QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, david@redhat.com
Subject: [Qemu-devel] [PATCH 3/6] cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
Date: Sat, 24 Aug 2019 14:34:48 -0700
Message-ID: <20190824213451.31118-4-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190824213451.31118-1-richard.henderson@linaro.org>

We had two different mechanisms to force a recheck of the tlb.

Before TLB_RECHECK was introduced, we had a PAGE_WRITE_INV bit
that would immediate set TLB_INVALID_MASK, which automatically
means that a second check of the tlb entry fails.

We can use the same mechanism to handle small pages.
Conserve TLB_* bits by removing TLB_RECHECK.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 include/exec/cpu-all.h |  5 +--
 accel/tcg/cputlb.c     | 86 +++++++++++-------------------------------
 2 files changed, 24 insertions(+), 67 deletions(-)

diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index 8323094648..8d07ae23a5 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -329,14 +329,11 @@ CPUArchState *cpu_copy(CPUArchState *env);
 #define TLB_NOTDIRTY        (1 << (TARGET_PAGE_BITS - 2))
 /* Set if TLB entry is an IO callback.  */
 #define TLB_MMIO            (1 << (TARGET_PAGE_BITS - 3))
-/* Set if TLB entry must have MMU lookup repeated for every access */
-#define TLB_RECHECK         (1 << (TARGET_PAGE_BITS - 4))
 
 /* Use this mask to check interception with an alignment mask
  * in a TCG backend.
  */
-#define TLB_FLAGS_MASK  (TLB_INVALID_MASK | TLB_NOTDIRTY | TLB_MMIO \
-                         | TLB_RECHECK)
+#define TLB_FLAGS_MASK  (TLB_INVALID_MASK | TLB_NOTDIRTY | TLB_MMIO)
 
 /**
  * tlb_hit_page: return true if page aligned @addr is a hit against the
diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index d9787cc893..c9576bebcf 100644
--- a/accel/tcg/cputlb.c
+++ b/accel/tcg/cputlb.c
@@ -732,11 +732,8 @@ void tlb_set_page_with_attrs(CPUState *cpu, target_ulong vaddr,
 
     address = vaddr_page;
     if (size < TARGET_PAGE_SIZE) {
-        /*
-         * Slow-path the TLB entries; we will repeat the MMU check and TLB
-         * fill on every access.
-         */
-        address |= TLB_RECHECK;
+        /* Repeat the MMU check and TLB fill on every access.  */
+        address |= TLB_INVALID_MASK;
     }
     if (attrs.byte_swap) {
         /* Force the access through the I/O slow path.  */
@@ -1026,10 +1023,15 @@ static bool victim_tlb_hit(CPUArchState *env, size_t mmu_idx, size_t index,
   victim_tlb_hit(env, mmu_idx, index, offsetof(CPUTLBEntry, TY), \
                  (ADDR) & TARGET_PAGE_MASK)
 
-/* NOTE: this function can trigger an exception */
-/* NOTE2: the returned address is not exactly the physical address: it
- * is actually a ram_addr_t (in system mode; the user mode emulation
- * version of this function returns a guest virtual address).
+/*
+ * Return a ram_addr_t for the virtual address for execution.
+ *
+ * Return -1 if we can't translate and execute from an entire page
+ * of RAM.  This will force us to execute by loading and translating
+ * one insn at a time, without caching.
+ *
+ * NOTE: This function will trigger an exception if the page is
+ * not executable.
  */
 tb_page_addr_t get_page_addr_code(CPUArchState *env, target_ulong addr)
 {
@@ -1043,19 +1045,20 @@ tb_page_addr_t get_page_addr_code(CPUArchState *env, target_ulong addr)
             tlb_fill(env_cpu(env), addr, 0, MMU_INST_FETCH, mmu_idx, 0);
             index = tlb_index(env, mmu_idx, addr);
             entry = tlb_entry(env, mmu_idx, addr);
+
+            if (unlikely(entry->addr_code & TLB_INVALID_MASK)) {
+                /*
+                 * The MMU protection covers a smaller range than a target
+                 * page, so we must redo the MMU check for every insn.
+                 */
+                return -1;
+            }
         }
         assert(tlb_hit(entry->addr_code, addr));
     }
 
-    if (unlikely(entry->addr_code & (TLB_RECHECK | TLB_MMIO))) {
-        /*
-         * Return -1 if we can't translate and execute from an entire
-         * page of RAM here, which will cause us to execute by loading
-         * and translating one insn at a time, without caching:
-         *  - TLB_RECHECK: means the MMU protection covers a smaller range
-         *    than a target page, so we must redo the MMU check every insn
-         *  - TLB_MMIO: region is not backed by RAM
-         */
+    if (unlikely(entry->addr_code & TLB_MMIO)) {
+        /* The region is not backed by RAM.  */
         return -1;
     }
 
@@ -1180,7 +1183,7 @@ static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
     }
 
     /* Notice an IO access or a needs-MMU-lookup access */
-    if (unlikely(tlb_addr & (TLB_MMIO | TLB_RECHECK))) {
+    if (unlikely(tlb_addr & TLB_MMIO)) {
         /* There's really nothing that can be done to
            support this apart from stop-the-world.  */
         goto stop_the_world;
@@ -1258,6 +1261,7 @@ load_helper(CPUArchState *env, target_ulong addr, TCGMemOpIdx oi,
             entry = tlb_entry(env, mmu_idx, addr);
         }
         tlb_addr = code_read ? entry->addr_code : entry->addr_read;
+        tlb_addr &= ~TLB_INVALID_MASK;
     }
 
     /* Handle an IO access.  */
@@ -1265,27 +1269,6 @@ load_helper(CPUArchState *env, target_ulong addr, TCGMemOpIdx oi,
         if ((addr & (size - 1)) != 0) {
             goto do_unaligned_access;
         }
-
-        if (tlb_addr & TLB_RECHECK) {
-            /*
-             * This is a TLB_RECHECK access, where the MMU protection
-             * covers a smaller range than a target page, and we must
-             * repeat the MMU check here. This tlb_fill() call might
-             * longjump out if this access should cause a guest exception.
-             */
-            tlb_fill(env_cpu(env), addr, size,
-                     access_type, mmu_idx, retaddr);
-            index = tlb_index(env, mmu_idx, addr);
-            entry = tlb_entry(env, mmu_idx, addr);
-
-            tlb_addr = code_read ? entry->addr_code : entry->addr_read;
-            tlb_addr &= ~TLB_RECHECK;
-            if (!(tlb_addr & ~TARGET_PAGE_MASK)) {
-                /* RAM access */
-                goto do_aligned_access;
-            }
-        }
-
         return io_readx(env, &env_tlb(env)->d[mmu_idx].iotlb[index],
                         mmu_idx, addr, retaddr, access_type, op);
     }
@@ -1314,7 +1297,6 @@ load_helper(CPUArchState *env, target_ulong addr, TCGMemOpIdx oi,
         return res & MAKE_64BIT_MASK(0, size * 8);
     }
 
- do_aligned_access:
     haddr = (void *)((uintptr_t)addr + entry->addend);
     switch (op) {
     case MO_UB:
@@ -1509,27 +1491,6 @@ store_helper(CPUArchState *env, target_ulong addr, uint64_t val,
         if ((addr & (size - 1)) != 0) {
             goto do_unaligned_access;
         }
-
-        if (tlb_addr & TLB_RECHECK) {
-            /*
-             * This is a TLB_RECHECK access, where the MMU protection
-             * covers a smaller range than a target page, and we must
-             * repeat the MMU check here. This tlb_fill() call might
-             * longjump out if this access should cause a guest exception.
-             */
-            tlb_fill(env_cpu(env), addr, size, MMU_DATA_STORE,
-                     mmu_idx, retaddr);
-            index = tlb_index(env, mmu_idx, addr);
-            entry = tlb_entry(env, mmu_idx, addr);
-
-            tlb_addr = tlb_addr_write(entry);
-            tlb_addr &= ~TLB_RECHECK;
-            if (!(tlb_addr & ~TARGET_PAGE_MASK)) {
-                /* RAM access */
-                goto do_aligned_access;
-            }
-        }
-
         io_writex(env, &env_tlb(env)->d[mmu_idx].iotlb[index], mmu_idx,
                   val, addr, retaddr, op);
         return;
@@ -1579,7 +1540,6 @@ store_helper(CPUArchState *env, target_ulong addr, uint64_t val,
         return;
     }
 
- do_aligned_access:
     haddr = (void *)((uintptr_t)addr + entry->addend);
     switch (op) {
     case MO_UB:
-- 
2.17.1



  parent reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-24 21:34 [Qemu-devel] [PATCH 0/6] exec: Cleanup watchpoints Richard Henderson
2019-08-24 21:34 ` [Qemu-devel] [PATCH 1/6] exec: Move user-only watchpoint stubs inline Richard Henderson
2019-08-26  7:45   ` David Hildenbrand
2019-08-24 21:34 ` [Qemu-devel] [PATCH 2/6] exec: Factor out core logic of check_watchpoint() Richard Henderson
2019-08-24 21:34 ` Richard Henderson [this message]
2019-08-26  8:36   ` [Qemu-devel] [PATCH 3/6] cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK David Hildenbrand
2019-08-24 21:34 ` [Qemu-devel] [PATCH 4/6] exec: Factor out cpu_watchpoint_address_matches Richard Henderson
2019-08-26  8:41   ` David Hildenbrand
2019-08-28 21:28     ` Richard Henderson
2019-08-28 21:54       ` David Hildenbrand
2019-08-24 21:34 ` [Qemu-devel] [PATCH 5/6] cputlb: Handle watchpoints via TLB_WATCHPOINT Richard Henderson
2019-08-28 22:00   ` David Hildenbrand
2019-08-24 21:34 ` [Qemu-devel] [PATCH 6/6] tcg: Check for watchpoints in probe_write() Richard Henderson
2019-08-28 21:47 ` [Qemu-devel] [PATCH 0/6] exec: Cleanup watchpoints Richard Henderson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190824213451.31118-4-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=david@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org qemu-devel@archiver.kernel.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox