QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Subject: [PULL 07/18] qga/qapi-schema.json: Fix indent level on doc comments
Date: Sat, 15 Feb 2020 12:41:22 +0100
Message-ID: <20200215114133.15097-8-armbru@redhat.com> (raw)
In-Reply-To: <20200215114133.15097-1-armbru@redhat.com>

From: Peter Maydell <peter.maydell@linaro.org>

The current doc generation doesn't care much about indentation levels,
but we would like to switch to an rST format, and rST does care about
indentation.

Make the doc comments more strongly consistent about indentation
for multiline constructs like:

@arg: description line 1
      description line 2

Returns: line one
         line 2

so that there is always exactly one space after the colon, and
subsequent lines align with the first.

This commit is a purely whitespace change, and it does not alter the
generated .texi files (because the texi generation code strips away
all the extra whitespace).  This does mean that we end up with some
over-length lines.

Note that when the documentation for an argument fits on a single
line like this:

@arg: one line only

then stray extra spaces after the ':' don't affect the rST output, so
I have not attempted to methodically fix them, though the preference
is a single space here too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-6-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qga/qapi-schema.json | 62 ++++++++++++++++++++++----------------------
 1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index 23ce6af597..7661b2b3b4 100644
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -416,7 +416,7 @@
 # Returns: GuestFsfreezeStatus ("thawed", "frozen", etc., as defined below)
 #
 # Note: This may fail to properly report the current state as a result of
-# some other guest processes having issued an fs freeze/thaw.
+#       some other guest processes having issued an fs freeze/thaw.
 #
 # Since: 0.15.0
 ##
@@ -431,13 +431,13 @@
 # unfreeze.
 #
 # Note: On Windows, the command is implemented with the help of a
-# Volume Shadow-copy Service DLL helper. The frozen state is limited
-# for up to 10 seconds by VSS.
+#       Volume Shadow-copy Service DLL helper. The frozen state is limited
+#       for up to 10 seconds by VSS.
 #
 # Returns: Number of file systems currently frozen. On error, all filesystems
-# will be thawed. If no filesystems are frozen as a result of this call,
-# then @guest-fsfreeze-status will remain "thawed" and calling
-# @guest-fsfreeze-thaw is not necessary.
+#          will be thawed. If no filesystems are frozen as a result of this call,
+#          then @guest-fsfreeze-status will remain "thawed" and calling
+#          @guest-fsfreeze-thaw is not necessary.
 #
 # Since: 0.15.0
 ##
@@ -455,7 +455,7 @@
 #               Invalid mount points are ignored.
 #
 # Returns: Number of file systems currently frozen. On error, all filesystems
-# will be thawed.
+#          will be thawed.
 #
 # Since: 2.2
 ##
@@ -511,12 +511,12 @@
 # Discard (or "trim") blocks which are not in use by the filesystem.
 #
 # @minimum:
-#       Minimum contiguous free range to discard, in bytes. Free ranges
-#       smaller than this may be ignored (this is a hint and the guest
-#       may not respect it).  By increasing this value, the fstrim
-#       operation will complete more quickly for filesystems with badly
-#       fragmented free space, although not all blocks will be discarded.
-#       The default value is zero, meaning "discard every free block".
+#           Minimum contiguous free range to discard, in bytes. Free ranges
+#           smaller than this may be ignored (this is a hint and the guest
+#           may not respect it).  By increasing this value, the fstrim
+#           operation will complete more quickly for filesystems with badly
+#           fragmented free space, although not all blocks will be discarded.
+#           The default value is zero, meaning "discard every free block".
 #
 # Returns: A @GuestFilesystemTrimResponse which contains the
 #          status of all trimmed paths. (since 2.4)
@@ -693,7 +693,7 @@
 # @ip-addresses: List of addresses assigned to @name
 #
 # @statistics: various statistic counters related to @name
-# (since 2.11)
+#              (since 2.11)
 #
 # Since: 1.1
 ##
@@ -743,7 +743,7 @@
 # This is a read-only operation.
 #
 # Returns: The list of all VCPUs the guest knows about. Each VCPU is put on the
-# list exactly once, but their order is unspecified.
+#          list exactly once, but their order is unspecified.
 #
 # Since: 1.5
 ##
@@ -937,8 +937,8 @@
 # This is a read-only operation.
 #
 # Returns: The list of all memory blocks the guest knows about.
-# Each memory block is put on the list exactly once, but their order
-# is unspecified.
+#          Each memory block is put on the list exactly once, but their order
+#          is unspecified.
 #
 # Since: 2.3
 ##
@@ -971,9 +971,9 @@
 # @response: the result of memory block operation.
 #
 # @error-code: the error number.
-#               When memory block operation fails, we assign the value of
-#               'errno' to this member, it indicates what goes wrong.
-#               When the operation succeeds, it will be omitted.
+#              When memory block operation fails, we assign the value of
+#              'errno' to this member, it indicates what goes wrong.
+#              When the operation succeeds, it will be omitted.
 #
 # Since: 2.3
 ##
@@ -1040,15 +1040,15 @@
 # @exited: true if process has already terminated.
 # @exitcode: process exit code if it was normally terminated.
 # @signal: signal number (linux) or unhandled exception code
-#       (windows) if the process was abnormally terminated.
+#          (windows) if the process was abnormally terminated.
 # @out-data: base64-encoded stdout of the process
 # @err-data: base64-encoded stderr of the process
-#       Note: @out-data and @err-data are present only
-#       if 'capture-output' was specified for 'guest-exec'
+#            Note: @out-data and @err-data are present only
+#            if 'capture-output' was specified for 'guest-exec'
 # @out-truncated: true if stdout was not fully captured
-#       due to size limitation.
+#                 due to size limitation.
 # @err-truncated: true if stderr was not fully captured
-#       due to size limitation.
+#                 due to size limitation.
 #
 # Since: 2.5
 ##
@@ -1131,8 +1131,8 @@
 
 ##
 # @GuestUser:
-# @user:       Username
-# @domain:     Logon domain (windows only)
+# @user: Username
+# @domain: Logon domain (windows only)
 # @login-time: Time of login of this user on the computer. If multiple
 #              instances of the user are logged in, the earliest login time is
 #              reported. The value is in fractional seconds since epoch time.
@@ -1156,10 +1156,10 @@
 ##
 # @GuestTimezone:
 #
-# @zone:    Timezone name. These values may differ depending on guest/OS and
-#           should only be used for informational purposes.
-# @offset:  Offset to UTC in seconds, negative numbers for time zones west of
-#           GMT, positive numbers for east
+# @zone: Timezone name. These values may differ depending on guest/OS and
+#        should only be used for informational purposes.
+# @offset: Offset to UTC in seconds, negative numbers for time zones west of
+#          GMT, positive numbers for east
 #
 # Since: 2.10
 ##
-- 
2.21.1



  parent reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-15 11:41 [PULL 00/18] QAPI patches for 2020-02-15 Markus Armbruster
2020-02-15 11:41 ` [PULL 01/18] qapi: Expand documentation for LostTickPolicy Markus Armbruster
2020-02-15 11:41 ` [PULL 02/18] configure: Allow user to specify sphinx-build binary Markus Armbruster
2020-02-15 11:41 ` [PULL 03/18] configure: Pick sphinx-build-3 when available Markus Armbruster
2020-02-15 11:41 ` [PULL 04/18] configure: Check that sphinx-build is using Python 3 Markus Armbruster
2020-02-15 11:41 ` [PULL 05/18] Makefile: Fix typo in dependency list for interop manpages Markus Armbruster
2020-02-15 11:41 ` [PULL 06/18] qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment Markus Armbruster
2020-02-15 11:41 ` Markus Armbruster [this message]
2020-02-15 11:41 ` [PULL 08/18] qga/qapi-schema.json: minor format fixups for rST Markus Armbruster
2020-02-15 11:41 ` [PULL 09/18] qapi/block-core.json: Use literal block for ascii art Markus Armbruster
2020-02-15 11:41 ` [PULL 10/18] qapi: Fix incorrect "Not documented" claims in QMP documentation Markus Armbruster
2020-02-15 11:41 ` [PULL 11/18] qapi: Fix indent level on doc comments in json files Markus Armbruster
2020-02-15 11:41 ` [PULL 12/18] qapi: Remove hardcoded tabs Markus Armbruster
2020-02-15 11:41 ` [PULL 13/18] qapi/ui.json: Put input-send-event body text in the right place Markus Armbruster
2020-02-15 11:41 ` [PULL 14/18] qapi/ui.json: Avoid `...' Texinfo style quoting Markus Armbruster
2020-02-15 11:41 ` [PULL 15/18] qapi: Use explicit bulleted lists Markus Armbruster
2020-02-15 11:41 ` [PULL 16/18] qapi: Add blank lines before " Markus Armbruster
2020-02-15 11:41 ` [PULL 17/18] qapi/migration.json: Replace _this_ with *this* Markus Armbruster
2020-02-15 11:41 ` [PULL 18/18] qapi: Delete all the "foo: dropped in n.n" notes Markus Armbruster
2020-02-17  9:57 ` [PULL 00/18] QAPI patches for 2020-02-15 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200215114133.15097-8-armbru@redhat.com \
    --to=armbru@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git