QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Daniel P. Berrangé" <berrange@redhat.com>,
	"Markus Armbruster" <armbru@redhat.com>,
	"Michael Roth" <mdroth@linux.vnet.ibm.com>,
	"Stefan Hajnoczi" <stefanha@redhat.com>,
	"John Snow" <jsnow@redhat.com>
Subject: [PATCH v2 19/30] qapi/qapi-schema.json: Put headers in their own doc-comment blocks
Date: Thu, 13 Feb 2020 17:56:36 +0000
Message-ID: <20200213175647.17628-20-peter.maydell@linaro.org> (raw)
In-Reply-To: <20200213175647.17628-1-peter.maydell@linaro.org>

Our current QAPI doc-comment markup allows section headers
(introduced with a leading '=' or '==') anywhere in any documentation
comment.  This works for texinfo because the texi generator simply
prints a texinfo heading directive at that point in the output
stream.  For rST generation, since we're assembling a tree of
docutils nodes, this is awkward because a new section implies
starting a new section node at the top level of the tree and
generating text into there.

New section headings in the middle of the documentation of a command
or event would be pretty nonsensical, and in fact we only ever output
new headings using 'freeform' doc comment blocks whose only content
is the single line of the heading, with two exceptions, which are in
the introductory freeform-doc-block at the top of
qapi/qapi-schema.json.

Split that doc-comment up so that the heading lines are in their own
doc-comment.  This will allow us to tighten the specification to
insist that heading lines are always standalone, rather than
requiring the rST document generator to look at every line in a doc
comment block and handle headings in odd places.

This change makes no difference to the generated texi.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 qapi/qapi-schema.json | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/qapi/qapi-schema.json b/qapi/qapi-schema.json
index 9751b11f8f1..f7ba60a5d0b 100644
--- a/qapi/qapi-schema.json
+++ b/qapi/qapi-schema.json
@@ -1,7 +1,9 @@
 # -*- Mode: Python -*-
 ##
 # = Introduction
-#
+##
+
+##
 # This document describes all commands currently supported by QMP.
 #
 # Most of the time their usage is exactly the same as in the user Monitor, this
@@ -25,9 +27,13 @@
 #
 # Please, refer to the QMP specification (docs/interop/qmp-spec.txt) for
 # detailed information on the Server command and response formats.
-#
+##
+
+##
 # = Stability Considerations
-#
+##
+
+##
 # The current QMP command set (described in this file) may be useful for a
 # number of use cases, however it's limited and several commands have bad
 # defined semantics, specially with regard to command completion.
-- 
2.20.1



  parent reply index

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-13 17:56 [PATCH v2 00/30] Convert QAPI doc comments to generate rST instead of texinfo Peter Maydell
2020-02-13 17:56 ` [PATCH v2 01/30] configure: Allow user to specify sphinx-build binary Peter Maydell
2020-02-14  6:33   ` Markus Armbruster
2020-02-14  9:21     ` Peter Maydell
2020-02-14 12:20       ` Markus Armbruster
2020-02-14 12:39         ` Peter Maydell
2020-02-14 17:18           ` Markus Armbruster
2020-02-14 17:36             ` Peter Maydell
2020-02-15 10:37               ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 02/30] configure: Check that sphinx-build is using Python 3 Peter Maydell
2020-02-13 17:56 ` [PATCH v2 03/30] Makefile: Fix typo in dependency list for interop manpages Peter Maydell
2020-02-13 17:56 ` [PATCH v2 04/30] qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment Peter Maydell
2020-02-13 17:56 ` [PATCH v2 05/30] qga/qapi-schema.json: Fix indent level on doc comments Peter Maydell
2020-02-14 12:36   ` Markus Armbruster
2020-02-14 12:40     ` Peter Maydell
2020-02-14 14:26       ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 06/30] qga/qapi-schema.json: minor format fixups for rST Peter Maydell
2020-02-14 12:46   ` Markus Armbruster
2020-02-14 14:33     ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 07/30] qapi/block-core.json: Use literal block for ascii art Peter Maydell
2020-02-13 22:59   ` Aleksandar Markovic
2020-02-15 20:56     ` Philippe Mathieu-Daudé
2020-02-15 21:01       ` Aleksandar Markovic
2020-02-17  0:44         ` Philippe Mathieu-Daudé
2020-02-17  5:53           ` Samuel Thibault
2020-02-14 12:53   ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 08/30] qapi: Use ':' after @argument in doc comments Peter Maydell
2020-02-14 13:02   ` Markus Armbruster
2020-02-14 13:28     ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 09/30] qapi: Fix indent level on doc comments in json files Peter Maydell
2020-02-14 13:45   ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 10/30] qapi: Remove hardcoded tabs Peter Maydell
2020-02-13 17:56 ` [PATCH v2 11/30] qapi/ui.json: Put input-send-event body text in the right place Peter Maydell
2020-02-13 17:56 ` [PATCH v2 12/30] qapi/ui.json: Avoid `...' texinfo style quoting Peter Maydell
2020-02-13 17:56 ` [PATCH v2 13/30] qapi/block-core.json: Use explicit bulleted lists Peter Maydell
2020-02-13 17:56 ` [PATCH v2 14/30] qapi/ui.json: " Peter Maydell
2020-02-14 14:20   ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 15/30] qapi/{block, misc, tmp, net}.json: " Peter Maydell
2020-02-14 14:23   ` Markus Armbruster
2020-02-14 14:28     ` Peter Maydell
2020-02-14 15:46       ` Markus Armbruster
2020-02-14 15:48         ` Peter Maydell
2020-02-13 17:56 ` [PATCH v2 16/30] qapi: Add blank lines before " Peter Maydell
2020-02-14 14:33   ` Markus Armbruster
2020-02-14 16:02     ` Markus Armbruster
2020-02-14 16:16       ` Peter Maydell
2020-02-14 17:11         ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 17/30] qapi/migration.json: Replace _this_ with *this* Peter Maydell
2020-02-13 19:02   ` Philippe Mathieu-Daudé
2020-02-14 14:35   ` Markus Armbruster
2020-02-13 17:56 ` [PATCH v2 18/30] qapi: Delete all the "foo: dropped in n.n" notes Peter Maydell
2020-02-14  6:55   ` Markus Armbruster
2020-02-14 15:13     ` Markus Armbruster
2020-02-14 15:20       ` Peter Maydell
2020-02-13 17:56 ` Peter Maydell [this message]
2020-02-13 17:56 ` [PATCH v2 20/30] qapi/machine.json: Escape a literal '*' in doc comment Peter Maydell
2020-02-13 19:01   ` Philippe Mathieu-Daudé
2020-02-13 17:56 ` [PATCH v2 21/30] tests/qapi/doc-good.json: Clean up markup Peter Maydell
2020-02-13 17:56 ` [PATCH v2 22/30] scripts/qapi: Move doc-comment whitespace stripping to doc.py Peter Maydell
2020-02-13 17:56 ` [PATCH v2 23/30] scripts/qapi/parser.py: improve doc comment indent handling Peter Maydell
2020-02-13 17:56 ` [PATCH v2 24/30] docs/sphinx: Add new qapi-doc Sphinx extension Peter Maydell
2020-02-13 17:56 ` [PATCH v2 25/30] docs/interop: Convert qemu-ga-ref to rST Peter Maydell
2020-02-13 17:56 ` [PATCH v2 26/30] docs/interop: Convert qemu-qmp-ref " Peter Maydell
2020-02-17 15:10   ` Peter Maydell
2020-02-13 17:56 ` [PATCH v2 27/30] qapi: Use rST markup for literal blocks Peter Maydell
2020-02-13 17:56 ` [PATCH v2 28/30] qga/qapi-schema.json: Add some headings Peter Maydell
2020-02-13 17:56 ` [PATCH v2 29/30] scripts/qapi: Remove texinfo generation support Peter Maydell
2020-02-13 17:56 ` [PATCH v2 30/30] docs/devel/qapi-code-gen.txt: Update to new rST backend conventions Peter Maydell
2020-02-13 20:51 ` [PATCH v2 00/30] Convert QAPI doc comments to generate rST instead of texinfo no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200213175647.17628-20-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=armbru@redhat.com \
    --cc=berrange@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=mdroth@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git