>O=8IlS+h~Y>Fke_l-#wN!wf;{Zxr>5mD#b1Oqq6nuJjfiZDAe
z9+1=DnQRAk$Jl_kV#a`T?ZBk~oPtk`As5?`i^q`D?Z`!d^u$S$QJ%qeWbhbriXHhJ
zAf2(>lu=}m9T_x+^t2;q021N)F{Hm8=|6^awj+HkZq{s^;WNrpVn<5GkjRb{0Wuv+
zq@zerJJNFu*=I+(05TC@97DR;kuGD%yLKc6$mKY1>L^dzj-<zsH|)s!fQ-a)-%(`0
z9oavI{N9fI1(3nGZ47zOj=VR9Ja0#~0WuKpk&W`~v?DvmkZ0}4%Yb|uhxm;mui25;
z#*k(^vIUTnuyqW1(T==0hWx;etOMkexbo?R0i3f{e>IBGR@o5jR~9$<IE%y$UDC;P
zE!sG(#VvXYY=S4IO$gfahK(`rZz?|f`6g>w0|D(-07zoZw)HjrO(kIKH(9^=JO<t-
z<(Lzu6;Z6b($SzZ-}3*3a?K$-Nw;Z3>?UhKu_4FYHvMB-U9Ol5;Tb}yi`Px~pI?<k
zr-V`kd7+S{c%8`6tI>{-$hQJQaxrTZ@pusP*TeGUMh6zDgaSIhCttB64&r3AWZUC0
zLcHG{g7y88>$M&cn2ly&X0?kY`UHRT@UV5Dc67>GK61lF&Gf-Vu1MmjFVS|?rnXMP
zS~hy~8X=D-nafgcAga@-Ahnk(7C>)hYpvH!N>PxPz1im`ud8~frT;?jCF_-*Yqx*y
zY;RjLl-|Fw7YY9Dhk}?!5ydp~DNUo=k7AnUQko_u<-=+kR#5S!pR-K!TIzi1Y97<L
zg(~nguRV#b@5Y8g+T8gA!XiG?SccuT%=KN;=N#@!p9hjV^h<*r`l(364$yJwxK$!(
zh2u(B8MedoE|(+`v_h9%NrtWPT<o;UunpQ0=T#o+7o&9dv_jV5fyJ$j!O)V7b#akN
zYtpCd@*~L82`~TRTUx<+i*@qpcI~7_Ft1g8YSK9{zV+}KG2a8N(p}JA(E&C@zFx>f
zbiRV)XkFOKPU~<>8)TZo5!1XJX_~T-ra1+PJ#~~=#HZqSt7CT?4Mk|>ZZVJNR!#Ci
zv_z~@uslOHNT_8Khyd34{(2ES3t4SEOns6}*`hUY{<P**5wt?yt#~qhbc#%C8`%|a
ziB5_!B{`+s%8JOX&gE^rl^(IKdL3_l`}VLMRXZp}BxDWIIF7Avv;{?P%dIsZk)LDv
zP=4Sdr53NB^LILJtJ!<*KUh9DhpgOu;rW%6FBkYzA&t1!GmQ?&t5NF!n%G6Y?-;P{
zCM^#~2T$SaK{SEh!TeTmH^t|M`F7zoAv0{>yKdr&ke3CJ1*CHy{B-^+yxVgj4h;RA
zzZQn^o5RdQp^GV6jd8@HIQn=cKD1~TeWMId4}ZyFVcu__;F;mU_*A$Hy=)MF8Gesm
z)`S14*h)`s#nrKMaC(F%?Rpv)L`<iT-^3>(ex{FqhxaI3XiF1*eQ_LJ_67cU@tgFr
z&+yZc-2rK^X8qAGM9>NaM|X<WL+diV$*_+2$uo^2Xob$tG#Jw1x!C^;92^zE$oFL8
zj3}c=D!kKn)k4uwZ)r7bfz^Cm^SoK|qAw+gK<MoL?gHJv%}Za(r1)}cfQk~h<Cpls
zn74F*k-JUA^s>ljU<~BJfrF~O%|0o?<&McD0{Em*3VS4gI6(N~BEJVXXIY&uXEeoK
zOWUTyB6tr4?;UrQR%tdE(B(3lr=;G-3DJ|L+01*((zeWKLw0wLB60JBkv=<`?ZlPQ
zVljvAx@l>1HQ45>X|r*AzYSlBe(+*0$e@q>#*hVVVfZ)Tac#@Anpy#pY0ce!6q!Lf
z|H0Rmwr{kVDBA7c{vkmG<EpV^9w=>?=N`1+2{9kKa{L7KBG`>WXXiTek1?JU9ngub
zuN)A{qbI8-v2J)E7l~GoH7X_e;PTf%XEX7`<-K%31GdIy^PvlzmBs7h-k`tv#C#>L
zfTqhzaYFngkGTj18@lPWlD<zw_U|<d&AZ~2lmH%0hVFtIZ}U$HQz`e!9h5>*J3eaQ
zjKSXH*Nxp@*96+1);^NTk37_W5+B=l2BIV}2e>FMDv}*sq<Xs#xsqy;d$V>bZh3v0
zhwZx$^bQR;7*dG33MJTarAo#1bbJ4KT=Rs3D%vAAKe#+!Iq{s&A5ws&E%A(vd$;Gi
zs!3mofQOJ@<2hjwDI_U{>QOf*f$hDYJHD`TN<3hsAJ#lc#z{Y|apT&5)Vlq_rEIc{
z+o^I){_~9LkI4vJ#2<HX5#_7e-iK_@MNW9}Dqj)Trxb8~+eZ7EdAM-Z6e-u&%yNBO
z`e@rYrNcp$_6s`?8h^QJM&KHd?4xRAAnmF9kGS^O$wveuJ=;C>xTIu0aB_s7PV^<g
z0W3a@mnY65b4i11`p=f<N2qQ!BJ<@&+NkRr`Q0A;e*8h=9PF~L1WM{ST(Pd4k+;pp
z&#q5pB-Ty1V*NEb@e`c0;U+x3Voun&gn}=@*tBUHBTsV0S2nE>*1P^9tvre%YcXr3
z!JX?}AK;LT8H{Alvp6HegOMX=yfb4KQ|~&AKg$SU>c1Jr_cHvL`m&$!gw4|c_ZAM{
zEQK}~r*D3bsSmh~o!-2|)E_@<zW-(o1p|-Z%B+AT3Ron|cFxpW>X%g-;b0}?Hw=p)
zga~=n?c5o`s%{_O$oMr3?^UYk2M!``MCwhzzxPMHtPM}h-oZ#N&cg?@0~txi9DFHz
z79a3ftGI-na$*@t(kpm%&O8ve3LnY|1#u7I_MF9Z;vk;BWjd|y#|c|rU?gn|amAKb
zKzMg--4a8qhjI8@DtJ8;o8DT$NZeR_`>h-BJQ26#PMIR9%rX_KUSrXnx@s*IK@M_x
znWn;y2zF?x)^Z}T6}xQpp>K3y`PM0nB*Yyr-wM*TrQ_nQbAm?B83k~fEcQaGi$M(g
z0gOJ8cq35Y8#)|xx^QZ!SF2FqfmB}yQBa-fAPb*3d=>X@okJ&{#?!YwOW!z!leWb?
zb>kzuE(T?gmVt?NS>KHFrb0;9CnkT0FK+XZ9R84`Q0dIhhvuSAq}nt<cT83e%d|1N
zD*&o%#!qgKrf<~Xl<jlq$u;=k_SDI<iE&a@GxZ<ofz7D8heUITd2S_R$&O`#ZW*gh
zMdQy`WzbpeDPd_<X>@w9Rsm^tR2NC}O@*eSju7_Ij)Ym2P$bU7RXY@n+lh7f?v9nh
zd0-yBAWFy!AH2pL36q34;q5on{zV$42gN8@idhV`QiLBR_RvyB1D`ryX71)w#{D{o
z`}uxCHiK5}=%Y0eMTl8!K$^w1h*8ua=%>UJ94YfH9vO+uw>+uyyYppd-h)%<z)57=
z{5~lxmv1zRW*GegjDCPL%5G#-muqdqyI9KH<pC2Hq3fmjzOxT?bT$rYlzdvVSOk+Q
zVb}`9ES*a;5q>nYXbWPLYZ0I+ak(QAlH;<n)ZERZd{P2a8!4!Rkhyy;5{rt^%cWP#
zX1tg07x+mHB56;fYy@7Hfrpv}W*#)NtPf=BLYk$sX=br6%`txJ2`Hps0wF`0yPK)N
zwQGT4H)VWxCkkBq15CIRo<;DUPknmWWKb!2yujU!NY&BISKWM{7r3)2B=}v``VSl!
zr2;XFVu5=$%#un(;<y4wHOI=vQbf@r3ePWBrLxRuy<A#0QyZvj4*8dMPPyfTWr)<p
zw&=Av7OG*O+|52#Sx?mMrJcN9G~pxt9KCUW1XO_$$W&;t*8R4!OVeD4m@oH1h1h^J
zjo%~Yi;t1!%U;AZ9YJcQxf2ol8OvFsd`^|b?yb8y<q;)<MTrs@2<C-~y&}=KWmk7E
z(D_jdie!}VRUN{yMaU=u1H7W6jGn;Z)gnsxR=;a#0q*N_4b^abU<P5%eOJPZ%p~0M
zz?IA*9uE_=?k4OB+k*|?H(+_tM761qEClM&&LtpzIL&;yoc>+>EZQc13jN<n|Cc3K
z{}s{yAo))hzi;?`Z<2jEZ!>Smr(f0^WnJ16b33jx5A2~)!ZuUDcKb32&L~r1!`PH=
z+iFA$SIds+ak-jL=kKj97i#si*hxp9EVi6*{RxgvPfI@-026{an~6EWjLk>Dn_!p1
zHo97Rxzx6O3Ow@n#_6id1GSNq<;12RjYUpKc%=v|Rg7Zv;>+NDuNG5cVr|c2idc!*
z=A1^D;Kc1?*p)05Stj=6QNpbcUGakluC2RYE)#nflO2Zw??zBp%cMslDQVRJt!ZpP
z4DqTa2QZPl%{1Ututr+bJeB6w2;v#{^Wfk`PA9RPy+?QZ)zZK<JZk0c0*?hw@l^g^
z+A~nAj-;q}s=?vE`5Lc)N#j6TFOU=jAu<N0T?Ik-oN$3@1BeI~m<HlhPop%=HZho{
zAn=Z<G?|w8_2sf}%WMkH_rstIvU>5AA`0IpD}T9+;0XWNGC-@r4${g2x;-N-t164m
zZBGkJuS%Z+R*m0WWv%YH(0QpXZfLbt*V}SCp?_8Hnx6FA8$0tRm<pdQKB+%d45#}j
z|6Qt3_DSYEXs7vmFjg-Z3$_{<OYEhGCENj#$uf#ijFv3Ia$?yBnnni@+MQNwKzgD)
zVplSR_PSasj2F;03(F2%FEy3K=<<Cb1Gz=7%xzuZ>>H|za(4M^zL7tzz1*mqhpNke
ztB{^Jg+7!~<S=SY{L+8d3tgI8CpDs;5w0jfwLHY^`$8O7LK#IR+@=-2=1gf$I>Bxw
zVhOhmx?U|4i%U@8FKa2`4|-US9@MI*q(|0pczjjx7#<G{0N!{&kIZ-Gg7?g!sxx?5
ztF^aMBGRhUc<Jq1!?smzqqnQu*N1JW+K>tgPuMk3r}-MxLR<@6P16Lf2ChYH%QW^v
zpyPqfJCX6=F3Q~VHRL0(H)ze=<HAL)%cbU?9(3NmGxDbwcnIHff!!rsIgU1#iqYNj
zdpatjx}2<k@*)3{j;GkW8ufp4q6I~@6pjNoii1rg0yi4G525bcGNaL%TQ_kvbN3e5
zCkHQXgp1`s_9$#c*F)kG7j*Ot1$V^chFI2#+{pDx(sJJ}O?V{5DB~do=Td5oGL16s
zE97i{br*4x%e$`c%Aa~psk(1)U?L)EfI?c#r2$F*e&ioL@l&#M3R0b@^Vyq?N|mk`
zLG&0e^&dcw-`T{+w${BIJ6uar2uUC@ZM<Gt51QbwE<UDz7Q*k1KEWR<4ieX(Hfo!k
z&nUeqO}G<CJD<`h{T~zdGAHi!T?Ot>viW;V`!4O%Mu38~<Ywc>z9j>~AN3H3^ho%f
zp24r`8KD8_ih#l*c#acrsY6X-63Mq=6G(>r+=Ij?vQtT}_3;#cr>BHJ3h36dDo^99
zdJ4x1=$FebmkF=vX&k4gX(7o!1rtWOtajwaUllNfTRTfQ!ERy*w=f=Y%GR>adBWTQ
z*O$wx1eeQv)B<zbTq^L6A0<5zL`grMO8p+&>2zCk_vt5*oi`-wCDA>hEf4wYkLfkx
zETxHp2p{E3F)z-hAOqj@I{(KwLa!r{1kBTRyhnBQC~WdV%2)xRw<{JXl@fcai;=lY
zK^1tsBgo%-0S+K+L`ylb=Sbelx*f4g>Q-*9YLg8`^)Ky>vFbYGdh#6o^)rj1e6-%U
zW-9bLU!BB*+nTW4_N=O0dTV=nGE8_$E95l{l4%2a{EH`@hoZT%?j|E^7&P(}=(mdT
zvdtBy;(Qq;yQJny+mRwup<-C9^F|kl^(qhlYeTJOYQtb`?WE0Bx2rps4#o7x^(I(X
z_2_z9+Vb2?`eVh<mYgh^Ukr|S$y6w4y_FOJV(`+cQ`&RGwpMMWx3#bH1yL|B{9yvr
z!yrOi;sI&Uk%zwL7+Ls3vECUOdGnBZob0!X%@vq!L_{8dSp!Dq{VH4m0Y;>!jB#Lp
zs35?G5ZAdt1h#`f<fTW%Xqvf&52aPM_Cvl@{t&%i$M}Xn9A2UF?t_z0;lrPG_UWxR
z{wM9asqk-g!z(%*`W~4IKdqg&*+*^9+j)pLG+%#G4?~7pbf8=-DEFqyTY!i~Wm-D7
zDyuz>Sd*DuI1~j(0!w9L+n@U$H&$Fv!fjnAF&EL*oZ?f&WOb%Os`YV`;cK~0YEaT3
zk&;;KhEDqYk%zMzK}mx|D^c17f;kjXl}%GbOBU<#9#f&1FF=Zc-$Rq03e^Y)?z=+3
z_JYj?S|hh9woJ&(EgS^B3@+8Z{sri4@RIgJesH;^^2T>(YK3Zk;ot>MO~mmQ?ll!o
z8-`T^_>y)O3*PYUQKBllrg%f7zTr+V*25oBk9j=N4(2rsErok;a$ytj&;xAUFl5r^
zM~nlPlWAvx=&m<^-y@tpebo&^e|$Bn#u#f{kFIlRZ^G?7M{dgEIpA=K|Ig<2?O9>D
zHlGh$mrT4Kemk;H+@gwOoxskM`i96(;NH6BJ+F;qrZo(bH!^Jt<kO@D*|R$y992Kk
zod08?1$m1L$mTnDAb;6%xB1QhD)53VM~j`KP|E?~wy#F24@`OH8YC6&cUNoKcQg9L
zJZ}<!DO?zd#_^!CK$|P_6`+mEg{R56kbJBA?Aigq(9&ZAkD|1b>X_Wvad<dm!uZO>
zYI5itJ#g0D!(Rt^Lxl`ydF$Z=UX71OblaMew!oqI(O;_tTFMvjd_zh8%a4H5Y}4c1
zyf#<$SNFD9FZ5ixtsA=1d97{L(CYp*z3JAC${s`!5uPp9yr@8$s940jn2MN}vXKSt
zNj2%mox7D0k+oD?oyE(&l@^g+oz7d=zAbEf)pmME`vw6RhWNs!3Oqg2N6q?*Cn-?A
zU#Rl#F4gu2?wZzcsD741j?aRUGKDt2SIV78&A$#K^RK^>GbgmyQT`06?Bjury1PVy
z)^B#JSk@gbin$VMw1Oh1SrQ@QOJlhjU}dS8)zYV3%Bj=4KBH913NN#oe}Gcm?{y<F
z*k~-F%y+i}LCFbqjrndmRp5=UInmV>s;qcdb5R8q$d9B{>mIn@)1}*NXAL;J#<o!_
z6Aw}TLVL+-6cyXT6qKy?Fa^~#geg+4-c?eyqDQ|Pi}=^oQpvzreg+qCllnj{I~^+h
z<_7rn;(PcNqZf_~om>eGwZMN@%aT%d<^VcyMk;gY&sV&^#H&){+t3gG-Va)H%X6gE
zz8w=j8PUvW=<oPx+}(Tn*`Kr&PpXZvZ5uZ<-=y!D#I|Yt8u}@Ja)c0GhPr1zl+QmF
zLCpt;4>&{^SHN1c`&_xh1g!V^Zc^2g+Mk3Ra^%BX9>OUilB@l>f~M@{GN>=1C{bTU
zQlC4t)Mo%KIo%h(!%WJf(Vx)CA@=wke|>BhNPF={pQb4s><hlp1isOnLKEAP<NsCe
zw~lXjUx!~iJRob312FfShqdeo=+SmWA!S`7)RElb*M3B4nyR)P_d!+&i`?<_eAyB>
z{pf6tW<TP8TNYdP!eJ6vNxetvK2k<-H6N6mWR=9m<OKIqJ=sK2+R>lSL%CaBu}32^
zD9Qce+C$_%b}nCnsJ-*cgUfM$BHTceo^B(4GHI@;ZQ++DEyT=Wk&N5`t&x$vQuZlM
zO4=;saQr>Y2YfrXqB7i>Bqi5xLe_T|ej?eR;JzygI#%)S_tox*{gwRsM(&kitn}~A
zd0bmvn@8@WrDtp2E<LYR+U}ZkYHfr8Zlka^^=*7N`31foaOJOc!ZTO@kL`Oi-~8k1
z5}wePOxJbP04;#4p|pJ$=cF|<dB+=ZaQZsZ55F+&6LB~ePIAXJ__Op^%#ClW9O&j3
z&HkEPTDm8o$q2V@fpD=PJD|!rfF@OH9aPB&;3kx08Ot8a&$vmuh1s+05)RRMs((*6
zBr%^VggeZkv-&W&)0{l)(FhJYw19sAsqS{u1@8HKNII64TlOsb3jUg5>>y`LE`QD~
z*|7umnu=6ZBuVEv>N=zP=ahgM2K|eV6@OHCO0BnCTvp1ql60Y(IFA9V?6G`EVsq5a
zYeke&1~GuEa{EXw|8pW@d>aP4YO`Z6*An+8e;op>A6e=T|LSoLM1S<5A6y~5)raQt
zk;8;@<JpdleUFGAQ3{sS7rqUT)Z~#okb0e5_Q-mqGaZIh^(+m^xe}NRt6KQrFb#0s
z2xUd9N!t;}KC0rb3}<Rb%T|)AZPyYI5r$L^ERPhf$7~#iRA2DvYEmf<k+gpp?lwDO
z*+*PS6Z%-aL$VtI)Ezoq7!+#S2Vu)Wl~ax;a*~&G1M<UVkBvB1m|bU1*0nfzJ}aLe
zB%d!2B!4hPKB3ubC9~$5J@+i2LpO|!+y=S_R1fq|drQ9m|DH$RkG8!V@H_7;d|~Iv
z$W)-0bhh>lXbXWH;T>s7pB!33<U66!_k}w16ZjM@d?hU+EhkkH@n&jj%BBsH*x5mH
zoUEHM@dcaAh$XEAp_?PNkGvY?0l;0IB)9!3*h>MnHo@M$lVp27Yj2;j<1X0yeOB4}
zm)qN)?Csy}{e_9P{_pMWL3>+l@851~)yVz@1*kHzGs%A;z9~f54I8p&WaVb0lJDfR
zAvtqhD)eM#C1+)4BJ^fjrYdK8W=<en6_d~CbI^0P=kU~=G*zl(IcP+pO5W&~C0U&+
zNqs9Ld1FdyiX>~3Bw3}}uqh%XIV)ANF?EY%<E9kbTmh;#Hf5%6L;;zbQ~{Z(Z>A-$
z51A#G!#}xv{;XNEpOwqG88Wj{Hf3kc$Vkq51L4p1PxP7p-pEMB;gOLeK)gdEBToRm
z4rBtlZ5$bKsl*TW$Elw<J~A@l*vQC6Xp4c!vnM=nhxT<Kr&ycj{*PKU`afd)7x_jZ
zl<^-{*zncJ$SI)RK$SrIfXKVY>0Nlnjup@0jCbAD?Keh7ege7zbP?$Ge@QKXZvZ+A
z^iQCVfc_3t4O9tK0kjWjH_%R?0-)_cIY8@gjHpLk+Q8&M2<RcaBm@2%>IM8gAR_pm
p7xSNl+kXQW97vc>d@}tPa3P>uKpX8XdG|PxJ_u|-I=oZq_`f`aDVP8N

delta 5317
zcmcJTeOOcH`NyAgPEJCUN-#hKK?4yHL<x#7)ryD<L8^cvASj52*NO$im$lP@LWqb}
z@t(&1aFbaT8(qzoDw|hTYDEjKN?qIiYBx<0L96x9-=vDwX7|ZCNnNj9+i!o2i!b-{
z-1p~syYrmq$ziLV-r7c6f$}yJqLlT;*Q}DUOsSq#orgnIG<69+qiQHKWYc<iD^JKi
zGq>6-G((~D9Y#f+hl|Y8&^A&{@F&<i#6Gqs>5l46MCEdSCVw8wl*rl1@_O2Q!ImJg
zQnY;<Y*f4iG14^elSr|L&79h*G3pJ{0l(cIv9LAS6S}1<J=8OE?iv`m2gIes!Zul<
z!phX>>m~IK29s<!7gzn$-5yI6_V5MYj5TuFF3G%S23mxVc>J8sD~GZ2>m%~At{5>M
z*IaqaTYkmYCe*rU7%^m(!Q@<Vrn!y~s4HCJov>M_GCHTUL_<6XrzK0pdKRaR%Qi@c
z3<q`_5q!5_!Fbl+!W3FyiNtV0M$pnqsbuiEcqa4?3H5jOS-|s)uNZ}>aTTXkr@@$^
zvxYjOYze1rPKMH<(KDTOT@k0XCt-`+h;5v<I(MX$B~9!QaqI$&l6gW;hxxfB@;NBa
zf&U%aHdd``l65$~Zc?@I%QH>g92U_~GebuBwAt9DRFaWXs}pT!Ju|2g_Hau*r?pNQ
z>B*8eKTN8-#wSbN{2D|K>ll3m+e;I?Yi3GG`p)yJ&v$nF{B?UogQbbnrjGr%4U%4n
zg+*Qqsd_l%wT7<tg%OGgDy?EI<sEVdH-TMxpC~5QTWSaHnp<F*;u|kq85rArf^{5;
zqj;Zp)Re<~z6<VfYBI!(I}l7Qz04mlmolR6{Dt9`ndZHk)8-zPlWf1uspI6fHt$n3
zt%!!7`gGG>A+}|{8zi_LKk<(Yux2;OSi<TI1p~zUC`BmJ>0Fbx00IIu2*n2YGipT%
zWCz62{rRvz!1RK1+`g3khBKE{X3&ldi0_|F>ALgc^AG0JCG3hV)#i2l)Nij{q2v0?
z?9M5@*ODae@|Ry|7vq&mmUwXeDL2e!+xC%LsX#?S(-4+ahO1*L$7^E@adP^MzO(+;
z?XVp4de8>VoxPsldcB3K(<{TZF+wkFR)i^|PK6^XS=<I{`}ic&mAZ^NAsU(~L=Iyl
zE&_fR)Sz_EO}9Ysx94%{JT;__Y6#uHr?V*A>>Q&o+tq_EUL>=S^xZvL1p5{VVDBO~
zI86kT5gY<mH<>7siEc7dB<FI9@+!zvyZVe3$yhfTERxfaTnma|7a1dxF>caNBqtzQ
z0&Q+GLL?*H<WP|eK{6N0LtK5TMN;i1iAbuDOaryXMf!=PpPL*INlzpbq03ErilnET
z{7NJ#BxgbO7+0UPNYZZdrbvE^<Rs9By2!^O`PfZ<B9ixz3<JBHd?1n!++>GH+K~)|
zU1ME+_K0MUn>;I$pCaiEabYg<x=3DklQxm;L{bX<Zn8@xyWHeakvzvK@_q)*<7P)W
zH`|fRF2Z<FAlS>CqIn&st}eb-H@2?Rm|^4;U2=Q~hJ}xaQ7jZXmj2oxW6ziM@4Uc6
zjXH$X<+(!a;;#*IwymuH>iI?JwddNh!%Y;c)>fF;+j=AJQC@}olT=r>I=!qvYMZ&x
zW{-TAu4>dx!$X-<?^^5sCH^ftm`CT&p|(`d!Fx*DLp=Q3U4(TdPo(C!i02Qnh<Z$f
zf0KkIh9Pp|od9eqgZ+Bq!5c{3ZQA2QM%MWf{s^x2eE!s!QzZ^lQP^7WQIJw9RfCaD
zoi>G1;KJ6rhVuWC()}={zlD()rd>rbmt<5;dl<!BoJQ4L)KejB)*I(p=29lr@y1Fi
z(_Ta^*s;a0rhNnT@eWX#=*fM5CZJ-O&vz>K7@3?m%msuD2V<y#Q)^%6hoW@+%58y@
z-e-s4%?GAS`}Y|Z!il)~FnM|oeYerJd-`u!8Rk(bJ<@DTh|Qrworlov(Okb*8`CZ!
z{_REy*MDF;U*0q*ezK$B!`Z>I*RYvf9%$>I-ABos%?>|>8*?TI<$^&N9=}kICz59J
zqlX=rp?UgjI2M0imWj<|`efVMxrr3*u)x`$WYAH+2S43*dU*>R(#@BgGk<duj_6{C
z)hFca0JioC-d}AucSBsl1NvqSX!Wnt2YO&s=2Ym``_VhE!4rKX9W@B!5^vB^_rPOb
zCtY>}KAD$6dwl_sNo(k<e}d+uzNjorL4EjD6<Vb{yjisjt>^KN%}deWaI8y(Ryp+8
zRdY7hw^^>hsh6V|#jYT@^Kz4KI{J(SAK*pSR(9K5gsZZ)EVk{NA4<u`5^{EL-<G;x
z+Ac1rq!@)g%l1;rOe~NDcs+HV3}G<!DWEeoNGP`qg9oYSs_@fNvh5USFFT+@1}|>n
zV=(G%c-MToQ{{}_b_Cwy>?sF?EyiC<l(+Ogf7cR)rB+}LKSQEP=%MJTs|UFB$T1-H
zV*HNph5Mf$^&)g5bW$+L*}csCy1*3nSn!2DhU7($!b;Fr-_dK%M_YTL7x%n9#aPoS
z$K7x13#0gfHB%q;KxvwDd779<-LNa|w_eV6^?z2a;<MWDnJsm(A4Q+|4vN#?R4U@;
z8G={^48BHGdVcAb#)D7BQcT$rSd;OPKJf(<XRecB2=}Z4dNPaYl#gu5OSaH4UWX}N
z$vMbeN1int{-E(?@FX-fKmBB|-mvu^QK<-tHTTg)odYLb<(9iP$x=Nf$B@O`x25HR
zZSk@(l+S@Dlup;`oiupHEJnf_VS7%^WU*FsRHHrgr2b@9`oI}HJn-l+XY%ur#qOVL
z`1t_w;=j>2J$*AFJ~!M~D8Go&r-KsnVm@7x=}?_(@OMUvCjGdbUJFliM~@ex6ZaW{
zE~~Jtl!Z+kF_-^JL+K3P_c_NA{4L`lVR>*CGMY0j<M^>PCq?^q>p0<Ie}1M#p<4|e
zD?<L^_~YzV?+UXvjoCk!3N>sTAVOUh0&UAf`H?W^YG>?cu9$ulJY62FamMsP&e(<l
zT4;A^<bH$k1F??)h|8NWIRj^Q_K2UEx2L`ptmTv+&uC8f`8+>UemvayDrn9N<&Op&
z+Xw!b7tN2QnbD#+yJvHPp|_pbK5eI)>INJ?WZmQi>J?LCM*6mk3+NlV-$46Llc@>S
zIAc%j9v=04-@SbI2UsMBuj;0$6pDowBS<eiQzhUOq`jMQXDjmJVY;b8>70n^8FN(T
zO3pKQ&!myzDS&S;gV1X->zw6w?pCh!+kw_i>0h`0kb2G0OAnljJ=iMP(=GSk=rHP4
zm=L@YzBVS9o#)BzdvJd1EZH<Z1$_k|t$#}>>kT$*eS=gvg&(efHKWC^q7>KV^#GE0
zwKL7LZQ$3qijRZQ$f=y1v7hTY@j3jWF%7a-Y-JP*IrOa9!zl8KVdKgIv?0*5@;c4E
z32lZiu`0D4%3naSq`boSeVCXZ;^BM~P}t{yx-e5|J$F^p{5F}_3T!`(nX#Vx0=5-S
z7)cZbFMh3wlssXR44o3m5u;LC`yHOoit1T#tuUIgp8FD{MNy2ksvD*kg)!FI@59QX
zaD1}I!;T^i+DLe}=$DN3<{x2k@m<Ec{4HBtNehJyx58JiL@fw)rZ{b4J!f^)HsL#v
zQidN9p0W61vdH<xzQ3y5yPXNU@T^g9pdU$8&KB%K<Tw8#e=!9LS8ZZQYAN)tn#_>?
zVhAjamLZSXoCAwX)6vJm@zNJ@x+b_&ItQm)1Cgr}Y3?ShUmZz%{S^+ap2d*7HPEv<
zjUfs>%y@MX?bQuCUNxY51w4FpCPQ{jgGpsKWh5`fQcHcbd!HXnESCinZJ4Fju#_ct
z&mA#R3790J7;CA$mB2nt#)NXeg^cnLx~vmkFAru&TLS#594A>G1fP^o_1k%*NsjM-
z+x&^4D~4f@Vrwh+0jMhi>8P_1TQQa94#4_~Np#r(uv9Ff%gpe7MF4$b4+N|Up`-Rf
z?3zG2<v1)`lS-Fuhj-RYrB5_K@0x<qLc0DmvHo|M;uEfvJrz=1_c6RunZgje54=|y
zq$KuIORdFpD~|nsQ+9MSN9?QMex;5f>QNB0Hb)tbsjM&ggHrmF@2>OjT*R(}Lu-p|
zJ&lDDy05}EfA4EF)12}cKHL|?G>>kCJNq{HH&@jjET`8d8N2i2OAeOMujuezTbDJ^
zYKuO0Rbq=f)+T|}rjdTp(KDt@#$W!w4E#^hx>B`zlFhGqCOv19!*K`o0M&;2y=eLJ
zKdZa^F8gp3>^?Yq);@=03~K&f!4{*fMR}l)w|q>CmKR^<<?`3=wGDggH0`@kw;)}e
zR+3P%zCfM+YH7iW%Ho22nA0>qaF#G@BH^uCtf0~ECDjP{R87|k|3R4_CD?4y1}qoq
z38Eb?a#zH-WtkBFi)iz6g!*wY?wKppmx*?aXt#;+je=zfUx1A*fgxLtI~?8bI2`v;
z$-i+pGEj$5|A*2Zb2t{CfYU7*RT*a;j=VDt$0@YeP<%ZX>le@-LhViy2L3PED)L|I
z`2X4OC_*0pixtB5w?|Y(bmBHajY5q;Y5zkFN8S@9MG@4K4u|6*>H+EwsvGqe)MuzJ
zR43{J>MZKr4o8(^F*Zs@C8FX{e1rc)FJYUhD1PEUUd+Fn+>H)6XvvPe(t~qC?L%2m
uze4f8=XDV4{38KN-kv_r<1Q}r4nA9GJyE>neb0;cInM_?8aj4cJ^l{rCK>_&

diff --git a/roms/Makefile b/roms/Makefile
index 775c963..6cf07d3 100644
--- a/roms/Makefile
+++ b/roms/Makefile
@@ -182,8 +182,8 @@ opensbi64-virt:
 opensbi64-sifive_u:
 	$(MAKE) -C opensbi \
 		CROSS_COMPILE=$(riscv64_cross_prefix) \
-		PLATFORM="qemu/sifive_u"
-	cp opensbi/build/platform/qemu/sifive_u/firmware/fw_jump.bin ../pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin
+		PLATFORM="sifive/fu540"
+	cp opensbi/build/platform/sifive/fu540/firmware/fw_jump.bin ../pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin
 
 clean:
 	rm -rf seabios/.config seabios/out seabios/builds
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 24/28] riscv: sifive: Implement a model for SiFive FU540 OTP
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (21 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 23/28] riscv: roms: Update default bios for sifive_u machine Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-22 22:41   ` Alistair Francis
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 25/28] riscv: sifive_u: Instantiate OTP memory with a serial number Bin Meng
                   ` (3 subsequent siblings)
  26 siblings, 1 reply; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

This implements a simple model for SiFive FU540 OTP (One-Time
Programmable) Memory interface, primarily for reading out the
stored serial number from the first 1 KiB of the 16 KiB OTP
memory reserved by SiFive for internal use.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

---

Changes in v4:
- prefix all macros/variables/functions with SIFIVE_U/sifive_u
  in the sifive_u_otp driver

Changes in v3: None
Changes in v2: None

 hw/riscv/Makefile.objs          |   1 +
 hw/riscv/sifive_u_otp.c         | 194 ++++++++++++++++++++++++++++++++++++++++
 include/hw/riscv/sifive_u_otp.h |  90 +++++++++++++++++++
 3 files changed, 285 insertions(+)
 create mode 100644 hw/riscv/sifive_u_otp.c
 create mode 100644 include/hw/riscv/sifive_u_otp.h

diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs
index b95bbd5..fc3c6dd 100644
--- a/hw/riscv/Makefile.objs
+++ b/hw/riscv/Makefile.objs
@@ -8,6 +8,7 @@ obj-$(CONFIG_SIFIVE) += sifive_gpio.o
 obj-$(CONFIG_SIFIVE) += sifive_plic.o
 obj-$(CONFIG_SIFIVE) += sifive_test.o
 obj-$(CONFIG_SIFIVE_U) += sifive_u.o
+obj-$(CONFIG_SIFIVE_U) += sifive_u_otp.o
 obj-$(CONFIG_SIFIVE_U) += sifive_u_prci.o
 obj-$(CONFIG_SIFIVE) += sifive_uart.o
 obj-$(CONFIG_SPIKE) += spike.o
diff --git a/hw/riscv/sifive_u_otp.c b/hw/riscv/sifive_u_otp.c
new file mode 100644
index 0000000..de8801c
--- /dev/null
+++ b/hw/riscv/sifive_u_otp.c
@@ -0,0 +1,194 @@
+/*
+ * QEMU SiFive U OTP (One-Time Programmable) Memory interface
+ *
+ * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Simple model of the OTP to emulate register reads made by the SDK BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "qemu/module.h"
+#include "target/riscv/cpu.h"
+#include "hw/riscv/sifive_u_otp.h"
+
+static uint64_t sifive_u_otp_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    SiFiveUOTPState *s = opaque;
+
+    switch (addr) {
+    case SIFIVE_U_OTP_PA:
+        return s->pa;
+    case SIFIVE_U_OTP_PAIO:
+        return s->paio;
+    case SIFIVE_U_OTP_PAS:
+        return s->pas;
+    case SIFIVE_U_OTP_PCE:
+        return s->pce;
+    case SIFIVE_U_OTP_PCLK:
+        return s->pclk;
+    case SIFIVE_U_OTP_PDIN:
+        return s->pdin;
+    case SIFIVE_U_OTP_PDOUT:
+        if ((s->pce & SIFIVE_U_OTP_PCE_EN) &&
+            (s->pdstb & SIFIVE_U_OTP_PDSTB_EN) &&
+            (s->ptrim & SIFIVE_U_OTP_PTRIM_EN)) {
+            return s->fuse[s->pa & SIFIVE_U_OTP_PA_MASK];
+        } else {
+            return 0xff;
+        }
+    case SIFIVE_U_OTP_PDSTB:
+        return s->pdstb;
+    case SIFIVE_U_OTP_PPROG:
+        return s->pprog;
+    case SIFIVE_U_OTP_PTC:
+        return s->ptc;
+    case SIFIVE_U_OTP_PTM:
+        return s->ptm;
+    case SIFIVE_U_OTP_PTM_REP:
+        return s->ptm_rep;
+    case SIFIVE_U_OTP_PTR:
+        return s->ptr;
+    case SIFIVE_U_OTP_PTRIM:
+        return s->ptrim;
+    case SIFIVE_U_OTP_PWE:
+        return s->pwe;
+    }
+
+    hw_error("%s: read: addr=0x%x\n", __func__, (int)addr);
+    return 0;
+}
+
+static void sifive_u_otp_write(void *opaque, hwaddr addr,
+                               uint64_t val64, unsigned int size)
+{
+    SiFiveUOTPState *s = opaque;
+
+    switch (addr) {
+    case SIFIVE_U_OTP_PA:
+        s->pa = (uint32_t) val64 & SIFIVE_U_OTP_PA_MASK;
+        break;
+    case SIFIVE_U_OTP_PAIO:
+        s->paio = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PAS:
+        s->pas = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PCE:
+        s->pce = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PCLK:
+        s->pclk = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PDIN:
+        s->pdin = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PDOUT:
+        /* read-only */
+        break;
+    case SIFIVE_U_OTP_PDSTB:
+        s->pdstb = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PPROG:
+        s->pprog = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PTC:
+        s->ptc = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PTM:
+        s->ptm = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PTM_REP:
+        s->ptm_rep = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PTR:
+        s->ptr = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PTRIM:
+        s->ptrim = (uint32_t) val64;
+        break;
+    case SIFIVE_U_OTP_PWE:
+        s->pwe = (uint32_t) val64;
+        break;
+    default:
+        hw_error("%s: bad write: addr=0x%x v=0x%x\n",
+                 __func__, (int)addr, (int)val64);
+    }
+}
+
+static const MemoryRegionOps sifive_u_otp_ops = {
+    .read = sifive_u_otp_read,
+    .write = sifive_u_otp_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4
+    }
+};
+
+static Property sifive_u_otp_properties[] = {
+    DEFINE_PROP_UINT32("serial", SiFiveUOTPState, serial, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void sifive_u_otp_realize(DeviceState *dev, Error **errp)
+{
+    SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
+
+    memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_u_otp_ops, s,
+                          TYPE_SIFIVE_U_OTP, SIFIVE_U_OTP_REG_SIZE);
+    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
+
+    /* Initialize all fuses' initial value to 0xFFs */
+    memset(s->fuse, 0xff, sizeof(s->fuse));
+
+    /* Make a valid content of serial number */
+    s->fuse[SIFIVE_U_OTP_SERIAL_ADDR] = s->serial;
+    s->fuse[SIFIVE_U_OTP_SERIAL_ADDR + 1] = ~(s->serial);
+}
+
+static void sifive_u_otp_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->props = sifive_u_otp_properties;
+    dc->realize = sifive_u_otp_realize;
+}
+
+static const TypeInfo sifive_u_otp_info = {
+    .name          = TYPE_SIFIVE_U_OTP,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(SiFiveUOTPState),
+    .class_init    = sifive_u_otp_class_init,
+};
+
+static void sifive_u_otp_register_types(void)
+{
+    type_register_static(&sifive_u_otp_info);
+}
+
+type_init(sifive_u_otp_register_types)
+
+
+/* Create OTP device */
+DeviceState *sifive_u_otp_create(hwaddr addr, uint32_t serial)
+{
+    DeviceState *dev = qdev_create(NULL, TYPE_SIFIVE_U_OTP);
+    qdev_prop_set_uint32(dev, "serial", serial);
+    qdev_init_nofail(dev);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
+
+    return dev;
+}
diff --git a/include/hw/riscv/sifive_u_otp.h b/include/hw/riscv/sifive_u_otp.h
new file mode 100644
index 0000000..7eac661
--- /dev/null
+++ b/include/hw/riscv/sifive_u_otp.h
@@ -0,0 +1,90 @@
+/*
+ * QEMU SiFive U OTP (One-Time Programmable) Memory interface
+ *
+ * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_SIFIVE_U_OTP_H
+#define HW_SIFIVE_U_OTP_H
+
+enum {
+    SIFIVE_U_OTP_PA         = 0x00,
+    SIFIVE_U_OTP_PAIO       = 0x04,
+    SIFIVE_U_OTP_PAS        = 0x08,
+    SIFIVE_U_OTP_PCE        = 0x0C,
+    SIFIVE_U_OTP_PCLK       = 0x10,
+    SIFIVE_U_OTP_PDIN       = 0x14,
+    SIFIVE_U_OTP_PDOUT      = 0x18,
+    SIFIVE_U_OTP_PDSTB      = 0x1C,
+    SIFIVE_U_OTP_PPROG      = 0x20,
+    SIFIVE_U_OTP_PTC        = 0x24,
+    SIFIVE_U_OTP_PTM        = 0x28,
+    SIFIVE_U_OTP_PTM_REP    = 0x2C,
+    SIFIVE_U_OTP_PTR        = 0x30,
+    SIFIVE_U_OTP_PTRIM      = 0x34,
+    SIFIVE_U_OTP_PWE        = 0x38
+};
+
+enum {
+    SIFIVE_U_OTP_PCE_EN     = (1 << 0)
+};
+
+enum {
+    SIFIVE_U_OTP_PDSTB_EN   = (1 << 0)
+};
+
+enum {
+    SIFIVE_U_OTP_PTRIM_EN   = (1 << 0)
+};
+
+#define SIFIVE_U_OTP_PA_MASK        0xfff
+#define SIFIVE_U_OTP_NUM_FUSES      0x1000
+#define SIFIVE_U_OTP_SERIAL_ADDR    0xfc
+
+#define SIFIVE_U_OTP_REG_SIZE       0x1000
+
+#define TYPE_SIFIVE_U_OTP           "riscv.sifive.u.otp"
+
+#define SIFIVE_U_OTP(obj) \
+    OBJECT_CHECK(SiFiveUOTPState, (obj), TYPE_SIFIVE_U_OTP)
+
+typedef struct SiFiveUOTPState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion mmio;
+    uint32_t pa;
+    uint32_t paio;
+    uint32_t pas;
+    uint32_t pce;
+    uint32_t pclk;
+    uint32_t pdin;
+    uint32_t pdstb;
+    uint32_t pprog;
+    uint32_t ptc;
+    uint32_t ptm;
+    uint32_t ptm_rep;
+    uint32_t ptr;
+    uint32_t ptrim;
+    uint32_t pwe;
+    uint32_t fuse[SIFIVE_U_OTP_NUM_FUSES];
+    /* config */
+    uint32_t serial;
+} SiFiveUOTPState;
+
+DeviceState *sifive_u_otp_create(hwaddr addr, uint32_t serial);
+
+#endif /* HW_SIFIVE_U_OTP_H */
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 25/28] riscv: sifive_u: Instantiate OTP memory with a serial number
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (22 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 24/28] riscv: sifive: Implement a model for SiFive FU540 OTP Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 26/28] riscv: sifive_u: Fix broken GEM support Bin Meng
                   ` (2 subsequent siblings)
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

This adds an OTP memory with a given serial number to the sifive_u
machine. With such support, the upstream U-Boot for sifive_fu540
boots out of the box on the sifive_u machine.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c         | 5 +++++
 include/hw/riscv/sifive_u.h | 1 +
 2 files changed, 6 insertions(+)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 8f16028..d66a7e8 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -10,6 +10,7 @@
  * 1) CLINT (Core Level Interruptor)
  * 2) PLIC (Platform Level Interrupt Controller)
  * 3) PRCI (Power, Reset, Clock, Interrupt)
+ * 4) OTP (One-Time Programmable) memory with stored serial number
  *
  * This board currently generates devicetree dynamically that indicates at least
  * two harts and up to five harts.
@@ -44,6 +45,7 @@
 #include "hw/riscv/sifive_clint.h"
 #include "hw/riscv/sifive_uart.h"
 #include "hw/riscv/sifive_u.h"
+#include "hw/riscv/sifive_u_otp.h"
 #include "hw/riscv/sifive_u_prci.h"
 #include "hw/riscv/boot.h"
 #include "chardev/char.h"
@@ -66,10 +68,12 @@ static const struct MemmapEntry {
     [SIFIVE_U_PRCI] =     { 0x10000000,     0x1000 },
     [SIFIVE_U_UART0] =    { 0x10010000,     0x1000 },
     [SIFIVE_U_UART1] =    { 0x10011000,     0x1000 },
+    [SIFIVE_U_OTP] =      { 0x10070000,     0x1000 },
     [SIFIVE_U_DRAM] =     { 0x80000000,        0x0 },
     [SIFIVE_U_GEM] =      { 0x100900FC,     0x2000 },
 };
 
+#define SIFIVE_OTP_SERIAL   1
 #define GEM_REVISION        0x10070109
 
 static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
@@ -503,6 +507,7 @@ static void riscv_sifive_u_soc_realize(DeviceState *dev, Error **errp)
         memmap[SIFIVE_U_CLINT].size, ms->smp.cpus,
         SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE);
     sifive_u_prci_create(memmap[SIFIVE_U_PRCI].base);
+    sifive_u_otp_create(memmap[SIFIVE_U_OTP].base, SIFIVE_OTP_SERIAL);
 
     for (i = 0; i < SIFIVE_U_PLIC_NUM_SOURCES; i++) {
         plic_gpios[i] = qdev_get_gpio_in(DEVICE(s->plic), i);
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 9acb69e..0362121 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -57,6 +57,7 @@ enum {
     SIFIVE_U_PRCI,
     SIFIVE_U_UART0,
     SIFIVE_U_UART1,
+    SIFIVE_U_OTP,
     SIFIVE_U_DRAM,
     SIFIVE_U_GEM
 };
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 26/28] riscv: sifive_u: Fix broken GEM support
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (23 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 25/28] riscv: sifive_u: Instantiate OTP memory with a serial number Bin Meng
@ 2019-08-19  5:11 ` Bin Meng
  2019-08-19  5:12 ` [Qemu-devel] [PATCH v4 27/28] riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet Bin Meng
  2019-08-19  5:12 ` [Qemu-devel] [PATCH v4 28/28] riscv: sifive_u: Update model and compatible strings in device tree Bin Meng
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:11 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

At present the GEM support in sifive_u machine is seriously broken.
The GEM block register base was set to a weird number (0x100900FC),
which for no way could work with the cadence_gem model in QEMU.

Not like other GEM variants, the FU540-specific GEM has a management
block to control 10/100/1000Mbps link speed changes, that is mapped
to 0x100a0000. We can simply map it into MMIO space without special
handling using create_unimplemented_device().

Update the GEM node compatible string to use the official name used
by the upstream Linux kernel, and add the management block reg base
& size to the <reg> property encoding.

Tested with upstream U-Boot and Linux kernel MACB drivers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

---

Changes in v4: None
Changes in v3: None
Changes in v2:
- use create_unimplemented_device() to create the GEM management
  block instead of sifive_mmio_emulate()
- add "phy-handle" property to the ethernet node

 hw/riscv/sifive_u.c         | 21 +++++++++++++++++----
 include/hw/riscv/sifive_u.h |  3 ++-
 2 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index d66a7e8..7a370e9 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -3,6 +3,7 @@
  *
  * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
  * Copyright (c) 2017 SiFive, Inc.
+ * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
  *
  * Provides a board compatible with the SiFive Freedom U SDK:
  *
@@ -11,6 +12,7 @@
  * 2) PLIC (Platform Level Interrupt Controller)
  * 3) PRCI (Power, Reset, Clock, Interrupt)
  * 4) OTP (One-Time Programmable) memory with stored serial number
+ * 5) GEM (Gigabit Ethernet Controller) and management block
  *
  * This board currently generates devicetree dynamically that indicates at least
  * two harts and up to five harts.
@@ -39,6 +41,7 @@
 #include "hw/sysbus.h"
 #include "hw/char/serial.h"
 #include "hw/cpu/cluster.h"
+#include "hw/misc/unimp.h"
 #include "target/riscv/cpu.h"
 #include "hw/riscv/riscv_hart.h"
 #include "hw/riscv/sifive_plic.h"
@@ -70,7 +73,8 @@ static const struct MemmapEntry {
     [SIFIVE_U_UART1] =    { 0x10011000,     0x1000 },
     [SIFIVE_U_OTP] =      { 0x10070000,     0x1000 },
     [SIFIVE_U_DRAM] =     { 0x80000000,        0x0 },
-    [SIFIVE_U_GEM] =      { 0x100900FC,     0x2000 },
+    [SIFIVE_U_GEM] =      { 0x10090000,     0x2000 },
+    [SIFIVE_U_GEM_MGMT] = { 0x100a0000,     0x1000 },
 };
 
 #define SIFIVE_OTP_SERIAL   1
@@ -87,7 +91,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     char ethclk_names[] = "pclk\0hclk";
     uint32_t plic_phandle, prci_phandle, ethclk_phandle, phandle = 1;
     uint32_t uartclk_phandle;
-    uint32_t hfclk_phandle, rtcclk_phandle;
+    uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
 
     fdt = s->fdt = create_device_tree(&s->fdt_size);
     if (!fdt) {
@@ -257,15 +261,20 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     ethclk_phandle = qemu_fdt_get_phandle(fdt, nodename);
     g_free(nodename);
 
+    phy_phandle = phandle++;
     nodename = g_strdup_printf("/soc/ethernet@%lx",
         (long)memmap[SIFIVE_U_GEM].base);
     qemu_fdt_add_subnode(fdt, nodename);
-    qemu_fdt_setprop_string(fdt, nodename, "compatible", "cdns,macb");
+    qemu_fdt_setprop_string(fdt, nodename, "compatible",
+        "sifive,fu540-c000-gem");
     qemu_fdt_setprop_cells(fdt, nodename, "reg",
         0x0, memmap[SIFIVE_U_GEM].base,
-        0x0, memmap[SIFIVE_U_GEM].size);
+        0x0, memmap[SIFIVE_U_GEM].size,
+        0x0, memmap[SIFIVE_U_GEM_MGMT].base,
+        0x0, memmap[SIFIVE_U_GEM_MGMT].size);
     qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
     qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii");
+    qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle);
     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
@@ -279,6 +288,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0",
         (long)memmap[SIFIVE_U_GEM].base);
     qemu_fdt_add_subnode(fdt, nodename);
+    qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle);
     qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
     g_free(nodename);
 
@@ -527,6 +537,9 @@ static void riscv_sifive_u_soc_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_GEM].base);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0,
                        plic_gpios[SIFIVE_U_GEM_IRQ]);
+
+    create_unimplemented_device("riscv.sifive.u.gem-mgmt",
+        memmap[SIFIVE_U_GEM_MGMT].base, memmap[SIFIVE_U_GEM_MGMT].size);
 }
 
 static void riscv_sifive_u_machine_init(MachineClass *mc)
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 0362121..cba29e1 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -59,7 +59,8 @@ enum {
     SIFIVE_U_UART1,
     SIFIVE_U_OTP,
     SIFIVE_U_DRAM,
-    SIFIVE_U_GEM
+    SIFIVE_U_GEM,
+    SIFIVE_U_GEM_MGMT
 };
 
 enum {
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 27/28] riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (24 preceding siblings ...)
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 26/28] riscv: sifive_u: Fix broken GEM support Bin Meng
@ 2019-08-19  5:12 ` Bin Meng
  2019-08-22 22:39   ` Alistair Francis
  2019-08-19  5:12 ` [Qemu-devel] [PATCH v4 28/28] riscv: sifive_u: Update model and compatible strings in device tree Bin Meng
  26 siblings, 1 reply; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:12 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

In the past we did not have a model for PRCI, hence two handcrafted
clock nodes ("/soc/ethclk" and "/soc/uartclk") were created for the
purpose of supplying hard-coded clock frequencies. But now since we
have added the PRCI support in QEMU, we don't need them any more.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

---

Changes in v4:
- new patch to remove handcrafted clock nodes for UART and ethernet

Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c         | 24 +-----------------------
 include/hw/riscv/sifive_u.h |  3 +--
 2 files changed, 2 insertions(+), 25 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 7a370e9..7d9fb3a 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -89,8 +89,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     uint32_t *cells;
     char *nodename;
     char ethclk_names[] = "pclk\0hclk";
-    uint32_t plic_phandle, prci_phandle, ethclk_phandle, phandle = 1;
-    uint32_t uartclk_phandle;
+    uint32_t plic_phandle, prci_phandle, phandle = 1;
     uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
 
     fdt = s->fdt = create_device_tree(&s->fdt_size);
@@ -250,17 +249,6 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     g_free(cells);
     g_free(nodename);
 
-    ethclk_phandle = phandle++;
-    nodename = g_strdup_printf("/soc/ethclk");
-    qemu_fdt_add_subnode(fdt, nodename);
-    qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
-    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
-    qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
-        SIFIVE_U_GEM_CLOCK_FREQ);
-    qemu_fdt_setprop_cell(fdt, nodename, "phandle", ethclk_phandle);
-    ethclk_phandle = qemu_fdt_get_phandle(fdt, nodename);
-    g_free(nodename);
-
     phy_phandle = phandle++;
     nodename = g_strdup_printf("/soc/ethernet@%lx",
         (long)memmap[SIFIVE_U_GEM].base);
@@ -292,16 +280,6 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
     qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
     g_free(nodename);
 
-    uartclk_phandle = phandle++;
-    nodename = g_strdup_printf("/soc/uartclk");
-    qemu_fdt_add_subnode(fdt, nodename);
-    qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
-    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
-    qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 3686400);
-    qemu_fdt_setprop_cell(fdt, nodename, "phandle", uartclk_phandle);
-    uartclk_phandle = qemu_fdt_get_phandle(fdt, nodename);
-    g_free(nodename);
-
     nodename = g_strdup_printf("/soc/serial@%lx",
         (long)memmap[SIFIVE_U_UART0].base);
     qemu_fdt_add_subnode(fdt, nodename);
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index cba29e1..8880f9c 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -72,8 +72,7 @@ enum {
 enum {
     SIFIVE_U_CLOCK_FREQ = 1000000000,
     SIFIVE_U_HFCLK_FREQ = 33333333,
-    SIFIVE_U_RTCCLK_FREQ = 1000000,
-    SIFIVE_U_GEM_CLOCK_FREQ = 125000000
+    SIFIVE_U_RTCCLK_FREQ = 1000000
 };
 
 #define SIFIVE_U_MANAGEMENT_CPU_COUNT   1
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [Qemu-devel] [PATCH v4 28/28] riscv: sifive_u: Update model and compatible strings in device tree
  2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
                   ` (25 preceding siblings ...)
  2019-08-19  5:12 ` [Qemu-devel] [PATCH v4 27/28] riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet Bin Meng
@ 2019-08-19  5:12 ` Bin Meng
  26 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-19  5:12 UTC (permalink / raw)
  To: Alistair Francis, Palmer Dabbelt, qemu-devel, qemu-riscv

This updates model and compatible strings to use the same strings
as used in the Linux kernel device tree (hifive-unleashed-a00.dts).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 7d9fb3a..c5cc4bd 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -98,8 +98,9 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
         exit(1);
     }
 
-    qemu_fdt_setprop_string(fdt, "/", "model", "ucbbar,spike-bare,qemu");
-    qemu_fdt_setprop_string(fdt, "/", "compatible", "ucbbar,spike-bare-dev");
+    qemu_fdt_setprop_string(fdt, "/", "model", "SiFive HiFive Unleashed A00");
+    qemu_fdt_setprop_string(fdt, "/", "compatible",
+                            "sifive,hifive-unleashed-a00");
     qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
     qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
 
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* Re: [Qemu-devel] [PATCH v4 05/28] riscv: roms: Remove executable attribute of opensbi images
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 05/28] riscv: roms: Remove executable attribute of opensbi images Bin Meng
@ 2019-08-19 20:08   ` Alistair Francis
  0 siblings, 0 replies; 36+ messages in thread
From: Alistair Francis @ 2019-08-19 20:08 UTC (permalink / raw)
  To: Bin Meng
  Cc: open list:RISC-V, Palmer Dabbelt, Alistair Francis,
	qemu-devel@nongnu.org Developers

On Sun, Aug 18, 2019 at 10:15 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> Like other binary files, the executable attribute of opensbi images
> should not be set.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

>
> ---
>
> Changes in v4:
> - new patch to remove executable attribute of opensbi images
>
> Changes in v3: None
> Changes in v2: None
>
>  pc-bios/opensbi-riscv32-virt-fw_jump.bin     | Bin
>  pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin | Bin
>  pc-bios/opensbi-riscv64-virt-fw_jump.bin     | Bin
>  3 files changed, 0 insertions(+), 0 deletions(-)
>  mode change 100755 => 100644 pc-bios/opensbi-riscv32-virt-fw_jump.bin
>  mode change 100755 => 100644 pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin
>  mode change 100755 => 100644 pc-bios/opensbi-riscv64-virt-fw_jump.bin
>
> diff --git a/pc-bios/opensbi-riscv32-virt-fw_jump.bin b/pc-bios/opensbi-riscv32-virt-fw_jump.bin
> old mode 100755
> new mode 100644
> diff --git a/pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin b/pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin
> old mode 100755
> new mode 100644
> diff --git a/pc-bios/opensbi-riscv64-virt-fw_jump.bin b/pc-bios/opensbi-riscv64-virt-fw_jump.bin
> old mode 100755
> new mode 100644
> --
> 2.7.4
>
>


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [Qemu-devel] [PATCH v4 17/28] riscv: sifive: Implement PRCI model for FU540
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 17/28] riscv: sifive: Implement PRCI model for FU540 Bin Meng
@ 2019-08-19 20:21   ` Alistair Francis
  0 siblings, 0 replies; 36+ messages in thread
From: Alistair Francis @ 2019-08-19 20:21 UTC (permalink / raw)
  To: Bin Meng
  Cc: open list:RISC-V, Palmer Dabbelt, Alistair Francis,
	qemu-devel@nongnu.org Developers

 On Sun, Aug 18, 2019 at 10:30 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> This adds a simple PRCI model for FU540 (sifive_u). It has different
> register layout from the existing PRCI model for FE310 (sifive_e).
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
>
> ---
>
> Changes in v4:
> - prefix all macros/variables/functions with SIFIVE_U/sifive_u
>   in the sifive_u_prci driver
>
> Changes in v3: None
> Changes in v2: None
>
>  hw/riscv/Makefile.objs           |   1 +
>  hw/riscv/sifive_u_prci.c         | 165 +++++++++++++++++++++++++++++++++++++++
>  include/hw/riscv/sifive_u_prci.h |  90 +++++++++++++++++++++
>  3 files changed, 256 insertions(+)
>  create mode 100644 hw/riscv/sifive_u_prci.c
>  create mode 100644 include/hw/riscv/sifive_u_prci.h
>
> diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs
> index c859697..b95bbd5 100644
> --- a/hw/riscv/Makefile.objs
> +++ b/hw/riscv/Makefile.objs
> @@ -8,6 +8,7 @@ obj-$(CONFIG_SIFIVE) += sifive_gpio.o
>  obj-$(CONFIG_SIFIVE) += sifive_plic.o
>  obj-$(CONFIG_SIFIVE) += sifive_test.o
>  obj-$(CONFIG_SIFIVE_U) += sifive_u.o
> +obj-$(CONFIG_SIFIVE_U) += sifive_u_prci.o
>  obj-$(CONFIG_SIFIVE) += sifive_uart.o
>  obj-$(CONFIG_SPIKE) += spike.o
>  obj-$(CONFIG_RISCV_VIRT) += virt.o
> diff --git a/hw/riscv/sifive_u_prci.c b/hw/riscv/sifive_u_prci.c
> new file mode 100644
> index 0000000..578c643
> --- /dev/null
> +++ b/hw/riscv/sifive_u_prci.c
> @@ -0,0 +1,165 @@
> +/*
> + * QEMU SiFive U PRCI (Power, Reset, Clock, Interrupt)
> + *
> + * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
> + *
> + * Simple model of the PRCI to emulate register reads made by the SDK BSP
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/sysbus.h"
> +#include "qemu/module.h"
> +#include "target/riscv/cpu.h"
> +#include "hw/riscv/sifive_u_prci.h"
> +
> +static uint64_t sifive_u_prci_read(void *opaque, hwaddr addr, unsigned int size)
> +{
> +    SiFiveUPRCIState *s = opaque;
> +
> +    switch (addr) {
> +    case SIFIVE_U_PRCI_HFXOSCCFG:
> +        return s->hfxosccfg;
> +    case SIFIVE_U_PRCI_COREPLLCFG0:
> +        return s->corepllcfg0;
> +    case SIFIVE_U_PRCI_DDRPLLCFG0:
> +        return s->ddrpllcfg0;
> +    case SIFIVE_U_PRCI_DDRPLLCFG1:
> +        return s->ddrpllcfg1;
> +    case SIFIVE_U_PRCI_GEMGXLPLLCFG0:
> +        return s->gemgxlpllcfg0;
> +    case SIFIVE_U_PRCI_GEMGXLPLLCFG1:
> +        return s->gemgxlpllcfg1;
> +    case SIFIVE_U_PRCI_CORECLKSEL:
> +        return s->coreclksel;
> +    case SIFIVE_U_PRCI_DEVICESRESET:
> +        return s->devicesreset;
> +    case SIFIVE_U_PRCI_CLKMUXSTATUS:
> +        return s->clkmuxstatus;
> +    }
> +
> +    hw_error("%s: read: addr=0x%x\n", __func__, (int)addr);

This should be: qemu_log_mask(LOG_GUEST_ERROR,... instead.

> +    return 0;
> +}
> +
> +static void sifive_u_prci_write(void *opaque, hwaddr addr,
> +                                uint64_t val64, unsigned int size)
> +{
> +    SiFiveUPRCIState *s = opaque;
> +
> +    switch (addr) {
> +    case SIFIVE_U_PRCI_HFXOSCCFG:
> +        s->hfxosccfg = (uint32_t) val64;
> +        /* OSC stays ready */
> +        s->hfxosccfg |= SIFIVE_U_PRCI_HFXOSCCFG_RDY;
> +        break;
> +    case SIFIVE_U_PRCI_COREPLLCFG0:
> +        s->corepllcfg0 = (uint32_t) val64;
> +        /* internal feedback */
> +        s->corepllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_FSE;
> +        /* PLL stays locked */
> +        s->corepllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_LOCK;
> +        break;
> +    case SIFIVE_U_PRCI_DDRPLLCFG0:
> +        s->ddrpllcfg0 = (uint32_t) val64;
> +        /* internal feedback */
> +        s->ddrpllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_FSE;
> +        /* PLL stays locked */
> +        s->ddrpllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_LOCK;
> +        break;
> +    case SIFIVE_U_PRCI_DDRPLLCFG1:
> +        s->ddrpllcfg1 = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_PRCI_GEMGXLPLLCFG0:
> +        s->gemgxlpllcfg0 = (uint32_t) val64;
> +         /* internal feedback */
> +        s->gemgxlpllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_FSE;
> +       /* PLL stays locked */
> +        s->gemgxlpllcfg0 |= SIFIVE_U_PRCI_PLLCFG0_LOCK;
> +        break;
> +    case SIFIVE_U_PRCI_GEMGXLPLLCFG1:
> +        s->gemgxlpllcfg1 = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_PRCI_CORECLKSEL:
> +        s->coreclksel = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_PRCI_DEVICESRESET:
> +        s->devicesreset = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_PRCI_CLKMUXSTATUS:
> +        s->clkmuxstatus = (uint32_t) val64;

Maybe it's worth creating a 32-bit val variable and using that instead
of casting everywhere.

> +        break;
> +    default:
> +        hw_error("%s: bad write: addr=0x%x v=0x%x\n",
> +                 __func__, (int)addr, (int)val64);

Same comment about: qemu_log_mask(LOG_GUEST_ERROR,

> +    }
> +}
> +
> +static const MemoryRegionOps sifive_u_prci_ops = {
> +    .read = sifive_u_prci_read,
> +    .write = sifive_u_prci_write,
> +    .endianness = DEVICE_NATIVE_ENDIAN,
> +    .valid = {
> +        .min_access_size = 4,
> +        .max_access_size = 4
> +    }
> +};
> +
> +static void sifive_u_prci_init(Object *obj)
> +{
> +    SiFiveUPRCIState *s = SIFIVE_U_PRCI(obj);
> +
> +    memory_region_init_io(&s->mmio, obj, &sifive_u_prci_ops, s,
> +                          TYPE_SIFIVE_U_PRCI, SIFIVE_U_PRCI_REG_SIZE);
> +    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
> +
> +    /* Initialize register to power-on-reset values */
> +    s->hfxosccfg = (SIFIVE_U_PRCI_HFXOSCCFG_RDY | SIFIVE_U_PRCI_HFXOSCCFG_EN);
> +    s->corepllcfg0 = (SIFIVE_U_PRCI_PLLCFG0_DIVR | SIFIVE_U_PRCI_PLLCFG0_DIVF |
> +                      SIFIVE_U_PRCI_PLLCFG0_DIVQ | SIFIVE_U_PRCI_PLLCFG0_FSE |
> +                      SIFIVE_U_PRCI_PLLCFG0_LOCK);
> +    s->ddrpllcfg0 = (SIFIVE_U_PRCI_PLLCFG0_DIVR | SIFIVE_U_PRCI_PLLCFG0_DIVF |
> +                     SIFIVE_U_PRCI_PLLCFG0_DIVQ | SIFIVE_U_PRCI_PLLCFG0_FSE |
> +                     SIFIVE_U_PRCI_PLLCFG0_LOCK);
> +    s->gemgxlpllcfg0 = (SIFIVE_U_PRCI_PLLCFG0_DIVR |
> +                        SIFIVE_U_PRCI_PLLCFG0_DIVF |
> +                        SIFIVE_U_PRCI_PLLCFG0_DIVQ |
> +                        SIFIVE_U_PRCI_PLLCFG0_FSE |
> +                        SIFIVE_U_PRCI_PLLCFG0_LOCK);
> +    s->coreclksel = SIFIVE_U_PRCI_CORECLKSEL_HFCLK;

These should be in the reset functino shouldn't they?

> +}
> +
> +static const TypeInfo sifive_u_prci_info = {
> +    .name          = TYPE_SIFIVE_U_PRCI,
> +    .parent        = TYPE_SYS_BUS_DEVICE,
> +    .instance_size = sizeof(SiFiveUPRCIState),
> +    .instance_init = sifive_u_prci_init,
> +};
> +
> +static void sifive_u_prci_register_types(void)
> +{
> +    type_register_static(&sifive_u_prci_info);
> +}
> +
> +type_init(sifive_u_prci_register_types)
> +
> +
> +/* Create PRCI device */
> +DeviceState *sifive_u_prci_create(hwaddr addr)
> +{
> +    DeviceState *dev = qdev_create(NULL, TYPE_SIFIVE_U_PRCI);
> +    qdev_init_nofail(dev);
> +    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
> +    return dev;
> +}

Don't do this, just create it in the machine.

> diff --git a/include/hw/riscv/sifive_u_prci.h b/include/hw/riscv/sifive_u_prci.h
> new file mode 100644
> index 0000000..66eacb5
> --- /dev/null
> +++ b/include/hw/riscv/sifive_u_prci.h
> @@ -0,0 +1,90 @@
> +/*
> + * QEMU SiFive U PRCI (Power, Reset, Clock, Interrupt) interface
> + *
> + * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef HW_SIFIVE_U_PRCI_H
> +#define HW_SIFIVE_U_PRCI_H
> +
> +enum {
> +    SIFIVE_U_PRCI_HFXOSCCFG     = 0x00,
> +    SIFIVE_U_PRCI_COREPLLCFG0   = 0x04,
> +    SIFIVE_U_PRCI_DDRPLLCFG0    = 0x0C,
> +    SIFIVE_U_PRCI_DDRPLLCFG1    = 0x10,
> +    SIFIVE_U_PRCI_GEMGXLPLLCFG0 = 0x1C,
> +    SIFIVE_U_PRCI_GEMGXLPLLCFG1 = 0x20,
> +    SIFIVE_U_PRCI_CORECLKSEL    = 0x24,
> +    SIFIVE_U_PRCI_DEVICESRESET  = 0x28,
> +    SIFIVE_U_PRCI_CLKMUXSTATUS  = 0x2C
> +};
> +
> +/*
> + * Current FU540-C000 manual says ready bit is at bit 29, but
> + * freedom-u540-c000-bootloader codes (ux00prci.h) says it is at bit 31.
> + * We have to trust the actual codes that worked.

s/codes that worked/code that works/g

> + *
> + * see https://github.com/sifive/freedom-u540-c000-bootloader
> + */
> +enum {
> +    SIFIVE_U_PRCI_HFXOSCCFG_EN  = (1 << 30),
> +    SIFIVE_U_PRCI_HFXOSCCFG_RDY = (1 << 31),
> +};
> +
> +/* xxxPLLCFG0 register bits */
> +enum {
> +    SIFIVE_U_PRCI_PLLCFG0_DIVR  = (1 << 0),
> +    SIFIVE_U_PRCI_PLLCFG0_DIVF  = (31 << 6),
> +    SIFIVE_U_PRCI_PLLCFG0_DIVQ  = (3 << 15),
> +    SIFIVE_U_PRCI_PLLCFG0_FSE   = (1 << 25),
> +    SIFIVE_U_PRCI_PLLCFG0_LOCK  = (1 << 31)
> +};
> +
> +/* xxxPLLCFG1 register bits */
> +enum {
> +    SIFIVE_U_PRCI_PLLCFG1_CKE   = (1 << 24)
> +};
> +
> +enum {
> +    SIFIVE_U_PRCI_CORECLKSEL_HFCLK = (1 << 0)
> +};

Why use enums for eveythign instead of #defines?

Alistair

> +
> +#define SIFIVE_U_PRCI_REG_SIZE  0x1000
> +
> +#define TYPE_SIFIVE_U_PRCI      "riscv.sifive.u.prci"
> +
> +#define SIFIVE_U_PRCI(obj) \
> +    OBJECT_CHECK(SiFiveUPRCIState, (obj), TYPE_SIFIVE_U_PRCI)
> +
> +typedef struct SiFiveUPRCIState {
> +    /*< private >*/
> +    SysBusDevice parent_obj;
> +
> +    /*< public >*/
> +    MemoryRegion mmio;
> +    uint32_t hfxosccfg;
> +    uint32_t corepllcfg0;
> +    uint32_t ddrpllcfg0;
> +    uint32_t ddrpllcfg1;
> +    uint32_t gemgxlpllcfg0;
> +    uint32_t gemgxlpllcfg1;
> +    uint32_t coreclksel;
> +    uint32_t devicesreset;
> +    uint32_t clkmuxstatus;
> +} SiFiveUPRCIState;
> +
> +DeviceState *sifive_u_prci_create(hwaddr addr);
> +
> +#endif /* HW_SIFIVE_U_PRCI_H */
> --
> 2.7.4
>
>


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [Qemu-devel] [PATCH v4 18/28] riscv: sifive_u: Generate hfclk and rtcclk nodes
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 18/28] riscv: sifive_u: Generate hfclk and rtcclk nodes Bin Meng
@ 2019-08-19 20:22   ` Alistair Francis
  0 siblings, 0 replies; 36+ messages in thread
From: Alistair Francis @ 2019-08-19 20:22 UTC (permalink / raw)
  To: Bin Meng
  Cc: open list:RISC-V, Palmer Dabbelt, Alistair Francis,
	qemu-devel@nongnu.org Developers

On Sun, Aug 18, 2019 at 10:29 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> To keep in sync with Linux kernel device tree, generate hfclk and
> rtcclk nodes in the device tree, to be referenced by PRCI node.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
>  hw/riscv/sifive_u.c         | 23 +++++++++++++++++++++++
>  include/hw/riscv/sifive_u.h |  2 ++
>  2 files changed, 25 insertions(+)
>
> diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
> index 284f7a5..08db741 100644
> --- a/hw/riscv/sifive_u.c
> +++ b/hw/riscv/sifive_u.c
> @@ -80,6 +80,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
>      char ethclk_names[] = "pclk\0hclk\0tx_clk";
>      uint32_t plic_phandle, ethclk_phandle, phandle = 1;
>      uint32_t uartclk_phandle;
> +    uint32_t hfclk_phandle, rtcclk_phandle;
>
>      fdt = s->fdt = create_device_tree(&s->fdt_size);
>      if (!fdt) {
> @@ -98,6 +99,28 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
>      qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2);
>      qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2);
>
> +    hfclk_phandle = phandle++;
> +    nodename = g_strdup_printf("/hfclk");
> +    qemu_fdt_add_subnode(fdt, nodename);
> +    qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle);
> +    qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk");
> +    qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
> +        SIFIVE_U_HFCLK_FREQ);
> +    qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
> +    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
> +    g_free(nodename);
> +
> +    rtcclk_phandle = phandle++;
> +    nodename = g_strdup_printf("/rtcclk");
> +    qemu_fdt_add_subnode(fdt, nodename);
> +    qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle);
> +    qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk");
> +    qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
> +        SIFIVE_U_RTCCLK_FREQ);
> +    qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
> +    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
> +    g_free(nodename);
> +
>      nodename = g_strdup_printf("/memory@%lx",
>          (long)memmap[SIFIVE_U_DRAM].base);
>      qemu_fdt_add_subnode(fdt, nodename);
> diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
> index 7a1a4f3..debbf28 100644
> --- a/include/hw/riscv/sifive_u.h
> +++ b/include/hw/riscv/sifive_u.h
> @@ -68,6 +68,8 @@ enum {
>
>  enum {
>      SIFIVE_U_CLOCK_FREQ = 1000000000,
> +    SIFIVE_U_HFCLK_FREQ = 33333333,
> +    SIFIVE_U_RTCCLK_FREQ = 1000000,
>      SIFIVE_U_GEM_CLOCK_FREQ = 125000000
>  };
>
> --
> 2.7.4
>
>


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [Qemu-devel] [PATCH v4 20/28] riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 20/28] riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes Bin Meng
@ 2019-08-20 18:26   ` Alistair Francis
  0 siblings, 0 replies; 36+ messages in thread
From: Alistair Francis @ 2019-08-20 18:26 UTC (permalink / raw)
  To: Bin Meng
  Cc: open list:RISC-V, Palmer Dabbelt, Alistair Francis,
	qemu-devel@nongnu.org Developers

On Sun, Aug 18, 2019 at 10:24 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> Now that we have added a PRCI node, update existing UART and ethernet
> nodes to reference PRCI as their clock sources, to keep in sync with
> the Linux kernel device tree.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
>  hw/riscv/sifive_u.c              |  7 ++++---
>  include/hw/riscv/sifive_u_prci.h | 10 ++++++++++
>  2 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
> index bd5551c..8818fd6 100644
> --- a/hw/riscv/sifive_u.c
> +++ b/hw/riscv/sifive_u.c
> @@ -80,7 +80,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
>      int cpu;
>      uint32_t *cells;
>      char *nodename;
> -    char ethclk_names[] = "pclk\0hclk\0tx_clk";
> +    char ethclk_names[] = "pclk\0hclk";
>      uint32_t plic_phandle, prci_phandle, ethclk_phandle, phandle = 1;
>      uint32_t uartclk_phandle;
>      uint32_t hfclk_phandle, rtcclk_phandle;
> @@ -265,7 +265,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
>      qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
>      qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
>      qemu_fdt_setprop_cells(fdt, nodename, "clocks",
> -        ethclk_phandle, ethclk_phandle, ethclk_phandle);
> +        prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL);
>      qemu_fdt_setprop(fdt, nodename, "clock-names", ethclk_names,
>          sizeof(ethclk_names));
>      qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
> @@ -295,7 +295,8 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
>      qemu_fdt_setprop_cells(fdt, nodename, "reg",
>          0x0, memmap[SIFIVE_U_UART0].base,
>          0x0, memmap[SIFIVE_U_UART0].size);
> -    qemu_fdt_setprop_cell(fdt, nodename, "clocks", uartclk_phandle);
> +    qemu_fdt_setprop_cells(fdt, nodename, "clocks",
> +        prci_phandle, PRCI_CLK_TLCLK);
>      qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
>      qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ);
>
> diff --git a/include/hw/riscv/sifive_u_prci.h b/include/hw/riscv/sifive_u_prci.h
> index 66eacb5..cdf1d33 100644
> --- a/include/hw/riscv/sifive_u_prci.h
> +++ b/include/hw/riscv/sifive_u_prci.h
> @@ -87,4 +87,14 @@ typedef struct SiFiveUPRCIState {
>
>  DeviceState *sifive_u_prci_create(hwaddr addr);
>
> +/*
> + * Clock indexes for use by Device Tree data and the PRCI driver.
> + *
> + * These values are from sifive-fu540-prci.h in the Linux kernel.
> + */
> +#define PRCI_CLK_COREPLL        0
> +#define PRCI_CLK_DDRPLL         1
> +#define PRCI_CLK_GEMGXLPLL      2
> +#define PRCI_CLK_TLCLK          3
> +
>  #endif /* HW_SIFIVE_U_PRCI_H */
> --
> 2.7.4
>
>


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [Qemu-devel] [PATCH v4 27/28] riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet
  2019-08-19  5:12 ` [Qemu-devel] [PATCH v4 27/28] riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet Bin Meng
@ 2019-08-22 22:39   ` Alistair Francis
  0 siblings, 0 replies; 36+ messages in thread
From: Alistair Francis @ 2019-08-22 22:39 UTC (permalink / raw)
  To: Bin Meng
  Cc: open list:RISC-V, Palmer Dabbelt, Alistair Francis,
	qemu-devel@nongnu.org Developers

On Sun, Aug 18, 2019 at 10:31 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> In the past we did not have a model for PRCI, hence two handcrafted
> clock nodes ("/soc/ethclk" and "/soc/uartclk") were created for the
> purpose of supplying hard-coded clock frequencies. But now since we
> have added the PRCI support in QEMU, we don't need them any more.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

>
> ---
>
> Changes in v4:
> - new patch to remove handcrafted clock nodes for UART and ethernet
>
> Changes in v3: None
> Changes in v2: None
>
>  hw/riscv/sifive_u.c         | 24 +-----------------------
>  include/hw/riscv/sifive_u.h |  3 +--
>  2 files changed, 2 insertions(+), 25 deletions(-)
>
> diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
> index 7a370e9..7d9fb3a 100644
> --- a/hw/riscv/sifive_u.c
> +++ b/hw/riscv/sifive_u.c
> @@ -89,8 +89,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
>      uint32_t *cells;
>      char *nodename;
>      char ethclk_names[] = "pclk\0hclk";
> -    uint32_t plic_phandle, prci_phandle, ethclk_phandle, phandle = 1;
> -    uint32_t uartclk_phandle;
> +    uint32_t plic_phandle, prci_phandle, phandle = 1;
>      uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
>
>      fdt = s->fdt = create_device_tree(&s->fdt_size);
> @@ -250,17 +249,6 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
>      g_free(cells);
>      g_free(nodename);
>
> -    ethclk_phandle = phandle++;
> -    nodename = g_strdup_printf("/soc/ethclk");
> -    qemu_fdt_add_subnode(fdt, nodename);
> -    qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
> -    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
> -    qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
> -        SIFIVE_U_GEM_CLOCK_FREQ);
> -    qemu_fdt_setprop_cell(fdt, nodename, "phandle", ethclk_phandle);
> -    ethclk_phandle = qemu_fdt_get_phandle(fdt, nodename);
> -    g_free(nodename);
> -
>      phy_phandle = phandle++;
>      nodename = g_strdup_printf("/soc/ethernet@%lx",
>          (long)memmap[SIFIVE_U_GEM].base);
> @@ -292,16 +280,6 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
>      qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
>      g_free(nodename);
>
> -    uartclk_phandle = phandle++;
> -    nodename = g_strdup_printf("/soc/uartclk");
> -    qemu_fdt_add_subnode(fdt, nodename);
> -    qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
> -    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
> -    qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 3686400);
> -    qemu_fdt_setprop_cell(fdt, nodename, "phandle", uartclk_phandle);
> -    uartclk_phandle = qemu_fdt_get_phandle(fdt, nodename);
> -    g_free(nodename);
> -
>      nodename = g_strdup_printf("/soc/serial@%lx",
>          (long)memmap[SIFIVE_U_UART0].base);
>      qemu_fdt_add_subnode(fdt, nodename);
> diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
> index cba29e1..8880f9c 100644
> --- a/include/hw/riscv/sifive_u.h
> +++ b/include/hw/riscv/sifive_u.h
> @@ -72,8 +72,7 @@ enum {
>  enum {
>      SIFIVE_U_CLOCK_FREQ = 1000000000,
>      SIFIVE_U_HFCLK_FREQ = 33333333,
> -    SIFIVE_U_RTCCLK_FREQ = 1000000,
> -    SIFIVE_U_GEM_CLOCK_FREQ = 125000000
> +    SIFIVE_U_RTCCLK_FREQ = 1000000
>  };
>
>  #define SIFIVE_U_MANAGEMENT_CPU_COUNT   1
> --
> 2.7.4
>
>


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [Qemu-devel] [PATCH v4 13/28] riscv: hart: Add a "hartid-base" property to RISC-V hart array
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 13/28] riscv: hart: Add a "hartid-base" property to RISC-V hart array Bin Meng
@ 2019-08-22 22:40   ` Alistair Francis
  2019-08-23  1:57     ` Bin Meng
  0 siblings, 1 reply; 36+ messages in thread
From: Alistair Francis @ 2019-08-22 22:40 UTC (permalink / raw)
  To: Bin Meng
  Cc: open list:RISC-V, Palmer Dabbelt, Alistair Francis,
	qemu-devel@nongnu.org Developers

On Sun, Aug 18, 2019 at 10:27 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> At present each hart's hartid in a RISC-V hart array is assigned
> the same value of its index in the hart array. But for a system
> that has multiple hart arrays, this is not the case any more.
>
> Add a new "hartid-base" property so that hartid number can be
> assigned based on the property value.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Why do we need this patch?

Alistair

>
> ---
>
> Changes in v4:
> - new patch to add a "hartid-base" property to RISC-V hart array
>
> Changes in v3: None
> Changes in v2: None
>
>  hw/riscv/riscv_hart.c         | 8 +++++---
>  include/hw/riscv/riscv_hart.h | 1 +
>  2 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/hw/riscv/riscv_hart.c b/hw/riscv/riscv_hart.c
> index 9deef869..52ab86a 100644
> --- a/hw/riscv/riscv_hart.c
> +++ b/hw/riscv/riscv_hart.c
> @@ -27,6 +27,7 @@
>
>  static Property riscv_harts_props[] = {
>      DEFINE_PROP_UINT32("num-harts", RISCVHartArrayState, num_harts, 1),
> +    DEFINE_PROP_UINT32("hartid-base", RISCVHartArrayState, hartid_base, 0),
>      DEFINE_PROP_STRING("cpu-type", RISCVHartArrayState, cpu_type),
>      DEFINE_PROP_END_OF_LIST(),
>  };
> @@ -37,7 +38,7 @@ static void riscv_harts_cpu_reset(void *opaque)
>      cpu_reset(CPU(cpu));
>  }
>
> -static void riscv_hart_realize(RISCVHartArrayState *s, int idx,
> +static void riscv_hart_realize(RISCVHartArrayState *s, int idx, uint32_t hartid,
>                                 char *cpu_type, Error **errp)
>  {
>      Error *err = NULL;
> @@ -45,7 +46,7 @@ static void riscv_hart_realize(RISCVHartArrayState *s, int idx,
>      object_initialize_child(OBJECT(s), "harts[*]", &s->harts[idx],
>                              sizeof(RISCVCPU), cpu_type,
>                              &error_abort, NULL);
> -    s->harts[idx].env.mhartid = idx;
> +    s->harts[idx].env.mhartid = hartid;
>      qemu_register_reset(riscv_harts_cpu_reset, &s->harts[idx]);
>      object_property_set_bool(OBJECT(&s->harts[idx]), true,
>                               "realized", &err);
> @@ -58,12 +59,13 @@ static void riscv_hart_realize(RISCVHartArrayState *s, int idx,
>  static void riscv_harts_realize(DeviceState *dev, Error **errp)
>  {
>      RISCVHartArrayState *s = RISCV_HART_ARRAY(dev);
> +    uint32_t hartid = s->hartid_base;
>      int n;
>
>      s->harts = g_new0(RISCVCPU, s->num_harts);
>
>      for (n = 0; n < s->num_harts; n++) {
> -        riscv_hart_realize(s, n, s->cpu_type, errp);
> +        riscv_hart_realize(s, n, hartid + n, s->cpu_type, errp);
>      }
>  }
>
> diff --git a/include/hw/riscv/riscv_hart.h b/include/hw/riscv/riscv_hart.h
> index 0671d88..1984e30 100644
> --- a/include/hw/riscv/riscv_hart.h
> +++ b/include/hw/riscv/riscv_hart.h
> @@ -32,6 +32,7 @@ typedef struct RISCVHartArrayState {
>
>      /*< public >*/
>      uint32_t num_harts;
> +    uint32_t hartid_base;
>      char *cpu_type;
>      RISCVCPU *harts;
>  } RISCVHartArrayState;
> --
> 2.7.4
>
>


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [Qemu-devel] [PATCH v4 24/28] riscv: sifive: Implement a model for SiFive FU540 OTP
  2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 24/28] riscv: sifive: Implement a model for SiFive FU540 OTP Bin Meng
@ 2019-08-22 22:41   ` Alistair Francis
  0 siblings, 0 replies; 36+ messages in thread
From: Alistair Francis @ 2019-08-22 22:41 UTC (permalink / raw)
  To: Bin Meng
  Cc: open list:RISC-V, Palmer Dabbelt, Alistair Francis,
	qemu-devel@nongnu.org Developers

On Sun, Aug 18, 2019 at 10:19 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> This implements a simple model for SiFive FU540 OTP (One-Time
> Programmable) Memory interface, primarily for reading out the
> stored serial number from the first 1 KiB of the 16 KiB OTP
> memory reserved by SiFive for internal use.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
>
> ---
>
> Changes in v4:
> - prefix all macros/variables/functions with SIFIVE_U/sifive_u
>   in the sifive_u_otp driver
>
> Changes in v3: None
> Changes in v2: None
>
>  hw/riscv/Makefile.objs          |   1 +
>  hw/riscv/sifive_u_otp.c         | 194 ++++++++++++++++++++++++++++++++++++++++
>  include/hw/riscv/sifive_u_otp.h |  90 +++++++++++++++++++
>  3 files changed, 285 insertions(+)
>  create mode 100644 hw/riscv/sifive_u_otp.c
>  create mode 100644 include/hw/riscv/sifive_u_otp.h
>
> diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs
> index b95bbd5..fc3c6dd 100644
> --- a/hw/riscv/Makefile.objs
> +++ b/hw/riscv/Makefile.objs
> @@ -8,6 +8,7 @@ obj-$(CONFIG_SIFIVE) += sifive_gpio.o
>  obj-$(CONFIG_SIFIVE) += sifive_plic.o
>  obj-$(CONFIG_SIFIVE) += sifive_test.o
>  obj-$(CONFIG_SIFIVE_U) += sifive_u.o
> +obj-$(CONFIG_SIFIVE_U) += sifive_u_otp.o
>  obj-$(CONFIG_SIFIVE_U) += sifive_u_prci.o
>  obj-$(CONFIG_SIFIVE) += sifive_uart.o
>  obj-$(CONFIG_SPIKE) += spike.o
> diff --git a/hw/riscv/sifive_u_otp.c b/hw/riscv/sifive_u_otp.c
> new file mode 100644
> index 0000000..de8801c
> --- /dev/null
> +++ b/hw/riscv/sifive_u_otp.c
> @@ -0,0 +1,194 @@
> +/*
> + * QEMU SiFive U OTP (One-Time Programmable) Memory interface
> + *
> + * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
> + *
> + * Simple model of the OTP to emulate register reads made by the SDK BSP
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/sysbus.h"
> +#include "qemu/module.h"
> +#include "target/riscv/cpu.h"
> +#include "hw/riscv/sifive_u_otp.h"
> +
> +static uint64_t sifive_u_otp_read(void *opaque, hwaddr addr, unsigned int size)
> +{
> +    SiFiveUOTPState *s = opaque;
> +
> +    switch (addr) {
> +    case SIFIVE_U_OTP_PA:
> +        return s->pa;
> +    case SIFIVE_U_OTP_PAIO:
> +        return s->paio;
> +    case SIFIVE_U_OTP_PAS:
> +        return s->pas;
> +    case SIFIVE_U_OTP_PCE:
> +        return s->pce;
> +    case SIFIVE_U_OTP_PCLK:
> +        return s->pclk;
> +    case SIFIVE_U_OTP_PDIN:
> +        return s->pdin;
> +    case SIFIVE_U_OTP_PDOUT:
> +        if ((s->pce & SIFIVE_U_OTP_PCE_EN) &&
> +            (s->pdstb & SIFIVE_U_OTP_PDSTB_EN) &&
> +            (s->ptrim & SIFIVE_U_OTP_PTRIM_EN)) {
> +            return s->fuse[s->pa & SIFIVE_U_OTP_PA_MASK];
> +        } else {
> +            return 0xff;
> +        }
> +    case SIFIVE_U_OTP_PDSTB:
> +        return s->pdstb;
> +    case SIFIVE_U_OTP_PPROG:
> +        return s->pprog;
> +    case SIFIVE_U_OTP_PTC:
> +        return s->ptc;
> +    case SIFIVE_U_OTP_PTM:
> +        return s->ptm;
> +    case SIFIVE_U_OTP_PTM_REP:
> +        return s->ptm_rep;
> +    case SIFIVE_U_OTP_PTR:
> +        return s->ptr;
> +    case SIFIVE_U_OTP_PTRIM:
> +        return s->ptrim;
> +    case SIFIVE_U_OTP_PWE:
> +        return s->pwe;
> +    }
> +
> +    hw_error("%s: read: addr=0x%x\n", __func__, (int)addr);

This should be qem_log_mask().

> +    return 0;
> +}
> +
> +static void sifive_u_otp_write(void *opaque, hwaddr addr,
> +                               uint64_t val64, unsigned int size)
> +{
> +    SiFiveUOTPState *s = opaque;
> +
> +    switch (addr) {
> +    case SIFIVE_U_OTP_PA:
> +        s->pa = (uint32_t) val64 & SIFIVE_U_OTP_PA_MASK;
> +        break;
> +    case SIFIVE_U_OTP_PAIO:
> +        s->paio = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PAS:
> +        s->pas = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PCE:
> +        s->pce = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PCLK:
> +        s->pclk = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PDIN:
> +        s->pdin = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PDOUT:
> +        /* read-only */
> +        break;
> +    case SIFIVE_U_OTP_PDSTB:
> +        s->pdstb = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PPROG:
> +        s->pprog = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PTC:
> +        s->ptc = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PTM:
> +        s->ptm = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PTM_REP:
> +        s->ptm_rep = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PTR:
> +        s->ptr = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PTRIM:
> +        s->ptrim = (uint32_t) val64;
> +        break;
> +    case SIFIVE_U_OTP_PWE:
> +        s->pwe = (uint32_t) val64;
> +        break;
> +    default:
> +        hw_error("%s: bad write: addr=0x%x v=0x%x\n",
> +                 __func__, (int)addr, (int)val64);

Same as above

> +    }
> +}
> +
> +static const MemoryRegionOps sifive_u_otp_ops = {
> +    .read = sifive_u_otp_read,
> +    .write = sifive_u_otp_write,
> +    .endianness = DEVICE_NATIVE_ENDIAN,
> +    .valid = {
> +        .min_access_size = 4,
> +        .max_access_size = 4
> +    }
> +};
> +
> +static Property sifive_u_otp_properties[] = {
> +    DEFINE_PROP_UINT32("serial", SiFiveUOTPState, serial, 0),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void sifive_u_otp_realize(DeviceState *dev, Error **errp)
> +{
> +    SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
> +
> +    memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_u_otp_ops, s,
> +                          TYPE_SIFIVE_U_OTP, SIFIVE_U_OTP_REG_SIZE);
> +    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
> +
> +    /* Initialize all fuses' initial value to 0xFFs */
> +    memset(s->fuse, 0xff, sizeof(s->fuse));
> +
> +    /* Make a valid content of serial number */
> +    s->fuse[SIFIVE_U_OTP_SERIAL_ADDR] = s->serial;
> +    s->fuse[SIFIVE_U_OTP_SERIAL_ADDR + 1] = ~(s->serial);
> +}
> +
> +static void sifive_u_otp_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +
> +    dc->props = sifive_u_otp_properties;
> +    dc->realize = sifive_u_otp_realize;
> +}
> +
> +static const TypeInfo sifive_u_otp_info = {
> +    .name          = TYPE_SIFIVE_U_OTP,
> +    .parent        = TYPE_SYS_BUS_DEVICE,
> +    .instance_size = sizeof(SiFiveUOTPState),
> +    .class_init    = sifive_u_otp_class_init,
> +};
> +
> +static void sifive_u_otp_register_types(void)
> +{
> +    type_register_static(&sifive_u_otp_info);
> +}
> +
> +type_init(sifive_u_otp_register_types)
> +
> +
> +/* Create OTP device */
> +DeviceState *sifive_u_otp_create(hwaddr addr, uint32_t serial)

Don't include this function.

Alistair

> +{
> +    DeviceState *dev = qdev_create(NULL, TYPE_SIFIVE_U_OTP);
> +    qdev_prop_set_uint32(dev, "serial", serial);
> +    qdev_init_nofail(dev);
> +    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
> +
> +    return dev;
> +}
> diff --git a/include/hw/riscv/sifive_u_otp.h b/include/hw/riscv/sifive_u_otp.h
> new file mode 100644
> index 0000000..7eac661
> --- /dev/null
> +++ b/include/hw/riscv/sifive_u_otp.h
> @@ -0,0 +1,90 @@
> +/*
> + * QEMU SiFive U OTP (One-Time Programmable) Memory interface
> + *
> + * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef HW_SIFIVE_U_OTP_H
> +#define HW_SIFIVE_U_OTP_H
> +
> +enum {
> +    SIFIVE_U_OTP_PA         = 0x00,
> +    SIFIVE_U_OTP_PAIO       = 0x04,
> +    SIFIVE_U_OTP_PAS        = 0x08,
> +    SIFIVE_U_OTP_PCE        = 0x0C,
> +    SIFIVE_U_OTP_PCLK       = 0x10,
> +    SIFIVE_U_OTP_PDIN       = 0x14,
> +    SIFIVE_U_OTP_PDOUT      = 0x18,
> +    SIFIVE_U_OTP_PDSTB      = 0x1C,
> +    SIFIVE_U_OTP_PPROG      = 0x20,
> +    SIFIVE_U_OTP_PTC        = 0x24,
> +    SIFIVE_U_OTP_PTM        = 0x28,
> +    SIFIVE_U_OTP_PTM_REP    = 0x2C,
> +    SIFIVE_U_OTP_PTR        = 0x30,
> +    SIFIVE_U_OTP_PTRIM      = 0x34,
> +    SIFIVE_U_OTP_PWE        = 0x38
> +};
> +
> +enum {
> +    SIFIVE_U_OTP_PCE_EN     = (1 << 0)
> +};
> +
> +enum {
> +    SIFIVE_U_OTP_PDSTB_EN   = (1 << 0)
> +};
> +
> +enum {
> +    SIFIVE_U_OTP_PTRIM_EN   = (1 << 0)
> +};
> +
> +#define SIFIVE_U_OTP_PA_MASK        0xfff
> +#define SIFIVE_U_OTP_NUM_FUSES      0x1000
> +#define SIFIVE_U_OTP_SERIAL_ADDR    0xfc
> +
> +#define SIFIVE_U_OTP_REG_SIZE       0x1000
> +
> +#define TYPE_SIFIVE_U_OTP           "riscv.sifive.u.otp"
> +
> +#define SIFIVE_U_OTP(obj) \
> +    OBJECT_CHECK(SiFiveUOTPState, (obj), TYPE_SIFIVE_U_OTP)
> +
> +typedef struct SiFiveUOTPState {
> +    /*< private >*/
> +    SysBusDevice parent_obj;
> +
> +    /*< public >*/
> +    MemoryRegion mmio;
> +    uint32_t pa;
> +    uint32_t paio;
> +    uint32_t pas;
> +    uint32_t pce;
> +    uint32_t pclk;
> +    uint32_t pdin;
> +    uint32_t pdstb;
> +    uint32_t pprog;
> +    uint32_t ptc;
> +    uint32_t ptm;
> +    uint32_t ptm_rep;
> +    uint32_t ptr;
> +    uint32_t ptrim;
> +    uint32_t pwe;
> +    uint32_t fuse[SIFIVE_U_OTP_NUM_FUSES];
> +    /* config */
> +    uint32_t serial;
> +} SiFiveUOTPState;
> +
> +DeviceState *sifive_u_otp_create(hwaddr addr, uint32_t serial);
> +
> +#endif /* HW_SIFIVE_U_OTP_H */
> --
> 2.7.4
>
>


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [Qemu-devel] [PATCH v4 13/28] riscv: hart: Add a "hartid-base" property to RISC-V hart array
  2019-08-22 22:40   ` Alistair Francis
@ 2019-08-23  1:57     ` Bin Meng
  0 siblings, 0 replies; 36+ messages in thread
From: Bin Meng @ 2019-08-23  1:57 UTC (permalink / raw)
  To: Alistair Francis
  Cc: open list:RISC-V, Palmer Dabbelt, Alistair Francis,
	qemu-devel@nongnu.org Developers

Hi Alistair,

On Fri, Aug 23, 2019 at 6:44 AM Alistair Francis <alistair23@gmail.com> wrote:
>
> On Sun, Aug 18, 2019 at 10:27 PM Bin Meng <bmeng.cn@gmail.com> wrote:
> >
> > At present each hart's hartid in a RISC-V hart array is assigned
> > the same value of its index in the hart array. But for a system
> > that has multiple hart arrays, this is not the case any more.
> >
> > Add a new "hartid-base" property so that hartid number can be
> > assigned based on the property value.
> >
> > Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
>
> Why do we need this patch?
>

Without this patch, we cannot create two clusters that represent 1 E51
(hartid 0) and 4 U54 (hart id 1-4). Current codes will create 1 E51
(hartid 0) and 4 U54 (hartid 0-3)

Regards,
Bin


^ permalink raw reply	[flat|nested] 36+ messages in thread

end of thread, other threads:[~2019-08-23  1:58 UTC | newest]

Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-19  5:11 [Qemu-devel] [PATCH v4 00/28] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 01/28] riscv: hw: Remove superfluous "linux, phandle" property Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 02/28] riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 03/28] riscv: hw: Remove not needed PLIC properties in device tree Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 04/28] riscv: hw: Change create_fdt() to return void Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 05/28] riscv: roms: Remove executable attribute of opensbi images Bin Meng
2019-08-19 20:08   ` Alistair Francis
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 06/28] riscv: sifive_u: Remove the unnecessary include of prci header Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 07/28] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h} Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 08/28] riscv: sifive_e: prci: Fix a typo of hfxosccfg register programming Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 09/28] riscv: sifive_e: prci: Update the PRCI register block size Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 11/28] riscv: Add a sifive_cpu.h to include both E and U cpu type defines Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 12/28] riscv: hart: Extract hart realize to a separate routine Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 13/28] riscv: hart: Add a "hartid-base" property to RISC-V hart array Bin Meng
2019-08-22 22:40   ` Alistair Francis
2019-08-23  1:57     ` Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 14/28] riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 15/28] riscv: sifive_u: Set the minimum number of cpus to 2 Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 16/28] riscv: sifive_u: Update PLIC hart topology configuration string Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 17/28] riscv: sifive: Implement PRCI model for FU540 Bin Meng
2019-08-19 20:21   ` Alistair Francis
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 18/28] riscv: sifive_u: Generate hfclk and rtcclk nodes Bin Meng
2019-08-19 20:22   ` Alistair Francis
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 19/28] riscv: sifive_u: Add PRCI block to the SoC Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 20/28] riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes Bin Meng
2019-08-20 18:26   ` Alistair Francis
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 21/28] riscv: sifive_u: Update UART base addresses and IRQs Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 22/28] riscv: sifive_u: Change UART node name in device tree Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 23/28] riscv: roms: Update default bios for sifive_u machine Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 24/28] riscv: sifive: Implement a model for SiFive FU540 OTP Bin Meng
2019-08-22 22:41   ` Alistair Francis
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 25/28] riscv: sifive_u: Instantiate OTP memory with a serial number Bin Meng
2019-08-19  5:11 ` [Qemu-devel] [PATCH v4 26/28] riscv: sifive_u: Fix broken GEM support Bin Meng
2019-08-19  5:12 ` [Qemu-devel] [PATCH v4 27/28] riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet Bin Meng
2019-08-22 22:39   ` Alistair Francis
2019-08-19  5:12 ` [Qemu-devel] [PATCH v4 28/28] riscv: sifive_u: Update model and compatible strings in device tree Bin Meng

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).