QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, imammedo@redhat.com,
	richard.henderson@linaro.org,
	Yoshinori Sato <ysato@users.sourceforge.jp>,
	philmd@redhat.com
Subject: [Qemu-devel] [PATCH v23 14/22] hw/intc: RX62N interrupt controller (ICUa)
Date: Sat, 17 Aug 2019 16:36:20 +0900
Message-ID: <20190817073628.94473-15-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <20190817073628.94473-1-ysato@users.sourceforge.jp>

This implementation supported only ICUa.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-6-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 include/hw/intc/rx_icu.h |  56 +++++++
 hw/intc/rx_icu.c         | 379 +++++++++++++++++++++++++++++++++++++++++++++++
 hw/intc/Kconfig          |   3 +
 hw/intc/Makefile.objs    |   1 +
 4 files changed, 439 insertions(+)
 create mode 100644 include/hw/intc/rx_icu.h
 create mode 100644 hw/intc/rx_icu.c

diff --git a/include/hw/intc/rx_icu.h b/include/hw/intc/rx_icu.h
new file mode 100644
index 0000000000..acfcf06aef
--- /dev/null
+++ b/include/hw/intc/rx_icu.h
@@ -0,0 +1,56 @@
+#ifndef RX_ICU_H
+#define RX_ICU_H
+
+#include "qemu-common.h"
+#include "hw/irq.h"
+
+enum TRG_MODE {
+    TRG_LEVEL = 0,
+    TRG_NEDGE = 1,      /* Falling */
+    TRG_PEDGE = 2,      /* Raising */
+    TRG_BEDGE = 3,      /* Both */
+};
+
+struct IRQSource {
+    enum TRG_MODE sense;
+    int level;
+};
+
+enum {
+    /* Software interrupt request */
+    SWI = 27,
+    NR_IRQS = 256,
+};
+
+struct RXICUState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion memory;
+    struct IRQSource src[NR_IRQS];
+    char *icutype;
+    uint32_t nr_irqs;
+    uint32_t *map;
+    uint32_t nr_sense;
+    uint32_t *init_sense;
+
+    uint8_t ir[NR_IRQS];
+    uint8_t dtcer[NR_IRQS];
+    uint8_t ier[NR_IRQS / 8];
+    uint8_t ipr[142];
+    uint8_t dmasr[4];
+    uint16_t fir;
+    uint8_t nmisr;
+    uint8_t nmier;
+    uint8_t nmiclr;
+    uint8_t nmicr;
+    int req_irq;
+    qemu_irq _irq;
+    qemu_irq _fir;
+    qemu_irq _swi;
+};
+typedef struct RXICUState RXICUState;
+
+#define TYPE_RXICU "rx-icu"
+#define RXICU(obj) OBJECT_CHECK(RXICUState, (obj), TYPE_RXICU)
+
+#endif /* RX_ICU_H */
diff --git a/hw/intc/rx_icu.c b/hw/intc/rx_icu.c
new file mode 100644
index 0000000000..ac4dcbfe37
--- /dev/null
+++ b/hw/intc/rx_icu.c
@@ -0,0 +1,379 @@
+/*
+ * RX Interrupt Control Unit
+ *
+ * Warning: Only ICUa is supported.
+ *
+ * Datasheet: RX62N Group, RX621 Group User's Manual: Hardware
+ * (Rev.1.40 R01UH0033EJ0140)
+ *
+ * Copyright (c) 2019 Yoshinori Sato
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/log.h"
+#include "qapi/error.h"
+#include "cpu.h"
+#include "hw/hw.h"
+#include "hw/irq.h"
+#include "hw/sysbus.h"
+#include "hw/registerfields.h"
+#include "hw/qdev-properties.h"
+#include "hw/intc/rx_icu.h"
+#include "migration/vmstate.h"
+#include "qemu/error-report.h"
+
+REG8(IR, 0)
+  FIELD(IR, IR,  0, 1)
+REG8(DTCER, 0x100)
+  FIELD(DTCER, DTCE,  0, 1)
+REG8(IER, 0x200)
+REG8(SWINTR, 0x2e0)
+  FIELD(SWINTR, SWINT, 0, 1)
+REG16(FIR, 0x2f0)
+  FIELD(FIR, FVCT, 0, 8)
+  FIELD(FIR, FIEN, 15, 1)
+REG8(IPR, 0x300)
+  FIELD(IPR, IPR, 0, 4)
+REG8(DMRSR, 0x400)
+REG8(IRQCR, 0x500)
+  FIELD(IRQCR, IRQMD, 2, 2)
+REG8(NMISR, 0x580)
+  FIELD(NMISR, NMIST, 0, 1)
+  FIELD(NMISR, LVDST, 1, 1)
+  FIELD(NMISR, OSTST, 2, 1)
+REG8(NMIER, 0x581)
+  FIELD(NMIER, NMIEN, 0, 1)
+  FIELD(NMIER, LVDEN, 1, 1)
+  FIELD(NMIER, OSTEN, 2, 1)
+REG8(NMICLR, 0x582)
+  FIELD(NMICLR, NMICLR, 0, 1)
+  FIELD(NMICLR, OSTCLR, 2, 1)
+REG8(NMICR, 0x583)
+  FIELD(NMICR, NMIMD, 3, 1)
+
+#define request(icu, n) (icu->ipr[icu->map[n]] << 8 | n)
+
+static void set_irq(RXICUState *icu, int n_IRQ, int req)
+{
+    if ((icu->fir & R_FIR_FIEN_MASK) &&
+        (icu->fir & R_FIR_FVCT_MASK) == n_IRQ) {
+        qemu_set_irq(icu->_fir, req);
+    } else {
+        qemu_set_irq(icu->_irq, req);
+    }
+}
+
+static void rxicu_request(RXICUState *icu, int n_IRQ)
+{
+    int enable;
+
+    enable = icu->ier[n_IRQ / 8] & (1 << (n_IRQ & 7));
+    if (n_IRQ > 0 && enable != 0 && atomic_read(&icu->req_irq) < 0) {
+        atomic_set(&icu->req_irq, n_IRQ);
+        set_irq(icu, n_IRQ, request(icu, n_IRQ));
+    }
+}
+
+static void rxicu_set_irq(void *opaque, int n_IRQ, int level)
+{
+    RXICUState *icu = opaque;
+    struct IRQSource *src;
+    int issue;
+
+    if (n_IRQ >= NR_IRQS) {
+        error_report("%s: IRQ %d out of range", __func__, n_IRQ);
+        return;
+    }
+
+    src = &icu->src[n_IRQ];
+
+    level = (level != 0);
+    switch (src->sense) {
+    case TRG_LEVEL:
+        /* level-sensitive irq */
+        issue = level;
+        src->level = level;
+        break;
+    case TRG_NEDGE:
+        issue = (level == 0 && src->level == 1);
+        src->level = level;
+        break;
+    case TRG_PEDGE:
+        issue = (level == 1 && src->level == 0);
+        src->level = level;
+        break;
+    case TRG_BEDGE:
+        issue = ((level ^ src->level) & 1);
+        src->level = level;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+    if (issue == 0 && src->sense == TRG_LEVEL) {
+        icu->ir[n_IRQ] = 0;
+        if (atomic_read(&icu->req_irq) == n_IRQ) {
+            /* clear request */
+            set_irq(icu, n_IRQ, 0);
+            atomic_set(&icu->req_irq, -1);
+        }
+        return;
+    }
+    if (issue) {
+        icu->ir[n_IRQ] = 1;
+        rxicu_request(icu, n_IRQ);
+    }
+}
+
+static void rxicu_ack_irq(void *opaque, int no, int level)
+{
+    RXICUState *icu = opaque;
+    int i;
+    int n_IRQ;
+    int max_pri;
+
+    n_IRQ = atomic_read(&icu->req_irq);
+    if (n_IRQ < 0) {
+        return;
+    }
+    atomic_set(&icu->req_irq, -1);
+    if (icu->src[n_IRQ].sense != TRG_LEVEL) {
+        icu->ir[n_IRQ] = 0;
+    }
+
+    max_pri = 0;
+    n_IRQ = -1;
+    for (i = 0; i < NR_IRQS; i++) {
+        if (icu->ir[i]) {
+            if (max_pri < icu->ipr[icu->map[i]]) {
+                n_IRQ = i;
+                max_pri = icu->ipr[icu->map[i]];
+            }
+        }
+    }
+
+    if (n_IRQ >= 0) {
+        rxicu_request(icu, n_IRQ);
+    }
+}
+
+static uint64_t icu_read(void *opaque, hwaddr addr, unsigned size)
+{
+    RXICUState *icu = opaque;
+    int reg = addr & 0xff;
+
+    if ((addr != A_FIR && size != 1) ||
+        (addr == A_FIR && size != 2)) {
+        qemu_log_mask(LOG_GUEST_ERROR, "rx_icu: Invalid read size 0x%"
+                      HWADDR_PRIX "\n", addr);
+        return UINT64_MAX;
+    }
+    switch (addr) {
+    case A_IR ... A_IR + 0xff:
+        return icu->ir[reg] & R_IR_IR_MASK;
+    case A_DTCER ... A_DTCER + 0xff:
+        return icu->dtcer[reg] & R_DTCER_DTCE_MASK;
+    case A_IER ... A_IER + 0x1f:
+        return icu->ier[reg];
+    case A_SWINTR:
+        return 0;
+    case A_FIR:
+        return icu->fir & (R_FIR_FIEN_MASK | R_FIR_FVCT_MASK);
+    case A_IPR ... A_IPR + 0x8f:
+        return icu->ipr[reg] & R_IPR_IPR_MASK;
+    case A_DMRSR:
+    case A_DMRSR + 4:
+    case A_DMRSR + 8:
+    case A_DMRSR + 12:
+        return icu->dmasr[reg >> 2];
+    case A_IRQCR ... A_IRQCR + 0x1f:
+        return icu->src[64 + reg].sense << R_IRQCR_IRQMD_SHIFT;
+    case A_NMISR:
+    case A_NMICLR:
+        return 0;
+    case A_NMIER:
+        return icu->nmier;
+    case A_NMICR:
+        return icu->nmicr;
+    default:
+        qemu_log_mask(LOG_UNIMP, "rx_icu: Register 0x%" HWADDR_PRIX
+                      " not implemented.\n", addr);
+        break;
+    }
+    return UINT64_MAX;
+}
+
+static void icu_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
+{
+    RXICUState *icu = opaque;
+    int reg = addr & 0xff;
+
+    if ((addr != A_FIR && size != 1) ||
+        (addr == A_FIR && size != 2)) {
+        qemu_log_mask(LOG_GUEST_ERROR, "rx_icu: Invalid write size at 0x%"
+                      HWADDR_PRIX "\n", addr);
+        return;
+    }
+    switch (addr) {
+    case A_IR ... A_IR + 0xff:
+        if (icu->src[reg].sense != TRG_LEVEL && val == 0) {
+            icu->ir[reg] = 0;
+        }
+        break;
+    case A_DTCER ... A_DTCER + 0xff:
+        icu->dtcer[reg] = val & R_DTCER_DTCE_MASK;
+        qemu_log_mask(LOG_UNIMP,
+                      "rx_icu: DTC not implemented\n");
+        break;
+    case A_IER ... A_IER + 0x1f:
+        icu->ier[reg] = val;
+        break;
+    case A_SWINTR:
+        if (val & R_SWINTR_SWINT_MASK) {
+            qemu_irq_pulse(icu->_swi);
+        }
+        break;
+    case A_FIR:
+        icu->fir = val & (R_FIR_FIEN_MASK | R_FIR_FVCT_MASK);
+        break;
+    case A_IPR ... A_IPR + 0x8f:
+        icu->ipr[reg] = val & R_IPR_IPR_MASK;
+        break;
+    case A_DMRSR:
+    case A_DMRSR + 4:
+    case A_DMRSR + 8:
+    case A_DMRSR + 12:
+        icu->dmasr[reg >> 2] = val;
+        qemu_log_mask(LOG_UNIMP,
+                      "rx_icu: DMAC not implemented\n");
+        break;
+    case A_IRQCR ... A_IRQCR + 0x1f:
+        icu->src[64 + reg].sense = val >> R_IRQCR_IRQMD_SHIFT;
+        break;
+    case A_NMICLR:
+        break;
+    case A_NMIER:
+        icu->nmier |= val & (R_NMIER_NMIEN_MASK |
+                             R_NMIER_LVDEN_MASK |
+                             R_NMIER_OSTEN_MASK);
+            break;
+    case A_NMICR:
+        if ((icu->nmier & R_NMIER_NMIEN_MASK) == 0) {
+            icu->nmicr = val & R_NMICR_NMIMD_MASK;
+        }
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP, "rx_icu: Register 0x%" HWADDR_PRIX
+                      " not implemented\n", addr);
+        break;
+    }
+}
+
+static const MemoryRegionOps icu_ops = {
+    .write = icu_write,
+    .read  = icu_read,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl = {
+        .max_access_size = 2,
+    },
+};
+
+static void rxicu_realize(DeviceState *dev, Error **errp)
+{
+    RXICUState *icu = RXICU(dev);
+    int i, j;
+
+    if (icu->init_sense == NULL) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "rx_icu: trigger-level property must be set.");
+        return;
+    }
+    for (i = j = 0; i < NR_IRQS; i++) {
+        if (icu->init_sense[j] == i) {
+            icu->src[i].sense = TRG_LEVEL;
+            if (j < icu->nr_sense) {
+                j++;
+            }
+        } else {
+            icu->src[i].sense = TRG_PEDGE;
+        }
+    }
+    icu->req_irq = -1;
+}
+
+static void rxicu_init(Object *obj)
+{
+    SysBusDevice *d = SYS_BUS_DEVICE(obj);
+    RXICUState *icu = RXICU(obj);
+
+    memory_region_init_io(&icu->memory, OBJECT(icu), &icu_ops,
+                          icu, "rx-icu", 0x600);
+    sysbus_init_mmio(d, &icu->memory);
+
+    qdev_init_gpio_in(DEVICE(d), rxicu_set_irq, NR_IRQS);
+    qdev_init_gpio_in_named(DEVICE(d), rxicu_ack_irq, "ack", 1);
+    sysbus_init_irq(d, &icu->_irq);
+    sysbus_init_irq(d, &icu->_fir);
+    sysbus_init_irq(d, &icu->_swi);
+}
+
+static void rxicu_fini(Object *obj)
+{
+    RXICUState *icu = RXICU(obj);
+    g_free(icu->map);
+    g_free(icu->init_sense);
+}
+
+static const VMStateDescription vmstate_rxicu = {
+    .name = "rx-icu",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static Property rxicu_properties[] = {
+    DEFINE_PROP_ARRAY("ipr-map", RXICUState, nr_irqs, map,
+                      qdev_prop_uint32, uint32_t),
+    DEFINE_PROP_ARRAY("trigger-level", RXICUState, nr_sense, init_sense,
+                      qdev_prop_uint32, uint32_t),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void rxicu_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = rxicu_realize;
+    dc->props = rxicu_properties;
+    dc->vmsd = &vmstate_rxicu;
+}
+
+static const TypeInfo rxicu_info = {
+    .name       = TYPE_RXICU,
+    .parent     = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(RXICUState),
+    .instance_init = rxicu_init,
+    .instance_finalize = rxicu_fini,
+    .class_init = rxicu_class_init,
+};
+
+static void rxicu_register_types(void)
+{
+    type_register_static(&rxicu_info);
+}
+
+type_init(rxicu_register_types)
diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
index 5347f8412c..67e9d97464 100644
--- a/hw/intc/Kconfig
+++ b/hw/intc/Kconfig
@@ -58,3 +58,6 @@ config S390_FLIC_KVM
 
 config OMPIC
     bool
+
+config RX_ICU
+    bool
diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
index 03019b9a03..16bdc7e427 100644
--- a/hw/intc/Makefile.objs
+++ b/hw/intc/Makefile.objs
@@ -49,3 +49,4 @@ obj-$(CONFIG_ARM_GIC) += arm_gicv3_cpuif.o
 obj-$(CONFIG_MIPS_CPS) += mips_gic.o
 obj-$(CONFIG_NIOS2) += nios2_iic.o
 obj-$(CONFIG_OMPIC) += ompic.o
+obj-$(CONFIG_RX) += rx_icu.o
-- 
2.11.0



  parent reply index

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-17  7:36 [Qemu-devel] [PATCH v23 00/22] Add RX archtecture support Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 01/22] MAINTAINERS: Add RX Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 02/22] qemu/bitops.h: Add extract8 and extract16 Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 03/22] hw/registerfields.h: Add 8bit and 16bit register macros Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 04/22] target/rx: TCG translation Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 05/22] target/rx: TCG helper Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 06/22] target/rx: CPU definition Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 07/22] target/rx: RX disassembler Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 08/22] target/rx: Disassemble rx_index_addr into a string Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 09/22] target/rx: Replace operand with prt_ldmi in disassembler Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 10/22] target/rx: Use prt_ldmi for XCHG_mr disassembly Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 11/22] target/rx: Emit all disassembly in one prt() Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 12/22] target/rx: Collect all bytes during disassembly Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 13/22] target/rx: Dump bytes for each insn " Yoshinori Sato
2019-08-17  7:36 ` Yoshinori Sato [this message]
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 15/22] hw/timer: RX62N internal timer modules Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 16/22] hw/char: RX62N serial communication interface (SCI) Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 17/22] hw/rx: RX Target hardware definition Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 18/22] hw/rx: Honor -accel qtest Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 19/22] hw/rx: Restrict the RX62N microcontroller to the RX62N CPU core Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 20/22] Add rx-softmmu Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 21/22] BootLinuxConsoleTest: Test the RX-Virt machine Yoshinori Sato
2019-08-17  7:36 ` [Qemu-devel] [PATCH v23 22/22] target/rx: remove unused functions Yoshinori Sato
2019-08-21 10:23   ` Philippe Mathieu-Daudé
2019-08-21 14:33     ` Yoshinori Sato
2019-08-17  8:07 ` [Qemu-devel] [PATCH v23 00/22] Add RX archtecture support no-reply
2019-08-17  8:22 ` no-reply
2019-08-17  8:37 ` no-reply
2019-08-17  8:53 ` no-reply
2019-08-17  9:09 ` no-reply
2019-08-17  9:23 ` no-reply
2019-08-17  9:39 ` no-reply
2019-08-17  9:48 ` no-reply
2019-08-21  9:28 ` Yoshinori Sato
2019-08-21 10:28 ` Philippe Mathieu-Daudé
2019-09-02 15:02   ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190817073628.94473-15-ysato@users.sourceforge.jp \
    --to=ysato@users.sourceforge.jp \
    --cc=imammedo@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git