qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: philmd@redhat.com, Thomas Huth <thuth@redhat.com>,
	i@maskray.me, berrange@redhat.com
Subject: [PATCH v2 2/7] tcg: Remove softmmu code_gen_buffer fixed address
Date: Wed, 18 Dec 2019 12:34:36 -1000	[thread overview]
Message-ID: <20191218223441.23852-3-richard.henderson@linaro.org> (raw)
In-Reply-To: <20191218223441.23852-1-richard.henderson@linaro.org>

The commentary talks about "in concert with the addresses
assigned in the relevant linker script", except there is no
linker script for softmmu, nor has there been for some time.

(Do not confuse the user-only linker script editing that was
removed in the previous patch, because user-only does not
use this code_gen_buffer allocation method.)

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 accel/tcg/translate-all.c | 37 +++++--------------------------------
 1 file changed, 5 insertions(+), 32 deletions(-)

diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c
index 9f48da9472..88468a1c08 100644
--- a/accel/tcg/translate-all.c
+++ b/accel/tcg/translate-all.c
@@ -1032,47 +1032,20 @@ static inline void *alloc_code_gen_buffer(void)
 {
     int prot = PROT_WRITE | PROT_READ | PROT_EXEC;
     int flags = MAP_PRIVATE | MAP_ANONYMOUS;
-    uintptr_t start = 0;
     size_t size = tcg_ctx->code_gen_buffer_size;
     void *buf;
 
-    /* Constrain the position of the buffer based on the host cpu.
-       Note that these addresses are chosen in concert with the
-       addresses assigned in the relevant linker script file.  */
-# if defined(__PIE__) || defined(__PIC__)
-    /* Don't bother setting a preferred location if we're building
-       a position-independent executable.  We're more likely to get
-       an address near the main executable if we let the kernel
-       choose the address.  */
-# elif defined(__x86_64__) && defined(MAP_32BIT)
-    /* Force the memory down into low memory with the executable.
-       Leave the choice of exact location with the kernel.  */
-    flags |= MAP_32BIT;
-    /* Cannot expect to map more than 800MB in low memory.  */
-    if (size > 800u * 1024 * 1024) {
-        tcg_ctx->code_gen_buffer_size = size = 800u * 1024 * 1024;
-    }
-# elif defined(__sparc__)
-    start = 0x40000000ul;
-# elif defined(__s390x__)
-    start = 0x90000000ul;
-# elif defined(__mips__)
-#  if _MIPS_SIM == _ABI64
-    start = 0x128000000ul;
-#  else
-    start = 0x08000000ul;
-#  endif
-# endif
-
-    buf = mmap((void *)start, size, prot, flags, -1, 0);
+    buf = mmap(NULL, size, prot, flags, -1, 0);
     if (buf == MAP_FAILED) {
         return NULL;
     }
 
 #ifdef __mips__
     if (cross_256mb(buf, size)) {
-        /* Try again, with the original still mapped, to avoid re-acquiring
-           that 256mb crossing.  This time don't specify an address.  */
+        /*
+         * Try again, with the original still mapped, to avoid re-acquiring
+         * the same 256mb crossing.
+         */
         size_t size2;
         void *buf2 = mmap(NULL, size, prot, flags, -1, 0);
         switch ((int)(buf2 != MAP_FAILED)) {
-- 
2.20.1



  parent reply	other threads:[~2019-12-18 22:36 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-18 22:34 [PATCH v2 0/7] configure: Improve PIE and other linkage Richard Henderson
2019-12-18 22:34 ` [PATCH v2 1/7] configure: Drop adjustment of textseg Richard Henderson
2020-01-07 11:34   ` Alex Bennée
2019-12-18 22:34 ` Richard Henderson [this message]
2020-01-07 11:35   ` [PATCH v2 2/7] tcg: Remove softmmu code_gen_buffer fixed address Alex Bennée
2019-12-18 22:34 ` [PATCH v2 3/7] configure: Do not force pie=no for non-x86 Richard Henderson
2020-01-07 11:37   ` Philippe Mathieu-Daudé
2020-01-07 12:58   ` Alex Bennée
2019-12-18 22:34 ` [PATCH v2 4/7] configure: Always detect -no-pie toolchain support Richard Henderson
2020-01-07 13:16   ` Alex Bennée
2020-01-08  0:45     ` Richard Henderson
2019-12-18 22:34 ` [PATCH v2 5/7] configure: Unnest detection of -z,relro and -z,now Richard Henderson
2019-12-18 22:46   ` [PATCH v2 5/7] configure: Unnest detection of -z, relro and -z, now Philippe Mathieu-Daudé
2019-12-19  7:11     ` Fangrui Song
2020-01-07 13:18   ` Alex Bennée
2019-12-18 22:34 ` [PATCH v2 6/7] configure: Override the os default with --disable-pie Richard Henderson
2020-01-07 13:24   ` Alex Bennée
2019-12-18 22:34 ` [PATCH v2 7/7] configure: Support -static-pie if requested Richard Henderson
2020-01-07 13:45   ` Alex Bennée
2020-01-06  2:57 ` [PATCH v2 0/7] configure: Improve PIE and other linkage Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191218223441.23852-3-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=berrange@redhat.com \
    --cc=i@maskray.me \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).