QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
* [Qemu-devel] [PATCH v4 0/3] Add Aspeed GPIO controller model
@ 2019-08-16  7:32 Rashmica Gupta
  2019-08-16  7:32 ` [Qemu-devel] [PATCH v5 1/3] hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500 Rashmica Gupta
                   ` (3 more replies)
  0 siblings, 4 replies; 11+ messages in thread
From: Rashmica Gupta @ 2019-08-16  7:32 UTC (permalink / raw)
  To: peter.maydell, qemu-arm
  Cc: andrew, qemu-devel, aik, joel, Rashmica Gupta, clg

v5:
- integrated AspeedGPIOController fields into AspeedGPIOClass
- separated ast2600_3_6v and ast2600_1_8v into two classes

v4:
- proper interupt handling thanks to Andrew
- switch statements for reading and writing suggested by Peter
- some small cleanups suggested by Alexey

v3:
- didn't have each gpio set up as an irq 
- now can't access set AC on ast2400 (only exists on ast2500)
- added ast2600 implementation (patch 3)
- renamed a couple of variables for clarity

v2: Addressed Andrew's feedback, added debounce regs, renamed get/set to
read/write to minimise confusion with a 'set' of registers.

Rashmica Gupta (3):
  hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500
  aspeed: add a GPIO controller to the SoC
  hw/gpio: Add in AST2600 specific implementation

 include/hw/arm/aspeed_soc.h   |    3 +
 include/hw/gpio/aspeed_gpio.h |  100 ++++
 hw/arm/aspeed_soc.c           |   17 +
 hw/gpio/aspeed_gpio.c         | 1006 +++++++++++++++++++++++++++++++++
 hw/gpio/Makefile.objs         |    1 +
 5 files changed, 1127 insertions(+)
 create mode 100644 include/hw/gpio/aspeed_gpio.h
 create mode 100644 hw/gpio/aspeed_gpio.c

-- 
2.20.1



^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-16  7:32 [Qemu-devel] [PATCH v4 0/3] Add Aspeed GPIO controller model Rashmica Gupta
2019-08-16  7:32 ` [Qemu-devel] [PATCH v5 1/3] hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500 Rashmica Gupta
2019-08-16 15:59   ` Cédric Le Goater
2019-08-16  7:32 ` [Qemu-devel] [PATCH v5 2/3] aspeed: add a GPIO controller to the SoC Rashmica Gupta
2019-08-16  7:40   ` Rashmica Gupta
2019-08-16 16:07     ` Cédric Le Goater
2019-08-16 16:00   ` Cédric Le Goater
2019-08-16  7:32 ` [Qemu-devel] [PATCH v5 3/3] hw/gpio: Add in AST2600 specific implementation Rashmica Gupta
2019-08-16 16:01   ` Cédric Le Goater
2019-08-16 16:21 ` [Qemu-devel] [PATCH v4 0/3] Add Aspeed GPIO controller model Cédric Le Goater
2019-08-27  1:33   ` Rashmica Gupta

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git