qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: qemu-devel@nongnu.org
Cc: Igor Mammedov <imammedo@redhat.com>,
	David Gibson <david@gibson.dropbear.id.au>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	David Hildenbrand <david@redhat.com>
Subject: [Qemu-devel] [PATCH v1 2/3] virtio-balloon: Better names for offset variables in inflate/deflate code
Date: Fri, 19 Jul 2019 18:01:19 +0200	[thread overview]
Message-ID: <20190719160120.26581-3-david@redhat.com> (raw)
In-Reply-To: <20190719160120.26581-1-david@redhat.com>

"host_page_base" is really confusing, let's make this clearer, also
rename the other offsets to indicate to which base they apply.

offset -> mr_offset
ram_offset -> rb_offset
host_page_base -> rb_aligned_offset

While at it, use QEMU_ALIGN_DOWN() instead of a handcrafted computation
and move the computation to the place where it is needed.

Signed-off-by: David Hildenbrand <david@redhat.com>
---
 hw/virtio/virtio-balloon.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
index 287d5d4c97..29cee344b2 100644
--- a/hw/virtio/virtio-balloon.c
+++ b/hw/virtio/virtio-balloon.c
@@ -47,24 +47,23 @@ static void virtio_balloon_reset_pbp(VirtIOBalloon *balloon)
 }
 
 static void balloon_inflate_page(VirtIOBalloon *balloon,
-                                 MemoryRegion *mr, hwaddr offset)
+                                 MemoryRegion *mr, hwaddr mr_offset)
 {
-    void *addr = memory_region_get_ram_ptr(mr) + offset;
+    void *addr = memory_region_get_ram_ptr(mr) + mr_offset;
+    ram_addr_t rb_offset, rb_aligned_offset;
     RAMBlock *rb;
     size_t rb_page_size;
     int subpages;
-    ram_addr_t ram_offset, host_page_base;
 
     /* XXX is there a better way to get to the RAMBlock than via a
      * host address? */
-    rb = qemu_ram_block_from_host(addr, false, &ram_offset);
+    rb = qemu_ram_block_from_host(addr, false, &rb_offset);
     rb_page_size = qemu_ram_pagesize(rb);
-    host_page_base = ram_offset & ~(rb_page_size - 1);
 
     if (rb_page_size == BALLOON_PAGE_SIZE) {
         /* Easy case */
 
-        ram_block_discard_range(rb, ram_offset, rb_page_size);
+        ram_block_discard_range(rb, rb_offset, rb_page_size);
         /* We ignore errors from ram_block_discard_range(), because it
          * has already reported them, and failing to discard a balloon
          * page is not fatal */
@@ -80,11 +79,12 @@ static void balloon_inflate_page(VirtIOBalloon *balloon,
     warn_report_once(
 "Balloon used with backing page size > 4kiB, this may not be reliable");
 
+    rb_aligned_offset = QEMU_ALIGN_DOWN(rb_offset, rb_page_size);
     subpages = rb_page_size / BALLOON_PAGE_SIZE;
 
     if (balloon->pbp
         && (rb != balloon->pbp->rb
-            || host_page_base != balloon->pbp->base)) {
+            || rb_aligned_offset != balloon->pbp->base)) {
         /* We've partially ballooned part of a host page, but now
          * we're trying to balloon part of a different one.  Too hard,
          * give up on the old partial page */
@@ -96,10 +96,10 @@ static void balloon_inflate_page(VirtIOBalloon *balloon,
         size_t bitlen = BITS_TO_LONGS(subpages) * sizeof(unsigned long);
         balloon->pbp = g_malloc0(sizeof(PartiallyBalloonedPage) + bitlen);
         balloon->pbp->rb = rb;
-        balloon->pbp->base = host_page_base;
+        balloon->pbp->base = rb_aligned_offset;
     }
 
-    set_bit((ram_offset - balloon->pbp->base) / BALLOON_PAGE_SIZE,
+    set_bit((rb_offset - balloon->pbp->base) / BALLOON_PAGE_SIZE,
             balloon->pbp->bitmap);
 
     if (bitmap_full(balloon->pbp->bitmap, subpages)) {
@@ -116,18 +116,18 @@ static void balloon_inflate_page(VirtIOBalloon *balloon,
 }
 
 static void balloon_deflate_page(VirtIOBalloon *balloon,
-                                 MemoryRegion *mr, hwaddr offset)
+                                 MemoryRegion *mr, hwaddr mr_offset)
 {
-    void *addr = memory_region_get_ram_ptr(mr) + offset;
+    void *addr = memory_region_get_ram_ptr(mr) + mr_offset;
+    ram_addr_t rb_offset;
     RAMBlock *rb;
     size_t rb_page_size;
-    ram_addr_t ram_offset;
     void *host_addr;
     int ret;
 
     /* XXX is there a better way to get to the RAMBlock than via a
      * host address? */
-    rb = qemu_ram_block_from_host(addr, false, &ram_offset);
+    rb = qemu_ram_block_from_host(addr, false, &rb_offset);
     rb_page_size = qemu_ram_pagesize(rb);
 
     if (balloon->pbp) {
-- 
2.21.0



  parent reply	other threads:[~2019-07-19 16:05 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-19 16:01 [Qemu-devel] [PATCH v1 0/3] virtio-balloon: PartialBalloonedPage rework David Hildenbrand
2019-07-19 16:01 ` [Qemu-devel] [PATCH v1 1/3] virtio-balloon: simplify deflate with pbp David Hildenbrand
2019-07-22  2:27   ` David Gibson
2019-07-19 16:01 ` David Hildenbrand [this message]
2019-07-22  2:29   ` [Qemu-devel] [PATCH v1 2/3] virtio-balloon: Better names for offset variables in inflate/deflate code David Gibson
2019-07-19 16:01 ` [Qemu-devel] [PATCH v1 3/3] virtio-balloon: Rework pbp tracking data David Hildenbrand
2019-07-22  3:04   ` David Gibson
2019-07-22  7:43     ` David Hildenbrand
2019-07-22  8:14       ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190719160120.26581-3-david@redhat.com \
    --to=david@redhat.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=imammedo@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).