From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, riku.voipio@iki.fi, laurent@vivier.eu,
peter.maydell@linaro.org
Subject: [PATCH 2/3] linux-user/i386: Split out gen_signal
Date: Tue, 14 Jan 2020 11:09:20 -1000 [thread overview]
Message-ID: <20200114210921.11216-3-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200114210921.11216-1-richard.henderson@linaro.org>
This is a bit tidier than open-coding the 5 lines necessary
to initialize the target_siginfo_t. In addition, this zeros
the remaining bytes of the target_siginfo_t, rather than
passing in garbage.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/i386/cpu_loop.c | 93 ++++++++++++++------------------------
1 file changed, 33 insertions(+), 60 deletions(-)
diff --git a/linux-user/i386/cpu_loop.c b/linux-user/i386/cpu_loop.c
index 024b6f4d58..e217cca5ee 100644
--- a/linux-user/i386/cpu_loop.c
+++ b/linux-user/i386/cpu_loop.c
@@ -81,13 +81,23 @@ static void set_idt(int n, unsigned int dpl)
}
#endif
+static void gen_signal(CPUX86State *env, int sig, int code, abi_ptr addr)
+{
+ target_siginfo_t info = {
+ .si_signo = sig,
+ .si_code = code,
+ ._sifields._sigfault._addr = addr
+ };
+
+ queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+}
+
void cpu_loop(CPUX86State *env)
{
CPUState *cs = env_cpu(env);
int trapnr;
abi_ulong pc;
abi_ulong ret;
- target_siginfo_t info;
for(;;) {
cpu_exec_start(cs);
@@ -134,70 +144,45 @@ void cpu_loop(CPUX86State *env)
#endif
case EXCP0B_NOSEG:
case EXCP0C_STACK:
- info.si_signo = TARGET_SIGBUS;
- info.si_errno = 0;
- info.si_code = TARGET_SI_KERNEL;
- info._sifields._sigfault._addr = 0;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ gen_signal(env, TARGET_SIGBUS, TARGET_SI_KERNEL, 0);
break;
case EXCP0D_GPF:
/* XXX: potential problem if ABI32 */
#ifndef TARGET_X86_64
if (env->eflags & VM_MASK) {
handle_vm86_fault(env);
- } else
-#endif
- {
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = TARGET_SI_KERNEL;
- info._sifields._sigfault._addr = 0;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
}
+#endif
+ gen_signal(env, TARGET_SIGSEGV, TARGET_SI_KERNEL, 0);
break;
case EXCP0E_PAGE:
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- if (!(env->error_code & 1))
- info.si_code = TARGET_SEGV_MAPERR;
- else
- info.si_code = TARGET_SEGV_ACCERR;
- info._sifields._sigfault._addr = env->cr[2];
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ gen_signal(env, TARGET_SIGSEGV,
+ (env->error_code & 1 ?
+ TARGET_SEGV_ACCERR : TARGET_SEGV_MAPERR),
+ env->cr[2]);
break;
case EXCP00_DIVZ:
#ifndef TARGET_X86_64
if (env->eflags & VM_MASK) {
handle_vm86_trap(env, trapnr);
- } else
-#endif
- {
- /* division by zero */
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
- info.si_code = TARGET_FPE_INTDIV;
- info._sifields._sigfault._addr = env->eip;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
}
+#endif
+ gen_signal(env, TARGET_SIGFPE, TARGET_FPE_INTDIV, env->eip);
break;
case EXCP01_DB:
case EXCP03_INT3:
#ifndef TARGET_X86_64
if (env->eflags & VM_MASK) {
handle_vm86_trap(env, trapnr);
- } else
+ break;
+ }
#endif
- {
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- if (trapnr == EXCP01_DB) {
- info.si_code = TARGET_TRAP_BRKPT;
- info._sifields._sigfault._addr = env->eip;
- } else {
- info.si_code = TARGET_SI_KERNEL;
- info._sifields._sigfault._addr = 0;
- }
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ if (trapnr == EXCP01_DB) {
+ gen_signal(env, TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->eip);
+ } else {
+ gen_signal(env, TARGET_SIGTRAP, TARGET_SI_KERNEL, 0);
}
break;
case EXCP04_INTO:
@@ -205,31 +190,19 @@ void cpu_loop(CPUX86State *env)
#ifndef TARGET_X86_64
if (env->eflags & VM_MASK) {
handle_vm86_trap(env, trapnr);
- } else
-#endif
- {
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = TARGET_SI_KERNEL;
- info._sifields._sigfault._addr = 0;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
}
+#endif
+ gen_signal(env, TARGET_SIGSEGV, TARGET_SI_KERNEL, 0);
break;
case EXCP06_ILLOP:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_ILLOPN;
- info._sifields._sigfault._addr = env->eip;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ gen_signal(env, TARGET_SIGILL, TARGET_ILL_ILLOPN, env->eip);
break;
case EXCP_INTERRUPT:
/* just indicate that signals should be handled asap */
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ gen_signal(env, TARGET_SIGTRAP, TARGET_TRAP_BRKPT, 0);
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
--
2.20.1
next prev parent reply other threads:[~2020-01-14 21:11 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-14 21:09 [PATCH 0/3] linux-user: Implement x86_64 vsyscalls Richard Henderson
2020-01-14 21:09 ` [PATCH 1/3] target/i386: Renumber EXCP_SYSCALL Richard Henderson
2020-01-15 7:22 ` Philippe Mathieu-Daudé
2020-01-15 9:55 ` Alex Bennée
2020-01-14 21:09 ` Richard Henderson [this message]
2020-01-15 7:22 ` [PATCH 2/3] linux-user/i386: Split out gen_signal Philippe Mathieu-Daudé
2020-01-15 9:58 ` Alex Bennée
2020-01-14 21:09 ` [PATCH 3/3] linux-user/i386: Emulate x86_64 vsyscalls Richard Henderson
2020-01-16 10:51 ` Alex Bennée
2020-01-16 16:26 ` Alex Bennée
2020-01-16 18:19 ` Richard Henderson
2020-01-16 18:22 ` Richard Henderson
2020-01-16 20:15 ` Alex Bennée
2020-01-14 23:35 ` [PATCH 0/3] linux-user: Implement " Paolo Bonzini
2020-01-15 7:01 ` Laurent Desnogues
2020-01-15 10:14 ` Laurent Vivier
2020-01-15 17:28 ` Richard Henderson
2020-01-16 14:05 ` Alex Bennée
2020-01-16 19:37 ` Richard Henderson
2020-01-16 14:30 ` Alex Bennée
2020-01-16 18:31 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200114210921.11216-3-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=laurent@vivier.eu \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=riku.voipio@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).