qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Laurent Vivier" <lvivier@redhat.com>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Thomas Huth" <thuth@redhat.com>, "Sergio Lopez" <slp@redhat.com>,
	"Stefan Hajnoczi" <stefanha@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [PULL 23/25] libqos: extract Legacy virtio-pci.c code
Date: Sat, 26 Oct 2019 17:53:10 -0400	[thread overview]
Message-ID: <20191026193824.11926-24-mst@redhat.com> (raw)
In-Reply-To: <20191026193824.11926-1-mst@redhat.com>

From: Stefan Hajnoczi <stefanha@redhat.com>

The current libqos virtio-pci.c code implements the VIRTIO Legacy
interface.  Extract existing code in preparation for VIRTIO 1.0 support.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191023100425.12168-16-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/libqos/virtio-pci.c | 29 ++++++++++++-----------------
 tests/libqos/virtio-pci.h |  2 --
 2 files changed, 12 insertions(+), 19 deletions(-)

diff --git a/tests/libqos/virtio-pci.c b/tests/libqos/virtio-pci.c
index e9595603f5..11866f7772 100644
--- a/tests/libqos/virtio-pci.c
+++ b/tests/libqos/virtio-pci.c
@@ -35,14 +35,6 @@
  * original qvirtio_pci_destructor and qvirtio_pci_start_hw.
  */
 
-static inline bool qvirtio_pci_is_big_endian(QVirtioPCIDevice *dev)
-{
-    QPCIBus *bus = dev->pdev->bus;
-
-    /* FIXME: virtio 1.0 is always little-endian */
-    return qtest_big_endian(bus->qts);
-}
-
 #define CONFIG_BASE(dev) (VIRTIO_PCI_CONFIG_OFF((dev)->pdev->msix_enabled))
 
 static uint8_t qvirtio_pci_config_readb(QVirtioDevice *d, uint64_t off)
@@ -55,8 +47,7 @@ static uint8_t qvirtio_pci_config_readb(QVirtioDevice *d, uint64_t off)
  * but virtio ( < 1.0) is in guest order
  * so with a big-endian guest the order has been reversed,
  * reverse it again
- * virtio-1.0 is always little-endian, like PCI, but this
- * case will be managed inside qvirtio_pci_is_big_endian()
+ * virtio-1.0 is always little-endian, like PCI
  */
 
 static uint16_t qvirtio_pci_config_readw(QVirtioDevice *d, uint64_t off)
@@ -262,7 +253,7 @@ static void qvirtio_pci_virtqueue_kick(QVirtioDevice *d, QVirtQueue *vq)
     qpci_io_writew(dev->pdev, dev->bar, VIRTIO_PCI_QUEUE_NOTIFY, vq->index);
 }
 
-const QVirtioBus qvirtio_pci = {
+static const QVirtioBus qvirtio_pci_legacy = {
     .config_readb = qvirtio_pci_config_readb,
     .config_readw = qvirtio_pci_config_readw,
     .config_readl = qvirtio_pci_config_readl,
@@ -396,17 +387,21 @@ void qvirtio_pci_start_hw(QOSGraphObject *obj)
     qvirtio_start_device(&dev->vdev);
 }
 
-static void qvirtio_pci_init_from_pcidev(QVirtioPCIDevice *dev, QPCIDevice *pci_dev)
+static void qvirtio_pci_init_legacy(QVirtioPCIDevice *dev)
 {
-    dev->pdev = pci_dev;
-    dev->vdev.device_type = qpci_config_readw(pci_dev, PCI_SUBSYSTEM_ID);
+    dev->vdev.device_type = qpci_config_readw(dev->pdev, PCI_SUBSYSTEM_ID);
     dev->bar_idx = 0;
+    dev->vdev.bus = &qvirtio_pci_legacy;
+    dev->msix_ops = &qvirtio_pci_msix_ops_legacy;
+    dev->vdev.big_endian = qtest_big_endian(dev->pdev->bus->qts);
+}
 
+static void qvirtio_pci_init_from_pcidev(QVirtioPCIDevice *dev, QPCIDevice *pci_dev)
+{
+    dev->pdev = pci_dev;
     dev->config_msix_entry = -1;
-    dev->msix_ops = &qvirtio_pci_msix_ops_legacy;
 
-    dev->vdev.bus = &qvirtio_pci;
-    dev->vdev.big_endian = qvirtio_pci_is_big_endian(dev);
+    qvirtio_pci_init_legacy(dev);
 
     /* each virtio-xxx-pci device should override at least this function */
     dev->obj.get_driver = NULL;
diff --git a/tests/libqos/virtio-pci.h b/tests/libqos/virtio-pci.h
index 78a1c15c2a..6b3a385b06 100644
--- a/tests/libqos/virtio-pci.h
+++ b/tests/libqos/virtio-pci.h
@@ -45,8 +45,6 @@ typedef struct QVirtQueuePCI {
     uint32_t msix_data;
 } QVirtQueuePCI;
 
-extern const QVirtioBus qvirtio_pci;
-
 void virtio_pci_init(QVirtioPCIDevice *dev, QPCIBus *bus, QPCIAddress * addr);
 QVirtioPCIDevice *virtio_pci_new(QPCIBus *bus, QPCIAddress * addr);
 
-- 
MST



  parent reply	other threads:[~2019-10-26 22:42 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-26 19:39 [PULL 00/25] virtio: features, tests Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 01/25] virtio: basic structure for packed ring Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 02/25] virtio: device/driver area size calculation refactor for split ring Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 03/25] virtio: Free blk virqueues at unrealize() Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 04/25] virtio: Free rnd virqueue " Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 05/25] virtio: basic packed virtqueue support Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 06/25] virtio: event suppression support for packed ring Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 07/25] vhost_net: enable packed ring support Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 08/25] virtio: add property to enable packed virtqueue Michael S. Tsirkin
2019-10-26 19:39 ` [PULL 09/25] tests/virtio-blk-test: read config space after feature negotiation Michael S. Tsirkin
2019-10-26 19:40 ` [PULL 10/25] libqos: read QVIRTIO_MMIO_VERSION register Michael S. Tsirkin
2019-10-26 19:40 ` [PULL 11/25] libqos: extend feature bits to 64-bit Michael S. Tsirkin
2019-10-26 21:52 ` [PULL 16/25] libqos: implement VIRTIO 1.0 FEATURES_OK step Michael S. Tsirkin
2019-10-26 21:52 ` [PULL 17/25] libqos: access VIRTIO 1.0 vring in little-endian Michael S. Tsirkin
2019-10-26 21:52 ` [PULL 18/25] libqos: add iteration support to qpci_find_capability() Michael S. Tsirkin
2019-10-26 21:52 ` [PULL 19/25] libqos: pass full QVirtQueue to set_queue_address() Michael S. Tsirkin
2019-10-26 21:52 ` [PULL 20/25] libqos: add MSI-X callbacks to QVirtioPCIDevice Michael S. Tsirkin
2019-10-26 21:52 ` [PULL 21/25] libqos: expose common virtqueue setup/cleanup functions Michael S. Tsirkin
2019-10-26 21:53 ` [PULL 22/25] libqos: make the virtio-pci BAR index configurable Michael S. Tsirkin
2019-10-26 21:53 ` Michael S. Tsirkin [this message]
2019-10-26 21:53 ` [PULL 24/25] libqos: add VIRTIO PCI 1.0 support Michael S. Tsirkin
2019-10-26 21:53 ` [PULL 25/25] virtio: drop unused virtio_device_stop_ioeventfd() function Michael S. Tsirkin
2019-10-28 14:38 ` [PULL 00/25] virtio: features, tests Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191026193824.11926-24-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=lvivier@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=slp@redhat.com \
    --cc=stefanha@redhat.com \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).