* [Bug 1890775] [NEW] Aten USB to Serial bridge does not work with qemu under Windows 10
@ 2020-08-07 5:31 Laci
2020-08-07 5:33 ` [Bug 1890775] " Laci
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Laci @ 2020-08-07 5:31 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
I would like to use MSDOS 6.22 with qemu (unfortunatelly lot of our test programs has been written in dos).
I tried to connect two laptop by RS232 port, one of the machine have a built-in serial port and run with native MSDOS 6.22 with 4.0 norton commander. Another machine have only USB ports and i try to use a new Aten USB to Serial device. Ok. Has been started qemu with -serial and -chardev parameters, at startup appear a window with serial port setting such as baud rate, start bit, etc...
Quemu has been satrted succeeded but serial port cannot be used becouse
was nothing activited on usb serial adapter :(
I tried same configuration with VirtualBox and everything was worked
fine (serial connection was estabiled and copied several files from one
machine into another machine), seems to be the emulated serial port has
been worked fine.
I would like to use qemu, i just thougt qemu is better, simple and
faster...
Exists solution or is this a qemu bug?
Thank you!
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1890775
Title:
Aten USB to Serial bridge does not work with qemu under Windows 10
Status in QEMU:
New
Bug description:
I would like to use MSDOS 6.22 with qemu (unfortunatelly lot of our test programs has been written in dos).
I tried to connect two laptop by RS232 port, one of the machine have a built-in serial port and run with native MSDOS 6.22 with 4.0 norton commander. Another machine have only USB ports and i try to use a new Aten USB to Serial device. Ok. Has been started qemu with -serial and -chardev parameters, at startup appear a window with serial port setting such as baud rate, start bit, etc...
Quemu has been satrted succeeded but serial port cannot be used
becouse was nothing activited on usb serial adapter :(
I tried same configuration with VirtualBox and everything was worked
fine (serial connection was estabiled and copied several files from
one machine into another machine), seems to be the emulated serial
port has been worked fine.
I would like to use qemu, i just thougt qemu is better, simple and
faster...
Exists solution or is this a qemu bug?
Thank you!
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1890775/+subscriptions
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Bug 1890775] Re: Aten USB to Serial bridge does not work with qemu under Windows 10
2020-08-07 5:31 [Bug 1890775] [NEW] Aten USB to Serial bridge does not work with qemu under Windows 10 Laci
@ 2020-08-07 5:33 ` Laci
2020-08-13 19:35 ` Laci
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Laci @ 2020-08-07 5:33 UTC (permalink / raw)
To: qemu-devel
I forgot that the environment is Windows 10 64 bit.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1890775
Title:
Aten USB to Serial bridge does not work with qemu under Windows 10
Status in QEMU:
New
Bug description:
I would like to use MSDOS 6.22 with qemu (unfortunatelly lot of our test programs has been written in dos).
I tried to connect two laptop by RS232 port, one of the machine have a built-in serial port and run with native MSDOS 6.22 with 4.0 norton commander. Another machine have only USB ports and i try to use a new Aten USB to Serial device. Ok. Has been started qemu with -serial and -chardev parameters, at startup appear a window with serial port setting such as baud rate, start bit, etc...
Quemu has been satrted succeeded but serial port cannot be used
becouse was nothing activited on usb serial adapter :(
I tried same configuration with VirtualBox and everything was worked
fine (serial connection was estabiled and copied several files from
one machine into another machine), seems to be the emulated serial
port has been worked fine.
I would like to use qemu, i just thougt qemu is better, simple and
faster...
Exists solution or is this a qemu bug?
Thank you!
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1890775/+subscriptions
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Bug 1890775] Re: Aten USB to Serial bridge does not work with qemu under Windows 10
2020-08-07 5:31 [Bug 1890775] [NEW] Aten USB to Serial bridge does not work with qemu under Windows 10 Laci
2020-08-07 5:33 ` [Bug 1890775] " Laci
@ 2020-08-13 19:35 ` Laci
2021-05-08 5:49 ` Thomas Huth
2021-07-08 4:17 ` Launchpad Bug Tracker
3 siblings, 0 replies; 5+ messages in thread
From: Laci @ 2020-08-13 19:35 UTC (permalink / raw)
To: qemu-devel
Hi again,
Seems to be there is no solution for my problem :(
I have succeeded create NTVDMx64 patch on my Windows 10 installation, so i can run directly 16 bit ms dos applications without any dos emulator.
I take the initiative to close the bug.
Bye
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1890775
Title:
Aten USB to Serial bridge does not work with qemu under Windows 10
Status in QEMU:
New
Bug description:
I would like to use MSDOS 6.22 with qemu (unfortunatelly lot of our test programs has been written in dos).
I tried to connect two laptop by RS232 port, one of the machine have a built-in serial port and run with native MSDOS 6.22 with 4.0 norton commander. Another machine have only USB ports and i try to use a new Aten USB to Serial device. Ok. Has been started qemu with -serial and -chardev parameters, at startup appear a window with serial port setting such as baud rate, start bit, etc...
Quemu has been satrted succeeded but serial port cannot be used
becouse was nothing activited on usb serial adapter :(
I tried same configuration with VirtualBox and everything was worked
fine (serial connection was estabiled and copied several files from
one machine into another machine), seems to be the emulated serial
port has been worked fine.
I would like to use qemu, i just thougt qemu is better, simple and
faster...
Exists solution or is this a qemu bug?
Thank you!
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1890775/+subscriptions
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Bug 1890775] Re: Aten USB to Serial bridge does not work with qemu under Windows 10
2020-08-07 5:31 [Bug 1890775] [NEW] Aten USB to Serial bridge does not work with qemu under Windows 10 Laci
2020-08-07 5:33 ` [Bug 1890775] " Laci
2020-08-13 19:35 ` Laci
@ 2021-05-08 5:49 ` Thomas Huth
2021-07-08 4:17 ` Launchpad Bug Tracker
3 siblings, 0 replies; 5+ messages in thread
From: Thomas Huth @ 2021-05-08 5:49 UTC (permalink / raw)
To: qemu-devel
The QEMU project is currently moving its bug tracking to another system.
For this we need to know which bugs are still valid and which could be
closed already. Thus we are setting the bug state to "Incomplete" now.
If the bug has already been fixed in the latest upstream version of QEMU,
then please close this ticket as "Fix released".
If it is not fixed yet and you think that this bug report here is still
valid, then you have two options:
1) If you already have an account on gitlab.com, please open a new ticket
for this problem in our new tracker here:
https://gitlab.com/qemu-project/qemu/-/issues
and then close this ticket here on Launchpad (or let it expire auto-
matically after 60 days). Please mention the URL of this bug ticket on
Launchpad in the new ticket on GitLab.
2) If you don't have an account on gitlab.com and don't intend to get
one, but still would like to keep this ticket opened, then please switch
the state back to "New" or "Confirmed" within the next 60 days (other-
wise it will get closed as "Expired"). We will then eventually migrate
the ticket automatically to the new system (but you won't be the reporter
of the bug in the new system and thus you won't get notified on changes
anymore).
Thank you and sorry for the inconvenience.
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1890775
Title:
Aten USB to Serial bridge does not work with qemu under Windows 10
Status in QEMU:
Incomplete
Bug description:
I would like to use MSDOS 6.22 with qemu (unfortunatelly lot of our test programs has been written in dos).
I tried to connect two laptop by RS232 port, one of the machine have a built-in serial port and run with native MSDOS 6.22 with 4.0 norton commander. Another machine have only USB ports and i try to use a new Aten USB to Serial device. Ok. Has been started qemu with -serial and -chardev parameters, at startup appear a window with serial port setting such as baud rate, start bit, etc...
Quemu has been satrted succeeded but serial port cannot be used
becouse was nothing activited on usb serial adapter :(
I tried same configuration with VirtualBox and everything was worked
fine (serial connection was estabiled and copied several files from
one machine into another machine), seems to be the emulated serial
port has been worked fine.
I would like to use qemu, i just thougt qemu is better, simple and
faster...
Exists solution or is this a qemu bug?
Thank you!
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1890775/+subscriptions
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Bug 1890775] Re: Aten USB to Serial bridge does not work with qemu under Windows 10
2020-08-07 5:31 [Bug 1890775] [NEW] Aten USB to Serial bridge does not work with qemu under Windows 10 Laci
` (2 preceding siblings ...)
2021-05-08 5:49 ` Thomas Huth
@ 2021-07-08 4:17 ` Launchpad Bug Tracker
3 siblings, 0 replies; 5+ messages in thread
From: Launchpad Bug Tracker @ 2021-07-08 4:17 UTC (permalink / raw)
To: qemu-devel
[Expired for QEMU because there has been no activity for 60 days.]
** Changed in: qemu
Status: Incomplete => Expired
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1890775
Title:
Aten USB to Serial bridge does not work with qemu under Windows 10
Status in QEMU:
Expired
Bug description:
I would like to use MSDOS 6.22 with qemu (unfortunatelly lot of our test programs has been written in dos).
I tried to connect two laptop by RS232 port, one of the machine have a built-in serial port and run with native MSDOS 6.22 with 4.0 norton commander. Another machine have only USB ports and i try to use a new Aten USB to Serial device. Ok. Has been started qemu with -serial and -chardev parameters, at startup appear a window with serial port setting such as baud rate, start bit, etc...
Quemu has been satrted succeeded but serial port cannot be used
becouse was nothing activited on usb serial adapter :(
I tried same configuration with VirtualBox and everything was worked
fine (serial connection was estabiled and copied several files from
one machine into another machine), seems to be the emulated serial
port has been worked fine.
I would like to use qemu, i just thougt qemu is better, simple and
faster...
Exists solution or is this a qemu bug?
Thank you!
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1890775/+subscriptions
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-07-08 4:31 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-07 5:31 [Bug 1890775] [NEW] Aten USB to Serial bridge does not work with qemu under Windows 10 Laci
2020-08-07 5:33 ` [Bug 1890775] " Laci
2020-08-13 19:35 ` Laci
2021-05-08 5:49 ` Thomas Huth
2021-07-08 4:17 ` Launchpad Bug Tracker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).