qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Kevin Wolf" <kwolf@redhat.com>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Thomas Huth" <thuth@redhat.com>, "Sergio Lopez" <slp@redhat.com>,
	"Eduardo Habkost" <ehabkost@redhat.com>,
	qemu-block@nongnu.org, "Michael S. Tsirkin" <mst@redhat.com>,
	"Laurent Vivier" <lvivier@redhat.com>,
	"Max Reitz" <mreitz@redhat.com>,
	"Alexander Bulekov" <alxndr@bu.edu>,
	"Bandan Das" <bsd@redhat.com>,
	"Stefan Hajnoczi" <stefanha@redhat.com>,
	"Marc-André Lureau" <marcandre.lureau@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Fam Zheng" <fam@euphon.net>,
	"Richard Henderson" <rth@twiddle.net>
Subject: [PULL 09/31] aio-posix: make AioHandler dispatch O(1) with epoll
Date: Sat, 22 Feb 2020 08:50:08 +0000	[thread overview]
Message-ID: <20200222085030.1760640-10-stefanha@redhat.com> (raw)
In-Reply-To: <20200222085030.1760640-1-stefanha@redhat.com>

File descriptor monitoring is O(1) with epoll(7), but
aio_dispatch_handlers() still scans all AioHandlers instead of
dispatching just those that are ready.  This makes aio_poll() O(n) with
respect to the total number of registered handlers.

Add a local ready_list to aio_poll() so that each nested aio_poll()
builds a list of handlers ready to be dispatched.  Since file descriptor
polling is level-triggered, nested aio_poll() calls also see fds that
were ready in the parent but not yet dispatched.  This guarantees that
nested aio_poll() invocations will dispatch all fds, even those that
became ready before the nested invocation.

Since only handlers ready to be dispatched are placed onto the
ready_list, the new aio_dispatch_ready_handlers() function provides O(1)
dispatch.

Note that AioContext polling is still O(n) and currently cannot be fully
disabled.  This still needs to be fixed before aio_poll() is fully O(1).

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200214171712.541358-6-stefanha@redhat.com
[Fix compilation error on macOS where there is no epoll(87).  The
aio_epoll() prototype was out of date and aio_add_ready_list() needed to
be moved outside the ifdef.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 util/aio-posix.c | 110 +++++++++++++++++++++++++++++++++--------------
 1 file changed, 78 insertions(+), 32 deletions(-)

diff --git a/util/aio-posix.c b/util/aio-posix.c
index b5cfdbd2f6..9e1befc0c0 100644
--- a/util/aio-posix.c
+++ b/util/aio-posix.c
@@ -35,9 +35,20 @@ struct AioHandler
     void *opaque;
     bool is_external;
     QLIST_ENTRY(AioHandler) node;
+    QLIST_ENTRY(AioHandler) node_ready; /* only used during aio_poll() */
     QLIST_ENTRY(AioHandler) node_deleted;
 };
 
+/* Add a handler to a ready list */
+static void add_ready_handler(AioHandlerList *ready_list,
+                              AioHandler *node,
+                              int revents)
+{
+    QLIST_SAFE_REMOVE(node, node_ready); /* remove from nested parent's list */
+    node->pfd.revents = revents;
+    QLIST_INSERT_HEAD(ready_list, node, node_ready);
+}
+
 #ifdef CONFIG_EPOLL_CREATE1
 
 /* The fd number threshold to switch to epoll */
@@ -105,7 +116,8 @@ static void aio_epoll_update(AioContext *ctx, AioHandler *node, bool is_new)
     }
 }
 
-static int aio_epoll(AioContext *ctx, int64_t timeout)
+static int aio_epoll(AioContext *ctx, AioHandlerList *ready_list,
+                     int64_t timeout)
 {
     GPollFD pfd = {
         .fd = ctx->epollfd,
@@ -130,11 +142,13 @@ static int aio_epoll(AioContext *ctx, int64_t timeout)
         }
         for (i = 0; i < ret; i++) {
             int ev = events[i].events;
+            int revents = (ev & EPOLLIN ? G_IO_IN : 0) |
+                          (ev & EPOLLOUT ? G_IO_OUT : 0) |
+                          (ev & EPOLLHUP ? G_IO_HUP : 0) |
+                          (ev & EPOLLERR ? G_IO_ERR : 0);
+
             node = events[i].data.ptr;
-            node->pfd.revents = (ev & EPOLLIN ? G_IO_IN : 0) |
-                (ev & EPOLLOUT ? G_IO_OUT : 0) |
-                (ev & EPOLLHUP ? G_IO_HUP : 0) |
-                (ev & EPOLLERR ? G_IO_ERR : 0);
+            add_ready_handler(ready_list, node, revents);
         }
     }
 out:
@@ -172,8 +186,8 @@ static void aio_epoll_update(AioContext *ctx, AioHandler *node, bool is_new)
 {
 }
 
-static int aio_epoll(AioContext *ctx, GPollFD *pfds,
-                     unsigned npfd, int64_t timeout)
+static int aio_epoll(AioContext *ctx, AioHandlerList *ready_list,
+                     int64_t timeout)
 {
     assert(false);
 }
@@ -438,36 +452,63 @@ static void aio_free_deleted_handlers(AioContext *ctx)
     qemu_lockcnt_inc_and_unlock(&ctx->list_lock);
 }
 
-static bool aio_dispatch_handlers(AioContext *ctx)
+static bool aio_dispatch_handler(AioContext *ctx, AioHandler *node)
 {
-    AioHandler *node, *tmp;
     bool progress = false;
+    int revents;
 
-    QLIST_FOREACH_SAFE_RCU(node, &ctx->aio_handlers, node, tmp) {
-        int revents;
+    revents = node->pfd.revents & node->pfd.events;
+    node->pfd.revents = 0;
 
-        revents = node->pfd.revents & node->pfd.events;
-        node->pfd.revents = 0;
+    if (!QLIST_IS_INSERTED(node, node_deleted) &&
+        (revents & (G_IO_IN | G_IO_HUP | G_IO_ERR)) &&
+        aio_node_check(ctx, node->is_external) &&
+        node->io_read) {
+        node->io_read(node->opaque);
 
-        if (!QLIST_IS_INSERTED(node, node_deleted) &&
-            (revents & (G_IO_IN | G_IO_HUP | G_IO_ERR)) &&
-            aio_node_check(ctx, node->is_external) &&
-            node->io_read) {
-            node->io_read(node->opaque);
-
-            /* aio_notify() does not count as progress */
-            if (node->opaque != &ctx->notifier) {
-                progress = true;
-            }
-        }
-        if (!QLIST_IS_INSERTED(node, node_deleted) &&
-            (revents & (G_IO_OUT | G_IO_ERR)) &&
-            aio_node_check(ctx, node->is_external) &&
-            node->io_write) {
-            node->io_write(node->opaque);
+        /* aio_notify() does not count as progress */
+        if (node->opaque != &ctx->notifier) {
             progress = true;
         }
     }
+    if (!QLIST_IS_INSERTED(node, node_deleted) &&
+        (revents & (G_IO_OUT | G_IO_ERR)) &&
+        aio_node_check(ctx, node->is_external) &&
+        node->io_write) {
+        node->io_write(node->opaque);
+        progress = true;
+    }
+
+    return progress;
+}
+
+/*
+ * If we have a list of ready handlers then this is more efficient than
+ * scanning all handlers with aio_dispatch_handlers().
+ */
+static bool aio_dispatch_ready_handlers(AioContext *ctx,
+                                        AioHandlerList *ready_list)
+{
+    bool progress = false;
+    AioHandler *node;
+
+    while ((node = QLIST_FIRST(ready_list))) {
+        QLIST_SAFE_REMOVE(node, node_ready);
+        progress = aio_dispatch_handler(ctx, node) || progress;
+    }
+
+    return progress;
+}
+
+/* Slower than aio_dispatch_ready_handlers() but only used via glib */
+static bool aio_dispatch_handlers(AioContext *ctx)
+{
+    AioHandler *node, *tmp;
+    bool progress = false;
+
+    QLIST_FOREACH_SAFE_RCU(node, &ctx->aio_handlers, node, tmp) {
+        progress = aio_dispatch_handler(ctx, node) || progress;
+    }
 
     return progress;
 }
@@ -639,6 +680,7 @@ static bool try_poll_mode(AioContext *ctx, int64_t *timeout)
 
 bool aio_poll(AioContext *ctx, bool blocking)
 {
+    AioHandlerList ready_list = QLIST_HEAD_INITIALIZER(ready_list);
     AioHandler *node;
     int i;
     int ret = 0;
@@ -689,7 +731,7 @@ bool aio_poll(AioContext *ctx, bool blocking)
         /* wait until next event */
         if (aio_epoll_check_poll(ctx, pollfds, npfd, timeout)) {
             npfd = 0; /* pollfds[] is not being used */
-            ret = aio_epoll(ctx, timeout);
+            ret = aio_epoll(ctx, &ready_list, timeout);
         } else  {
             ret = qemu_poll_ns(pollfds, npfd, timeout);
         }
@@ -744,7 +786,11 @@ bool aio_poll(AioContext *ctx, bool blocking)
     /* if we have any readable fds, dispatch event */
     if (ret > 0) {
         for (i = 0; i < npfd; i++) {
-            nodes[i]->pfd.revents = pollfds[i].revents;
+            int revents = pollfds[i].revents;
+
+            if (revents) {
+                add_ready_handler(&ready_list, nodes[i], revents);
+            }
         }
     }
 
@@ -753,7 +799,7 @@ bool aio_poll(AioContext *ctx, bool blocking)
     progress |= aio_bh_poll(ctx);
 
     if (ret > 0) {
-        progress |= aio_dispatch_handlers(ctx);
+        progress |= aio_dispatch_ready_handlers(ctx, &ready_list);
     }
 
     aio_free_deleted_handlers(ctx);
-- 
2.24.1


  parent reply	other threads:[~2020-02-22  9:00 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-22  8:49 [PULL 00/31] Block patches Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 01/31] virtio: increase virtqueue size for virtio-scsi and virtio-blk Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 02/31] aio-posix: avoid reacquiring rcu_read_lock() when polling Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 03/31] rcu_queue: add QSLIST functions Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 04/31] util/async: make bh_aio_poll() O(1) Stefan Hajnoczi
2020-03-16 16:42   ` Marc-André Lureau
2020-02-22  8:50 ` [PULL 05/31] aio-posix: fix use after leaving scope in aio_poll() Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 06/31] aio-posix: don't pass ns timeout to epoll_wait() Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 07/31] qemu/queue.h: add QLIST_SAFE_REMOVE() Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 08/31] aio-posix: make AioHandler deletion O(1) Stefan Hajnoczi
2020-02-22  8:50 ` Stefan Hajnoczi [this message]
2020-02-22  8:50 ` [PULL 10/31] softmmu: move vl.c to softmmu/ Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 11/31] softmmu: split off vl.c:main() into main.c Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 12/31] module: check module wasn't already initialized Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 13/31] fuzz: add FUZZ_TARGET module type Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 14/31] qtest: add qtest_server_send abstraction Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 15/31] libqtest: add a layer of abstraction to send/recv Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 16/31] libqtest: make bufwrite rely on the TransportOps Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 17/31] qtest: add in-process incoming command handler Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 18/31] libqos: rename i2c_send and i2c_recv Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 19/31] libqos: split qos-test and libqos makefile vars Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 20/31] libqos: move useful qos-test funcs to qos_external Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 21/31] fuzz: add fuzzer skeleton Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 22/31] exec: keep ram block across fork when using qtest Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 23/31] main: keep rcu_atfork callback enabled for qtest Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 24/31] fuzz: support for fork-based fuzzing Stefan Hajnoczi
2020-02-22 11:34   ` Eric Blake
2020-02-24 11:35     ` Stefan Hajnoczi
2020-02-27  2:50       ` Alexander Bulekov
2020-02-22  8:50 ` [PULL 25/31] fuzz: add support for qos-assisted fuzz targets Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 26/31] fuzz: add target/fuzz makefile rules Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 27/31] fuzz: add configure flag --enable-fuzzing Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 28/31] fuzz: add i440fx fuzz targets Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 29/31] fuzz: add virtio-net fuzz target Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 30/31] fuzz: add virtio-scsi " Stefan Hajnoczi
2020-02-22  8:50 ` [PULL 31/31] fuzz: add documentation to docs/devel/ Stefan Hajnoczi
2020-02-22  9:13 ` [PULL 00/31] Block patches no-reply
2020-02-24 11:33   ` Stefan Hajnoczi
2020-02-24 12:47 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200222085030.1760640-10-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=alxndr@bu.edu \
    --cc=bsd@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=fam@euphon.net \
    --cc=kwolf@redhat.com \
    --cc=lvivier@redhat.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    --cc=slp@redhat.com \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).