[Qemu-devel] [PULL 03/22] pcie: work around for racy guest init

["Michael S. Tsirkin" <mst@redhat.com>]

During boot, linux guests tend to clear all bits in pcie slot status
register which is used for hotplug.
If they clear bits that weren't set this is racy and will lose events:
not a big problem for manual hotplug on bare-metal, but a problem for us.

For example, the following is broken ATM:

/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35  \
    -device pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \
    -device virtio-balloon-pci,id=balloon,bus=pcie_root_port_0 \
    -monitor stdio disk.qcow2
(qemu)device_del balloon
(qemu)cont

Balloon isn't deleted as it should.

As a work-around, detect this attempt to clear slot status and revert
status to what it was before the write.

Note: in theory this can be detected as a duplicate button press
which cancels the previous press. Does not seem to happen in
practice as guests seem to only have this bug during init.

Note2: the right thing to do is probably to fix Linux to
read status before clearing it, and act on the bits that are set.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
---
 hw/pci/pcie.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
index f8490a00de..c605d32dd4 100644
--- a/hw/pci/pcie.c
+++ b/hw/pci/pcie.c
@@ -610,6 +610,25 @@ void pcie_cap_slot_write_config(PCIDevice *dev, uint16_t slt_ctl, uint16_t slt_s
     uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
 
     if (ranges_overlap(addr, len, pos + PCI_EXP_SLTSTA, 2)) {
+        /*
+         * Guests tend to clears all bits during init.
+         * If they clear bits that weren't set this is racy and will lose events:
+         * not a big problem for manual button presses, but a problem for us.
+         * As a work-around, detect this and revert status to what it was
+         * before the write.
+         *
+         * Note: in theory this can be detected as a duplicate button press
+         * which cancels the previous press. Does not seem to happen in
+         * practice as guests seem to only have this bug during init.
+         */
+#define PCIE_SLOT_EVENTS (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD | \
+                          PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC | \
+                          PCI_EXP_SLTSTA_CC)
+
+        if (val & ~slt_sta & PCIE_SLOT_EVENTS) {
+            sltsta = (sltsta & ~PCIE_SLOT_EVENTS) | (slt_sta & PCIE_SLOT_EVENTS);
+            pci_set_word(exp_cap + PCI_EXP_SLTSTA, sltsta);
+        }
         hotplug_event_clear(dev);
     }
 
-- 
MST