qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: James Hogan <james.hogan@imgtec.com>
To: Richard Henderson <rth@twiddle.net>
Cc: qemu-devel@nongnu.org, aurelien@aurel32.net
Subject: Re: [Qemu-devel] [PATCH 11/15] tcg-mips: Use mips64r6 instructions in tcg_out_movi
Date: Wed, 10 Feb 2016 00:32:51 +0000	[thread overview]
Message-ID: <20160210003251.GE3678@jhogan-linux.le.imgtec.org> (raw)
In-Reply-To: <20160209165052.GC3678@jhogan-linux.le.imgtec.org>

[-- Attachment #1: Type: text/plain, Size: 3254 bytes --]

Hi Richard,

On Tue, Feb 09, 2016 at 04:50:52PM +0000, James Hogan wrote:
> > @@ -589,6 +608,50 @@ static void tcg_out_movi(TCGContext *s, TCGType type,
> >      }
> >      if (TCG_TARGET_REG_BITS == 32 || arg == (int32_t)arg) {
> >          tcg_out_opc_imm(s, OPC_LUI, ret, TCG_REG_ZERO, arg >> 16);
> > +    } else if (use_mips32r6_instructions) {
> > +        tcg_target_long disp = arg - (intptr_t)s->code_ptr;
> > +        if (disp == sextract32(disp, 2, 19) * 4) {
> > +            tcg_out_opc_pc19(s, OPC_ADDIUPC, ret, disp >> 2);
> > +            return;
> > +        } else if ((disp & ~(tcg_target_long)0xffff)
> > +                   == sextract32(disp, 16, 16) * 0x10000) {
> > +            tcg_out_opc_imm(s, OPC_ALUIPC, ret, 0, disp >> 16);
> 
> I think ret and 0 are the wrong way around here. You're putting 0 in rs
> (the destination register), which causes a seg fault.
> 
> OUT: [size=56] 
> 0xfff30b0064:  lw       s1,-8(s0) 
> 0xfff30b0068:  bnezalc  zero,s1,0xfff30b0090 
> 0xfff30b006c:  nop 
> 0xfff30b0070:  j        0xfff0000000 
> 0xfff30b0074:  nop 
> 0xfff30b0078:  lui      s1,0xbfc0 
> 0xfff30b007c:  ori      s1,s1,0x580 
> 0xfff30b0080:  sd       s1,256(s0) 
> 0xfff30b0084:  aluipc   zero,0xfeb7 
> 0xfff30b0088:  j        0xfff30b0034 
> 0xfff30b008c:  ori      v0,v0,0x4010 
> 0xfff30b0090:  aluipc   zero,0xfeb7 
> 0xfff30b0094:  j        0xfff30b0034 
> 0xfff30b0098:  ori      v0,v0,0x4013

Actually, still not quite right.

ALUIPC does
dest <- ~0xffff & (PC + sign_extend(imm16<<16))

which is effectively
dest <- PC & ~0xffff + sign_extend(imm16<<16)

so disp should be between arg and code_ptr & ~0xffff, i.e. something
like this I think:

diff --git a/tcg/mips/tcg-target.c b/tcg/mips/tcg-target.c
index 8205ea4e159f..9a5d31478797 100644
--- a/tcg/mips/tcg-target.c
+++ b/tcg/mips/tcg-target.c
@@ -666,12 +666,13 @@ static void tcg_out_movi(TCGContext *s, TCGType type,
         tcg_out_opc_imm(s, OPC_LUI, ret, TCG_REG_ZERO, arg >> 16);
     } else if (use_mips32r6_instructions) {
         tcg_target_long disp = arg - (intptr_t)s->code_ptr;
+        tcg_target_long disphi = arg - ((intptr_t)s->code_ptr & ~(tcg_target_long)0xffff);
         if (disp == sextract32(disp, 2, 19) * 4) {
             tcg_out_opc_pc19(s, OPC_ADDIUPC, ret, disp >> 2);
             return;
-        } else if ((disp & ~(tcg_target_long)0xffff)
-                   == sextract32(disp, 16, 16) * 0x10000) {
-            tcg_out_opc_imm(s, OPC_ALUIPC, 0, ret, disp >> 16);
+        } else if ((disphi & ~(tcg_target_long)0xffff)
+                   == sextract32(disphi, 16, 16) * 0x10000) {
+            tcg_out_opc_imm(s, OPC_ALUIPC, 0, ret, disphi >> 16);
         } else {
             TCGReg in = TCG_REG_ZERO;
             tcg_target_long tmp = (int16_t)arg;

Otherwise, in this case its trying to load the immediate 0xfff1c30000
relative to 0xfff30b0084, and calculates a disp of FEB7FF7C, which is
truncated to 0xFEB7. The result is then:
0xfff30b0000 + (int)0xfeb70000 = 0xfff1c20000
which is off by 64KiB.

With the above change we get:
disphi = 0xfeb80000
and the result is then:
0xfff30b0000 + (int)0xfeb80000 = 0xfff1c30000

Cheers
James

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  parent reply	other threads:[~2016-02-10  0:32 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-09 10:39 [Qemu-devel] [PATCH 00/15] tcg mips64 and mipsr6 improvements Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 01/15] tcg-mips: Add mips64 opcodes Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 02/15] tcg-mips: Support 64-bit opcodes Richard Henderson
2016-02-09 15:24   ` James Hogan
2016-02-09 17:16     ` Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 03/15] tcg-mips: Adjust move functions for mips64 Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 04/15] tcg-mips: Adjust load/store " Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 05/15] tcg-mips: Adjust prologue " Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 06/15] tcg-mips: Add tcg unwind info Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 07/15] tcg-mips: Adjust qemu_ld/st for mips64 Richard Henderson
2016-02-10 16:34   ` James Hogan
2016-02-10 17:35     ` Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 08/15] tcg-mips: Adjust calling conventions " Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 09/15] tcg-mips: Fix exit_tb " Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 10/15] tcg-mips: Move bswap code to subroutines Richard Henderson
2016-02-09 10:39 ` [Qemu-devel] [PATCH 11/15] tcg-mips: Use mips64r6 instructions in tcg_out_movi Richard Henderson
2016-02-09 16:50   ` James Hogan
2016-02-09 17:20     ` Richard Henderson
2016-02-09 17:25     ` Richard Henderson
2016-02-10  0:32     ` James Hogan [this message]
2016-02-09 10:40 ` [Qemu-devel] [PATCH 12/15] tcg-mips: Use mips64r6 instructions in tcg_out_ldst Richard Henderson
2016-02-09 10:40 ` [Qemu-devel] [PATCH 13/15] tcg-mips: Use mips64r6 instructions in constant addition Richard Henderson
2016-02-09 10:40 ` [Qemu-devel] [PATCH 14/15] tcg-mips: Use mipsr6 instructions in branches Richard Henderson
2016-02-09 16:22   ` James Hogan
2016-02-09 17:13     ` Richard Henderson
2016-02-09 18:46       ` Maciej W. Rozycki
2016-02-10  0:20     ` James Hogan
2016-02-09 10:40 ` [Qemu-devel] [PATCH 15/15] tcg-mips: Use mipsr6 instructions in calls Richard Henderson
2016-02-10 12:49   ` James Hogan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160210003251.GE3678@jhogan-linux.le.imgtec.org \
    --to=james.hogan@imgtec.com \
    --cc=aurelien@aurel32.net \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    --subject='Re: [Qemu-devel] [PATCH 11/15] tcg-mips: Use mips64r6 instructions in tcg_out_movi' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox