From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Juan Quintela <quintela@redhat.com>
Cc: "Laurent Vivier" <lvivier@redhat.com>,
"Thomas Huth" <thuth@redhat.com>,
"Daniel P. Berrangé" <berrange@redhat.com>,
"Eduardo Habkost" <ehabkost@redhat.com>,
qemu-devel@nongnu.org, "Markus Armbruster" <armbru@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>
Subject: Re: [PATCH v5 7/8] multifd: Add multifd-zstd-level parameter
Date: Tue, 11 Feb 2020 18:47:49 +0000 [thread overview]
Message-ID: <20200211184749.GI2751@work-vm> (raw)
In-Reply-To: <20200129115655.10414-8-quintela@redhat.com>
* Juan Quintela (quintela@redhat.com) wrote:
> Signed-off-by: Juan Quintela <quintela@redhat.com>
> ---
> migration/migration.c | 15 +++++++++++++++
> monitor/hmp-cmds.c | 4 ++++
> qapi/migration.json | 29 ++++++++++++++++++++++++++---
> 3 files changed, 45 insertions(+), 3 deletions(-)
>
> diff --git a/migration/migration.c b/migration/migration.c
> index 3b081e8147..b690500545 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -91,6 +91,8 @@
> #define DEFAULT_MIGRATE_MULTIFD_METHOD MULTIFD_METHOD_NONE
> /*0: means nocompress, 1: best speed, ... 9: best compress ratio */
> #define DEFAULT_MIGRATE_MULTIFD_ZLIB_LEVEL 1
> +/* 0: means nocompress, 1: best speed, ... 20: best compress ratio */
> +#define DEFAULT_MIGRATE_MULTIFD_ZSTD_LEVEL 1
>
> /* Background transfer rate for postcopy, 0 means unlimited, note
> * that page requests can still exceed this limit.
> @@ -805,6 +807,8 @@ MigrationParameters *qmp_query_migrate_parameters(Error **errp)
> params->multifd_method = s->parameters.multifd_method;
> params->has_multifd_zlib_level = true;
> params->multifd_zlib_level = s->parameters.multifd_zlib_level;
> + params->has_multifd_zstd_level = true;
> + params->multifd_zstd_level = s->parameters.multifd_zstd_level;
Do we really want different 'multifd_...._level's or just one
'multifd_compress_level' - or even just reuse the existing
'compress-level' parameter.
The only tricky thing about combining them is how to handle
the difference in allowed ranges; When would the right time be
to check it?
Markus/Eric: Any idea?
Dave
> params->has_xbzrle_cache_size = true;
> params->xbzrle_cache_size = s->parameters.xbzrle_cache_size;
> params->has_max_postcopy_bandwidth = true;
> @@ -1219,6 +1223,13 @@ static bool migrate_params_check(MigrationParameters *params, Error **errp)
> return false;
> }
>
> + if (params->has_multifd_zstd_level &&
> + (params->multifd_zstd_level > 20)) {
> + error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "multifd_zstd_level",
> + "is invalid, it should be in the range of 0 to 20");
> + return false;
> + }
> +
> if (params->has_xbzrle_cache_size &&
> (params->xbzrle_cache_size < qemu_target_page_size() ||
> !is_power_of_2(params->xbzrle_cache_size))) {
> @@ -3559,6 +3570,9 @@ static Property migration_properties[] = {
> DEFINE_PROP_UINT8("multifd-zlib-level", MigrationState,
> parameters.multifd_zlib_level,
> DEFAULT_MIGRATE_MULTIFD_ZLIB_LEVEL),
> + DEFINE_PROP_UINT8("multifd-zstd-level", MigrationState,
> + parameters.multifd_zstd_level,
> + DEFAULT_MIGRATE_MULTIFD_ZSTD_LEVEL),
> DEFINE_PROP_SIZE("xbzrle-cache-size", MigrationState,
> parameters.xbzrle_cache_size,
> DEFAULT_MIGRATE_XBZRLE_CACHE_SIZE),
> @@ -3651,6 +3665,7 @@ static void migration_instance_init(Object *obj)
> params->has_multifd_channels = true;
> params->has_multifd_method = true;
> params->has_multifd_zlib_level = true;
> + params->has_multifd_zstd_level = true;
> params->has_xbzrle_cache_size = true;
> params->has_max_postcopy_bandwidth = true;
> params->has_max_cpu_throttle = true;
> diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
> index 7f11866446..87db07694b 100644
> --- a/monitor/hmp-cmds.c
> +++ b/monitor/hmp-cmds.c
> @@ -1840,6 +1840,10 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
> p->has_multifd_zlib_level = true;
> visit_type_int(v, param, &p->multifd_zlib_level, &err);
> break;
> + case MIGRATION_PARAMETER_MULTIFD_ZSTD_LEVEL:
> + p->has_multifd_zstd_level = true;
> + visit_type_int(v, param, &p->multifd_zstd_level, &err);
> + break;
> case MIGRATION_PARAMETER_XBZRLE_CACHE_SIZE:
> p->has_xbzrle_cache_size = true;
> visit_type_size(v, param, &cache_size, &err);
> diff --git a/qapi/migration.json b/qapi/migration.json
> index 032ee7d3e6..bb5cb6b4f4 100644
> --- a/qapi/migration.json
> +++ b/qapi/migration.json
> @@ -610,6 +610,13 @@
> # will consume more CPU.
> # Defaults to 1. (Since 5.0)
> #
> +# @multifd-zstd-level: Set the compression level to be used in live
> +# migration, the compression level is an integer between 0
> +# and 20, where 0 means no compression, 1 means the best
> +# compression speed, and 20 means best compression ratio which
> +# will consume more CPU.
> +# Defaults to 1. (Since 5.0)
> +#
> # Since: 2.4
> ##
> { 'enum': 'MigrationParameter',
> @@ -623,7 +630,7 @@
> 'multifd-channels',
> 'xbzrle-cache-size', 'max-postcopy-bandwidth',
> 'max-cpu-throttle', 'multifd-method',
> - 'multifd-zlib-level' ] }
> + 'multifd-zlib-level' ,'multifd-zstd-level' ] }
>
> ##
> # @MigrateSetParameters:
> @@ -723,6 +730,13 @@
> # will consume more CPU.
> # Defaults to 1. (Since 5.0)
> #
> +# @multifd-zstd-level: Set the compression level to be used in live
> +# migration, the compression level is an integer between 0
> +# and 20, where 0 means no compression, 1 means the best
> +# compression speed, and 20 means best compression ratio which
> +# will consume more CPU.
> +# Defaults to 1. (Since 5.0)
> +#
> # Since: 2.4
> ##
> # TODO either fuse back into MigrationParameters, or make
> @@ -750,7 +764,8 @@
> '*max-postcopy-bandwidth': 'size',
> '*max-cpu-throttle': 'int',
> '*multifd-method': 'MultiFDMethod',
> - '*multifd-zlib-level': 'int' } }
> + '*multifd-zlib-level': 'int',
> + '*multifd-zstd-level': 'int' } }
>
> ##
> # @migrate-set-parameters:
> @@ -870,6 +885,13 @@
> # will consume more CPU.
> # Defaults to 1. (Since 5.0)
> #
> +# @multifd-zstd-level: Set the compression level to be used in live
> +# migration, the compression level is an integer between 0
> +# and 20, where 0 means no compression, 1 means the best
> +# compression speed, and 20 means best compression ratio which
> +# will consume more CPU.
> +# Defaults to 1. (Since 5.0)
> +#
> # Since: 2.4
> ##
> { 'struct': 'MigrationParameters',
> @@ -895,7 +917,8 @@
> '*max-postcopy-bandwidth': 'size',
> '*max-cpu-throttle': 'uint8',
> '*multifd-method': 'MultiFDMethod',
> - '*multifd-zlib-level': 'uint8' } }
> + '*multifd-zlib-level': 'uint8',
> + '*multifd-zstd-level': 'uint8' } }
>
> ##
> # @query-migrate-parameters:
> --
> 2.24.1
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2020-02-11 18:48 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 11:56 [PATCH v5 0/8] Multifd Migration Compression Juan Quintela
2020-01-29 11:56 ` [PATCH v5 1/8] multifd: Add multifd-method parameter Juan Quintela
2020-01-30 7:54 ` Markus Armbruster
2020-01-30 9:11 ` Juan Quintela
2020-01-30 12:17 ` Markus Armbruster
2020-02-11 18:50 ` Daniel P. Berrangé
2020-02-13 19:29 ` Juan Quintela
2020-01-29 11:56 ` [PATCH v5 2/8] migration: Add support for modules Juan Quintela
2020-02-11 10:54 ` Dr. David Alan Gilbert
2020-02-13 19:38 ` Juan Quintela
2020-01-29 11:56 ` [PATCH v5 3/8] multifd: Make no compression operations into its own structure Juan Quintela
2020-02-07 18:45 ` Dr. David Alan Gilbert
2020-02-11 11:23 ` Juan Quintela
2020-01-29 11:56 ` [PATCH v5 4/8] multifd: Add multifd-zlib-level parameter Juan Quintela
2020-01-30 8:03 ` Markus Armbruster
2020-01-30 8:56 ` Juan Quintela
2020-02-11 18:57 ` Daniel P. Berrangé
2020-02-13 13:27 ` Markus Armbruster
2020-02-13 16:33 ` Juan Quintela
2020-01-29 11:56 ` [PATCH v5 5/8] multifd: Add zlib compression multifd support Juan Quintela
2020-01-30 8:04 ` Markus Armbruster
2020-02-11 18:43 ` Dr. David Alan Gilbert
2020-02-13 20:24 ` Juan Quintela
2020-01-29 11:56 ` [PATCH v5 6/8] configure: Enable test and libs for zstd Juan Quintela
2020-02-11 20:11 ` Daniel P. Berrangé
2020-02-13 21:08 ` Juan Quintela
2020-02-14 10:26 ` Daniel P. Berrangé
2020-01-29 11:56 ` [PATCH v5 7/8] multifd: Add multifd-zstd-level parameter Juan Quintela
2020-01-30 8:08 ` Markus Armbruster
2020-02-11 18:47 ` Dr. David Alan Gilbert [this message]
2020-02-13 14:04 ` Markus Armbruster
2020-02-13 14:28 ` Dr. David Alan Gilbert
2020-02-13 15:33 ` Juan Quintela
2020-02-14 8:49 ` Markus Armbruster
2020-02-14 18:50 ` Dr. David Alan Gilbert
2020-01-29 11:56 ` [PATCH v5 8/8] multifd: Add zstd compression multifd support Juan Quintela
2020-01-30 8:08 ` Markus Armbruster
2020-02-11 20:01 ` Dr. David Alan Gilbert
2020-02-13 20:39 ` Juan Quintela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200211184749.GI2751@work-vm \
--to=dgilbert@redhat.com \
--cc=armbru@redhat.com \
--cc=berrange@redhat.com \
--cc=ehabkost@redhat.com \
--cc=lvivier@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).