QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: "Daniel P. Berrangé" <berrange@redhat.com>
To: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>, Fam Zheng <fam@euphon.net>,
	qemu-block@nongnu.org, Markus Armbruster <armbru@redhat.com>,
	qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>
Subject: Re: [Qemu-devel] [PATCH 10/13] block/crypto: implement the encryption key management
Date: Thu, 22 Aug 2019 12:29:46 +0100
Message-ID: <20190822112946.GP3267@redhat.com> (raw)
In-Reply-To: <20190814202219.1870-11-mlevitsk@redhat.com>

On Wed, Aug 14, 2019 at 11:22:16PM +0300, Maxim Levitsky wrote:
> This implements the encryption key management
> using the generic code in qcrypto layer
> 
> This code adds another 'write_func' because the initialization
> write_func works directly on the underlying file,
> because during the creation, there is no open instance
> of the luks driver, but during regular use, we have it,
> and should use it instead.
> 
> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
> ---
>  block/crypto.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 93 insertions(+), 3 deletions(-)
> 
> diff --git a/block/crypto.c b/block/crypto.c
> index 42a3f0898b..415b6db041 100644
> --- a/block/crypto.c
> +++ b/block/crypto.c
> @@ -36,6 +36,7 @@ typedef struct BlockCrypto BlockCrypto;
>  
>  struct BlockCrypto {
>      QCryptoBlock *block;
> +    bool updating_keys;
>  };
>  
>  
> @@ -69,6 +70,24 @@ static ssize_t block_crypto_read_func(QCryptoBlock *block,
>      return ret;
>  }
>  
> +static ssize_t block_crypto_write_func(QCryptoBlock *block,
> +                                      size_t offset,
> +                                      const uint8_t *buf,
> +                                      size_t buflen,
> +                                      void *opaque,
> +                                      Error **errp)
> +{
> +    BlockDriverState *bs = opaque;
> +    ssize_t ret;
> +
> +    ret = bdrv_pwrite(bs->file, offset, buf, buflen);
> +    if (ret < 0) {
> +        error_setg_errno(errp, -ret, "Could not write encryption header");
> +        return ret;
> +    }
> +    return ret;
> +}
> +
>  
>  struct BlockCryptoCreateData {
>      BlockBackend *blk;
> @@ -622,6 +641,78 @@ block_crypto_get_specific_info_luks(BlockDriverState *bs, Error **errp)
>      return spec_info;
>  }
>  
> +
> +static int
> +block_crypto_setup_encryption(BlockDriverState *bs,
> +                              enum BlkSetupEncryptionAction action,
> +                              QCryptoEncryptionSetupOptions *options,
> +                              bool force,
> +                              Error **errp)
> +{
> +    BlockCrypto *crypto = bs->opaque;
> +    int ret;
> +
> +    assert(crypto);
> +    assert(crypto->block);
> +
> +    crypto->updating_keys = true;
> +
> +    ret = bdrv_child_refresh_perms(bs, bs->file, errp);
> +
> +    if (ret) {
> +        crypto->updating_keys = false;
> +        return ret;
> +    }
> +
> +    ret = qcrypto_block_setup_encryption(crypto->block,
> +                                          block_crypto_read_func,
> +                                          block_crypto_write_func,
> +                                          bs,
> +                                          action,
> +                                          options,
> +                                          force,
> +                                          errp);
> +
> +    crypto->updating_keys = false;
> +    bdrv_child_refresh_perms(bs, bs->file, errp);
> +
> +
> +    return ret;
> +
> +}
> +
> +
> +static void
> +block_crypto_child_perms(BlockDriverState *bs, BdrvChild *c,
> +                         const BdrvChildRole *role,
> +                         BlockReopenQueue *reopen_queue,
> +                         uint64_t perm, uint64_t shared,
> +                         uint64_t *nperm, uint64_t *nshared)
> +{
> +
> +    BlockCrypto *crypto = bs->opaque;
> +
> +    /*
> +     * This driver doesn't modify LUKS metadata except
> +     * when updating the encryption slots.
> +     * Allow share-rw=on as a special case.
> +     *
> +     * Encryption update will set the crypto->updating_keys
> +     * during that period and refresh permissions
> +     *
> +     * */
> +
> +    if (crypto->updating_keys) {
> +        /*need exclusive write access for header update  */
> +        perm |= BLK_PERM_WRITE;
> +        shared &= ~BLK_PERM_WRITE;
> +    }

So if 2 QEMU's have the same LUKS image open, this means that
if one tries to update the header, it will fail to upgrade
its lock & thus be blocked from updating header ?

> +
> +    bdrv_filter_default_perms(bs, c, role, reopen_queue,
> +            perm, shared, nperm, nshared);
> +}

Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|


  reply index

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-14 20:22 [Qemu-devel] [PATCH 00/13] RFC: luks/encrypted qcow2 " Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 01/13] block-crypto: misc refactoring Maxim Levitsky
2019-08-20 16:38   ` Max Reitz
2019-08-22  0:05     ` Maxim Levitsky
2019-08-22 14:34       ` Max Reitz
2019-08-22 15:04         ` Maxim Levitsky
2019-08-21 15:39   ` Daniel P. Berrangé
2019-08-22  0:08     ` Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 02/13] qcrypto-luks: " Maxim Levitsky
2019-08-15 21:40   ` [Qemu-devel] [Qemu-block] " John Snow
2019-08-19 14:21     ` Maxim Levitsky
2019-08-22 10:29     ` Daniel P. Berrangé
2019-08-22 11:04       ` Maxim Levitsky
2019-08-22 11:10         ` Daniel P. Berrangé
2019-08-22 11:13           ` Maxim Levitsky
2019-08-20 17:36   ` [Qemu-devel] " Max Reitz
2019-08-21 23:59     ` Maxim Levitsky
2019-08-22 14:32       ` Max Reitz
2019-08-25 10:46         ` Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 03/13] qcrypto-luks: refactoring: extract load/store/check/parse header functions Maxim Levitsky
2019-08-20 18:01   ` Max Reitz
2019-08-21 22:43     ` Maxim Levitsky
2019-08-22 10:32       ` Daniel P. Berrangé
2019-08-22 10:57         ` Maxim Levitsky
2019-08-22 10:34       ` Daniel P. Berrangé
2019-08-25 14:11         ` Maxim Levitsky
2019-08-22 10:38   ` Daniel P. Berrangé
2019-08-25 14:09     ` Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 04/13] qcrypto-luks: refactoring: simplify the math used for keyslot locations Maxim Levitsky
2019-08-22 10:47   ` Daniel P. Berrangé
2019-08-25 14:30     ` Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 05/13] qcrypto-luks: clear the masterkey and password before freeing them always Maxim Levitsky
2019-08-20 18:12   ` Max Reitz
2019-08-21 22:40     ` Maxim Levitsky
2019-08-22 10:49     ` Daniel P. Berrangé
2019-08-22 10:56       ` Maxim Levitsky
2019-08-25 15:31         ` Maxim Levitsky
2019-08-25 17:15           ` Maxim Levitsky
2019-08-27  8:55           ` Daniel P. Berrangé
2019-08-21 23:01   ` [Qemu-devel] [Qemu-block] " Nir Soffer
2019-08-21 23:11     ` Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 06/13] qcrypto-luks: implement more rigorous header checking Maxim Levitsky
2019-08-22 11:04   ` Daniel P. Berrangé
2019-08-25 15:40     ` Maxim Levitsky
2019-08-25 16:08       ` Maxim Levitsky
2019-08-26 13:31         ` Eric Blake
2019-08-26 13:39           ` Maxim Levitsky
2019-08-27  8:56         ` Daniel P. Berrangé
2019-08-14 20:22 ` [Qemu-devel] [PATCH 07/13] block: add manage-encryption command (qmp and blockdev) Maxim Levitsky
2019-08-20 18:27   ` Max Reitz
2019-08-21 22:32     ` Maxim Levitsky
2019-08-22 11:14     ` Daniel P. Berrangé
2019-08-21 11:47   ` Markus Armbruster
2019-08-21 22:24     ` Maxim Levitsky
2019-08-22 14:07       ` Markus Armbruster
2019-08-25 16:42         ` Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 08/13] qcrypto: add the plumbing for encryption management Maxim Levitsky
2019-08-22 11:16   ` Daniel P. Berrangé
2019-08-22 11:47     ` Maxim Levitsky
2019-08-22 11:49       ` Daniel P. Berrangé
2019-08-14 20:22 ` [Qemu-devel] [PATCH 09/13] qcrypto-luks: implement the encryption key management Maxim Levitsky
2019-08-22 11:27   ` Daniel P. Berrangé
2019-08-25 17:01     ` Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 10/13] block/crypto: " Maxim Levitsky
2019-08-22 11:29   ` Daniel P. Berrangé [this message]
2019-08-22 11:36     ` Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 11/13] block/qcow2: implement the encryption key managment Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 12/13] qemu-img: implement key management Maxim Levitsky
2019-08-20 18:29   ` Max Reitz
2019-08-21 22:33     ` Maxim Levitsky
2019-08-22 11:32     ` Daniel P. Berrangé
2019-08-22 14:42       ` Max Reitz
2019-08-25 17:04         ` Maxim Levitsky
2019-08-14 20:22 ` [Qemu-devel] [PATCH 13/13] iotests : add tests for encryption " Maxim Levitsky
2019-08-14 21:08 ` [Qemu-devel] [PATCH 00/13] RFC: luks/encrypted qcow2 " Eric Blake
2019-08-15  8:49   ` Maxim Levitsky
2019-08-15  9:10   ` Kevin Wolf
2019-08-15 14:18     ` Markus Armbruster
2019-08-15 14:44       ` Maxim Levitsky
2019-08-15 15:00         ` Eric Blake
2019-08-19 12:35           ` Maxim Levitsky
2019-08-21 11:31             ` Markus Armbruster
2019-08-21 13:22               ` Maxim Levitsky
2019-08-20 17:59 ` Max Reitz
2019-08-21 22:00   ` Maxim Levitsky
2019-08-22 11:35 ` Daniel P. Berrangé
2019-08-25 17:10   ` Maxim Levitsky

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190822112946.GP3267@redhat.com \
    --to=berrange@redhat.com \
    --cc=armbru@redhat.com \
    --cc=fam@euphon.net \
    --cc=kwolf@redhat.com \
    --cc=mlevitsk@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org qemu-devel@archiver.kernel.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox