qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Lieven <pl@kamp.de>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, codyprime@gmail.com, Peter Lieven <pl@kamp.de>,
	qemu-devel@nongnu.org, mreitz@redhat.com, jhf@kamp.de
Subject: [Qemu-devel] [PATCH V4] block/vhdx: add check for truncated image files
Date: Tue, 10 Sep 2019 17:26:22 +0200	[thread overview]
Message-ID: <20190910152622.5432-1-pl@kamp.de> (raw)

qemu is currently not able to detect truncated vhdx image files.
Add a basic check if all allocated blocks are reachable at open and
report all errors during bdrv_co_check.

Signed-off-by: Peter Lieven <pl@kamp.de>
---
V4: - allow partial last blocks [Kevin]
    - report offsets in error messages [Kevin]
    - check for start and end offset after eof

V3: - check for bdrv_getlength failure [Kevin]
    - use uint32_t for i [Kevin]
    - check for BAT entry overflow [Kevin]
    - break on !errcnt in second check

V2: - add error reporting [Kevin]
    - use bdrv_getlength instead of bdrv_get_allocated_file_size [Kevin]
    - factor out BAT entry check and add error reporting for region
      overlaps
    - already check on vhdx_open

 block/vhdx.c | 120 +++++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 103 insertions(+), 17 deletions(-)

diff --git a/block/vhdx.c b/block/vhdx.c
index 6a09d0a55c..371f226286 100644
--- a/block/vhdx.c
+++ b/block/vhdx.c
@@ -24,6 +24,7 @@
 #include "qemu/option.h"
 #include "qemu/crc32c.h"
 #include "qemu/bswap.h"
+#include "qemu/error-report.h"
 #include "vhdx.h"
 #include "migration/blocker.h"
 #include "qemu/uuid.h"
@@ -235,6 +236,9 @@ static int vhdx_region_check(BDRVVHDXState *s, uint64_t start, uint64_t length)
     end = start + length;
     QLIST_FOREACH(r, &s->regions, entries) {
         if (!((start >= r->end) || (end <= r->start))) {
+            error_report("VHDX region %" PRIu64 "-%" PRIu64 " overlaps with "
+                         "region %" PRIu64 "-%." PRIu64, start, end, r->start,
+                         r->end);
             ret = -EINVAL;
             goto exit;
         }
@@ -877,6 +881,95 @@ static void vhdx_calc_bat_entries(BDRVVHDXState *s)
 
 }
 
+static int vhdx_check_bat_entries(BlockDriverState *bs, int *errcnt)
+{
+    BDRVVHDXState *s = bs->opaque;
+    int64_t image_file_size = bdrv_getlength(bs->file->bs);
+    uint64_t payblocks = s->chunk_ratio;
+    uint64_t i;
+    int ret = 0;
+
+    if (image_file_size < 0) {
+        error_report("Could not determinate VHDX image file size.");
+        return image_file_size;
+    }
+
+    for (i = 0; i < s->bat_entries; i++) {
+        if ((s->bat[i] & VHDX_BAT_STATE_BIT_MASK) ==
+            PAYLOAD_BLOCK_FULLY_PRESENT) {
+            uint64_t offset = s->bat[i] & VHDX_BAT_FILE_OFF_MASK;
+            /*
+             * Allow that the last block exists only partially. The VHDX spec
+             * states that the image file can only grow in blocksize increments,
+             * but QEMU created images with partial last blocks in the past.
+             */
+            uint32_t block_length = MIN(s->block_size,
+                bs->total_sectors * BDRV_SECTOR_SIZE - i * s->block_size);
+            /*
+             * Check for BAT entry overflow.
+             */
+            if (offset > INT64_MAX - s->block_size) {
+                error_report("VHDX BAT entry %" PRIu64 " offset overflow.", i);
+                ret = -EINVAL;
+                if (!errcnt) {
+                    break;
+                }
+                (*errcnt)++;
+            }
+            /*
+             * Check if fully allocated BAT entries do not reside after
+             * end of the image file.
+             */
+            if (offset >= image_file_size) {
+                error_report("VHDX BAT entry %" PRIu64 " start offset %" PRIu64
+                             " points after end of file (%" PRIi64 "). Image"
+                             " has probably been truncated.",
+                             i, offset, image_file_size);
+                ret = -EINVAL;
+                if (!errcnt) {
+                    break;
+                }
+                (*errcnt)++;
+            } else if (offset + block_length > image_file_size) {
+                error_report("VHDX BAT entry %" PRIu64 " end offset %" PRIu64
+                             " points after end of file (%" PRIi64 "). Image"
+                             " has probably been truncated.",
+                             i, offset + block_length - 1, image_file_size);
+                ret = -EINVAL;
+                if (!errcnt) {
+                    break;
+                }
+                (*errcnt)++;
+            }
+
+            /*
+             * verify populated BAT field file offsets against
+             * region table and log entries
+             */
+            if (payblocks--) {
+                /* payload bat entries */
+                int ret2;
+                ret2 = vhdx_region_check(s, offset, s->block_size);
+                if (ret2 < 0) {
+                    ret = -EINVAL;
+                    if (!errcnt) {
+                        break;
+                    }
+                    (*errcnt)++;
+                }
+            } else {
+                payblocks = s->chunk_ratio;
+                /*
+                 * Once differencing files are supported, verify sector bitmap
+                 * blocks here
+                 */
+            }
+        }
+    }
+
+    return ret;
+}
+
 static void vhdx_close(BlockDriverState *bs)
 {
     BDRVVHDXState *s = bs->opaque;
@@ -981,25 +1074,15 @@ static int vhdx_open(BlockDriverState *bs, QDict *options, int flags,
         goto fail;
     }
 
-    uint64_t payblocks = s->chunk_ratio;
-    /* endian convert, and verify populated BAT field file offsets against
-     * region table and log entries */
+    /* endian convert populated BAT field entires */
     for (i = 0; i < s->bat_entries; i++) {
         s->bat[i] = le64_to_cpu(s->bat[i]);
-        if (payblocks--) {
-            /* payload bat entries */
-            if ((s->bat[i] & VHDX_BAT_STATE_BIT_MASK) ==
-                    PAYLOAD_BLOCK_FULLY_PRESENT) {
-                ret = vhdx_region_check(s, s->bat[i] & VHDX_BAT_FILE_OFF_MASK,
-                                        s->block_size);
-                if (ret < 0) {
-                    goto fail;
-                }
-            }
-        } else {
-            payblocks = s->chunk_ratio;
-            /* Once differencing files are supported, verify sector bitmap
-             * blocks here */
+    }
+
+    if (!(flags & BDRV_O_CHECK)) {
+        ret = vhdx_check_bat_entries(bs, NULL);
+        if (ret < 0) {
+            goto fail;
         }
     }
 
@@ -2072,6 +2155,9 @@ static int coroutine_fn vhdx_co_check(BlockDriverState *bs,
     if (s->log_replayed_on_open) {
         result->corruptions_fixed++;
     }
+
+    vhdx_check_bat_entries(bs, &result->corruptions);
+
     return 0;
 }
 
-- 
2.17.1




             reply	other threads:[~2019-09-10 15:27 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-10 15:26 Peter Lieven [this message]
2019-10-10 16:15 ` [PATCH V4] block/vhdx: add check for truncated image files Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190910152622.5432-1-pl@kamp.de \
    --to=pl@kamp.de \
    --cc=codyprime@gmail.com \
    --cc=jhf@kamp.de \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).