From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
qemu-devel@nongnu.org, qemu-arm@nongnu.org,
peter.maydell@linaro.org, mst@redhat.com, armbru@redhat.com,
jean-philippe.brucker@arm.com, bharatb.linux@gmail.com,
yang.zhong@intel.com, dgilbert@redhat.com, quintela@redhat.com
Cc: kevin.tian@intel.com, peterx@redhat.com, tnowicki@marvell.com
Subject: [PATCH for-5.0 v11 16/20] hw/arm/virt-acpi-build: Introduce fill_iort_idmap helper
Date: Fri, 22 Nov 2019 19:29:39 +0100 [thread overview]
Message-ID: <20191122182943.4656-17-eric.auger@redhat.com> (raw)
In-Reply-To: <20191122182943.4656-1-eric.auger@redhat.com>
To avoid code duplication, let's introduce an helper that
fills one IORT ID mappings array index.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
v8: new
---
hw/arm/virt-acpi-build.c | 43 ++++++++++++++++++++++++----------------
1 file changed, 26 insertions(+), 17 deletions(-)
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 4cd50175e0..825f3a79c0 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -368,6 +368,17 @@ static void acpi_dsdt_add_power_button(Aml *scope)
aml_append(scope, dev);
}
+static inline void
+fill_iort_idmap(AcpiIortIdMapping *idmap, int i,
+ uint32_t input_base, uint32_t id_count,
+ uint32_t output_base, uint32_t output_reference)
+{
+ idmap[i].input_base = cpu_to_le32(input_base);
+ idmap[i].id_count = cpu_to_le32(id_count);
+ idmap[i].output_base = cpu_to_le32(output_base);
+ idmap[i].output_reference = cpu_to_le32(output_reference);
+}
+
static void
build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
{
@@ -426,13 +437,12 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
smmu->gerr_gsiv = cpu_to_le32(irq + 2);
smmu->sync_gsiv = cpu_to_le32(irq + 3);
- /* Identity RID mapping covering the whole input RID range */
- idmap = &smmu->id_mapping_array[0];
- idmap->input_base = 0;
- idmap->id_count = cpu_to_le32(0xFFFF);
- idmap->output_base = 0;
- /* output IORT node is the ITS group node (the first node) */
- idmap->output_reference = cpu_to_le32(iort_node_offset);
+ /*
+ * Identity RID mapping covering the whole input RID range.
+ * The output IORT node is the ITS group node (the first node).
+ */
+ fill_iort_idmap(smmu->id_mapping_array, 0, 0, 0xffff, 0,
+ iort_node_offset);
}
/* Root Complex Node */
@@ -450,18 +460,17 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
rc->memory_properties.memory_flags = 0x3; /* CCA = CPM = DCAS = 1 */
rc->pci_segment_number = 0; /* MCFG pci_segment */
- /* Identity RID mapping covering the whole input RID range */
- idmap = &rc->id_mapping_array[0];
- idmap->input_base = 0;
- idmap->id_count = cpu_to_le32(0xFFFF);
- idmap->output_base = 0;
-
if (vms->iommu == VIRT_IOMMU_SMMUV3) {
- /* output IORT node is the smmuv3 node */
- idmap->output_reference = cpu_to_le32(smmu_offset);
+ /* Identity RID mapping and output IORT node is the iommu node */
+ fill_iort_idmap(rc->id_mapping_array, 0, 0, 0xFFFF, 0,
+ smmu_offset);
} else {
- /* output IORT node is the ITS group node (the first node) */
- idmap->output_reference = cpu_to_le32(iort_node_offset);
+ /*
+ * Identity RID mapping and the output IORT node is the ITS group
+ * node (the first node).
+ */
+ fill_iort_idmap(rc->id_mapping_array, 0, 0, 0xFFFF, 0,
+ iort_node_offset);
}
/*
--
2.20.1
next prev parent reply other threads:[~2019-11-22 18:40 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-22 18:29 [PATCH for-5.0 v11 00/20] VIRTIO-IOMMU device Eric Auger
2019-11-22 18:29 ` [PATCH for-5.0 v11 01/20] migration: Support QLIST migration Eric Auger
2019-11-27 11:46 ` Dr. David Alan Gilbert
2020-01-08 13:19 ` Juan Quintela
2020-01-08 13:40 ` Auger Eric
2020-01-08 13:51 ` Juan Quintela
2020-01-08 14:02 ` Auger Eric
2019-11-22 18:29 ` [PATCH for-5.0 v11 02/20] virtio-iommu: Add skeleton Eric Auger
2019-12-10 16:31 ` Jean-Philippe Brucker
2019-12-19 10:31 ` Auger Eric
2019-11-22 18:29 ` [PATCH for-5.0 v11 03/20] virtio-iommu: Decode the command payload Eric Auger
2019-12-10 16:32 ` Jean-Philippe Brucker
2019-12-10 19:14 ` Peter Xu
2019-11-22 18:29 ` [PATCH for-5.0 v11 04/20] virtio-iommu: Add the iommu regions Eric Auger
2019-12-10 16:34 ` Jean-Philippe Brucker
2019-12-19 18:11 ` Auger Eric
2019-12-10 19:18 ` Peter Xu
2019-11-22 18:29 ` [PATCH for-5.0 v11 05/20] virtio-iommu: Endpoint and domains structs and helpers Eric Auger
2019-12-10 16:37 ` Jean-Philippe Brucker
2019-12-19 18:31 ` Auger Eric
2019-12-20 17:00 ` Jean-Philippe Brucker
2019-12-23 9:11 ` Auger Eric
2019-11-22 18:29 ` [PATCH for-5.0 v11 06/20] virtio-iommu: Implement attach/detach command Eric Auger
2019-12-10 16:41 ` Jean-Philippe Brucker
2019-12-23 9:14 ` Auger Eric
2019-11-22 18:29 ` [PATCH for-5.0 v11 07/20] virtio-iommu: Implement map/unmap Eric Auger
2019-12-10 16:43 ` Jean-Philippe Brucker
2019-12-23 9:42 ` Auger Eric
2019-11-22 18:29 ` [PATCH for-5.0 v11 08/20] virtio-iommu: Implement translate Eric Auger
2019-12-10 16:43 ` Jean-Philippe Brucker
2019-12-10 19:33 ` Peter Xu
2019-12-19 10:30 ` Auger Eric
2019-12-19 13:33 ` Peter Xu
2019-12-19 14:38 ` Auger Eric
2019-12-19 14:49 ` Peter Xu
2019-12-19 15:09 ` Auger Eric
2019-12-20 16:26 ` Jean-Philippe Brucker
2019-12-20 16:51 ` Peter Xu
2020-01-06 17:06 ` Jean-Philippe Brucker
2020-01-06 17:58 ` Peter Xu
2020-01-07 10:10 ` Jean-Philippe Brucker
2020-01-08 16:55 ` Auger Eric
2020-01-09 8:47 ` Jean-Philippe Brucker
2020-01-09 8:58 ` Auger Eric
2020-01-09 10:40 ` Jean-Philippe Brucker
2020-01-09 11:01 ` Auger Eric
2020-01-09 11:15 ` Jean-Philippe Brucker
2020-01-09 11:32 ` Auger Eric
2019-11-22 18:29 ` [PATCH for-5.0 v11 09/20] virtio-iommu: Implement fault reporting Eric Auger
2019-12-10 16:44 ` Jean-Philippe Brucker
2019-11-22 18:29 ` [PATCH for-5.0 v11 10/20] virtio-iommu-pci: Add virtio iommu pci support Eric Auger
2019-12-10 16:44 ` Jean-Philippe Brucker
2019-11-22 18:29 ` [PATCH for-5.0 v11 11/20] hw/arm/virt: Add the virtio-iommu device tree mappings Eric Auger
2019-12-10 16:45 ` Jean-Philippe Brucker
2019-11-22 18:29 ` [PATCH for-5.0 v11 12/20] qapi: Introduce DEFINE_PROP_INTERVAL Eric Auger
2019-11-22 19:03 ` Dr. David Alan Gilbert
2019-11-25 13:12 ` Auger Eric
2019-12-12 12:17 ` Markus Armbruster
2019-12-12 15:13 ` Auger Eric
2019-12-13 10:03 ` Markus Armbruster
2019-11-22 18:29 ` [PATCH for-5.0 v11 13/20] virtio-iommu: Implement probe request Eric Auger
2019-12-10 16:46 ` Jean-Philippe Brucker
2019-12-10 19:36 ` Peter Xu
2019-11-22 18:29 ` [PATCH for-5.0 v11 14/20] virtio-iommu: Handle reserved regions in the translation process Eric Auger
2019-12-10 16:46 ` Jean-Philippe Brucker
2019-12-10 19:39 ` Peter Xu
2019-11-22 18:29 ` [PATCH for-5.0 v11 15/20] virtio-iommu-pci: Add array of Interval properties Eric Auger
2019-12-10 16:47 ` Jean-Philippe Brucker
2019-11-22 18:29 ` Eric Auger [this message]
2019-12-10 16:47 ` [PATCH for-5.0 v11 16/20] hw/arm/virt-acpi-build: Introduce fill_iort_idmap helper Jean-Philippe Brucker
2019-11-22 18:29 ` [PATCH for-5.0 v11 17/20] hw/arm/virt-acpi-build: Add virtio-iommu node in IORT table Eric Auger
2019-12-10 16:48 ` Jean-Philippe Brucker
2019-11-22 18:29 ` [PATCH for-5.0 v11 18/20] virtio-iommu: Support migration Eric Auger
2019-11-27 12:06 ` Dr. David Alan Gilbert
2019-12-10 16:50 ` Jean-Philippe Brucker
2019-12-19 11:03 ` Auger Eric
2019-12-10 20:01 ` Peter Xu
2019-12-24 7:39 ` Auger Eric
2019-11-22 18:29 ` [PATCH for-5.0 v11 19/20] pc: Add support for virtio-iommu-pci Eric Auger
2019-12-10 16:50 ` Jean-Philippe Brucker
2019-12-24 7:39 ` Auger Eric
2020-01-09 12:02 ` Michael S. Tsirkin
2020-01-09 13:34 ` Auger Eric
2019-11-22 18:29 ` [PATCH for-5.0 v11 20/20] tests: Add virtio-iommu test Eric Auger
2019-11-22 21:56 ` [PATCH for-5.0 v11 00/20] VIRTIO-IOMMU device no-reply
2019-12-11 16:40 ` Michael S. Tsirkin
2019-12-11 16:48 ` Auger Eric
2019-12-11 20:40 ` Michael S. Tsirkin
2019-12-12 15:05 ` Auger Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191122182943.4656-17-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=armbru@redhat.com \
--cc=bharatb.linux@gmail.com \
--cc=dgilbert@redhat.com \
--cc=eric.auger.pro@gmail.com \
--cc=jean-philippe.brucker@arm.com \
--cc=kevin.tian@intel.com \
--cc=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=tnowicki@marvell.com \
--cc=yang.zhong@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).