QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Subject: [PULL 15/18] qapi: Use explicit bulleted lists
Date: Sat, 15 Feb 2020 12:41:30 +0100
Message-ID: <20200215114133.15097-16-armbru@redhat.com> (raw)
In-Reply-To: <20200215114133.15097-1-armbru@redhat.com>

From: Peter Maydell <peter.maydell@linaro.org>

A JSON block comment like this:
     Returns: nothing on success
              If @node is not a valid block device, DeviceNotFound
              If @name is not found, GenericError with an explanation

renders like this:

     Returns: nothing on success If node is not a valid block device,
     DeviceNotFound If name is not found, GenericError with an explanation

because whitespace is not significant.

Use an actual bulleted list, so that the formatting is correct.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-14-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-15-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-16-peter.maydell@linaro.org>
[Three commits squashed into one]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/block-core.json | 108 +++++++++++++++++++++----------------------
 qapi/block.json      |  33 ++++++-------
 qapi/misc.json       |  36 +++++++--------
 qapi/tpm.json        |   4 +-
 qapi/ui.json         |  63 +++++++++++++------------
 5 files changed, 119 insertions(+), 125 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 31f7a1281c..082aca3f69 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1326,8 +1326,8 @@
 #
 # @size:  new image size in bytes
 #
-# Returns: nothing on success
-#          If @device is not a valid block device, DeviceNotFound
+# Returns: - nothing on success
+#          - If @device is not a valid block device, DeviceNotFound
 #
 # Since: 0.14.0
 #
@@ -1510,8 +1510,8 @@
 #
 # For the arguments, see the documentation of BlockdevSnapshotSync.
 #
-# Returns: nothing on success
-#          If @device is not a valid block device, DeviceNotFound
+# Returns: - nothing on success
+#          - If @device is not a valid block device, DeviceNotFound
 #
 # Since: 0.14.0
 #
@@ -1586,9 +1586,8 @@
 #                when specifying the string or the image chain may
 #                not be able to be reopened again.
 #
-# Returns: Nothing on success
-#
-#          If "device" does not exist or cannot be determined, DeviceNotFound
+# Returns: - Nothing on success
+#          - If "device" does not exist or cannot be determined, DeviceNotFound
 #
 # Since: 2.1
 ##
@@ -1674,9 +1673,9 @@
 #                list without user intervention.
 #                Defaults to true. (Since 3.1)
 #
-# Returns: Nothing on success
-#          If @device does not exist, DeviceNotFound
-#          Any other error returns a GenericError.
+# Returns: - Nothing on success
+#          - If @device does not exist, DeviceNotFound
+#          - Any other error returns a GenericError.
 #
 # Since: 1.3
 #
@@ -1704,8 +1703,8 @@
 # The operation can be stopped before it has completed using the
 # block-job-cancel command.
 #
-# Returns: nothing on success
-#          If @device is not a valid block device, GenericError
+# Returns: - nothing on success
+#          - If @device is not a valid block device, GenericError
 #
 # Since: 1.6
 #
@@ -1730,8 +1729,8 @@
 # The operation can be stopped before it has completed using the
 # block-job-cancel command.
 #
-# Returns: nothing on success
-#          If @device is not a valid block device, DeviceNotFound
+# Returns: - nothing on success
+#          - If @device is not a valid block device, DeviceNotFound
 #
 # Since: 2.3
 #
@@ -1925,8 +1924,8 @@
 # format of the mirror image, default is to probe if mode='existing',
 # else the format of the source.
 #
-# Returns: nothing on success
-#          If @device is not a valid block device, GenericError
+# Returns: - nothing on success
+#          - If @device is not a valid block device, GenericError
 #
 # Since: 1.3
 #
@@ -2097,9 +2096,9 @@
 #
 # Create a dirty bitmap with a name on the node, and start tracking the writes.
 #
-# Returns: nothing on success
-#          If @node is not a valid block device or node, DeviceNotFound
-#          If @name is already taken, GenericError with an explanation
+# Returns: - nothing on success
+#          - If @node is not a valid block device or node, DeviceNotFound
+#          - If @name is already taken, GenericError with an explanation
 #
 # Since: 2.4
 #
@@ -2120,10 +2119,10 @@
 # with block-dirty-bitmap-add. If the bitmap is persistent, remove it from its
 # storage too.
 #
-# Returns: nothing on success
-#          If @node is not a valid block device or node, DeviceNotFound
-#          If @name is not found, GenericError with an explanation
-#          if @name is frozen by an operation, GenericError
+# Returns: - nothing on success
+#          - If @node is not a valid block device or node, DeviceNotFound
+#          - If @name is not found, GenericError with an explanation
+#          - if @name is frozen by an operation, GenericError
 #
 # Since: 2.4
 #
@@ -2144,9 +2143,9 @@
 # backup from this point in time forward will only backup clusters
 # modified after this clear operation.
 #
-# Returns: nothing on success
-#          If @node is not a valid block device, DeviceNotFound
-#          If @name is not found, GenericError with an explanation
+# Returns: - nothing on success
+#          - If @node is not a valid block device, DeviceNotFound
+#          - If @name is not found, GenericError with an explanation
 #
 # Since: 2.4
 #
@@ -2165,9 +2164,9 @@
 #
 # Enables a dirty bitmap so that it will begin tracking disk changes.
 #
-# Returns: nothing on success
-#          If @node is not a valid block device, DeviceNotFound
-#          If @name is not found, GenericError with an explanation
+# Returns: - nothing on success
+#          - If @node is not a valid block device, DeviceNotFound
+#          - If @name is not found, GenericError with an explanation
 #
 # Since: 4.0
 #
@@ -2186,9 +2185,9 @@
 #
 # Disables a dirty bitmap so that it will stop tracking disk changes.
 #
-# Returns: nothing on success
-#          If @node is not a valid block device, DeviceNotFound
-#          If @name is not found, GenericError with an explanation
+# Returns: - nothing on success
+#          - If @node is not a valid block device, DeviceNotFound
+#          - If @name is not found, GenericError with an explanation
 #
 # Since: 4.0
 #
@@ -2215,11 +2214,11 @@
 # of the source bitmaps. This can be used to achieve backup checkpoints, or in
 # simpler usages, to copy bitmaps.
 #
-# Returns: nothing on success
-#          If @node is not a valid block device, DeviceNotFound
-#          If any bitmap in @bitmaps or @target is not found, GenericError
-#          If any of the bitmaps have different sizes or granularities,
-#              GenericError
+# Returns: - nothing on success
+#          - If @node is not a valid block device, DeviceNotFound
+#          - If any bitmap in @bitmaps or @target is not found, GenericError
+#          - If any of the bitmaps have different sizes or granularities,
+#            GenericError
 #
 # Since: 4.0
 #
@@ -2251,10 +2250,10 @@
 #
 # Get bitmap SHA256.
 #
-# Returns: BlockDirtyBitmapSha256 on success
-#          If @node is not a valid block device, DeviceNotFound
-#          If @name is not found or if hashing has failed, GenericError with an
-#          explanation
+# Returns: - BlockDirtyBitmapSha256 on success
+#          - If @node is not a valid block device, DeviceNotFound
+#          - If @name is not found or if hashing has failed, GenericError with an
+#            explanation
 #
 # Since: 2.10
 ##
@@ -2371,8 +2370,8 @@
 # the device will be removed from its group and the rest of its
 # members will not be affected. The 'group' parameter is ignored.
 #
-# Returns: Nothing on success
-#          If @device is not a valid block device, DeviceNotFound
+# Returns: - Nothing on success
+#          - If @device is not a valid block device, DeviceNotFound
 #
 # Since: 1.1
 #
@@ -2622,7 +2621,8 @@
 #                list without user intervention.
 #                Defaults to true. (Since 3.1)
 #
-# Returns: Nothing on success. If @device does not exist, DeviceNotFound.
+# Returns: - Nothing on success.
+#          - If @device does not exist, DeviceNotFound.
 #
 # Since: 1.1
 #
@@ -2656,8 +2656,8 @@
 # @speed: the maximum speed, in bytes per second, or 0 for unlimited.
 #         Defaults to 0.
 #
-# Returns: Nothing on success
-#          If no background operation is active on this device, DeviceNotActive
+# Returns: - Nothing on success
+#          - If no background operation is active on this device, DeviceNotActive
 #
 # Since: 1.1
 ##
@@ -2696,8 +2696,8 @@
 #         abandon the job immediately (even if it is paused) instead of waiting
 #         for the destination to complete its final synchronization (since 1.3)
 #
-# Returns: Nothing on success
-#          If no background operation is active on this device, DeviceNotActive
+# Returns: - Nothing on success
+#          - If no background operation is active on this device, DeviceNotActive
 #
 # Since: 1.1
 ##
@@ -2720,8 +2720,8 @@
 #          the name of the parameter), but since QEMU 2.7 it can have
 #          other values.
 #
-# Returns: Nothing on success
-#          If no background operation is active on this device, DeviceNotActive
+# Returns: - Nothing on success
+#          - If no background operation is active on this device, DeviceNotActive
 #
 # Since: 1.3
 ##
@@ -2742,8 +2742,8 @@
 #          the name of the parameter), but since QEMU 2.7 it can have
 #          other values.
 #
-# Returns: Nothing on success
-#          If no background operation is active on this device, DeviceNotActive
+# Returns: - Nothing on success
+#          - If no background operation is active on this device, DeviceNotActive
 #
 # Since: 1.3
 ##
@@ -2770,8 +2770,8 @@
 #          the name of the parameter), but since QEMU 2.7 it can have
 #          other values.
 #
-# Returns: Nothing on success
-#          If no background operation is active on this device, DeviceNotActive
+# Returns: - Nothing on success
+#          - If no background operation is active on this device, DeviceNotActive
 #
 # Since: 1.3
 ##
diff --git a/qapi/block.json b/qapi/block.json
index 65eaacf31a..da19834db4 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -115,15 +115,12 @@
 #
 # For the arguments, see the documentation of BlockdevSnapshotInternal.
 #
-# Returns: nothing on success
-#
-#          If @device is not a valid block device, GenericError
-#
-#          If any snapshot matching @name exists, or @name is empty,
-#          GenericError
-#
-#          If the format of the image used does not support it,
-#          BlockFormatFeatureNotSupported
+# Returns: - nothing on success
+#          - If @device is not a valid block device, GenericError
+#          - If any snapshot matching @name exists, or @name is empty,
+#            GenericError
+#          - If the format of the image used does not support it,
+#            BlockFormatFeatureNotSupported
 #
 # Since: 1.7
 #
@@ -154,12 +151,12 @@
 #
 # @name: optional the snapshot's name to be deleted
 #
-# Returns: SnapshotInfo on success
-#          If @device is not a valid block device, GenericError
-#          If snapshot not found, GenericError
-#          If the format of the image used does not support it,
-#          BlockFormatFeatureNotSupported
-#          If @id and @name are both not specified, GenericError
+# Returns: - SnapshotInfo on success
+#          - If @device is not a valid block device, GenericError
+#          - If snapshot not found, GenericError
+#          - If the format of the image used does not support it,
+#            BlockFormatFeatureNotSupported
+#          - If @id and @name are both not specified, GenericError
 #
 # Since: 1.7
 #
@@ -197,10 +194,8 @@
 # @force: If true, eject regardless of whether the drive is locked.
 #         If not specified, the default value is false.
 #
-# Returns:  Nothing on success
-#
-#           If @device is not a valid block device, DeviceNotFound
-#
+# Returns: - Nothing on success
+#          - If @device is not a valid block device, DeviceNotFound
 # Notes:    Ejecting a device with no media results in success
 #
 # Since: 0.14.0
diff --git a/qapi/misc.json b/qapi/misc.json
index 46e0abdfe7..af00279e7b 100644
--- a/qapi/misc.json
+++ b/qapi/misc.json
@@ -430,12 +430,10 @@
 #
 # Return information about the balloon device.
 #
-# Returns: @BalloonInfo on success
-#
-#          If the balloon driver is enabled but not functional because the KVM
-#          kernel module cannot support it, KvmMissingCap
-#
-#          If no balloon device is present, DeviceNotActive
+# Returns: - @BalloonInfo on success
+#          - If the balloon driver is enabled but not functional because the KVM
+#            kernel module cannot support it, KvmMissingCap
+#          - If no balloon device is present, DeviceNotActive
 #
 # Since: 0.14.0
 #
@@ -492,8 +490,8 @@
 #
 # @bar: the index of the Base Address Register for this region
 #
-# @type: 'io' if the region is a PIO region
-#        'memory' if the region is a MMIO region
+# @type: - 'io' if the region is a PIO region
+#        - 'memory' if the region is a MMIO region
 #
 # @size: memory size
 #
@@ -1004,10 +1002,10 @@
 #
 # @value: the target size of the balloon in bytes
 #
-# Returns: Nothing on success
-#          If the balloon driver is enabled but not functional because the KVM
+# Returns: - Nothing on success
+#          - If the balloon driver is enabled but not functional because the KVM
 #            kernel module cannot support it, KvmMissingCap
-#          If no balloon device is present, DeviceNotActive
+#          - If no balloon device is present, DeviceNotActive
 #
 # Notes: This command just issues a request to the guest.  When it returns,
 #        the balloon size may not have changed.  A guest can change the balloon
@@ -1086,8 +1084,8 @@
 #       If @device is 'vnc' and @target is 'password', this is the new VNC
 #       password to set.  See change-vnc-password for additional notes.
 #
-# Returns: Nothing on success.
-#          If @device is not a valid block device, DeviceNotFound
+# Returns: - Nothing on success.
+#          - If @device is not a valid block device, DeviceNotFound
 #
 # Notes: This interface is deprecated, and it is strongly recommended that you
 #        avoid using it.  For changing block devices, use
@@ -1237,11 +1235,9 @@
 #
 # @opaque: A free-form string that can be used to describe the fd.
 #
-# Returns: @AddfdInfo on success
-#
-#          If file descriptor was not received, FdNotSupplied
-#
-#          If @fdset-id is a negative value, InvalidParameterValue
+# Returns: - @AddfdInfo on success
+#          - If file descriptor was not received, FdNotSupplied
+#          - If @fdset-id is a negative value, InvalidParameterValue
 #
 # Notes: The list of fd sets is shared by all monitor connections.
 #
@@ -1269,8 +1265,8 @@
 #
 # @fd: The file descriptor that is to be removed.
 #
-# Returns: Nothing on success
-#          If @fdset-id or @fd is not found, FdNotFound
+# Returns: - Nothing on success
+#          - If @fdset-id or @fd is not found, FdNotFound
 #
 # Since: 1.2.0
 #
diff --git a/qapi/tpm.json b/qapi/tpm.json
index 63878aa0f4..dc1f081739 100644
--- a/qapi/tpm.json
+++ b/qapi/tpm.json
@@ -96,8 +96,8 @@
 #
 # A union referencing different TPM backend types' configuration options
 #
-# @type: 'passthrough' The configuration options for the TPM passthrough type
-#        'emulator' The configuration options for TPM emulator backend type
+# @type: - 'passthrough' The configuration options for the TPM passthrough type
+#        - 'emulator' The configuration options for TPM emulator backend type
 #
 # Since: 1.5
 ##
diff --git a/qapi/ui.json b/qapi/ui.json
index 088a8680ef..e4bd3d8ea7 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -12,8 +12,8 @@
 #
 # Sets the password of a remote display session.
 #
-# @protocol: 'vnc' to modify the VNC server password
-#            'spice' to modify the Spice server password
+# @protocol: - 'vnc' to modify the VNC server password
+#            - 'spice' to modify the Spice server password
 #
 # @password: the new password
 #
@@ -23,8 +23,8 @@
 #             'disconnect' to disconnect existing clients
 #             'keep' to maintain existing clients
 #
-# Returns: Nothing on success
-#          If Spice is not enabled, DeviceNotFound
+# Returns: - Nothing on success
+#          - If Spice is not enabled, DeviceNotFound
 #
 # Since: 0.14.0
 #
@@ -46,13 +46,14 @@
 # @protocol: the name of the remote display protocol 'vnc' or 'spice'
 #
 # @time: when to expire the password.
-#        'now' to expire the password immediately
-#        'never' to cancel password expiration
-#        '+INT' where INT is the number of seconds from now (integer)
-#        'INT' where INT is the absolute time in seconds
 #
-# Returns: Nothing on success
-#          If @protocol is 'spice' and Spice is not active, DeviceNotFound
+#        - 'now' to expire the password immediately
+#        - 'never' to cancel password expiration
+#        - '+INT' where INT is the number of seconds from now (integer)
+#        - 'INT' where INT is the absolute time in seconds
+#
+# Returns: - Nothing on success
+#          - If @protocol is 'spice' and Spice is not active, DeviceNotFound
 #
 # Since: 0.14.0
 #
@@ -201,9 +202,10 @@
 # @tls-port: The SPICE server's TLS port number.
 #
 # @auth: the current authentication type used by the server
-#        'none'  if no authentication is being used
-#        'spice' uses SASL or direct TLS authentication, depending on command
-#                line options
+#
+#        - 'none'  if no authentication is being used
+#        - 'spice' uses SASL or direct TLS authentication, depending on command
+#          line options
 #
 # @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
 #              be determined by the client or the server, or unknown if spice
@@ -433,27 +435,28 @@
 # @host: The hostname the VNC server is bound to.  This depends on
 #        the name resolution on the host and may be an IP address.
 #
-# @family: 'ipv6' if the host is listening for IPv6 connections
-#                    'ipv4' if the host is listening for IPv4 connections
-#                    'unix' if the host is listening on a unix domain socket
-#                    'unknown' otherwise
+# @family: - 'ipv6' if the host is listening for IPv6 connections
+#          - 'ipv4' if the host is listening for IPv4 connections
+#          - 'unix' if the host is listening on a unix domain socket
+#          - 'unknown' otherwise
 #
 # @service: The service name of the server's port.  This may depends
 #           on the host system's service database so symbolic names should not
 #           be relied on.
 #
 # @auth: the current authentication type used by the server
-#        'none' if no authentication is being used
-#        'vnc' if VNC authentication is being used
-#        'vencrypt+plain' if VEncrypt is used with plain text authentication
-#        'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
-#        'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
-#        'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
-#        'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
-#        'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
-#        'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
-#        'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
-#        'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
+#
+#        - 'none' if no authentication is being used
+#        - 'vnc' if VNC authentication is being used
+#        - 'vencrypt+plain' if VEncrypt is used with plain text authentication
+#        - 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
+#        - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
+#        - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
+#        - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
+#        - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
+#        - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
+#        - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
+#        - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
 #
 # @clients: a list of @VncClientInfo of all currently connected clients
 #
@@ -840,8 +843,8 @@
 # @hold-time: time to delay key up events, milliseconds. Defaults
 #             to 100
 #
-# Returns: Nothing on success
-#          If key is unknown or redundant, InvalidParameter
+# Returns: - Nothing on success
+#          - If key is unknown or redundant, InvalidParameter
 #
 # Since: 1.3.0
 #
-- 
2.21.1



  parent reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-15 11:41 [PULL 00/18] QAPI patches for 2020-02-15 Markus Armbruster
2020-02-15 11:41 ` [PULL 01/18] qapi: Expand documentation for LostTickPolicy Markus Armbruster
2020-02-15 11:41 ` [PULL 02/18] configure: Allow user to specify sphinx-build binary Markus Armbruster
2020-02-15 11:41 ` [PULL 03/18] configure: Pick sphinx-build-3 when available Markus Armbruster
2020-02-15 11:41 ` [PULL 04/18] configure: Check that sphinx-build is using Python 3 Markus Armbruster
2020-02-15 11:41 ` [PULL 05/18] Makefile: Fix typo in dependency list for interop manpages Markus Armbruster
2020-02-15 11:41 ` [PULL 06/18] qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment Markus Armbruster
2020-02-15 11:41 ` [PULL 07/18] qga/qapi-schema.json: Fix indent level on doc comments Markus Armbruster
2020-02-15 11:41 ` [PULL 08/18] qga/qapi-schema.json: minor format fixups for rST Markus Armbruster
2020-02-15 11:41 ` [PULL 09/18] qapi/block-core.json: Use literal block for ascii art Markus Armbruster
2020-02-15 11:41 ` [PULL 10/18] qapi: Fix incorrect "Not documented" claims in QMP documentation Markus Armbruster
2020-02-15 11:41 ` [PULL 11/18] qapi: Fix indent level on doc comments in json files Markus Armbruster
2020-02-15 11:41 ` [PULL 12/18] qapi: Remove hardcoded tabs Markus Armbruster
2020-02-15 11:41 ` [PULL 13/18] qapi/ui.json: Put input-send-event body text in the right place Markus Armbruster
2020-02-15 11:41 ` [PULL 14/18] qapi/ui.json: Avoid `...' Texinfo style quoting Markus Armbruster
2020-02-15 11:41 ` Markus Armbruster [this message]
2020-02-15 11:41 ` [PULL 16/18] qapi: Add blank lines before bulleted lists Markus Armbruster
2020-02-15 11:41 ` [PULL 17/18] qapi/migration.json: Replace _this_ with *this* Markus Armbruster
2020-02-15 11:41 ` [PULL 18/18] qapi: Delete all the "foo: dropped in n.n" notes Markus Armbruster
2020-02-17  9:57 ` [PULL 00/18] QAPI patches for 2020-02-15 Peter Maydell

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200215114133.15097-16-armbru@redhat.com \
    --to=armbru@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git