From: Janosch Frank <frankja@linux.ibm.com>
To: qemu-devel@nongnu.org
Cc: mihajlov@linux.ibm.com, qemu-s390x@nongnu.org, cohuck@redhat.com,
david@redhat.com
Subject: [PATCH v3 14/17] s390x: protvirt: Disable address checks for PV guest IO emulation
Date: Fri, 14 Feb 2020 10:16:33 -0500 [thread overview]
Message-ID: <20200214151636.8764-15-frankja@linux.ibm.com> (raw)
In-Reply-To: <20200214151636.8764-1-frankja@linux.ibm.com>
IO instruction data is routed through SIDAD for protected guests, so
adresses do not need to be checked, as this is kernel memory.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
target/s390x/ioinst.c | 26 +++++++++++++++++++-------
1 file changed, 19 insertions(+), 7 deletions(-)
diff --git a/target/s390x/ioinst.c b/target/s390x/ioinst.c
index c437a1d8c6..e4102430aa 100644
--- a/target/s390x/ioinst.c
+++ b/target/s390x/ioinst.c
@@ -17,6 +17,16 @@
#include "trace.h"
#include "hw/s390x/s390-pci-bus.h"
+static uint64_t get_address_from_regs(CPUS390XState *env, uint32_t ipb,
+ uint8_t *ar)
+{
+ if (env->pv) {
+ *ar = 0;
+ return 0;
+ }
+ return decode_basedisp_s(env, ipb, ar);
+}
+
int ioinst_disassemble_sch_ident(uint32_t value, int *m, int *cssid, int *ssid,
int *schid)
{
@@ -114,7 +124,7 @@ void ioinst_handle_msch(S390CPU *cpu, uint64_t reg1, uint32_t ipb, uintptr_t ra)
CPUS390XState *env = &cpu->env;
uint8_t ar;
- addr = decode_basedisp_s(env, ipb, &ar);
+ addr = get_address_from_regs(env, ipb, &ar);
if (addr & 3) {
s390_program_interrupt(env, PGM_SPECIFICATION, ra);
return;
@@ -171,7 +181,7 @@ void ioinst_handle_ssch(S390CPU *cpu, uint64_t reg1, uint32_t ipb, uintptr_t ra)
CPUS390XState *env = &cpu->env;
uint8_t ar;
- addr = decode_basedisp_s(env, ipb, &ar);
+ addr = get_address_from_regs(env, ipb, &ar);
if (addr & 3) {
s390_program_interrupt(env, PGM_SPECIFICATION, ra);
return;
@@ -203,7 +213,7 @@ void ioinst_handle_stcrw(S390CPU *cpu, uint32_t ipb, uintptr_t ra)
CPUS390XState *env = &cpu->env;
uint8_t ar;
- addr = decode_basedisp_s(env, ipb, &ar);
+ addr = get_address_from_regs(env, ipb, &ar);
if (addr & 3) {
s390_program_interrupt(env, PGM_SPECIFICATION, ra);
return;
@@ -234,7 +244,7 @@ void ioinst_handle_stsch(S390CPU *cpu, uint64_t reg1, uint32_t ipb,
CPUS390XState *env = &cpu->env;
uint8_t ar;
- addr = decode_basedisp_s(env, ipb, &ar);
+ addr = get_address_from_regs(env, ipb, &ar);
if (addr & 3) {
s390_program_interrupt(env, PGM_SPECIFICATION, ra);
return;
@@ -303,7 +313,7 @@ int ioinst_handle_tsch(S390CPU *cpu, uint64_t reg1, uint32_t ipb, uintptr_t ra)
return -EIO;
}
trace_ioinst_sch_id("tsch", cssid, ssid, schid);
- addr = decode_basedisp_s(env, ipb, &ar);
+ addr = get_address_from_regs(env, ipb, &ar);
if (addr & 3) {
s390_program_interrupt(env, PGM_SPECIFICATION, ra);
return -EIO;
@@ -601,7 +611,7 @@ void ioinst_handle_chsc(S390CPU *cpu, uint32_t ipb, uintptr_t ra)
{
ChscReq *req;
ChscResp *res;
- uint64_t addr;
+ uint64_t addr = 0;
int reg;
uint16_t len;
uint16_t command;
@@ -610,7 +620,9 @@ void ioinst_handle_chsc(S390CPU *cpu, uint32_t ipb, uintptr_t ra)
trace_ioinst("chsc");
reg = (ipb >> 20) & 0x00f;
- addr = env->regs[reg];
+ if (!env->pv) {
+ addr = env->regs[reg];
+ }
/* Page boundary? */
if (addr & 0xfff) {
s390_program_interrupt(env, PGM_SPECIFICATION, ra);
--
2.20.1
next prev parent reply other threads:[~2020-02-14 15:24 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-14 15:16 [PATCH v3 00/17] s390x: Protected Virtualization support Janosch Frank
2020-02-14 15:16 ` [PATCH v3 01/17] Header sync Janosch Frank
2020-02-14 15:16 ` [PATCH v3 02/17] s390x: Add missing vcpu reset functions Janosch Frank
2020-02-18 12:29 ` Cornelia Huck
2020-02-18 13:12 ` Janosch Frank
2020-02-18 17:17 ` Cornelia Huck
2020-02-14 15:16 ` [PATCH v3 03/17] Sync pv Janosch Frank
2020-02-14 15:16 ` [PATCH v3 04/17] s390x: protvirt: Add diag308 subcodes 8 - 10 Janosch Frank
2020-02-20 10:07 ` Cornelia Huck
2020-02-20 11:06 ` Janosch Frank
2020-02-14 15:16 ` [PATCH v3 05/17] s390x: protvirt: Support unpack facility Janosch Frank
2020-02-20 10:39 ` Cornelia Huck
2020-02-20 11:21 ` Janosch Frank
2020-02-14 15:16 ` [PATCH v3 06/17] s390x: protvirt: Add migration blocker Janosch Frank
2020-02-20 10:48 ` Cornelia Huck
2020-02-20 11:24 ` Janosch Frank
2020-02-20 11:39 ` Cornelia Huck
2020-02-20 11:42 ` Janosch Frank
2020-02-14 15:16 ` [PATCH v3 07/17] s390x: protvirt: Handle diag 308 subcodes 0,1,3,4 Janosch Frank
2020-02-14 15:16 ` [PATCH v3 08/17] s390x: protvirt: KVM intercept changes Janosch Frank
2020-02-14 15:16 ` [PATCH v3 09/17] s390: protvirt: Move STSI data over SIDAD Janosch Frank
2020-02-20 10:54 ` Cornelia Huck
2020-02-20 11:25 ` Janosch Frank
2020-02-14 15:16 ` [PATCH v3 10/17] s390x: Add SIDA memory ops Janosch Frank
2020-02-14 15:16 ` [PATCH v3 11/17] s390x: protvirt: SCLP interpretation Janosch Frank
2020-02-14 15:16 ` [PATCH v3 12/17] s390x: protvirt: Set guest IPL PSW Janosch Frank
2020-02-14 15:16 ` [PATCH v3 13/17] s390x: protvirt: Move diag 308 data over SIDAD Janosch Frank
2020-02-20 11:00 ` Cornelia Huck
2020-02-20 11:29 ` Janosch Frank
2020-02-14 15:16 ` Janosch Frank [this message]
2020-02-14 15:16 ` [PATCH v3 15/17] s390x: protvirt: Move IO control structures over SIDA Janosch Frank
2020-02-14 15:16 ` [PATCH v3 16/17] s390x: protvirt: Handle SIGP store status correctly Janosch Frank
2020-02-20 11:02 ` Cornelia Huck
2020-02-20 11:30 ` Janosch Frank
2020-02-20 11:34 ` Cornelia Huck
2020-02-14 15:16 ` [PATCH v3 17/17] s390x: For now add unpack feature to GA1 Janosch Frank
2020-02-14 16:33 ` [PATCH v3 00/17] s390x: Protected Virtualization support no-reply
2020-02-18 13:13 ` Cornelia Huck
2020-02-18 13:15 ` Janosch Frank
2020-02-18 13:24 ` Cornelia Huck
2020-02-18 13:56 ` Janosch Frank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200214151636.8764-15-frankja@linux.ibm.com \
--to=frankja@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=mihajlov@linux.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).