From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Andrew Baumann" <Andrew.Baumann@microsoft.com>,
"Igor Mammedov" <imammedo@redhat.com>
Subject: [PATCH 6/8] tests/boot_linux_console: Test booting U-Boot on the Raspberry Pi 2
Date: Sat, 15 Feb 2020 20:22:14 +0100 [thread overview]
Message-ID: <20200215192216.4899-7-f4bug@amsat.org> (raw)
In-Reply-To: <20200215192216.4899-1-f4bug@amsat.org>
This test runs U-Boot on the Raspberry Pi 2.
It is very simple and fast:
$ avocado --show=app,console run -t raspi2 -t u-boot tests/acceptance/
JOB LOG : avocado/job-results/job-2020-01-20T23.40-2424777/job.log
(1/1) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_uboot:
console: MMC: sdhci@7e300000: 0
console: Loading Environment from FAT... Card did not respond to voltage select!
console: In: serial
console: Out: vidconsole
console: Err: vidconsole
console: Net: No ethernet found.
console: starting USB...
console: USB0: Port not available.
console: Hit any key to stop autoboot: 0
console: U-Boot>
console: U-Boot> bdinfo
console: arch_number = 0x00000000
console: boot_params = 0x00000100
console: DRAM bank = 0x00000000
console: -> start = 0x00000000
console: -> size = 0x3c000000
console: baudrate = 115200 bps
console: TLB addr = 0x3bff0000
console: relocaddr = 0x3bf64000
console: reloc off = 0x3bf5c000
console: irq_sp = 0x3bb5fec0
console: sp start = 0x3bb5feb0
console: Early malloc usage: 2a4 / 400
console: fdt_blob = 0x3bfbdfb0
console: U-Boot> version
console: U-Boot 2019.01+dfsg-7 (May 14 2019 - 02:07:44 +0000)
console: gcc (Debian 8.3.0-7) 8.3.0
console: GNU ld (GNU Binutils for Debian) 2.31.1
console: U-Boot> reset
console: resetting ...
PASS (0.46 s)
U-Boot is built by the Debian project, see:
https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
tests/acceptance/boot_linux_console.py | 28 ++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
index 3d442b6cd1..3b1952b2df 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -16,6 +16,7 @@
from avocado import skipUnless
from avocado_qemu import Test
from avocado_qemu import exec_command_and_wait_for_pattern
+from avocado_qemu import interrupt_interactive_console_until_pattern
from avocado_qemu import wait_for_console_pattern
from avocado.utils import process
from avocado.utils import archive
@@ -575,6 +576,33 @@ def test_arm_cubieboard_sata(self):
exec_command_and_wait_for_pattern(self, 'reboot',
'reboot: Restarting system')
+ def test_arm_raspi2_uboot(self):
+ """
+ :avocado: tags=arch:arm
+ :avocado: tags=machine:raspi2
+ :avocado: tags=u-boot
+ """
+ deb_url = ('https://snapshot.debian.org/archive/debian/'
+ '20190514T084354Z/pool/main/u/u-boot/'
+ 'u-boot-rpi_2019.01%2Bdfsg-7_armhf.deb')
+ deb_hash = 'ad858cf3afe623b6c3fa2e20dcdd1768fcb9ae83'
+ deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+ uboot_path = '/usr/lib/u-boot/rpi_2/uboot.elf'
+ uboot_path = self.extract_from_deb(deb_path, uboot_path)
+
+ self.vm.set_console()
+ self.vm.add_args('-kernel', uboot_path,
+ # VideoCore starts CPU with only 1 core enabled
+ '-global', 'bcm2836.enabled-cpus=1',
+ '-no-reboot')
+ self.vm.launch()
+ interrupt_interactive_console_until_pattern(self,
+ 'Hit any key to stop autoboot:',
+ 'Config file not found')
+ exec_command_and_wait_for_pattern(self, 'bdinfo', 'U-Boot')
+ exec_command_and_wait_for_pattern(self, 'version', 'U-Boot')
+ exec_command_and_wait_for_pattern(self, 'reset', 'resetting ...')
+
def test_s390x_s390_ccw_virtio(self):
"""
:avocado: tags=arch:s390x
--
2.21.1
next prev parent reply other threads:[~2020-02-15 19:27 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-15 19:22 [PATCH 0/8] hw/arm: Add raspi[0123] acceptance tests Philippe Mathieu-Daudé
2020-02-15 19:22 ` [PATCH 1/8] tests/acceptance/boot_linux_console: Use raspi console model as key Philippe Mathieu-Daudé
2020-02-17 8:25 ` Luc Michel
2020-02-15 19:22 ` [PATCH 2/8] tests/acceptance/boot_linux_console: Add raspi version=2 parameter Philippe Mathieu-Daudé
2020-02-17 8:26 ` Luc Michel
2020-02-15 19:22 ` [PATCH 3/8] tests/acceptance/boot_linux_console: Test the raspi1 console Philippe Mathieu-Daudé
2020-02-17 8:27 ` Luc Michel
2020-02-15 19:22 ` [PATCH 4/8] tests/acceptance/boot_linux_console: Test the raspi0 console Philippe Mathieu-Daudé
2020-02-17 8:27 ` Luc Michel
2020-02-15 19:22 ` [PATCH 5/8] tests/acceptance/boot_linux_console: Test the raspi1 AUX console Philippe Mathieu-Daudé
2020-02-17 8:28 ` Luc Michel
2020-02-15 19:22 ` Philippe Mathieu-Daudé [this message]
2020-02-17 8:28 ` [PATCH 6/8] tests/boot_linux_console: Test booting U-Boot on the Raspberry Pi 2 Luc Michel
2020-02-15 19:22 ` [PATCH 7/8] tests/boot_linux_console: Test booting U-Boot on the Raspberry Pi 3 Philippe Mathieu-Daudé
2020-02-17 8:28 ` Luc Michel
2020-02-15 19:22 ` [PATCH 8/8] tests/acceptance: Count Raspberry Pi logos displayed on framebuffer Philippe Mathieu-Daudé
2020-02-17 8:29 ` Luc Michel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200215192216.4899-7-f4bug@amsat.org \
--to=f4bug@amsat.org \
--cc=Andrew.Baumann@microsoft.com \
--cc=imammedo@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).