qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
To: bilalwasim676@gmail.com
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org,
	bilal_wasim@mentor.com, qemu-devel@nongnu.org,
	alistair@alistair23.me
Subject: Re: [PATCH v2] net/cadence_gem: Updating the GEM MAC IP to properly filter out multicast addresses.
Date: Fri, 29 Nov 2019 10:13:32 +0100	[thread overview]
Message-ID: <20191129091332.GA25295@toto> (raw)
In-Reply-To: <20191129085216.5108-1-bilalwasim676@gmail.com>

On Fri, Nov 29, 2019 at 01:52:16PM +0500, bilalwasim676@gmail.com wrote:
> From: bwasim <bilal_wasim@mentor.com>
> 
> The current code makes a bad assumption that the most-significant byte
> of the MAC address is used to determine if the address is multicast or
> unicast, but in reality only a single bit is used to determine this.
> This caused IPv6 to not work.. Fix is now in place and has been tested
> with ZCU102-A53 / IPv6 on a TAP interface. Works well..

Thanks Bilal,

Sorry, just one more thing I had missed, we need to update
gem_transmit_updatestats() aswell, in a similar way as we did with
gem_receive_updatestats().

Cheers,
Edgar


> 
> Signed-off-by: Bilal Wasim <bilal_wasim@mentor.com>
> ---
>  hw/net/cadence_gem.c | 19 ++++++++++++-------
>  1 file changed, 12 insertions(+), 7 deletions(-)
> 
> diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
> index b8be73dc55..042188c1ba 100644
> --- a/hw/net/cadence_gem.c
> +++ b/hw/net/cadence_gem.c
> @@ -34,6 +34,7 @@
>  #include "qemu/module.h"
>  #include "sysemu/dma.h"
>  #include "net/checksum.h"
> +#include "net/eth.h"
>  
>  #ifdef CADENCE_GEM_ERR_DEBUG
>  #define DB_PRINT(...) do { \
> @@ -601,7 +602,7 @@ static void gem_receive_updatestats(CadenceGEMState *s, const uint8_t *packet,
>      }
>  
>      /* Error-free Multicast Frames counter */
> -    if (packet[0] == 0x01) {
> +    if (is_multicast_ether_addr(packet)) {
>          s->regs[GEM_RXMULTICNT]++;
>      }
>  
> @@ -690,21 +691,25 @@ static int gem_mac_address_filter(CadenceGEMState *s, const uint8_t *packet)
>      }
>  
>      /* Accept packets -w- hash match? */
> -    if ((packet[0] == 0x01 && (s->regs[GEM_NWCFG] & GEM_NWCFG_MCAST_HASH)) ||
> -        (packet[0] != 0x01 && (s->regs[GEM_NWCFG] & GEM_NWCFG_UCAST_HASH))) {
> +    if ((is_multicast_ether_addr(packet)
> +        && (s->regs[GEM_NWCFG] & GEM_NWCFG_MCAST_HASH)) ||
> +        (is_unicast_ether_addr(packet)
> +        && (s->regs[GEM_NWCFG] & GEM_NWCFG_UCAST_HASH))) {
>          unsigned hash_index;
>  
>          hash_index = calc_mac_hash(packet);
>          if (hash_index < 32) {
>              if (s->regs[GEM_HASHLO] & (1<<hash_index)) {
> -                return packet[0] == 0x01 ? GEM_RX_MULTICAST_HASH_ACCEPT :
> -                                           GEM_RX_UNICAST_HASH_ACCEPT;
> +                return is_multicast_ether_addr(packet) ?
> +                       GEM_RX_MULTICAST_HASH_ACCEPT :
> +                       GEM_RX_UNICAST_HASH_ACCEPT;
>              }
>          } else {
>              hash_index -= 32;
>              if (s->regs[GEM_HASHHI] & (1<<hash_index)) {
> -                return packet[0] == 0x01 ? GEM_RX_MULTICAST_HASH_ACCEPT :
> -                                           GEM_RX_UNICAST_HASH_ACCEPT;
> +                return is_multicast_ether_addr(packet) ?
> +                       GEM_RX_MULTICAST_HASH_ACCEPT :
> +                       GEM_RX_UNICAST_HASH_ACCEPT;
>              }
>          }
>      }
> -- 
> 2.19.1.windows.1
> 


  reply	other threads:[~2019-11-29  9:18 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-29  8:52 [PATCH v2] net/cadence_gem: Updating the GEM MAC IP to properly filter out multicast addresses bilalwasim676
2019-11-29  9:13 ` Edgar E. Iglesias [this message]
2019-11-29  9:32   ` Bilal Wasim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191129091332.GA25295@toto \
    --to=edgar.iglesias@gmail.com \
    --cc=alistair@alistair23.me \
    --cc=bilal_wasim@mentor.com \
    --cc=bilalwasim676@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).