qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
To: <qemu-devel@nongnu.org>, <qemu-arm@nongnu.org>,
	<eric.auger@redhat.com>, <imammedo@redhat.com>
Cc: peter.maydell@linaro.org, sameo@linux.intel.com,
	ard.biesheuvel@linaro.org, linuxarm@huawei.com,
	xuwei5@hisilicon.com, shannon.zhaosl@gmail.com,
	sebastien.boeuf@intel.com, lersek@redhat.com
Subject: [Qemu-devel] [PATCH-for-4.2 v9 06/12] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
Date: Tue, 13 Aug 2019 22:05:33 +0100	[thread overview]
Message-ID: <20190813210539.31164-7-shameerali.kolothum.thodi@huawei.com> (raw)
In-Reply-To: <20190813210539.31164-1-shameerali.kolothum.thodi@huawei.com>

This initializes the GED device with base memory and irq, configures
ged memory hotplug event and builds the corresponding aml code. With
this, both hot and cold plug of device memory is enabled now for Guest
with ACPI boot.

Memory cold plug support with Guest DT boot is not yet supported.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
v8 --> v9
 -Changes related to GED being a TYPE_SYS_BUS_DEVICE now.
 -Error propagation to _plug() handler.
 -Removed R-by by Eric for now.

v7 --> v8
 -Changed no_acpi_dev to no_ged.
 -Fixed 'dev' reference leak by object_new().
 -Updated bios-tables-test-allowed-diff.h to avoid "make check"
  failure.

---
 hw/arm/Kconfig                        |  2 +
 hw/arm/virt-acpi-build.c              | 16 +++++++
 hw/arm/virt.c                         | 62 ++++++++++++++++++++++++---
 include/hw/arm/virt.h                 |  4 ++
 tests/bios-tables-test-allowed-diff.h |  1 +
 5 files changed, 78 insertions(+), 7 deletions(-)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 84961c17ab..ad7f7c089b 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -22,6 +22,8 @@ config ARM_VIRT
     select ACPI_PCI
     select MEM_DEVICE
     select DIMM
+    select ACPI_MEMORY_HOTPLUG
+    select ACPI_HW_REDUCED
 
 config CHEETAH
     bool
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 0afb372769..63fa845076 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -40,6 +40,8 @@
 #include "hw/acpi/aml-build.h"
 #include "hw/acpi/utils.h"
 #include "hw/acpi/pci.h"
+#include "hw/acpi/memory_hotplug.h"
+#include "hw/acpi/generic_event_device.h"
 #include "hw/pci/pcie_host.h"
 #include "hw/pci/pci.h"
 #include "hw/arm/virt.h"
@@ -705,6 +707,7 @@ static void
 build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
     Aml *scope, *dsdt;
+    MachineState *ms = MACHINE(vms);
     const MemMapEntry *memmap = vms->memmap;
     const int *irqmap = vms->irqmap;
 
@@ -729,6 +732,19 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                       vms->highmem, vms->highmem_ecam);
     acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO],
                        (irqmap[VIRT_GPIO] + ARM_SPI_BASE));
+    if (vms->acpi_dev) {
+        build_ged_aml(scope, "\\_SB."GED_DEVICE,
+                      HOTPLUG_HANDLER(vms->acpi_dev),
+                      irqmap[VIRT_ACPI_GED] + ARM_SPI_BASE, AML_SYSTEM_MEMORY,
+                      memmap[VIRT_ACPI_GED].base);
+    }
+
+    if (vms->acpi_dev && ms->ram_slots) {
+        build_memory_hotplug_aml(scope, ms->ram_slots, "\\_SB", NULL,
+                                 AML_SYSTEM_MEMORY,
+                                 memmap[VIRT_PCDIMM_ACPI].base);
+    }
+
     acpi_dsdt_add_power_button(scope);
 
     aml_append(dsdt, scope);
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index ef65e721d2..0949a227a9 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -66,6 +66,7 @@
 #include "target/arm/internals.h"
 #include "hw/mem/pc-dimm.h"
 #include "hw/mem/nvdimm.h"
+#include "hw/acpi/generic_event_device.h"
 
 #define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
     static void virt_##major##_##minor##_class_init(ObjectClass *oc, \
@@ -136,6 +137,8 @@ static const MemMapEntry base_memmap[] = {
     [VIRT_GPIO] =               { 0x09030000, 0x00001000 },
     [VIRT_SECURE_UART] =        { 0x09040000, 0x00001000 },
     [VIRT_SMMU] =               { 0x09050000, 0x00020000 },
+    [VIRT_PCDIMM_ACPI] =        { 0x09070000, MEMORY_HOTPLUG_IO_LEN },
+    [VIRT_ACPI_GED] =           { 0x09080000, ACPI_GED_EVT_SEL_LEN },
     [VIRT_MMIO] =               { 0x0a000000, 0x00000200 },
     /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */
     [VIRT_PLATFORM_BUS] =       { 0x0c000000, 0x02000000 },
@@ -171,6 +174,7 @@ static const int a15irqmap[] = {
     [VIRT_PCIE] = 3, /* ... to 6 */
     [VIRT_GPIO] = 7,
     [VIRT_SECURE_UART] = 8,
+    [VIRT_ACPI_GED] = 9,
     [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */
     [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */
     [VIRT_SMMU] = 74,    /* ...to 74 + NUM_SMMU_IRQS - 1 */
@@ -520,6 +524,26 @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms)
     }
 }
 
+static inline DeviceState *create_acpi_ged(VirtMachineState *vms, qemu_irq *pic)
+{
+    DeviceState *dev;
+    int irq = vms->irqmap[VIRT_ACPI_GED];
+    uint32_t event = ACPI_GED_MEM_HOTPLUG_EVT;
+
+    dev = qdev_create(NULL, TYPE_ACPI_GED);
+    qdev_prop_set_uint32(dev, "ged-event", event);
+    object_property_add_child(qdev_get_machine(), "acpi-ged",
+                              OBJECT(dev), NULL);
+    qdev_init_nofail(dev);
+
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_ACPI_GED].base);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, vms->memmap[VIRT_PCDIMM_ACPI].base);
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]);
+
+    return dev;
+}
+
 static void create_its(VirtMachineState *vms, DeviceState *gicdev)
 {
     const char *itsclass = its_class_name();
@@ -1483,6 +1507,7 @@ static void machvirt_init(MachineState *machine)
     MemoryRegion *ram = g_new(MemoryRegion, 1);
     bool firmware_loaded;
     bool aarch64 = true;
+    bool has_ged = !vmc->no_ged;
     unsigned int smp_cpus = machine->smp.cpus;
     unsigned int max_cpus = machine->smp.max_cpus;
 
@@ -1697,6 +1722,10 @@ static void machvirt_init(MachineState *machine)
 
     create_gpio(vms, pic);
 
+    if (has_ged && aarch64 && firmware_loaded && acpi_enabled) {
+        vms->acpi_dev = create_acpi_ged(vms, pic);
+    }
+
     /* Create mmio transports, so the user can create virtio backends
      * (which will be automatically plugged in to the transports). If
      * no backend is created the transport will just sit harmlessly idle.
@@ -1876,14 +1905,23 @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms)
 static void virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
                                  Error **errp)
 {
+    VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
+    const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
+    Error *local_err = NULL;
 
-    /*
-     * The device memory is not yet exposed to the Guest either through
-     * DT or ACPI and hence both cold/hot plug of memory is explicitly
-     * disabled for now.
-     */
-    if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
-        error_setg(errp, "memory cold/hot plug is not yet supported");
+    if (is_nvdimm) {
+        error_setg(errp, "nvdimm is not yet supported");
+        return;
+    }
+
+    if (!vms->acpi_dev) {
+        error_setg(errp, "memory hotplug is not enabled: missing acpi device");
+        return;
+    }
+
+    hotplug_handler_pre_plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
         return;
     }
 
@@ -1893,11 +1931,18 @@ static void virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
 static void virt_memory_plug(HotplugHandler *hotplug_dev,
                              DeviceState *dev, Error **errp)
 {
+    HotplugHandlerClass *hhc;
     VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
     Error *local_err = NULL;
 
     pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err);
+    if (local_err) {
+        goto out;
+    }
 
+    hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi_dev);
+    hhc->plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, &local_err);
+out:
     error_propagate(errp, local_err);
 }
 
@@ -2104,8 +2149,11 @@ DEFINE_VIRT_MACHINE_AS_LATEST(4, 2)
 
 static void virt_machine_4_1_options(MachineClass *mc)
 {
+    VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));
+
     virt_machine_4_2_options(mc);
     compat_props_add(mc->compat_props, hw_compat_4_1, hw_compat_4_1_len);
+    vmc->no_ged = true;
 }
 DEFINE_VIRT_MACHINE(4, 1)
 
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index a72094204e..577ee49b4b 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -77,6 +77,8 @@ enum {
     VIRT_GPIO,
     VIRT_SECURE_UART,
     VIRT_SECURE_MEM,
+    VIRT_PCDIMM_ACPI,
+    VIRT_ACPI_GED,
     VIRT_LOWMEMMAP_LAST,
 };
 
@@ -106,6 +108,7 @@ typedef struct {
     bool claim_edge_triggered_timers;
     bool smbios_old_sys_ver;
     bool no_highmem_ecam;
+    bool no_ged;   /* Machines < 4.2 has no support for ACPI GED device */
 } VirtMachineClass;
 
 typedef struct {
@@ -133,6 +136,7 @@ typedef struct {
     uint32_t iommu_phandle;
     int psci_conduit;
     hwaddr highest_gpa;
+    DeviceState *acpi_dev;
 } VirtMachineState;
 
 #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)
diff --git a/tests/bios-tables-test-allowed-diff.h b/tests/bios-tables-test-allowed-diff.h
index dfb8523c8b..7b4adbc822 100644
--- a/tests/bios-tables-test-allowed-diff.h
+++ b/tests/bios-tables-test-allowed-diff.h
@@ -1 +1,2 @@
 /* List of comma-separated changed AML files to ignore */
+"tests/data/acpi/virt/DSDT",
-- 
2.17.1




  parent reply	other threads:[~2019-08-13 21:10 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-13 21:05 [Qemu-devel] [PATCH-for-4.2 v9 00/12] ARM virt: ACPI memory hotplug support Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 01/12] hw/acpi: Make ACPI IO address space configurable Shameer Kolothum
2019-08-15  8:42   ` Shameerali Kolothum Thodi
2019-08-29  8:45     ` Igor Mammedov
2019-08-29 11:04       ` Shameerali Kolothum Thodi
2019-08-29 12:38         ` Igor Mammedov
2019-08-29 13:45           ` Shameerali Kolothum Thodi
2019-09-01 11:17   ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 02/12] hw/acpi: Do not create memory hotplug method when handler is not defined Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 03/12] hw/acpi: Add ACPI Generic Event Device Support Shameer Kolothum
2019-09-01 11:17   ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 04/12] hw/arm/virt: Add memory hotplug framework Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 05/12] hw/arm/virt: Add 4.2 machine type Shameer Kolothum
2019-08-13 21:05 ` Shameer Kolothum [this message]
2019-09-01 11:18   ` [Qemu-devel] [PATCH-for-4.2 v9 06/12] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot Auger Eric
2019-09-01 11:22     ` Auger Eric
2019-09-02  9:34       ` Shameerali Kolothum Thodi
2019-09-02  9:21     ` Shameerali Kolothum Thodi
2019-09-02  9:32       ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 07/12] hw/arm/virt-acpi-build: Add PC-DIMM in SRAT Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 08/12] hw/arm: Factor out powerdown notifier from GPIO Shameer Kolothum
2019-09-02  7:37   ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 09/12] hw/arm: Use GED for system_powerdown event Shameer Kolothum
2019-09-02  7:37   ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 10/12] docs/specs: Add ACPI GED documentation Shameer Kolothum
2019-09-01 11:20   ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 11/12] tests: add dummy ACPI tables for arm/virt board Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 12/12] tests: Add bios tests to arm/virt Shameer Kolothum
2019-08-14  6:46 ` [Qemu-devel] [PATCH-for-4.2 v9 00/12] ARM virt: ACPI memory hotplug support no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190813210539.31164-7-shameerali.kolothum.thodi@huawei.com \
    --to=shameerali.kolothum.thodi@huawei.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=eric.auger@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=lersek@redhat.com \
    --cc=linuxarm@huawei.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=sameo@linux.intel.com \
    --cc=sebastien.boeuf@intel.com \
    --cc=shannon.zhaosl@gmail.com \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).