[Bug 1916112] [NEW] Illegal instruction crash of QEMU on Jetson Nano

* [Bug 1916112] [NEW] Illegal instruction crash of QEMU on Jetson Nano
@ 2021-02-19  5:55 Ravishankar
  2021-02-19 16:17 ` [Bug 1916112] " Peter Maydell
                   ` (9 more replies)
  0 siblings, 10 replies; 13+ messages in thread
From: Ravishankar @ 2021-02-19  5:55 UTC (permalink / raw)
  To: qemu-devel

Public bug reported:

I have a jetson nano (arm64 SBC) and I want to check the native
emulation performance of Raspbian Buster. I used the info available
here:

https://github.com/dhruvvyas90/qemu-rpi-kernel/tree/master/native-
emuation

I have Xubuntut 20.04 with KVM enabled kernel running on the Jetson Nano

However QEMU crashes with "Illegal Instruction" during kernel boot. I
have a built latest QEMU from sources with following configuration

./configure --prefix=/usr/local --target-list=aarch64-softmmu,arm-
softmmu  --enable-guest-agent --enable-vnc  --enable-vnc-jpeg --enable-
vnc-png --enable-kvm --enable-spice --enable-sdl --enable-gtk --enable-
virglrenderer --enable-opengl

qemu-system-aarch64 --version
QEMU emulator version 5.2.50 (v5.2.0-1731-g5b19cb63d9)

When I run as follows:

../build/qemu-system-aarch64 -M raspi3
-append "rw earlyprintk loglevel=8 console=ttyAMA0,115200 dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootdelay=1"
-dtb ./bcm2710-rpi-3-b-plus.dtb
-sd /media/96747D21747D0571/JetsonNano/2020-08-20-raspios-buster-armhf-full.qcow2
-kernel ./kernel8.img
-m 1G -smp 4 -serial stdio -usb -device usb-mouse -device usb-kbd

I get :
[ 74.994834] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 76.281274] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
Illegal instruction (core dumped)

When I use GDB I see this:

Thread 8 "qemu-system-aar" received signal SIGILL, Illegal instruction.
[Switching to Thread 0x7fad7f9ba0 (LWP 28037)]
0x0000007f888ac690 in code_gen_buffer ()
(gdb) bt
#0 0x0000007f888ac690 in code_gen_buffer ()
#1 0x0000005555d7c038 in cpu_tb_exec (tb_exit=, itb=, cpu=0x7fb4502c40)
at ../accel/tcg/cpu-exec.c:191
#2 cpu_loop_exec_tb (tb_exit=, last_tb=, tb=, cpu=0x7fb4502c40)
at ../accel/tcg/cpu-exec.c:708
#3 cpu_exec (cpu=cpu@entry=0x7fb4502c40) at ../accel/tcg/cpu-exec.c:819
..

I have just two questions:

Is this a problem with QEMU or is there anything specific build or
options I need to use. Any specific version of QEMU should be used ?

Why is TCG used as the accelerator when KVM is present. Is it possible
and how to use KVM ?

If I enabled the KVM then I get this error:

../build/qemu-system-aarch64 -M raspi3 -enable-kvm -append "rw earlyprintk loglevel=8 console=ttyAMA0,115200 dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootdelay=1" -dtb ./bcm2710-rpi-3-b-plus.dtb -sd /media/96747D21747D0571/JetsonNano/2020-08-20-raspios-buster-armhf-full.qcow2 -kernel ./kernel8.img -m 1G -smp 4 -serial stdio -usb -device usb-mouse -device usb-kbd
WARNING: Image format was not specified for '/media/96747D21747D0571/JetsonNano/2020-08-20-raspios-buster-armhf-full.img' and probing guessed raw.
         Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
         Specify the 'raw' format explicitly to remove the restrictions.
qemu-system-aarch64: ../softmmu/physmem.c:750: cpu_address_space_init: Assertion `asidx == 0 || !kvm_enabled()' failed.

Thanks a lot.

** Affects: qemu
     Importance: Undecided
         Status: New

** Tags: tcg

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1916112

Title:
  Illegal instruction crash of QEMU on Jetson Nano

Status in QEMU:
  New

Bug description:
  I have a jetson nano (arm64 SBC) and I want to check the native
  emulation performance of Raspbian Buster. I used the info available
  here:

  https://github.com/dhruvvyas90/qemu-rpi-kernel/tree/master/native-
  emuation

  I have Xubuntut 20.04 with KVM enabled kernel running on the Jetson
  Nano

  However QEMU crashes with "Illegal Instruction" during kernel boot. I
  have a built latest QEMU from sources with following configuration

  ./configure --prefix=/usr/local --target-list=aarch64-softmmu,arm-
  softmmu  --enable-guest-agent --enable-vnc  --enable-vnc-jpeg
  --enable-vnc-png --enable-kvm --enable-spice --enable-sdl --enable-gtk
  --enable-virglrenderer --enable-opengl

  qemu-system-aarch64 --version
  QEMU emulator version 5.2.50 (v5.2.0-1731-g5b19cb63d9)

  When I run as follows:

  ../build/qemu-system-aarch64 -M raspi3
  -append "rw earlyprintk loglevel=8 console=ttyAMA0,115200 dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootdelay=1"
  -dtb ./bcm2710-rpi-3-b-plus.dtb
  -sd /media/96747D21747D0571/JetsonNano/2020-08-20-raspios-buster-armhf-full.qcow2
  -kernel ./kernel8.img
  -m 1G -smp 4 -serial stdio -usb -device usb-mouse -device usb-kbd

  I get :
  [ 74.994834] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
  [ 76.281274] systemd[1]: Starting Apply Kernel Variables...
  Starting Apply Kernel Variables...
  Illegal instruction (core dumped)

  When I use GDB I see this:

  Thread 8 "qemu-system-aar" received signal SIGILL, Illegal instruction.
  [Switching to Thread 0x7fad7f9ba0 (LWP 28037)]
  0x0000007f888ac690 in code_gen_buffer ()
  (gdb) bt
  #0 0x0000007f888ac690 in code_gen_buffer ()
  #1 0x0000005555d7c038 in cpu_tb_exec (tb_exit=, itb=, cpu=0x7fb4502c40)
  at ../accel/tcg/cpu-exec.c:191
  #2 cpu_loop_exec_tb (tb_exit=, last_tb=, tb=, cpu=0x7fb4502c40)
  at ../accel/tcg/cpu-exec.c:708
  #3 cpu_exec (cpu=cpu@entry=0x7fb4502c40) at ../accel/tcg/cpu-exec.c:819
  ..

  I have just two questions:

  Is this a problem with QEMU or is there anything specific build or
  options I need to use. Any specific version of QEMU should be used ?

  Why is TCG used as the accelerator when KVM is present. Is it possible
  and how to use KVM ?

  If I enabled the KVM then I get this error:

  ../build/qemu-system-aarch64 -M raspi3 -enable-kvm -append "rw earlyprintk loglevel=8 console=ttyAMA0,115200 dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootdelay=1" -dtb ./bcm2710-rpi-3-b-plus.dtb -sd /media/96747D21747D0571/JetsonNano/2020-08-20-raspios-buster-armhf-full.qcow2 -kernel ./kernel8.img -m 1G -smp 4 -serial stdio -usb -device usb-mouse -device usb-kbd
  WARNING: Image format was not specified for '/media/96747D21747D0571/JetsonNano/2020-08-20-raspios-buster-armhf-full.img' and probing guessed raw.
           Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
           Specify the 'raw' format explicitly to remove the restrictions.
  qemu-system-aarch64: ../softmmu/physmem.c:750: cpu_address_space_init: Assertion `asidx == 0 || !kvm_enabled()' failed.

  Thanks a lot.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1916112/+subscriptions

^ permalink raw reply	[flat|nested] 13+ messages in thread