From: "Alex Bennée" <alex.bennee@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Richard Henderson" <richard.henderson@linaro.org>,
armbru@redhat.com, "Alex Bennée" <alex.bennee@linaro.org>,
"Aurelien Jarno" <aurelien@aurel32.net>
Subject: [Qemu-devel] [PATCH v3 08/13] fpu: move inline helpers into a separate header
Date: Tue, 13 Aug 2019 13:49:41 +0100 [thread overview]
Message-ID: <20190813124946.25322-9-alex.bennee@linaro.org> (raw)
In-Reply-To: <20190813124946.25322-1-alex.bennee@linaro.org>
There are a bunch of users of the inline helpers who do not need
access to the entire softfloat API. Move those inline helpers into a
new header file which can be included without bringing in the rest of
the world.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
v2
- don't squash up quite so much
---
include/fpu/softfloat-helpers.h | 132 ++++++++++++++++++++++++++++++++
include/fpu/softfloat.h | 63 +--------------
2 files changed, 133 insertions(+), 62 deletions(-)
create mode 100644 include/fpu/softfloat-helpers.h
diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h
new file mode 100644
index 00000000000..e0baf24c8f5
--- /dev/null
+++ b/include/fpu/softfloat-helpers.h
@@ -0,0 +1,132 @@
+/*
+ * QEMU float support - standalone helpers
+ *
+ * This is provided for files that don't need the access to the full
+ * set of softfloat functions. Typically this is cpu initialisation
+ * code which wants to set default rounding and exceptions modes.
+ *
+ * The code in this source file is derived from release 2a of the SoftFloat
+ * IEC/IEEE Floating-point Arithmetic Package. Those parts of the code (and
+ * some later contributions) are provided under that license, as detailed below.
+ * It has subsequently been modified by contributors to the QEMU Project,
+ * so some portions are provided under:
+ * the SoftFloat-2a license
+ * the BSD license
+ * GPL-v2-or-later
+ *
+ * Any future contributions to this file after December 1st 2014 will be
+ * taken to be licensed under the Softfloat-2a license unless specifically
+ * indicated otherwise.
+ */
+
+/*
+===============================================================================
+This C header file is part of the SoftFloat IEC/IEEE Floating-point
+Arithmetic Package, Release 2a.
+
+Written by John R. Hauser. This work was made possible in part by the
+International Computer Science Institute, located at Suite 600, 1947 Center
+Street, Berkeley, California 94704. Funding was partially provided by the
+National Science Foundation under grant MIP-9311980. The original version
+of this code was written as part of a project to build a fixed-point vector
+processor in collaboration with the University of California at Berkeley,
+overseen by Profs. Nelson Morgan and John Wawrzynek. More information
+is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
+arithmetic/SoftFloat.html'.
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
+has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO
+PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+
+Derivative works are acceptable, even for commercial purposes, so long as
+(1) they include prominent notice that the work is derivative, and (2) they
+include prominent notice akin to these four paragraphs for those parts of
+this code that are retained.
+
+===============================================================================
+*/
+
+#ifndef _SOFTFLOAT_HELPERS_H_
+#define _SOFTFLOAT_HELPERS_H_
+
+#include "fpu/softfloat-types.h"
+
+static inline void set_float_detect_tininess(int val, float_status *status)
+{
+ status->float_detect_tininess = val;
+}
+
+static inline void set_float_rounding_mode(int val, float_status *status)
+{
+ status->float_rounding_mode = val;
+}
+
+static inline void set_float_exception_flags(int val, float_status *status)
+{
+ status->float_exception_flags = val;
+}
+
+static inline void set_floatx80_rounding_precision(int val,
+ float_status *status)
+{
+ status->floatx80_rounding_precision = val;
+}
+
+static inline void set_flush_to_zero(flag val, float_status *status)
+{
+ status->flush_to_zero = val;
+}
+
+static inline void set_flush_inputs_to_zero(flag val, float_status *status)
+{
+ status->flush_inputs_to_zero = val;
+}
+
+static inline void set_default_nan_mode(flag val, float_status *status)
+{
+ status->default_nan_mode = val;
+}
+
+static inline void set_snan_bit_is_one(flag val, float_status *status)
+{
+ status->snan_bit_is_one = val;
+}
+
+static inline int get_float_detect_tininess(float_status *status)
+{
+ return status->float_detect_tininess;
+}
+
+static inline int get_float_rounding_mode(float_status *status)
+{
+ return status->float_rounding_mode;
+}
+
+static inline int get_float_exception_flags(float_status *status)
+{
+ return status->float_exception_flags;
+}
+
+static inline int get_floatx80_rounding_precision(float_status *status)
+{
+ return status->floatx80_rounding_precision;
+}
+
+static inline flag get_flush_to_zero(float_status *status)
+{
+ return status->flush_to_zero;
+}
+
+static inline flag get_flush_inputs_to_zero(float_status *status)
+{
+ return status->flush_inputs_to_zero;
+}
+
+static inline flag get_default_nan_mode(float_status *status)
+{
+ return status->default_nan_mode;
+}
+
+#endif /* _SOFTFLOAT_HELPERS_H_ */
diff --git a/include/fpu/softfloat.h b/include/fpu/softfloat.h
index d9333eb65b8..ecb8ba01149 100644
--- a/include/fpu/softfloat.h
+++ b/include/fpu/softfloat.h
@@ -93,68 +93,7 @@ enum {
};
#include "fpu/softfloat-types.h"
-
-static inline void set_float_detect_tininess(int val, float_status *status)
-{
- status->float_detect_tininess = val;
-}
-static inline void set_float_rounding_mode(int val, float_status *status)
-{
- status->float_rounding_mode = val;
-}
-static inline void set_float_exception_flags(int val, float_status *status)
-{
- status->float_exception_flags = val;
-}
-static inline void set_floatx80_rounding_precision(int val,
- float_status *status)
-{
- status->floatx80_rounding_precision = val;
-}
-static inline void set_flush_to_zero(flag val, float_status *status)
-{
- status->flush_to_zero = val;
-}
-static inline void set_flush_inputs_to_zero(flag val, float_status *status)
-{
- status->flush_inputs_to_zero = val;
-}
-static inline void set_default_nan_mode(flag val, float_status *status)
-{
- status->default_nan_mode = val;
-}
-static inline void set_snan_bit_is_one(flag val, float_status *status)
-{
- status->snan_bit_is_one = val;
-}
-static inline int get_float_detect_tininess(float_status *status)
-{
- return status->float_detect_tininess;
-}
-static inline int get_float_rounding_mode(float_status *status)
-{
- return status->float_rounding_mode;
-}
-static inline int get_float_exception_flags(float_status *status)
-{
- return status->float_exception_flags;
-}
-static inline int get_floatx80_rounding_precision(float_status *status)
-{
- return status->floatx80_rounding_precision;
-}
-static inline flag get_flush_to_zero(float_status *status)
-{
- return status->flush_to_zero;
-}
-static inline flag get_flush_inputs_to_zero(float_status *status)
-{
- return status->flush_inputs_to_zero;
-}
-static inline flag get_default_nan_mode(float_status *status)
-{
- return status->default_nan_mode;
-}
+#include "fpu/softfloat-helpers.h"
/*----------------------------------------------------------------------------
| Routine to raise any or all of the software IEC/IEEE floating-point
--
2.20.1
next prev parent reply other threads:[~2019-08-13 12:54 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-13 12:49 [Qemu-devel] [PATCH v3 00/13] softfloat updates (include tweaks, rm LIT64) Alex Bennée
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 01/13] fpu: replace LIT64 usage with UINT64_C for specialize constants Alex Bennée
2019-08-13 12:59 ` Richard Henderson
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 02/13] fpu: convert float[16/32/64]_squash_denormal to new modern style Alex Bennée
2019-08-13 13:11 ` Richard Henderson
2019-08-13 13:38 ` Alex Bennée
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 03/13] fpu: optimise float[16/32/64]_squash_denormal (HACK?) Alex Bennée
2019-08-13 13:12 ` Richard Henderson
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 04/13] fpu: use min/max values from stdint.h for integral overflow Alex Bennée
2019-08-13 13:13 ` Richard Henderson
2019-08-15 14:48 ` Aleksandar Markovic
2019-08-15 15:49 ` Alex Bennée
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 05/13] fpu: replace LIT64 with UINT64_C macros Alex Bennée
2019-08-13 13:14 ` Richard Henderson
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 06/13] target/m68k: " Alex Bennée
2019-08-13 13:15 ` Richard Henderson
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 07/13] fpu: remove the LIT64 macro Alex Bennée
2019-08-13 13:15 ` Richard Henderson
2019-08-13 12:49 ` Alex Bennée [this message]
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 09/13] fpu: make softfloat-macros "self-contained" Alex Bennée
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 10/13] fpu: rename softfloat-specialize.h -> .inc.c Alex Bennée
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 11/13] target/mips: rationalise softfloat includes Alex Bennée
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 12/13] target/riscv: " Alex Bennée
2019-08-13 13:05 ` Philippe Mathieu-Daudé
2019-08-13 12:49 ` [Qemu-devel] [PATCH v3 13/13] targets (various): use softfloat-helpers.h where we can Alex Bennée
2019-08-13 13:15 ` Philippe Mathieu-Daudé
2019-08-13 13:19 ` [Qemu-devel] [PATCH v3 00/13] softfloat updates (include tweaks, rm LIT64) no-reply
2019-08-13 13:30 ` no-reply
2019-08-13 13:57 ` Markus Armbruster
2019-08-13 14:15 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190813124946.25322-9-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=armbru@redhat.com \
--cc=aurelien@aurel32.net \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).